Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Bottles/Cages

$127.00
HSF / AERIA hydration system is designed to seamlessly integrate with the Aeria Ultimate Stem (Stem is required for installation) - combined with the Aeria Ultimate aerobar, this system provides a fully integrated front end “super bike” solution for any bike. This BTA system features the race proven “no splash” fill port, a straw magnet mount for streamlined aero over the top of the system, a bite valve for fluid control and a removable computer mount. - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 30oz (857ml) - Only Compatible With: Profile Design Aeria Ultimate Stem (70mm or 100mm - ONLY) - Weight: 420g
$115.00
The HSF/Aero HC 800+ has been designed to incorporate all the essential features required of an aerobar bottle system along with a couple of premium add-ons. The shape of the bottle has been designed to hide the cage from the wind with minimal frontal area. - Flexible hose with bite valve and magnetic retention - Removable Garmin mount - Rear can be unscrewed for easy cleaning - Fill port with lid for fast refill and to avoid splashing
$113.00
The FC System was designed with one thing in mind: to bring together the most compelling details into one all-inclusive hydration system. - Streamlined Storage: New Profile Design FC Hydration Systems were designed with one thing in mind to create a clean front-end solution that thoughtfully integrates hydration, nutrition and electronic needs. Integrated storage streamlines nutrition needs into rear airfoil compartment. - Forward Computer Mount: Computer mount positions perfectly at the front of the system for optimal viewing. - Sealed cartridge bearings - No-Splash Refill Port: Brand new patent-pending refill port shields splash back. - Dual Straw Positioning: Strategically flexible to fit your preferences. A simple turn of the dial positions straw on the right or left side of the bottle. - Convertible Straw: Swap straw with gap cap to place straw in the front or rear of bottle. Specs - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 25oz (739ml) - Width: 65mm-140mm (center to center) - Weight: 250z (397g)
$69.95 - $89.95
The Wolf Tooth Morse Cage has its name because of the dots and dashes on the mounting plate that provides for up to 32mm of vertical placement adjustment. This allows the rider to change bottle cage position based on restrictions of frame size, frame bags, or mount placement. - Hand-bent hollow tubing - Fits any bike frame that has two standard bottle cage mounts with 64mm spacing - Easily bent back into shape if damaged - Made by hand in Minnesota SPECIFICATIONS - Bottle Type: Standard - Material: Titanium - Color: Silver - Access Style: Top - Mount Type: Bolt-On - Weight: 33g
$88.00
Zipp's SL Speed Carbon Bottle Cage features an ultra-light (18g) design engineered for flexibility and strength. Optimized for both side and direct bottle entry the SL Speed cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle.
$85.00
Never lose a bottle again with these incredible unicorn titanium bottle cages. This lightweight design doesn't mark your bottles, allows easy access, and holds your bottles on the worst terrain. - Single Cage - Unicorn anodized finish - Seamless 3-2.5 titanium tubing - 30 g - 21mm fore/aft adjustment - Hand bent in Indianapolis - Easy in-and-out - Extremely secure design - Laser welded - Optimized for purist bottles In our quest to create the ultimate bottle cage, we found ourselves completely fascinated by the look, feel, and durability of tubular titanium construction. This combination of design characteristics produces a cage that has better retention on gravel and other harsh surfaces and has proven to be the superior design when mounted on the underside of the down tube, so common in adventure riding and touring. While classic in appearance, this material, and its manufacturing are as complex and high tech as it gets. Cleaning and care: Oils from your hands and fingers can change the anodized color. To revive color and/or clean the cages (and straws), use rubbing alcohol and a soft cloth. Do not use abrasive products, this will damage the anodized finish. ?Please note that anodized titanium is only as hard as the titanium itself, and is less hard than many types of sand or abrasives found in sand and soil, including aluminum oxide and garnet which are naturally occurring and are harder than steel. Titanium anodize continually exposed to abrasion by these sand materials will eventually scratch and begin to wear and will not be covered under warranty. Routine cleaning of the cages and cleaning of bottles is recommended to remove any embedded abrasive particles which can accelerate this wear.
