Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Accessories

Thule RoundTrip Sport
$399.95
Thule's RoundTrip Sport is a UPS/airline-approved heavy-duty travel case for your road, mountain, or cyclocross bike. • Durable polyethylene construction with integrated wheels for easy transport • Dividers keep wheels separated from frame • 47" x 30.5" x 10.5" (outer), 45" x 28.5" x 10" (inner)
Sunlite Convertible Trailer Tot
$397.99
Bike, walk, or jog to your favorite local activities with your children thanks to Sunlite's versatile Convertible Trailer Tot. Adjustable seats sit two children comfortably and a steel, powder-coated frame with bumper guards keeps your precious ones safe. The Trailer Tot's 600D polyester covering provides shade and protection, while 20-inch, aluminum, quick-release wheels roll smoothly down the road. So stow some snacks and toys in the rear compartment, grab coffee for the cup holder, and go explore your neighborhood.
Park Tool Bottom Bracket Facing Set
$385.95
Park Tool's Bottom Bracket Facing Set is designed to be a complete self-contained facing set, combining top-quality precision parts with ease of use. Simply install the threaded inserts using the facer handle, then insert the facing tool through the guides and install the tension spring and speed nut. After applying a liberal amount of cutting oil, the BFS-1 easily cuts the shell material, giving you a clean, faced surface. Now you're ready to install the bottom bracket. The English threading inserts are included. The Italian threading (36 x 24) inserts are available as an accessory, as part #688. Two are required.
SRAM eTap AXS BlipBox
$385.00
Significantly smaller, the SRAM eTap AXS BlipBox is now easier to integrate — mounting inside a stem faceplate cap, feed box, or frame. It's also AXS enabled, for easy personalization. Simple, intuitive, aero. - Replaces standard drop bar shift levers - Simple and intuitive eTap shift logic - AXS enabled for easy personalization - Limitless aero configurations - Two ports per side for Blips - Fits the included optional stem mount - Compatible with existing eTap Blips and Clics - Mounts inside stem faceplate cap, feed box or frame
RockShox BoXXer Charger Damper Upgrade Kit
$384.00
Now you can update your 2010+ BoXXer Race, Team, RC, R2C2 and World Cup with the Charger Damper Upgrade Kit. The Charger is RockShox’s insanely refined damper, and its sealed construction with an expandable rubber bladder ensures damping consistency, reduces vibration, and is almost 100 grams lighter than the previous BoXXer damper. Adjustment is easy and intuitive, with a single compression adjuster and a beginning stroke rebound adjuster with a factory set Rapid Recovery tune. The internal shim stacks can be re-tuned for light or firm compression and rebound settings. Includes damper, syringe, and suspension fluid.
Quarq ShockWiz Direct Mount
$379.00
ShockWiz is a suspension tuning system for air-sprung mountain bikes that combines high-tech hardware with an intuitive smartphone app. Lightweight, durable and powered by a long-lasting coin cell battery, ShockWiz automatically records and evaluates suspension performance every time you ride. The ShockWiz app displays straightforward adjustments that unite bike, terrain and riding style. ShockWiz works for all mountain bike riders, regardless of their experience or bike's intended use. It works on hardtail and dual suspension bikes, and for all levels of skill, speed and terrain. With ShockWiz, you know exactly how your suspension is performing – and how to make it better. The Direct Mount version is for inverted forks such as the RockShox RS-1. Features & Benefits: - Automated tuning recommendations. - Shock tuning score - a snapshot of how well your suspension is set up for you. - Works on hardtail and dual suspension bikes. Works for Cross-Country, Trail, All Mountain and Downhill. - Inexpensive, replaceable CR2032 battery lasts for months. - Waterproof and dustproof - IP67 rating. - Two alternative hoses (included) offer a range of fitting options. - Smartphone app is compatible with Apple and Android phones. Essential Details: - ShockWiz is designed for all mountain bike riders, regardless of your experience or bike's intended use. - You can tune for every riding style: Efficient (pedaling), Balanced, Playful or Aggressive. - Advice for air pressure, spring rate, compression and rebound is displayed in the intuitive smartphone app. - In the box: ShockWiz hardware, two hoses, adapter for conventional forks and rear shocks, rubber mounting boot and zip ties.
Park Tool Thru Axle Tap Set
$373.95
Frame and Fork Taps will become a lifesaver at some time for virtually every mechanic. These taps are made of high-carbon steel and are precision ground. Park Tool's Frame and Fork Taps cut easily and fit conventional tap handles. - Tap-12.1: 12Mm X 1.0 - Tap-12.2: 12Mm X 1.5 - Tap-12.3: 12Mm X 1.75 - Tap-15.1: 15Mm X 1.0 - Tap-15.2: 15Mm X 1.5 - Tap-20.1: 20Mm X 1.0 - Tap-20.2: 20Mm X 1.5 - Tap-20.3: 20Mm X 2.0
Burley Nomad
$369.99
Everywhere you pedal, Burley's Nomad is your ideal tag-along. Its simple-to-use hitch and two-wheel design offer reliability on and off the road without compromising bike handling. And, with a generous 100-pound hauling capacity, this sub-15-pound cargo trailer totes tons of gear. Tent. Hibachi. Cooler? Now there's no excuse to leave anything home! • Two-wheel design keeps the trailer upright and stable • Large carrying capacity with collapsible inside space divider • Three large mesh pockets for small items • 6 interior clips to tie down gear • Quickly disassembles and is compact for transport and storage • Forged aluminum hitch • 16” spoked aluminum wheels Includes: • Trailer with cover • Tow arm and hitch for bicycle use • Safety flag • Users manual
Elite Tuno Power Fluid Pack
$359.99
Power fluid resistance unit - Oversize elastogel roller reduces noice by 50% and tire wear by 20%, improves tire grip. - Fast fixing blocking mechanism. - "AutomaticTension Plate”: a system that maintains the correct pressure between the unit, roller and tire throughout training sessions. - Fits from 24- to 29-inch wheels. - Compatible with app My E-training = unlimited level mode and 12 months free subscription. - Pack includes: training mat and travel block.
