Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Accessories

$19.95
8-Bit System is a multi-fonction tools that regroup all potential needs in the field -01 and -02 : 8-Bit Multi-tool plier offer 17 functions: - Master link plier - Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits - Includes a tool for clearing tubeless valve stems and a spoke wrench - Storage for one set of quick links -03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on - Chain breaker - L key has a 3mm hex forked tire plug insert - Utility knife - Attach to 8-bit plier with magnets and short pins - Items for internal storage are sold separately -04 : 8-Bit Tire Lever + Rim Dent Remover add-on - Tire lever - Aluminum rim dent remover is designed for use with alloy rims - Attach to 8-bit plier with magnets and short pins -05 : Complete Kit Including Plier and both add-on
$19.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames
$19.95
The Wolf Tooth Bottle Shift is designed to offset a bottle to a more optimal location and make it possible to also mount a pump on frames with large downtubes. It is most commonly used on dual suspension frames where the water bottle is difficult to access because of interference with the top tube or shock. By shifting the bottle slightly off center and tilting it outward, clearance is greatly improved. - Slots and extra tapped holes in the mount provide 18mm of bottle position adjustment - Designed to be easily flipped to provide either left or right hand bottle access - Centerline of the bottle moves 18mm with the combined 10 degree tilt and 9 mm offset - Offset of pump bracket mounting holes allows mounting mini pumps on most mountain bikes
$19.95
This adapter tool alows for installation of the crown race without damaging seals. It is compatible with the Park Tool CRS-15.2 crown race setting tube. Internal o-ring retains this adapter on the setting tube during use and storage. CNC machined from aircraft grade aluminum billet. - Fits Park Tool CRS-15.2 crown race setting tube - Design and manufactured in Minneapolis, MN USA - Material - aircraft grade aluminum
$19.95
EnCase System bit set contains: - Spoke wrench - Valve core wrench - Flat head bit - Phillips bit - Hex key sizes: 2, 2.5, 3, 4, 5, 6, 8 mm - Torx compatible sizes: T10, T25, T30
$19.95 - $29.99
Flat wrench inserts from Wolf Tooth turn your flat wrench into many other tools. - All inserts are 1 inch hex drive interface compatible - Design and manufactured in Minneapolis, MN USA - Nickel plated 4140 chromoly steel
$22.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts
$24.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Long, four-slotted mount allows two, smaller bottles to be mounted in-line - Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts
$24.95 - $34.95
The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads
$24.95
B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base
$24.95
B-RAD Everywhere Base 2
$24.95
The Wolf Tooth B-RAD Everywhere Base allows you to position bottle cages or accessories anywhere on your bike frame. - Hook and loop, silicone-backed straps keep base securely in place - Crafted from lightweight, durable, rust-proof aluminum with ED-coated hardware - Requires use of both straps for secure installation - 2-Bolt configuration
$24.95
B-RAD Half Bottle Mounts allow for cargo customization and cargo optimization. Designed to work in tandem with B-RAD Base, the Half-Bottle Adaptor moves the bottle over about half a bottle radius to make it easier to access. The Accessory strap mounts can be mounted to the other side providing a mounting point for additional items. - Mounts to the B-Rad base mount (not included
$24.95
The Wolf Tooth Morse Cage has its name because of the dots and dashes on the mounting plate that provide for up to 32mm of vertical placement adjustment. This allows the rider to change bottle cage position based on restrictions of frame size, frame bags, or mount placement. - Hand-bent hollow tubing - Fits any bike frame that has two standard bottle cage mounts with 64mm spacing - Easily bent back in to shape if damaged - Made by hand in Minnesota
$24.95
Wolf Tooth WT-G Precision Bike Grease is a waterproof, synthetic oil-based lubricant for cycling-specific applications. It reduces friction on moving components while protecting them from contaminants, water, and corrosion. WT-G also prevents non-moving components from seizing together due to corrosion or galling. This is a grease that can be used on bottom brackets, hubs, headsets, general bicycle assembly, and more. - Maintains low viscosity for consistent performance from -60ºF to 360ºF (roughly -50ºC to 180ºC) in all conditions - Creates smooth, easy component movement for low energy loss - Long-lasting lubrication for extended bearing and component life - High resistance to oxidation and corrosion - Can be used on steel, aluminum alloy, titanium, and carbon fiber. Applications: - hub bearings - free hubs - pedals - headsets - bottom brackets - suspension pivots - general assembly