$85.00
All the benefits of a highly secure titanium bottle cage with a black finish that won't wear away. Other secure cages don't allow easy access to bottles, scratch your bottles, etc, but not SICURO. Specifications • 30g • Midnight Blue Cerakote coating • Easy in-and-out • 3-2.5 titanium tubing • Hand bent in indianapolis • Laser welded • Extremely secure design Description In our quest to create the ultimate bottle cage, we found ourselves completely fascinated by the look, feel, and durability of tubular titanium construction. This combination of design characteristics produces a cage that has better retention on gravel and other harsh surfaces and has proven to be the superior design when mounted on the underside of the down tube, so common in adventure riding and touring. While classic in appearance, this material, and its manufacturing is as complex and high tech as it gets. Cerakote is the world's leading high performance ceramic coating for use in aerospace, military, and biomedical applications. At only 1 micron thick, Cerakote high performance ceramic coating increases abrasion resistance by more than 100 times while increasing corrosion resistance more than 1000 times over traditional metal finishes and paint coatings. Cerakote even improves fatigue resistance by eliminating the possibility of surface scratching or notching which can lead to stress cracking over time. Please note that while Cerakote is the hardest, most durable ceramic coating currently available, however, it is not magic and is roughly equivalent in hardness to the hardest sand particles including aluminum oxide and garnet. Cerakote continually exposed to abrasion by these sand materials will eventually scratch and begin to wear and will not be covered under warranty. Routine cleaning of the cages and cleaning of bottles is recommended to remove any embedded abrasive particles which can accelerate this wear. Disclaimer As with all paint processes, Cerakote is created in batches. One batch can be slightly darker or lighter than another. One batch may have a bit more gloss than the other. This is due to the way the paint is processed and a very slight variation in the mix can cause slight variations in color or gloss
$85.00
In our quest to create the ultimate bottle cage, we found ourselves completely fascinated by the look, feel, and durability of tubular titanium construction.  This combination of design characteristics produces a cage that has better retention on gravel and other harsh surfaces and has proven to be the superior design when mounted on the underside of the down tube, so common in adventure riding and touring.  While classic in appearance, this material, and its manufacturing is as complex and high tech as it gets.  Cerakote is the world's leading high performance ceramic coating for use in aerospace, military, and biomedical applications.  At only 1 micron thick, Cerakote high performance ceramic coating increases abrasion resistance by more than 100 times while increasing corrosion resistance more than 1000 times over traditional metal finishes and paint coatings.  Cerakote even improves fatigue resistance by eliminating the possibility of surface scratching or notching which can lead to stress cracking over time.  
$80.00
Never lose a bottle again with these incredible rainbow titanium bottle cages. This lightweight design doesn't mark your bottles, allows easy access, and holds your bottles on the worst terrain. In our quest to create the ultimate bottle cage, we found ourselves completely fascinated by the look, feel, and durability of tubular titanium construction. This combination of design characteristics produces a cage that has better retention on gravel and other harsh surfaces and has proven to be the superior design when mounted on the underside of the down tube, so common in adventure riding and touring. While classic in appearance, this material, and its manufacturing are as complex and high tech as it gets. Cleaning and care: Oils from your hands and fingers can change the anodized color. To revive color and/or clean the cages (and straws), use rubbing alcohol and a soft cloth. Do not use abrasive products, this will damage the anodized finish. Please note that anodized titanium is only as hard as the titanium itself, and is less hard than many types of sand or abrasives found in sand and soil, including aluminum oxide and garnet which are naturally occurring and are harder than steel. Titanium anodize continually exposed to abrasion by these sand materials will eventually scratch and begin to wear and will not be covered under warranty. Routine cleaning of the cages and cleaning of bottles is recommended to remove any embedded abrasive particles which can accelerate this wear. Specifications - Single Cage - Rainbow anodized finish - Seamless 3-2.5 titanium tubing - 30 g - 21mm fore/aft adjustment - Hand bent in Indianapolis - Easy in-and-out - Extremely secure design - Laser welded - Optimized for purist bottles
$79.99
Special design facilitates the insertion of the bottle and keeps it firmly in place until the next drink. - For bottles up to 74mm in diameter - Weight: 35g
$75.00
Cage: - Improved reinforced composite material - Redesigned cage bracket Tool: - Nylon reinforced composite storage box - Chromium-vanadium steel body - Clutch 12: 2, 2.5, 3, 4, 5, 6, and 8mm hex, T25, valve core tool, chain tool, 0 and 2 spoke wrenches
$75.00
Zipp's Vuka Alumina BTA Mount with QuickView is cleverly designed to sit between the arms for aerodynamic efficiency while riding. The 104-gram, rock-solid aluminum mounting frame includes a QuickView quarter-turn mount for all Garmin Edge series head units, and is compatible with Zipp's Vuka BTA Carbon Water Bottle Cage (each sold separately). Mounting hardware is laser etched with a precision alignment scale, allowing wide-range adjustability so you can focus on the road ahead.