Adams Original Folder Compact Trail-A-Bike
$358.49
The Folder Compact offers all of the safety and durability of the Folder One in a slightly smaller package. The patented easy-store folding frame fits into your trunk for easy transport and accommodates kids with up to 2" shorter inseams than the Folder One. Like all Trail-A-Bikes, the Compact is backed by a lifetime warranty so your family can ride with confidence. - Steel frame, designed for children aged 3-5 - Shorter reach and cranks, smaller chainring, and narrow handlebar - Simple single-speed is easy to pedal and ride - Patented, folding frame for easy storage and transport - Compatible with most 26" and 700c lead bicycles - Low center of gravity offers increased stability to parents and children - Best-in-class steel hitch + 4 adapters will fit almost any seatpost - Full chainguard and bashguard for enhanced durability - Includes safety flag for maximum visibility on the road
Adams Original Folder One Trail-A-Bike
$239.99 - $358.49
More than 25 years since its debut in 1986, the Folder One is the original that continues to set the bar for the hitch bike category. Featuring the patented Adams hitch that is often imitated but never duplicated, the Folder One offers unmatched safety and durability for years of enjoyment. Backed by a lifetime warranty, the Folder One is the best way to introduce 4-6 year-olds to the joys of cycling. - Steel frame, designed for children aged 4-6 - Simple single-speed is easy to pedal and ride - Patented, folding frame for easy storage and transport - Compatible with most 26" and 700c lead bicycles - Low center of gravity offers increased stability to parents and children - Best-in-class steel hitch + 4 adapters will fit almost any seatpost - Full chainguard and bashguard for enhanced durability - Includes safety flag for maximum visibility on the road
Park Tool Event Stand
$355.95
Park Tool's Event Stand is a versatile, stable, multi-purpose storage rack built to hold up to twelve bikes by the nose of the saddle. Perfect for events, races, or sidewalk storage, the ES-1 disassembles and folds easily for compact storage. It includes two height-adjustable tripod uprights, two 47” (119cm) support tubes, and one connector sleeve. The ES-1 is approximately eight feet long but can be extended in length with the use of ES-2 Event Stand Add on Kits (sold separately). • The ES-1 adjusts from 94 to 120cm (37"-47") • Horizontal width (inside to inside): 2.23 meters (87")
Surly Dummy Hitch
$350.00
Some of you people just can't get enough hauling done with your Big Dummy or your Surly trailer. Well, nutball cargo haulers, here is your solution: The Big Dumb Trailer Hitch. This handy piece replaces the wheel yoke of your Surly Bill or Ted trailer and inserts into the horizontal tubes on the non-drive side of your Surly Big Dummy cargo bike, thereby making it possible to haul your trailer using your cargo bike. Wow. I'm not really sure what to say here. Good for you, I guess? I hope your hemorrhoid surgery goes really well. Note: Big Dummy Hitch is not compatible with the Big Fat Dummy
Burley Bee
$349.99
The Bee enables family bike adventures on a budget without sacrificing safety and durability. This lightweight, bike-only trailer features comfortable seating for one or two children, tinted windows and plenty of space for cargo. Share your love for the outdoors with your little ones in the Burley Bee. - Compact fold flattens the trailer for easy storage and transportation - 20” push button wheels for quick removal - Tinted side windows
Burley Kazoo Trailercycle
$349.99
With Burley's Kazoo, you can turn your bicycle into a parent/child tandem and share the fun of riding with your child! Attach the included Burley Moose Rack to your bike and the Kazoo quickly and easily installs to it via a secure, ball-bearing hitch system that always pulls smooth and straight because it remains perpendicular to the ground. And, for easy pedaling and complete comfort, the Piccolo boasts a light aluminum frame, a front splash guard, a 20-inch aluminum wheel and an adjustable handlebar, seatpost, and seat.
Garmin Edge 820
$349.99
Whether your goal is to beat yesterday with a faster or longer ride or dial in your training for a race, Garmin's Edge 820 puts the features you crave at your fingertips. This compact, touchscreen GPS cycling computer offers advanced performance monitoring, bike-specific turn-by-turn navigation, the new GroupTrack feature and more. - Lightweight and compact with 2.3-inch high-resolution, capacitive touch display that works with gloves and when wet - GroupTrack feature keeps tabs on everyone in your riding pack - Advanced performance monitoring includes VO2 max, recovery advisor, Strava live segments, FTP, performance condition and advanced cycling dynamics - Built-in incident detection included; compatible with cycling awareness accessories such as Varia Vision, Varia smart bike lights and rearview radar - Bike-specific navigation preloaded with Garmin Cycle Map for turn-by-turn navigation
NiteRider Pro 2200 Race
$349.99
The Pro 2200 boasts one of the category's best power-to-weight ratios. With 2200 lumens of light output, using 3 CREE LEDs- set into a NiteRider custom reflector, guarantees to set the darkest bike trail ablaze. It features an accurate eight-step fuel gauge, keeping the rider informed of battery levels at all times. These attributes make the Pro 2200 the "go to" light among the world's top athletes and enthusiasts alike. - Compact and lightweight, perfect for race inspired riders - Custom 3 cone reflector producing brilliant trail illumination - 3 – class leading CREE LEDs at 6000k - Rugged design with Dupont Fiberglass reinforced nylon housings - Handlebar mount fits up to 35mm diameter bars - Helmet mountable - Lightweight 4 cell Li-Ion battery - Easily check battery power levels with the 8 step fuel gauge - FL 1 Standard IP64, dust and water-resistant - Convenient nylon storage pouch WARRANTY The Pro 2200 Race is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Headlamp - Li-Ion Battery - Helmet Mount - Handlebar Mount – Fits up to 35mm - 36" Extension Cable - AC Adapter - Nylon Storage Pouch
Saris Fluid2 Smart Equipped
$349.99
A Killer Training Combo What happens when you pair a speed sensor with the #1 selling bike trainer in the USA? You get a combo that’s ready for any virtual—or non-virtual—training ride. It’s the ideal setup for budget-conscious athletes looking to join fun, virtual communities, like Rouvy and Zwift, without a traditional smart trainer. Simply install the magnetless speed sensor on the rear wheel of your bike, mount your bike to the solid Fluid2 trainer with our innovative club knob, connect to your virtual training app of choice via Bluetooth or ANT+, and voilà! - you’re ready to sweat. Product Features - Fluid resistance unit provides a quiet and consistent ride. - Progressive resistance offers the widest resistance range and road-like feel. - Included speed sensor connects you with Rouvy, Zwift and other indoor cycling apps. - ANT+ USB and BlueGiga USB sold separately. - Includes one month subscription to Rouvy virtual training app In the box: - Fluid² Smart Equipped Bike Trainer - Dual-band magnetless speed sensor - Fluid² is the best-selling trainer in the USA. - Fluid resistance unit creates optimal road-like feel. - Fluid resistance unit provides a quiet and consistent ride. - Noise level at 20 mph is super quiet 64-68 decibels. - Large, individually precision-balanced flywheel allows for improved road-like feel. - Self-cooling mechanisms including a patented fan design keeps the unit performing better, longer. - Eccentric leveling feet allow for easy adjustment on uneven surfaces. - Comes on the foldable Classic frame with spring loaded, bolt-action lever. - Precision-machined alloy roller reduces tire wear and slippage. - Features clutch knob for perfect roller-to-tire tension each ride. - 2" resistance unit roller allows for 650b, 700c, 26", 27" and 29" wheel sizes – up to a 2.0 tire. - This trainer is designed to fit common road and mountain bike frames with included steel quick release skewer and has three settings for rear dropout spacing: 120mm, 130mm and 135mm. - Trainer tire recommended. - Compatible with indoor cycling apps. - Trainer is tested to the combined weight (rider and bike) of 300 lbs. - Optional thru-axle adapter available for 142x12mm and 148x12mm bikes. - ANT+ USB and BlueGiga USB sold separately. - Formerly branded as CycleOps Fluid² Smart Equipped
Sunlite Trailer Tot (Two Children)
$345.99
Hitch Sunlite's Trailer Tot to your bike and take your children to the local park, the pool, and the library. Its protective steel frame is covered with 600D polyester and comfortably fits two children. If the weather turns sour, you can drop the front of the canopy so your little ones stays dry. The trailer easily connects to your bike's axle and its quick-release 20-inch aluminum wheels roll smoothly along the pavement behind you. Clear canopy windows offer great views so your precious cargo enjoys every moment of their bike adventure.