$29.95
The Wolf Tooth Axle Handle Multi-Tool is a minimalist, lightweight option to cover 10 essential tool functions. It is stored at the end of a Wolf Tooth rear 12mm or front 15mm axle during rides as a multi-tool that is easy to access for quick adjustments and trailside fixes. An O-ring on the inside of the axle locks the Axle Handle Multi-Tool in place so it is secure while riding. Wolf Tooth front 15mm axles machined after March 2023 have this O-ring included, while Wolf Tooth rear axles require a threaded nut to be added to the end of the axle. This nut is shown in the product photo above and included in the package when purchasing the multi-tool. On one side of the handle is a 5mm hex end stepped to 6mm closer to the handle that fits into the end of an axle. The other side of the handle has a 4mm opening for double-sided hex bits that nest on the inside of the handle via magnet. It was designed for Wolf Tooth axles, though is compatible on other axles that have a threaded end. Four hex bits are included with the Axle Handle Multi-Tool. Two bits can then be selected to be stored in the back of the tool based on the functions that you use the most. Each bit has two functions. So if you find yourself frequently reaching for the 4mm hex on a multi-tool in your frame bag, the Axle Handle Multi-Tool makes it quickly available and always within reach, without needing to unpack your tool wrap on the trail. Four hex bit options are included, allowing the cyclist to select functions most frequently used: 2, 2.5, 3, and 4mm hex; flat head #3.5 and Phillips #2 screwdrivers; and T10 and T25 Torx-compatible Designed for Wolf Tooth rear axles and 15mm front axles. The nut to thread into the rear axle is included Available in eight colors to match other Wolf Tooth anodized components and accessories Designed, engineered, and machined at Wolf Tooth in Minnesota with 6061-T6 aircraft-grade aluminum
$29.95
B-RAD Everywhere Base 3
$29.95
Be rad with the B-RAD System, the ultimate Bottle Relocation and Accessory Device. Mount your bottles away from inconvenient rear shocks, add storage room for tools or tubes below a bottle cage, and provide space for a second bottle on sufficiently long downtubes—all with one patented design. Our handy 1-1 template helps you determine which Base measurements match your frame and our selection of B-RAD Replacement Parts ensures you’ll never go without a particular feature or strap. Stay hydrated and prepared on every ride by carrying your essentials right where you need them! Half Bottle Adapter lets you offset the bottle cage location to make your bottle more accessible, and to fit additional accessories like a pump, tool, tube, etc. - Easy to access bottles and out of the way of legs - Easy to install using existing cage mounts on a bike (B-RAD Base component required; sold separately) - Use the DogBone base for curved downtube frames Great for trail, enduro, bike packing, XC, and town/commuting applications. The B-RAD Mini Strap and Accessory Mount were designed especially for the Half Bottle Adapter so it could be mounted to the side of the bottle. But you can customize it to fit your needs. Works great with modern trail bikes from companies like Pivot, Intense, and Santa Cruz or others with difficult bottle access. Tech Specs: - Material: 6061-T6 aluminum brackets - Weight: 18g - Maximum load: 1700g - Tools Needed: T25 Torx - Torque: 3-4 Nm - Made in the USA
$32.95
The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links
$32.95
The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links
$34.95
BarBag is designed to let you take your adventure farther.  Providing easy to access on-the-bike storage, it allows for one handed opening and closing on the go. Its Magnetic MagCro latch keeps things closed no matter the riding conditions and its design does not interfere with standing and pedaling. - Secure and easily accessible on the bike nutrition/phone/wallet/tool storage - Clear lid with automatic MagCro(TM) latch allows riders to easily access contents even in the roughest of conditions - Exact shaping to fit on the side of the stem while allowing standing pedaling without knee interference - Dimensions (trapezoidal shape):16cm x 7 cm x 5 cm and 7 cm deep (0.6 liter capacity) - GPS/Bike Computer bumper provided for spacing the bag away from the stem
$34.95