$70.00
Carbon Water Bottle Cage - Ultra-lightweight construction that provides a secure hold in all conditions - Access Style: Top - Mount Type: Bolt-On
$70.00
Aerodynamic, refillable, on-the-go front mounted bottle strategically positions hydration between the rider's arms for a hidden, sleek, aerodynamic profile. The integrated computer mount efficiently positions electronics. - Flip cap for quick and easy refill and no splash - Aerodynamic shrouded straw mount - Aerodynamic, removable nose aids in the cleaning process - Bracket attaches to the aerobar extensions and offers width adjustment as well as length adjustment - Cage and computer mount are independently adjustable - Aero HC Bottle is also compatible with Basebar Bracket allowing for independent positioning of extensions - Construction: BPA-Free, Foodsafe HDPE Bottle, Injected Nylon/Glass Fiber bracket and computer mount - Width: 85mm-120mm (center to center) - Capacity: 24oz (710ml) - Weight: 248g (System), 138g (Bracket Only)
$70.00
Each SICURO Ti cage is hand-made in the USA at our Indianapolis, IN headquarters using custom manufacturing processes and a state-of-the-art laser welder, the first of its kind in the bicycle industry. Made from aerospace-grade titanium tubing, these cages feature unique slotted mounting eyelets that allow fore/aft adjustability on the bike. The second-generation Ti Bottle Cage has a base-plate change to add more flexibility to the positioning on the frame, allowing usage for smaller frames. In our quest to create the ultimate bottle cage, we found ourselves completely fascinated by the look, feel, and durability of tubular titanium construction. This combination of design characteristics produces a cage that has better retention on gravel and other harsh surfaces and has proven to be the superior design when mounted on the underside of the down tube, so common in adventure riding and touring. While classic in appearance, this material, and its manufacturing is as complex and high-tech as it gets. - Seamless 3-2.5 titanium tubing - Extended adjustment mounting: up to 21mm fore/aft - Weight: 30 grams - SILCA Shield Warranty included covering your cage for 25 years! - Please note: bolts are not included
$69.99
Special design facilitates the insertion of the bottle and keeps it firmly in place until the next drink. - For bottles up to 74mm in diameter - Weight: 35g
$69.95
- The Wolf Tooth Morse Cage is a lightweight and low profile way to reposition bottle cages. - Named for its dot-dash-dot-dash mounting pattern, the Morse Cage base plate offers four positions across 32mm of vertical adjustment, fully capturing one mounting bolt in every position to prevent movement. - Can be bent back into shape if damaged, and is available in both titanium and stainless steel
$66.00
Features - UD carbon fiber - Specifically designed for the performance rider - Super lightweight at just 14g
$66.00
-28 grams -3-2.5 Titanium tubing -Doesn't mark up your bottles -Made in the USA
$66.00
Thick Wall Hollow Tube Titanium: - Weight without Straps: 80 grams - Stamped titanium back plates - 4-bolt mount with slots for hose clamp attachment - Available with two King Cage branded 20" Voile Straps or without straps (straps weigh 60 grams - Includes four 1 inch O-rings to attach King Cage branded Voile Straps - Dimensions: 2 1/2” wide x 15” tall, and the shelf sticks out ~ 2 1/4” Mounting is the same as our Manything Thing Cage. Please watch the below video for instructions;
$66.00
Expand the hauling capabilities of you bicycle with this lightweight and heavy duty carrier. It's great for attaching gear of larger water bottles on your next adventure. - Titanium - 3-bolt mount - Includes straps (colors vary)
$66.00
The Bottle Lowering Cage is a problem-solver for small frames or where space is limited. Lowers bottle 1.1" to allow a lower mounting position to increase bottle clearance. - Lowers the bottle ~1.1 inch - Titanium
$66.00
- UD carbon fiber. - Super lightweight.