Park Tool Hub Bearing Press Set
$344.95
- The HBP-1 is designed to quickly and accurately press bearings into a wide variety of cartridge bearing-type bicycle hubs. - Quick release design for fast tool installation and removal - Includes two bearing presses and precision machined aluminum pilots, bushings, and spacers - Works with more than 20 different cartridge bearing sizes and multiple axle configurations
Park Tool Pressfit 30 Shell Reamer And Pilot Set
$342.98
The 791 Reamer Set reamer is used on the PF30 frame shells. The reamer is sized at 45.94mm. The 791 Reamer Set must used with the HTR-1 Head Tube Reamer and Facer, a 750.2 Centering Cone and the 690-XL Facer. The 791 set also includes a pilot that allows a facing-only option of the PF30 frame shell.
Park Tool Team Issue Repair Stand
$339.95
Updated with a smoother, more solid rotation system! Originally designed for professional Pro Tour mechanics. The PRS-22.2 firmly holds any bike without clamping the frame or seat post by supporting the bottom bracket then locking either the front or rear dropouts. Works with any style axle system, including quick release and all sizes of thru-axles without cumbersome adaptors. Ideal for cleaning and general repair work, the PRS-22.2 features a solid tripod base and folds compactly for storage or transport. - Precisely constructed of anodized 6063 T6 lightweight aluminum and durable composites (12.5lbs, 5.67kg) - Adjustable BB height of 30" to 45" / 76cm to 114cm - 360 degree horizontal rotation allows easy access to all sides of the bike - Customizable bottom bracket supports accommodate a wide variety of BB shells - Main beam is adjustable fore and aft to customize balance points - Adjustable collar features receivers for optional accessories (sold separately) 106 Work Tray and PHT-1 Paper Towel Holder - Easily transported in the BAG-20 (sold separately)
Park Tool Deluxe Home Mechanic Repair Stand w/105-C Clamp
$335.95
Park Tool's Deluxe Home Mechanic Repair Stand is a heavy-duty folding stand with your choice of shop quality clamps. Perfect for heavier duty home use or portable shop use, the PCS-4 features a rock-solid, four-point leg system that folds together for storage, steel powder-coated tubing, and a composite horizontal tube. • PCS-4-1 uses the 100-5C Adjustable Linkage Clamp. • Clamp rotates 360º and is adjustable in height up to 67” (170cm) • Adjusts quickly from 55" to 72" • Approximate weight 26 lbs (11.8 kg) NOTE: The maximum weight holding capacity of the PCS-4 is 45 kg (100 lb.). However, this assumes the weight is centered over the legs.
Surly Kid Corral
$335.00
The Surly Kid Corral is just that: A Corral where you can store your kids when they’re riding on the deck of your Big Easy, Big Dummy, or Big Fat Dummy. Designed to be semi-modular, the corral offers up different configurations to fit your unique human-corralling needs. As your family grows in size or number, you can adjust the Kid Corral to give your tiny humans more or less freedom. The Kid Corral Kit comes equipped with a full safety rail system, two soft Deck Pads, and a Deck Bar comfortable enough for tiny paws. As an added bonus, the Kid Corral system is tested and compatible with the Thule Yepp Maxi child seat, for riders of smaller proportions. - Semi-modular system is designed to easily add or remove sections of the corral rails to fit your passenger safety needs - Kit includes the full safety rail system, two soft Deck Pads, Deck Bar and required mounting hardware - The Kid Corral system is also compatible with the Thule Yepp Maxi child seat, for riders of smaller proportions
SRAM RED eTap BlipBox
$330.00
SRAM's BlipBox is the control module that turns your triathlon or time trial machine into a wireless missile. Connected to SRAM RED eTap Blip remote shifters, the BlipBox manages the wireless shifting via AIREA, SRAM’s proprietary communication protocol, allowing immediate shifts from nearly any aero position. - BlipBox mount included - Replaces standard drop bar shift levers - Limitless aero configurations - Up to two positions per side - Fits a standard Garmin mount or the included mount
Saris TD1 Trainer Desk
$329.99
Trainer Mission Control Every training room needs a control center, and the TD1 is more than equipped for the job. Featuring built-in power strip with 2 AC and 2 USB outlets, this indoor trainer desk was designed to keep everything you need charged, organized and close at hand. Its roomy 12" x 20" table top is made from laminated birch for easy clean up, and is supported by stainless, corrosion-resistant steel sourced from America’s heartland. And as part of the Saris trainer eco-system, the TD1 is a perfect complement to the MP1 trainer platform. After just one ride with a dedicated trainer desk, you’ll ask yourself how you ever rode indoors without one. - Stay Charged: built-in power strip keeps training necessities nearby and powered up. - Pick Your Height: adjustable for wide range of bikes and training configurations. - Easy Cleaning: laminated birch wood top makes for easy clean-up post-ride. - Steamlined Look: built-in cable management and stainless steel hardware are both functional and eye-pleasing. - Enhanced Experience: a great addition to indoor training. Specs - Base: 13-inches wide x 36-inches Depth - Desk Top: : 12-inches Width x 20-inches Depth - Adjustable Desk Height from Floor: 40- to 55-inches - Materials: Laminated birch table top supported by a steel frame, featuring stainless steel and corrosion-resistant hardware - Cord Length: 6- foot AC cord - Built-in power strip with 2 AC and 2 USB outlets - Built-in cord retention clips for easy cable management and a clean look.