Easily carry everything you need for trailside repair, in a secure out-of-the-way location. The engineered design and rubber material of the sleeves keeps everything securely in place, prevents the multi-tools from rattling, and protects the multi-tools from dirt and moisture while still being simple to remove without tools. Extra space was created in the bar plugs to store a Presta-to-Schrader adapter and valve core or a master link for support on the trail. - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Included Drop Bar Fit Kit to customize fit for larger-diameter road handlebars - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)
$39.95
The new Wolf Tooth 6-Bit Hex Wrench is a slim, strong multi-tool with 11 functions for common bike repairs and everyday needs. Six hex bits are stored inside the handles that fit into the end of a ball detent swivel head for use. The 11 functions include: 2, 2.5, 3, 4, 5, 6, and 8mm hex; flat head #3.5 and Phillips #2 screwdrivers; and T10 and T25 Torx-compatible bits. All bits are ED-coated and corrosion-resistant. It is small enough to fit into a riding tool wrap or pocket, and has an optional keyring attachment to fit on any keychain for use away from the bike. The keyring attachment is an option for those who like to have a multi-tool on or off the bike for everyday-carry needs. The 6-Bit Hex Bit Wrench is locked shut while the keyring is attached. This prevents it from opening while you’re on the go. Then when you need to use the multi-tool, press the end of the keyring attachment to detach it from your keyring. When you’re done using it, close the handles and click it back onto the keyring attachment to lock it shut once again. The handles also have a magnetic closure to keep it closed when the keyring attachment is not connected. • All bits are ED-coated and corrosion-resistant • Magnets keep all bits in place and secure • Ball detent swivel head tested to over 40Nm of torque • Same bits as 8-Bit System and EnCase System multi-tools • Optional ball detent keychain locks multi-tool closed
$39.95
The B-RAD pump bag protects your frame pump from water and dirt ensuring it is working when you need it. - Mounts to the B-RAD system or on its own - Dimensions: 12 in x 2.5 in x 2.5 in (30 cm x 6.5 cm x 6.5 cm)
$39.95 - $44.95
Wolf Tooth B-RAD Tek-Lite Roll-Top Bags offer extra cargo space for carrying riding essentials on your frame. These bags are crafted from the lightweight, water-resistant, and durable Tek-Lite material, and have sealed seams that will protect bag contents from water, dirt, and other road/trail debris. - Bags offer the capacity to carry multi-tools, small hand pump, spare tube, and/or snacks - Can be attached under a saddle, strapped to a frame with silicone-lined straps, in a bottle cage, or onto any B-RAD Base - Slim, streamlined design that will stay out of the way of cranks and pedaling legs
$39.95 - $51.95
The Morse Cargo Cage is designed to increase a bike’s carrying capacity. This was created for bikepacking, self-supported races, and rides that just require more gear. The Morse name extends the popular dot-dash mounting pattern that allows for 35mm of vertical adjustment, which is also featured on Wolf Tooth Morse Bottle Cages. It will fit on a fork three-pack mount or anywhere on the frame that has bottle bosses. The Morse Cargo Cage also has bolt mounting points on the angled sides for additional versatility. It is made here in Minnesota, USA from durable, corrosion-resistant 5052 aluminum. - Cage can be purchased with two 20" Wolf Tooth Cargo Straps; straps can also be purchased individually - Designed to fit standard 64mm bolt-spaced 3-pack mounts - Vertical positioning adjustment up to 35mm with Morse dot-dash mount pattern - Mount options in center of cage, as well as on right and left sides; use included spacers when mounting the cage by its side - Designed to fit fork bags, 32 oz. Nalgene bottles, large burritos, and more - Three stainless steel bolts and plastic spacers included - Replacement parts available
$44.95 - $49.95
Wolf Tooth B-RAD Tek-Lite Roll-Top Bags offer extra cargo space for carrying riding essentials on your frame. These bags are crafted from the lightweight, water-resistant, and durable Tek-Lite material, and have sealed seams that will protect bag contents from water, dirt, and other road/trail debris. - Bags offer the capacity to carry multi-tools, small hand pump, spare tube, and/or snacks - Can be attached under a saddle, strapped to a frame with silicone-lined straps, in a bottle cage, or onto any B-RAD Base - Slim, streamlined design that will stay out of the way of cranks and pedaling legs
$44.95
This lightweight chainwhip is strong enough to be your go to chainwhip, but light enough that you won't need to leave it at home when on the move. - Compatible with any cassette up to and including 12 speed cassettes - Design and manufactured in Minneapolis, MN USA - 7075-T6 Aluminum