$65.00
An absolute masterpiece, this cage screams style. The Fly Cage Carbon’s clean lines and hand-painted edges really stand out. No cage outperforms the Fly Cage Carbon with LockTight wings, which hold bottles securely while keeping them accessible. - 100% 3k Carbon - LockTight Wings - Hand-painted - Road and MTB approved - High-end and durable
$64.95
Made from Toray Japan T700 and T300 carbon fiber using a unique carbon flat lay-up process, the Shuttle Cage XE is an incredibly strong, ultralight, and affordable 3K carbon fiber bottle cage. With two stainless steel bolts included, it's ready to mount and enjoy on your ride. - Fits standard water bottle - Two stainless steel bolts included - Material: Torayca Japan T700 and T300 advanced carbon fiber - Size: 14 x 8.6 x 7.4cm / 5.5" x 3.4" x 2.9" - Weight: 22g / 0.78oz
$63.00
Cage: - Improved reinforced composite material - Redesigned cage bracket Tool: - Nylon reinforced composite storage box - Chromium-vanadium steel body - Clutch 9: 2, 2.5, 3, 4, 5, 6, and 8mm hex; T25 and flat-head screwdriver
$60.00
The HSF Aerodrink 880 follows in the footsteps of the Aerodrink with updated features. This Front-end hydration system easily mounts between aerobars so you don't have to deviate from the aero position to stay hydrated. - Flexible hose with bite valve - Flip cap for refill port - Secure mounting bracket and easy to remove bottle - Straw can be mounted in either the front or rear - Shape design to improve airflow onto the frame - Bottle Construction: BPA-Free, Food safe HDPE Bottle - Bottle Capacity: 30oz (880ml) - Compatibility: Aerodrink BTA bracket - BTA Construction: Injected nylon/glass fiber construction - Extension Width Requirement: 65mm - 140mm (center - center) - Weight: 289g (System), 130g (Bracket Only)
$60.00
- Whisky Carbon Water Bottle Cage - Cage Material: Carbon - Mount Type: Bolt-On - Weight: 28 grams (C3), 25 grams (C2), 30 grams (C1)
$59.99
- Durable fiber reinforced Composite Matrix construction. - Optimized side-load design for easy access in compact frames. - Available in right-side configuration only. - Integrated storage container. - CO2 cartridge holder on both sides of the cage (CO2 cartridges sold separately) - CO2 inflator head - V Pro 17 multi-tool with tubeless reamer and tire plug kits
$59.95
Your water bottle is one of the most important pieces of equipment on your bike. Keep it stable with the carbon fiber Ritchey WCS Carbon Water Bottle Cage. This lightweight cage was designed by Tom Ritchey to perform on the roughest roads or the most gnarly mountain bike trails. - Carbon bottle cage shape designed by Tom Ritchey - Extra strong grip, perfect on the roughest or smoothest rides - Matte UD carbon with black or white logos - 32g
Page 1 of 9 Next page