Thule Cadence
$329.95
Whether your day includes a quick trip downtown or a longer bicycle-based adventure, Thule's Cadence is a great way to amp up your family's taste for the open road. Boasting Thule's super-stable ezHitch bicycle attachment for confidence and ease of use, the Cadence comfortably seats two children in padded seats with five-point harnesses. You also get extra storage space for accessories, as well as a visibility-increasing safety flag. When your trip is over, the Coaster folds down quickly and easily for transport and storage.
Quarq ShockWiz
$329.00
ShockWiz is a suspension tuning system for air-sprung mountain bikes that combines high-tech hardware with an intuitive smartphone app. It's lightweight, durable and powered by a long-lasting coin cell battery, ShockWiz automatically records and evaluates suspension performance every time you ride. The ShockWiz app displays straightforward adjustments that unite bike, terrain and riding style. ShockWiz works for all mountain bike riders, regardless of their experience or bike's intended use. It works on hardtail and dual suspension bikes, and for all levels of skill, speed, and terrain. With ShockWiz, you know exactly how your suspension is performing – and how to make it better. Features & Benefits: - Automated tuning recommendations - Shock tuning score - a snapshot of how well your suspension is set up for you - Works on hardtail and dual suspension bikes. Works for Cross-Country, Trail, All Mountain and Downhill. - Inexpensive, replaceable CR2032 battery lasts for months - Waterproof and dustproof - IP67 rating - Two alternative hoses (included) offer a range of fitting options - Smartphone app is compatible with Apple and Android phones Essential Details: - ShockWiz is designed for all mountain bike riders, regardless of your experience or bike's intended use. - You can tune for every riding style: Efficient (pedaling), Balanced, Playful or Aggressive. - Advice for air pressure, spring rate, compression and rebound is displayed in the intuitive smartphone app. - In the box: ShockWiz hardware, two hoses, rubber mounting boot and zip ties.
Park Tool Reamer & Spacer Set for BB30 Bottom Bracket Shells
$327.88
Park Tool's 752 Reamer and Spacer Set allows reaming of bottom bracket frame shells in the BB30 standard. The reamer is sized at 41.94mm. It is used with the HTR-1 Head Tube Reamer and Facer and a 750.2 Centering Cone (each sold separately). The set includes a spacer to stop the reaming depth.
Park Tool Repair Stand Base
$325.95
Park Tool's Repair Stand Base is a steel base plate for the PRS-2 OSLB, PRS-2 OS-1, PRS-2 OS-2 Repair Stands (each sold separately). • 23" x 35" x 7/16" steel plate • Approximately 118 lbs • Black painted
Wheels Manufacturing Inc. Sealed Bearing Press
$325.00
- Installs 16 bearing sizes including 3 different bottom bracket bearings: 2437, 6000, 6001, 6002, 6003, 6801, 6802, 6803, 6804, 6805, 6806, 6900, 6901, 6902, 6903, 6904 - Includes T-handles with Acme threaded rods, wood base with dowels for holding adapters, 16 bearing installation drifts, 3 "speed spacers" and 2 linkage offsets for full suspension bearing installation - Made in the USA
Park Tool Team Issue Portable Repair Stand
$323.95
Tough, light, and loaded with features, that's Park's Team Issue Repair Stand. The 3-point leg system and adjustable height (up to 60 inches) creates a stable, ergonomic repair station for easy, efficient wrenching. And, Park's Professional Micro Adjust Clamp quickly clamps nearly any frame tube from 7/8 to 3 inches in diameter, including aero tubes. And the clamping force is fully adjustable for safety. Plus, the clamp has soft, durable rubber jaws that are narrow to fit on even short seatposts and tight areas on a bike. And, the clamp rotates 360 degrees for easy access to any part of the bike. Also, if you're in a hurry, there's a seat cradle for simply hanging your bike too. This great stand folds fast and small for easy transport and storage.
Park Tool AK-4 Advanced Mechanic Tool Kit
$318.95
Park Tool put together this set of over 40 of their best tools to do basic maintenance and cleaning tasks as well as perform a wide variety of repairs and adjustments on just about any bicycle. A perfect way to start or add to your collection of shop quality bicycle tools. The AK-4 includes a tough toolbox to protect your investment. Kit Includes: - ATD-1.2 Adjustable Torque Driver - BO-2 Bottle Opener - CC-4 Chain Checker - CM-5.2 Cyclone Chain Scrubber - CN-10 Professional Cable and Housing Cutter - CNW-2 Chainring Nut Wrench - CT-3.3 Chain Tool - DCW-1 Double-Ended Cone Wrench: 13/14mm - DCW-2 Double-Ended Cone Wrench: 15/16mm - DCW-3 Double-Ended Cone Wrench: 17/18mm - FR-5.2 Cassette Lockring Tool - GP-2 Pre-Glued Super Patch Kit - GSC-1 GearClean Brush - HXS-1.2 Professional L-Shaped Hex Wrench Set - MLP-1.2 Master Link Pliers - PAW-12 12" Adjustable Wrench - PW-5 Home Mechanic Pedal Wrench - RR-12 Tape Measure - SD-2 #2 Phillips Screwdriver - SD-3 3mm Flat Blade Screwdriver - SR-12.2 Sprocket Remover / Chain Whip: 5 to 12-Speed Compatible - SW-0 Precision Spoke Wrench: .127" - SW-2 Precision Spoke Wrench: .136" - TB-2 Emergency Tire Boots - TL-1.2 Tire Lever Set  - TWS-3 Torx Compatible 3-Way Wrench - VC-1 Valve Core Tool
Bryton Aero 60T
$309.95
Aero 60 is Bryton's first Aerodynamic GPS Cycling Computer for road bikes. With precisely engineered dimple design wrapped around its back and the brand new Aero Mount developed as an integrated system to reduce air drag, Aero 60 not only provides powerful features, but it's also built to be highly aerodynamic so you can ride fast just like the wind. Aero 60 also comes with pre-loaded OpenStreetMap and full GNSS support, allowing you to follow planned trips under precise positioning. Features: - Aerodynamic design - Pre-installed OSM Map for easier guidance. - Supports electronic shifting systems of Di2 (Shimano), eTap (SRAM) and EPS (Campagnolo) - Workout planning via Bryton app - Supports TrainingPeaks workouts. - 2.3" b/w Large Display - Full GNSS Support GPS+Glonass+BDS+Galileo+QZSS - STRAVA and TrainingPeaks Auto Sync - Supports GoldenCheetah (PC software) Specs: - Display: 2.3 inches Mono LCD - Battery Hour: 32 Hours - GPS: High-Sensitivity Chipset - Waterproof: IPX7 - Alerts: Yes - Lap history: 130 laps - Log history: 300 hours - Heart rate zones: 7 zones - Operating Temperature: -10C° ~ 50C° - ANT+/BLE Sensor Support In The Box: - Aero 60 - Aero Mount - Smart Speed Sensor (ANT+/BLE) - Smart Cadence Senor (ANT+/BLE) - Smart Heart-Rate Monitor (ANT+/BLE) - USB Cable - Safety Lanyard - Quick-Start Guide
Park Tool Left-Hand Bottom Bracket Tap
$305.88
Park Tool's 692 Left-Hand Bottom Bracket Tap is a 1.370" x 24 TPI replacement tap for the BTS-1 Bottom Bracket Tap Set. This tap is used on the drive side (right side) of the bike. This side of the bottom bracket uses a counter-clockwise or left-hand thread. Note: It is very important to have sharp and accurate cutting tools for effective tapping and thread-chasing. Using an excessively worn or damaged tap can cause permanent damage to the frame and/or bottom bracket.