$44.95
This ultralight hex and bottom bracket wrench has a 1-inch hex at one end and an external BB cup spline at the other end. The 1-inch hex end features magnets that quickly couple with Wolf Tooth's steel hex insert tools. - 1-inch hex drive at one end and 16-notch 44mm bottom bracket tool (or centerlock rotor tool) at the other end - Includes the wrench only. Steel inserts are not included but can be purchased separately - 1-inch hex drive interface compatible. Magnets inset allow quick coupling and decoupling of steel inserts
$49.95
Fix tubeless tire punctures and broken chains. This multi-tool has a chain tool on one end and a tire plug built into the handle, with inner storage for tubeless tire plugs. The full multi-tool was designed for use with an EnCase System Storage Sleeve, which fits inside bar ends of your handlebars. Ride with this multi-tool in a storage sleeve or in a tool wrap for easy repairs while riding. - Compatible with all bicycle chains, including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five bacon strip tire plugs included; refills available - Hardened steel chain pin driver for lifetime durability - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (sold separately) or carry in a jersey pocket - Chain tool driver requires 4mm hex (available on EnCase System Hex Bit Wrench) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)
$49.95
Make simple trailside or roadside repairs with this multi-tool that has 14 functions. An 8mm hex head has a 4mm insert to fit each of the eight attached hex bits. With its slim design, this multi-tool can be stowed inside an EnCase System Storage Sleeve to be carried in handlebar ends as it was designed, or a mainstay on any home workbench. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (sold separately) - Magnet on bottom end of tool allows for storage on steel bike stands - Fits all standard mountain handlebars and most drop bars (except being ergonomic drop bars that have hard angles in the drops)
$49.95
The Tool Wrap was designed to make trailside repairs quick and efficient. Featuring multiple flaps that allow you hang it from a wall, act as a changing area foot pad and more, the Tool Wrap is the perfect trailhead companion. - Top flap that can be shut in a car door for a mobile workshop - Bottom flap provides a work space to keep your parts and tools out of the dirt when working on the ground - Pocket layout is ideal for all the tools you need to build a bike - Aluminum eyelets for hanging up in your home or work shop - Dimensions: 68 by 46 cm (main body), 60 by 20 cm top flap (for car door), 32 by 60 cm bottom flap (work space), rolled up diameter size varies
$69.95
8-Bit System is a multi-function tool that regroups all potential needs in the field -01 and -02 : 8-Bit Multi-tool plier offer 17 functions: - Master link plier - Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits - Includes a tool for clearing tubeless valve stems and a spoke wrench - Storage for one set of quick links -03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on - Chain breaker - L key has a 3mm hex forked tire plug insert - Utility knife - Attach to 8-bit plier with magnets and short pins - Items for internal storage are sold separately -04 : 8-Bit Tire Lever + Rim Dent Remover add-on - Tire lever - Aluminum rim dent remover is designed for use with alloy rims - Attach to 8-bit plier with magnets and short pins -05 : Complete Kit Including Plier and both add-on
$69.95 - $69.99
The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead. - 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut - Magnets keep all bits in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar for extra torque when head is bent - 8mm hex bit tested to over 40 Nm torque - Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) - Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)
$69.95
The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead. - 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut - Magnets keep all bits in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar for extra torque when head is bent - 8mm hex bit tested to over 40 Nm torque - Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) - Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)
$69.95 - $89.95
The Wolf Tooth Morse Cage has its name because of the dots and dashes on the mounting plate that provides for up to 32mm of vertical placement adjustment. This allows the rider to change bottle cage position based on restrictions of frame size, frame bags, or mount placement. - Hand-bent hollow tubing - Fits any bike frame that has two standard bottle cage mounts with 64mm spacing - Easily bent back into shape if damaged - Made by hand in Minnesota SPECIFICATIONS - Bottle Type: Standard - Material: Titanium - Color: Silver - Access Style: Top - Mount Type: Bolt-On - Weight: 33g
$69.95
- The Wolf Tooth Morse Cage is a lightweight and low profile way to reposition bottle cages. - Named for its dot-dash-dot-dash mounting pattern, the Morse Cage base plate offers four positions across 32mm of vertical adjustment, fully capturing one mounting bolt in every position to prevent movement. - Can be bent back into shape if damaged, and is available in both titanium and stainless steel
$114.95
This aluminum wrench and insert kit is designed to provide a bike tool solution that is compact and lightweight enough to carry with you on the road but still be durable enough for everyday use. The aluminum wrench has magnets that hold the nickel plated steel inserts in place. The wrench has splines for bottom brackets and centerlock rotors and the four included inserts cover most common bike applications. This kit includes: - Pack Wrench - ultralight 1" hex and bottom bracket wrench - Ultralight Cinch and ISIS Spline Wrench Insert - older ISIS bottom brackets or the Race Face Cinch direct mount chainring system - Ultralight Cassette Lock Ring Wrench Insert - cassette lockrings and some centerlock rotor lockrings - Ultralight 8mm Hex Wrench Insert - pedal removal and other 8mm hex applications - Ultralight 16mm Hex Wrench Insert - Race Face Cinch aluminum spindle bolts, frame pivots, and other 16mm hex applications All inserts are made in the USA and CNC machined from hardened steel with electroless nickel plating. Compatibility - Designed for use with most modern mountain and road bikes. - 1-inch hex drive interface compatible Related Products - Pack Whip - Ultralight chain whip - Pack Pliers - Master Link Combo Pliers Tech Specs - Weights: Pack Wrench • 88g | Cassette Lock Ring Wrench Insert • 31g | Cinch and ISIS Spline Wrench Insert • 56g | 8mm Hex Wrench Insert • 63g | 16mm Hex Wrench Insert • 78g - Material: wrench • aluminum | Inserts • nickel-plated 4140 Chromoly steel -Made in the USA
$119.95
In-bike storage and essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customizable rubber flap that can be cut to meet your handlebar inner diameter. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (included) - Magnet on bottom end of tool allows for storage on steel bike stands (or refrigerators) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops) - Chain & Tire Plug tool compatible with all bicycle chains including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five strips included; refills available - Hardened steel pin for lifetime durability - Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench - Storage sleeves made of vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Includes Drop Bar Fit Kit to customize fit for larger-diameter road handlebars
$119.95
The Pack Hanger Alignment Tool allows quick adjustments to be made to the derailleur hanger while on the trail or in the workshop. Alignment fixes are quick and intuitive, as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. And for simple and durable storage, the components of this tool also nest inside of the handle. - Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle. - Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing. - Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required. - Works on 12mm thru axle bikes
$139.95
8-Bit System is a multi-fonction tools that regroup all potential needs in the field -01 and -02 : 8-Bit Multi-tool plier offer 17 functions: - Master link plier - Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits - Includes a tool for clearing tubeless valve stems and a spoke wrench - Storage for one set of quick links -03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on - Chain breaker - L key has a 3mm hex forked tire plug insert - Utility knife - Attach to 8-bit plier with magnets and short pins - Items for internal storage are sold separately -04 : 8-Bit Tire Lever + Rim Dent Remover add-on - Tire lever - Aluminum rim dent remover is designed for use with alloy rims - Attach to 8-bit plier with magnets and short pins -05 : Complete Kit Including Plier and both add-on
$139.99