Park Tool Right Hand Bottom Bracket Tap
$305.32
Park Tool's Right Hand Bottom Bracket Tap is a replacement tap for their BTS-1 Bottom Bracket Tap Set (sold separately). This tap is used on the non-drive or left side of the bike, which uses a clockwise or "right hand threading." Two taps are required for use.
Surly Trailer Hitch/Yolk Assembly (trailer sold separately)
$300.00
Surly's Trailer Hitch/Yolk Assembly is the correct hitch for Surly's Bill and Ted Trailers (sold separately). This fine chromoly hitch securely and quickly attaches to your bike using the included proprietary quick-release skewer. Or, if you have a bolt-on rear wheel, you just bolt the hitch onto your rear axle. The hitch fits most bicycles whether they feature full suspension, disc brakes, rear racks and fenders, or you name it. And it works with bicycles with wheels as small as 20 inches and as large as 29 inches, while always keeping the trailer bed level with the ground. The hitch also adjusts to accommodate rear hub widths from 120 to 145mm and allows you to align the centerline of the trailer on the centerline of the bike for easy pulling. Maybe best, the hitch lets you remove the trailer quickly and easily when you don't need it. Plus, by putting hitches on all your favorite bikes you can easily move the trailer between bikes!
Burley Minnow
$299.99
The Burley Minnow is a single seat kids bike trailer. Upholding the Burley Standard for safety, the Minnow has: a full aluminum roll cage, 5-point harness system and passes rigorous Burley Standard durability testing. It has a comfortable hammock style seat, fold flat design, water-resistant cover, and large cargo area. The Minnow is a bike only trailer. If you are looking for a quality trailer with all the essentials the Minnow is for you. - Seating for one child - Compact fold flattens the trailer for easy storage and transportation - 20” push button wheels for quick removal - Spacious rear cargo area - Tinted side windows - Recessed helmet pocket for extra head room - Hammock style seat provides passive suspension for rider comfort
Burley Travoy
$299.99
The Travoy’s compact design effortlessly stores away and is ready for deployment on your everyday commute or the occasional neighborhood bikeshare ride. The Quick Hitch, extendable tow arm and thoughtfully designed features maximize the trailer’s utility and functionality. The Travoy is the perfect tool for nimbly hauling the day’s groceries, luggage, or gear by bike for any urban adventure. - Length: 43" - Width: 22" - Capacity: 60lbs
Saris Aluminum Roller
$299.99
Take on any race, club ride, or weekend adventure with confidence. When you add Saris rollers into your training routine, you'll increase your balance, control, and ability to ride a straight line — all of which translate to more efficiency, power, and technique on the road. And, because you have to pedal 100% of the time to balance your bike, you get an amazing workout, no matter your pace. - Improve balance, control, and ability to ride a straight line. - Aluminum roller drums run silently and smoothly. - Precision-lathed 3.25" aluminum roller drums won't distort in heat or sunlight. - Fold flat or stand on end for convenient storage. - Designed for both indoor and outdoor use - 16" wide wheel base fits just about any size of bike and allows plenty of room to move around. - Rubber foot pads ensure that the only thing moving on the rollers are the drums, providing a secure, sturdy ride. - Durable steel-frame construction - Adjustable belt for right and left dismount - Resistance Roller uses zero moving parts to deliver quiet magnetic resistance. - Maximum wheelbase 44.5" (axle to axle) - Minimum wheelbase 37.5" (axle to axle)
Saris Fluid Smart Equipped
$299.99
The easiest, most affordable way to access to virtual training communities such as Rouvy and Zwift is with a basic bike trainer and a speed sensor. Enter: the Fluid Smart Equipped. Our sturdy trainer frame features a reliable and quiet fluid resistance unit and comes with a speed sensor that can be used for any virtual – or non-virtual – training ride. Simply install the magnetless speed sensor on the rear wheel of your bike, mount your bike to the Fluid bike trainer, connect to your virtual training application of choice via Bluetooth or ANT+, and ta da! – you’re ready to ride. In the box: - Fluid Smart Equipped Bike Trainer - Dual-band magnetless speed sensor Details: - Fluid resistance unit provides a quiet and consistent ride. - Progressive resistance offers the widest resistance range and road-like feel. - Foldable bike trainer frame - Included speed sensor connects you with Rouvy, Zwift, and other virtual training apps. - ANT+ USB and BlueGiga USB sold separately. - Eccentric leveling feet allow for easy adjustment on uneven surfaces. - Adjust tire fit to resistance unit with a convenient turn knob. - Resistance unit roller allows for 700c, 26", 27", and 29" wheel sizes – up to a 2.0-inch tire. - This trainer is designed to fit common road and mountain bike frames with included steel quick release skewer and is compatible with rear dropout spacing: 120mm, 130mm, and 135mm - Trainer tire recommended - Compatible with virtual training apps - All of our trainers are tested to the combined weight (rider and bike) of 300 lbs. - Optional thru-axle adapter available for 142x12mm and 148x12mm bikes (sold separately) - Trainer skewer included - Noise level at 20 mph is 68-72 decibels.