The 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes to keep you rolling to the trailhead or next town. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. The three neatly nest together using magnets and clever machining for compact storage. 8-BIT PACK PLIERS MULTI-TOOL has 17 functions. On one end of the multi-tool, an 8mm hex swivel head serves as a driver for the bits that are stored inside: flat head #3.5 and phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, and 6mm hex; and T10 and T25 Torx-compatible bits. A spoke wrench and valve core wrench are stored on the back and a rasp is on the inside of the upper handle for clearing sealant from valve stems. On the other end of the multi-tool, pliers for master link installation/removal and tightening/loosening of valve stem nuts. 8-BIT TIRE LEVER + DISC BRAKE MULTI-TOOL A double-sided multi-tool with a tire lever on one end and disc brake support on the other. The high-strength plastic lever easily removes tires without damaging the rim. On the machined end of the multi-tool, an 8mm flare wrench can open and close the compression nut on hydraulic brakes and there is a slot for truing rotors. 8-BIT CHAINBREAKER + UTILITY KNIFE MULTI-TOOL has four functions. It has a chainbreaker on one end and a retractable utility blade on the other. The chain tool is operated by an included 3mm hex L key that doubles as a tire plug inserter. A machined slot fits the L key and converts the entire multi-tool into a tire plug inserter, with the forked end of the L key extending outward. The handles of this multi-tool slide open to provide storage for tire plug inserts, a valve core, and a spare mini utility blade. The fourth function is the 16mm chainbreaker head that can be used to tighten a loose crankarm during rides.
$144.95
The Pack Hanger Alignment Tool allows quick adjustments to be made to the derailleur hanger while on the trail or in the workshop. Alignment fixes are quick and intuitive, as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. This new tool has included options for QR and thru axle. And for simple and durable storage, the components of this tool also nest inside of the handle. - Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle. - Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing. - Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required. - Works on 12mm thru axle and 5mm quick release bikes
$8.00
Sold as 3 pairs (6 pieces) Foam spaces help to push your bar bag away from the bars, freeing up room for your cables, fingers, bell, or heck, even a small lizard! Our spacers are Die-cut right here in the UK from a very high quality and high-density PE Foam. We believe this makes them the best made in UK spacers available. Perfect for Lil Prestos or if you're running your Shazam on the front. Made in Birmingham, UK
$23.89 - $36.75 $36.75 Up to 35% Off
The Mag-Neato is perfect for keeping your small things organised. Comfortably fits a road sized tube and a few tools, we've heard it also works well for Sylvanian Family dolls. Made with a 1000D cordura outer fabric and lined with a recycled polyester lining for extra durability, the pocket is made from a super snazzy stretch cordura which expands for bigger tools or larger Sylvanians. Chuck it in your frame bag, backpack or even strap it under your seat. Featuring an eye-catching diagonal detail to keep you looking cool in a puncture emergency. The Fid-Lock magnetic buckle is super secure and fun to use. It's simple and it's light, it's Neato! It's Mag-Neato! Made in-house, London, UK
$34.13 - $55.65 $52.50 - $55.65 Up to 35% Off
Teeny Houdini is an easy to install, minimal saddlebag designed to hold a tube, tire lever, multi tool, CO2 and even a couple of nice rocks you might pick up along the way. Why not free up space in your bar bag (for more snacks) by keeping your boring things in the rear, or set and forget so you're never caught unprepared for a puncture (or snack) emergency again! Available in two sizes; small, designed to fit a road tube, and medium, for a gravel/road plus/mtb tube. The Flap style opening allows the bag to adjust in size, just in case you find that must keep rock. Fastened with a Fidlock magnetic buckle (and a satisfying click!) the Teeny Houdini makes it easy to access your teeny things while it's still on the bike. Made in-house, London, UK
$47.78 - $92.40 $73.50 - $92.40 Up to 35% Off
Slim, sturdy and oh-so easy to access, Go-Go sits neatly atop your top tube like a little cyclist's fuel tank; fit a perfect wedge of cheese or an expertly tailored sandwich, and with a port for cables, Go-Go's great for gadgets too! While a staple of the bikepacking diet, Go-Go is an excellent bag for any ride no matter the distance. Definitely our fastest looking and most easily accessible bag; perfect for when stopping is a no-no and you gotta get at ya stuff on the go-go! Go-Go is extremely stable on any shaped top tube thanks to its super grippy hypalon daisy chain and three Veclro One-Wrap straps. Two recycled HDPE inserts give Go-Go its super sharp shape and make it a breeze to open and close with one hand.
$47.78 - $78.75 $73.50 - $78.75 Up to 35% Off
Do you long to carry your snacks within easy reach? Want your drink bottle to ride upfront for on-the-go hydration? Need to transport your keys, lip balm and phone but lack the necessary pockets? A Voila Stem Bag might just be the bag for you. Great on its own or part of a more adventurous bikepacking set up. An easy one-handed opening/closing system means you can access your snacks while you're on the go! Built with high density foam padding that protects your valuables and offers insulations for your hot/cold beverages. Constructed with a floating liner to facilitate easy crumb removal. The removable lower strap and included cordlock facilitate a huge range of mounting options no matter your bar or stem. Mini Velo and Brompton compatible. Made in-house, London, UK.
$55.97 - $86.75 $86.10 - $86.75 Up to 35% Off
This charming wee bag mounts to either handlebars or saddles (with saddle loops. i.e., Brooks) and is designed for happy-go-lucky scamps that need to be prepared for anything. Big enough to stash an extra layer, keep your phone to hand and carry your lunch, the Lil Presto! is the perfect companion for a day out, whatever kind of rider you are. Maybe you need to carry some spare socks, travel scrabble, or a whole lot of pesto? Be our guesto with a Lil Presto! By choosing a hard-shell construction the Lil Presto benefits from one handed on the bike access and exceptional stability. This stability is further increased by the included Voile Nano Straps, which won't mark your carbon bars. The YKK Aquaguard Zip and Cordura fabric help to protect your contents from the elements whilst maintaining ease of access. Made in-house, London, UK
$79.95 - $136.50 $123.00 - $136.50 Up to 35% Off
The ultimate bikepacking bag, the framebagracadabra frame bag utilises the space within the main triangle and doesn't require any racks or mounts; your stuff is neatly snugged in your bike's belly, with no opportunity for bounce or waggle. Perfect for storing an extra layer and snacks on day rides or as part of a full bikepacking set up. By keeping heavy things near the centre of your bike, you can carry those tools and cans of soup without compromising your bike's handling. A recycled HDPE plastic bottom helps maintain its cute dogfish shape, whether empty or full. Elastic webbing at the top takes the strain off the zipper when the bag is full, helping to prolong the life of the zip. A mesh pocket inside allows you to separate your good snacks from your emergency snacks, for the most efficient snack stops. Includes multiple removeable and adjustable straps for a great fit! See our Fit Guide here and find your perfect fit. Made in-house, London, UK
$154.93 - $252.00 $238.35 - $252.00 Up to 35% Off
I think we can all agree that baskets are rad, but why not take your basket to the next level with an Alakazam basket bag!? With its expanding capacity and super quick attachment to the bike, Alakazam is the best companion for around town errands. Out in the wilds, you have an amazingly secure and easy to access bag that puts most bikepacking bags to shame. If you're a throw and go kinda person, then perhaps basketpacking is for you. Designed to fit oh so snuggly in the classic Wald 137 & 139 baskets. The rolltop design means the Alakazam can hold huge loads, but we know sometimes you need to carry something just a little bit bigger… like a pizza… Or four of them! The included "Pizza Straps" make attaching even the biggest load a breeze. Foam padding on the lower section of the bag provides a little bit of cushion to protect your things. A one-piece floating liner means the Alakazam is the most weatherproof bag we make. Made in-house, London, UK.