Saris Fluid2 
$299.99
Better health. Faster splits. More me-time. Whatever your goals may be, the Fluid2 helps you get the most out of each indoor training ride. The large, precision-balanced flywheel (with patented fan design) lets you easily customize each ride simply by shifting gears, just as you would outside. This design also helps keep your Fluid2 working better – longer. And, thanks to our built-to-last manufacturing process, the Fluid2 can help you conquer one goal after the next. - Fluid resistance unit provides a quiet and consistent ride. - Progressive resistance offers the widest resistance range and road-like feel. - Best-selling trainer in the USA - Compatible with Zwift and other indoor cycling apps
Park Tool Blue Box Tool Case
$299.95
The BX-2.2 features updated pallet configuration and storage options to help you keep your tools secure and easily accessible. The expanded custom designed tool pallets, including dual-sided pallet wings, are all housed in a virtually indestructible composite travel case. Designed and built for the traveling mechanic who demands the best! - Custom designed tool-holding pallets with loops and pockets - Folding, dual-sided pallet wings - Front tool pallet that stores securely inside during transport - Dent-proof composite shell built around an aluminum frame - Key lock - Nominal dimensions: 19" x 14.85" x 8.5" (48.25 cm x 37.7 cm x 21.6 cm), 13.2 lbs. (6 kg)
Park Tool Professional Wheel Truing Stand
$299.95
Park's TS-2.2 Professional Truing Stand has been a staple in bike shops for decades because it's so reliable and easy to use. It accepts all common wheel diameters up to 29 inches with and without tires. It’s made of heavy chrome-plated steel with nylon bushings at pivot points and can be bench-mounted, vise-held or attached to Park's Tilting Base (sold separately). The best feature is that this stand automatically centers rims over the hubs, which saves time repairing and building wheels. Also, installing the wheel and positioning the caliper for truing is quick and easy thanks to the stand's separate knobs for each setting. This is an awesome truing stand that will last a lifetime.
Ritchey Break-Away Bike Travel Bag
$299.95
The Break-Away Bike Deluxe Travel Case was designed specifically for Ritchey Break-Away bikes. Travel easier and save money by packing your Break-Away bike in this durable and rugged bag. Includes pockets for smaller parts, copious amounts of frame padding, and durable wheels for easy portage. - Measures 8.5"W x 26.5"H x 31"L - Handle and wheels make for easy transport - Note: some airlines charge
Topeak Prepstand Pro
$299.95
A pro level workstand with a built-in digital weight scale. Stable tripod design folds down small for travel or use at the races. Additional clamp lever for tightening / releasing the clamp with ease. Clamp Head Non-marring rubber jaws 360° rotation Digital weight scale Clamp Height 122 cm to 183 cm (48” - 72”) Clamp Opening 1.9 cm to 4.5 cm (0.75” - 1.8”)
Mission Workshop The Rhake City Pack (22L+)
$296.00
The Rhake is built to hold everything you need for work, play, and the occasional overnight. Purpose built pockets designed for your laptop computer, iPad, phone, power chargers, keys, sunglasses, and water bottle. Additionally, the weatherproof 22-liter main compartment can grow or shrink as needed to hold gear and clothing. Like all Mission Workshop backpacks, The Rhake is built with two-layer weatherproof construction to keep your gear safe and dry. For added versatility and customization, the shoulder straps are equipped with two Arkiv rails for attaching small accessories, such as weatherproof cell phone pouches which can be found in the Add Accessory slider above. Available in special edition 500d MultiCam Black with mil-spec AustriAlpin Cobra buckles. Or choose standard issue high-tenacity HT500 in black, grey, or olive featuring US made Duraflex buckles. Hint: Upgrade your HT500 pack to Cobra buckles using the accessory slider above and choose: The Rhake 1” Cobra Set. Made by hand in small batches in the USA. Built to Endure Guaranteed Forever
Park Tool Deluxe Home Mechanic Repair Stand w/105-5D Clamp
$295.95
Park's Deluxe Home Mechanic Repair Stand is an awesome portable stand that's as useful while traveling as it is at home. This versatile stand features Park's shop-quality Micro-Adjust Clamp that handles round and aero seatposts and frames from 7/8-inch to 3-inches in diameter and clamps securely with its quick-release cam and handle that fine-tunes the tension. The clamp also has protective rubber jaws and built-in slots for cables. Plus its jaws are only 2.7 inches tall so they easily fit in narrow areas, like on seatposts that aren't raised much. The Deluxe Stand also boasts a stable base and the top telescopes for putting the bicycle right where you need it to get your work done efficiently. Plus, you can also rotate bicycles 360 degrees and the stand folds for easy carrying and storage.
Feedback Sports Pro-Elite Repair Stand w/Tote Bag
$289.99
The Pro Elite Bike Repair Stand is the premier portable and home service partner for the most demanding bike mechanics. Its lightweight, compact, and durable design delivers unmatched stability, adjustability and portability. The patented ratchet-action closure and speed release clamp is capable of managing any bike frame, up to 85lbs (39kg) and tube diameter up to 2.6? (6.6cm). Be the most popular rider at the trailhead or in your neighborhood with the Pro-Elite Bike Repair Stand. Add a Tool Tray, Wheel Truing Station and a Bottle Opener for the ultimate bike repair stand setup.