$227.00 - $252.00
For the adventurous among you that need to carry more stuff, the Shazam! saddle bag is here for all your advanced stuff carrying needs. Got a bikepacking trip this weekend? Maybe you just need to carry lots of stuff with you on the daily commute and you're sick of tying your jumper around your waist? With a sizable carrying capacity, able to be used on the bars or saddle, and the added bonus of looking cute on and off the bike, Shazza will most certainly snazza up any ride. Available in two sizes, the Mini size is a perfect bar bag for long day rides, or a great saddle bag for smaller riders. The Regular size is the go-to for bigger folks and bigger trips. Constructed with a plastic sheet and reinforced at the attachment bar with an aluminium length, Shazam is the most stable saddlebag out there. The expanding rolltop and long flap provides adjustable and flexible carrying capacity (we see you emergency grocery trip!). Made in-house, London, UK
$240.56
The Hobgob is our premium mid-size Hip Pack, big enough to swallow everything you need for a day in the woods or gobble up all your special items on longer bikepacking trips. For maximum all day comfort Hobgob has its buckles moved away from your tummy and onto the wide padded wing. There is a structured and padded back panel, with airflow channel to help keep you cool. The belt will fit waists up to 55” / 140cm, or bigger if you go Custom. Gear organisation is taken care of thanks to a large zippered front pocket and two internal elasticated mesh drop pockets featuring a key leash and clip, as well as an elastic bungee system under the bag perfect for stashing a jacket. The optional Quick Draw Bottle Pocket provides secure storage of, and one-handed access to a bottle whilst riding. Made in-house, London, UK Features - Key Leash and clip - Molle attachment on right wing for optional bottle attachment - Fidlock hook main buckle - Two spacious elastic mesh drop pockets inside - Reflective detailing - Optional bottle pocket has full 1-handed use - Air flow channel and spacer mesh keep you cool - Wide wings for max comfort - Wide 40mm strap Specifications - Volume: 4.8L - Belt Size: To fit up to 55" / 140cm - Dimensions: 30cm Wide x 17cm High x 9cm Deep - Weight: 425g + 60g for Bottle Pocket
$11.90
- Add to older versions of the SuperStand to extend height to accept 29er wheels
$12.38
The Willworx ‘CONNECTORS’ allows the individual Superstands to be connected in an unlimited number of configurations to suit every bicycle shop layout, size, and display area. They can be staggered to the right or left, side by side, back to back, etc. Some of the configurations are shown here. The CONNECTORS also allow the Superstands to be adjusted closer or further apart, as required for some bicycles with wider handlebars, or to position the bicycles closer where minimum floor space is available. Parking the bicycle with the rear wheel and staggered allows more bicycles to be on display.
$39.90 - $51.90
- Shop quality bicycle display and storage stand - Graphite ripple powdercoat over steel construction - Four-Point, Foam rubber end-Cap feet - 2 Piece design disassembles for space-Efficient storage - Standard and extreme models feature welded base construction (Extreme model accepts up to 3 inch tires) - Retail model features flat-Packed, Bolt-Together base construction - Fat rack features flat-Packed, Bolt-Together base construction and will suit tires from 3.8" To 5" with three width positions, 4.25", 4.75" And 5.25"
$45.00
The Superstand suits all BMX, Racing and Mountain bicycles and allows safe, efficient, bicycle parking either singularly or in multiples. - Ships flat and presses together - Modular and expandable system for display - Use Connectors (sold separately) to lock individual stands together - Use Poly-Foam Spacer kits to adapt to road tires - Top hoop press fits on to base-does not include screws SPECIFICATIONS - Rack Type: Free Standing Bike Rack - Mount Position: Wheel - Number of Bikes: 1 - Maximum Tire Width: 3.25"
$204.33
- Set includes 8-19mm wrenches - 12 point dual pawl ratchet for better contact - Ratchet lever on wrench is easily accessible for direction changes - Supertorque corners on open end provides extra turning power - High polished chrome finish is durable and cleans easily - Includes plastic storage tray
$15.00
Tramp artwork drawn by Scott Christopher on a Specialized Purist 22oz bottle. This design pays tribute to the legendary cartoonist and illustrator Vaughn Bode who's characters have become icons in the counterculture and tattoo worlds. - Purist bottles don't retain taste and are mold and stain-resistant. - Made in USA - Free of BPA and printed with non-toxic inks
$16.00
Our Nick Potts artwork on Specialized Purist 26oz bottle. Purist bottles don't retain taste and are mold and stain-resistant. - Made in USA - Free of BPA and printed with non-toxic inks