Park Tool Deluxe Bench Mount Repair Stand w/100-3C Clamp
$289.95
The PRS-4.2 is a professional quality bench mount repair stand designed and built to withstand the rigors of everyday shop use. Includes three mounting holes, making it possible to clamp as high as 16.25" (41cm) from the bench surface. - Shop quality 100-3C Clamp quickly adjusts to fit any frame tube up to 1-5/8" (41mm) - The clamp jaws are nominally 4 inches (10cm) wide - Clamping height can be raised from 6.5" to 16.25" (92cm to 41cm) above the bench surface - Clamp rotates 360 degrees - Heavy gauge steel tubing - Chrome plated for durability
Park Tool Deluxe Bench Mount Repair Stand w/100-3D Clamp
$287.95
The PRS-4.2 is a professional quality bench mount repair stand designed and built to withstand the rigors of everyday shop use. Includes three mounting holes, making it possible to clamp as high as 16.25" (41cm) from the bench surface. - The 100-3D Micro-Adjust clamp grips nearly any tube from 7/8" to 3" (23mm to 76mm), including aero tubes - The clamp jaws are nominally 2.75 inches (7cm) wide - Clamping height can be raised from 6.5" to 16.25" (16cm to 41cm) above the bench surface - Clamp rotates 360 degrees - Heavy gauge steel tubing - Chrome plated for durability
Garmin Edge 520 Plus
$279.99
Advanced GPS Bike Computer for Competing and Navigation - Features advanced navigation, including new rider alerts and the preloaded Garmin Cycle Map with turn-by-turn directions for on and off-road courses - Preloaded Strava Live Segments let you compete second by second with your previous best or another rider’s PR; see real-time results right on your screen - Stay connected with your compatible smartphone using LiveTrack and GroupTrack, smart notifications, rider-to-rider messaging and built-in incident detection - Monitors cycling-specific VO2 max and recovery time when used with power and heart rate - Tracks Functional Threshold Power (FTP) and cycling dynamics when used with Vector power meters - Battery life: up to 15 hours With Edge 520 Plus, you can train smarter and discover new routes. This cycling computer features advanced navigation and challenges built right in, not to mention a bright color screen, preloaded Strava Live Segments and the Garmin Cycle Map with turn-by-turn directions. Whether you’re exploring new routes or pushing your limits at race time, Edge 520 Plus has exactly what you need. General Specs: - Physical dimensions: 1.9" x 2.9" x 0.8" (49.0 x 73.0 x 21.0 mm) - Weight: 2.2 oz (62.5 g) - Water rating: IPX7 - Battery: rechargeable lithium-ion - Display size: 1.4” x 1.9” (35.0 x 47.0 mm); 2.3" diagonal - Display resolution: 200 x 265 pixels - Color display - Battery life: up to 15 hours - High-sensitivity receiver In The Box: Unit Only - Edge 520 Plus - Flush out-front mount - Standard mount - Tether - USB cable - Manuals.
Light & Motion Seca 2000 Race
$279.99
Seca 2000 builds on the world’s most popular trail light family in a cost-effective solution that is reliable, durable, and features a trail-optimized beam pattern that is unmatched in the market. Robust waterproof construction, custom optics, enhanced firmware, and GoPro mount compatibility further the Seca’s reputation. The 2000 Race comes standard with the lightweight 3-cell battery pack that is perfect for the after-work ride. Features - 2000 Lumen output certified to the FL-1 Standard - Premium illumination from a 4 LED array with industry leading CREE LEDs - Custom engineered reflector/optics diffuses flood LED to provide ultra-wide beam pattern and focuses spot LEDs to maximize forward visibility - Advanced electronics with custom firmware keeps lumen output from sudden drops - Additional ‘Race Mode’ feature enables riders to conveniently toggle between high and medium output - Illuminated power button with low-runtime indicator and enhanced tactile engagement specifically for gloves - Waterproof design provides all-weather reliability (submersible up to 1 meter with battery connected) - Multiple mounting options include helmet, handlebar, and GoPro interface Specifications - Lumens: 2000 (high), 1000 (medium), 500 (low), 500 (pulse) - Runtime: 90 min (high), 180 min (medium), 360 min (low), 720 min (pulse) - Beam Angle: 25° (spot) - Charge Time: 150 min
Bryton Rider 450T
$279.95
Reign over Peaks - Designed for mountain bike lovers, Rider 450 preloads OpenStreetMap with Full GNSS support, allowing you to find trails, locate yourself and know which way to go in a second. Bigger Display, Better View - Designed for your better viewing experience, Rider 450 is built with crisp black and white 2.3” large display, making reading data become easier than ever. It can fit up to 10 data per page for you to have better understanding of your real-time performance. Follow Track with OSM - With OpenStreetMap(OSM), Rider 450 provides a convenient and intuitive user experience for mountain bikers. You can find the trails, locate where you are and which direction you should go at a glance, making the rides smoother and more enjoyable. ESS Support - Rider 450 supports electronic gear-shifting systems including Shimano’s Di2, SRAM’s eTap and Campagnolo’s EPS. Gear information, such as gear ratio, gear combo and even battery life, are displayed immediately on the Rider 450, eliminating the need to manually check the crankset and cassette. ANT+/ BLE Sensors Support - Aiming for the most convenience, both ANT+ and BLE sensors work perfectly with Rider 450 after simple pairing. Absolute Precision - Bryton's first GPS cycling computer with GNSS full support incorporates GPS, Glonass (Russia), BDS (China), Galileo (Europe) and QZSS (Japan) satellite systems, providing a much more reliable satellite coverage in any situation especially when there are buildings/trees or even while mountain biking, along with faster start-up. Supports up to 78+ Functions - Rider 450 provides rich data for you to fully grasp the performance of your ride. It incorporates up to 78+ functions including Time, Speed, Distance, Calorie, Cadence, Altitude, Power, HR and Di2. 32 Hours of Battery Life - If you love going on adventures whole day, Rider 450 certainly meets your needs. It provides up to 32 hours of battery life and allows you to charge via power bank while recording. TrainingPeaks Workout - To make training easier than ever, Rider 450 now supports workout plans from TrainingPeaks. Workouts can be planned on TrainingPeaks® and exported to the Rider 450 via the Bryton Active App. Trainings can then be easily and conveniently started from the device to reach training goals. Smart Notifications - Never worry about missing important phone calls, emails or texts during rides again! Rider 450 provides notifications whenever phone calls, emails or text messages are received after simple BLE pairing with Android/iOS smart phones. Customizable Data Display via App Tailor your own data display with Bryton Active App! After pairing with Bryton Active App, you can customize your data fields/pages based on your training goals via BLE on your phone. It's super easy to use. Sync to Bryton Active App - Enjoy seamless over-the-air synchronization with all new Bryton Active App. Workout data can be automatically synced via BT from the device to the Bryton Active App, where progress and graphical analysis can be viewed, and rides can be shared to social media. It allows users to sync and plan workouts, downloads planned trips, modify device and grid settings, and calibrate altitude all without WLAN connection. The app will also check the firmware version and GNSS data of the device and notify users that updates are available, ensuring that the most up-to-date firmware is always installed. With simple setup, Bryton Active App’s STRAVA, TrainingPeaks and Selfloops Auto Sync also make it easier to share activities and compare with millions. STRAVA, TrainingPeaks and Selfloops: Auto Sync - Compete with worldwide riders through Rider 450 recorded data.Workout files are automatically saved in FIT format, which can then be uploaded to popular training sites. It is also super easy to sync activities from the Bryton Active App to Strava/TrainingPeaks/Selfloops by pairing accounts. What's even better is the Rider 450 supports professional training applications, such as GoldenCheetah, for detailed post-workout analysis. - ESS Support - ANT+/ BLE Sensors Support - 32 Hours of Battery Life Specifications: - Display: 2.3 inches Mono LCD - Battery Hour: 32 Hours - GPS: High-Sensitivity Chipset - Waterproof: IPX7 - Alerts: Yes - Lap history: 130 laps - Log history: 300 hours - Heart rate zones: 7 zones - Operating Temperature: -10C° ~ 50C° In the Box: - Rider 450 - Smart Speed Sensor - Smart Cadence Sensor - Smart Heart-Rate Monitor
Park Tool Powder Coated Professional Wheel Truing Stand
$279.95
Park Tool's Powder Coated Professional Wheel Truing Stand has all the same features of Park's world famous, chrome plated TS-2.2 truing stand in a more economical, powder-coated version. • Uprights accept wheels up to 29” with or without tire • Tall, accurate calipers accept rim widths up to 4” • Accepts hub widths up to 175mm • Powder-coated heavy gauge steel • Strong, comfortable knobs • Removable/replaceable composite caliper tips protect painted rims • Uprights move simultaneously to accommodate front and rear wheels • Spring-loaded calipers and caliper arm prevent binding • Smooth, accurate operation
Campagnolo BIG Corkscrew
$275.00
Designed by Tullio Campagnolo, the BIG Corkscrew is a signature of artisanship of the Campagnolo brand and a masterpiece of functionality. 100% made in Italy by Italian craftsmen. Telescopic, self-centering bell perfectly positions the screw in the center of the cork - Screws harken back to seventies era Super Record cranks - Packaged in a collector's box - Two levers pull the cork out easily and delicately ensuring the bottle is not shaken, distubing sediment in aged wines - Designed so the screw will never completely twist through the cork, preventing pieces of cork dropping into the wine - Bronze is finished in a "vintage" hand-produced look. Satin is a great match for modern interior decor thanks to its sheen typical of steel
Surly Dummy Bags
$275.00
Surly Dummy Bags are designed to work with the Big Dummy cargo bike and other cargo bikes using the Xtracycle Longtail Standard. They were designed to provide the functionality and reliability you expect from Surly products. All materials, from fabric to thread to hardware, were chosen specifically for their given applications — as light or as heavy as they need to be to survive the battle against the elements and daily wear and tear. The 840d nylon exterior provides abrasion-resistance, while the tarp liner keeps cargo dry. Dummy Bags feature a roll-up rain flap, an expandable cargo flap, and a water-resistant inner pocket with an optional divider. Surly also included little details like stainless steel drainage and cinch cord grommets, replaceable cinch cords, and replaceable wear patches at the disc caliper and derailleur contact points. Dummy Bags work best with Surly Dummy Rails and Dummy Deck. Each piece will work with older parts — your Dummy Bags will play well with Xtracycle rails, for example — but fit and use of all features will not be ideal.
Park Tool Cutting Facer
$209.88 - $271.32
Park Tool has long provided some of the best cutting and machining tools in the bicycle industry. Their 690 Cutting Facers reflect their commitment to maintaining this high level of quality. Please read below for use and compatibility information specific to each size cutter: - 45mm (690): The 690 cutting facer is used on the HTR-1, HTR-1B, BFS-1, and BTS-1 cutting and facing tools. The facer has an outside diameter of approximately 45mm. - 57mm (690XL): The 690-XL is a larger version of the 690 facer for the HTR-1 Head Tube Reamer and Facer. It has a nominal outside diameter of 57mm. It may be used in conjunction with the 788 reamer. It is also used with the 767 Pilot or the 768 Pilot to face only the large diameter headtubes used with, "low profile," ZS-type headsets. - 65mm (690-XXL): The 690-XXL faces large headtubes. It has a nominal outside diameter of 65mm. Use the 690-XXL facer with the 750.2 Centering Cone Adaptor and 789 Reamer or 790 Pilot when facing head tubes with internal diameters of 55.95–55.90mm.
Ortlieb Back-Roller Pro Plus
$270.00
If you sometimes have trouble deciding which extra T-shirts to take along, or whether you should take two pairs of shoes or three, you may want to switch to Ortlieb because the world's largest waterproof bike bags have plenty of space for everything you need. The Back-Roller Pro Plus is the XL version of the popular Back-Roller Plus touring bag. With a volume of 70 liters per pair, it offers almost twice as much stowage space. It's also the first Ortlieb Back-Roller with an additional front pocket. Although not waterproof, the pocket is unusually practical, offering 4 liters of space for water bottles, sunscreen, wet things, and other items. The durable Cordura fabric gives the bag a noble, woven-fabric look, and is also completely PVC-free. The proven roll closure keep the contents of the inner compartment clean and dry at all times. Thanks to the ingenious QL2.1 system with its self-closing hooks, you can conveniently mount your bags on almost any bike rack. - XL rear panniers (pair) with roll closure for extended touring with lots of equipment - Outer front pocket (2 x 4 L) folds flat, with reflective thread, ideal for damp clothing - Material: PU-laminated Cordura - Integrated inner pocket and shoulder strap - Easy to clean inside - Two strong 3M Scotchlite reflectors - QL2.1 mounting system for racks with tube diameter max. 16 mm - 20 mm hook available as accessory (e.g. for e-bikes) - Reduction inserts for tube diameters 8, 10 or 12 mm with anti-scratch-function protecting the rack from abrasions - Upper QL-hooks and lower hook adjustable without requiring any tools - Lower hook with anti-scratch function protecting the rack from abrasions - Symmetrical shape allows use on right or left side - Can be combined on the rack with Ortlieb Rack-Pack size 24L or 31L
Burley Flatbed
$269.99
With versatility like a pickup truck, but none of the gas, Burley's Flatbed trailer will change the way you approach errands. This 14-pound cargo trailer is made from light aluminum and can hold a full 100 pounds of whatever you need to haul around. The tough PCV Skin material stands up to 2x4s and furniture without adding weight. The foldable design and quick-release wheels make it easy to store when not in use, and it uses the same hitch as Burley's child trailers, making it simple to swap from trailer to trailer.