Bottles/Cages

HSF / AERIA hydration system is designed to seamlessly integrate with the Aeria Ultimate Stem (Stem is required for installation) - combined with the Aeria Ultimate aerobar, this system provides a fully integrated front end “super bike” solution for any bike. This BTA system features the race proven “no splash” fill port, a straw magnet mount for streamlined aero over the top of the system, a bite valve for fluid control and a removable computer mount. - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 30oz (857ml) - Only Compatible With: Profile Design Aeria Ultimate Stem (70mm or 100mm - ONLY) - Weight: 420g

The HSF/Aero HC 800+ has been designed to incorporate all the essential features required of an aerobar bottle system along with a couple of premium add-ons. The shape of the bottle has been designed to hide the cage from the wind with minimal frontal area. - Flexible hose with bite valve and magnetic retention - Removable Garmin mount - Rear can be unscrewed for easy cleaning - Fill port with lid for fast refill and to avoid splashing

The FC System was designed with one thing in mind: to bring together the most compelling details into one all-inclusive hydration system. - Streamlined Storage: New Profile Design FC Hydration Systems were designed with one thing in mind to create a clean front-end solution that thoughtfully integrates hydration, nutrition and electronic needs. Integrated storage streamlines nutrition needs into rear airfoil compartment. - Forward Computer Mount: Computer mount positions perfectly at the front of the system for optimal viewing. - Sealed cartridge bearings - No-Splash Refill Port: Brand new patent-pending refill port shields splash back. - Dual Straw Positioning: Strategically flexible to fit your preferences. A simple turn of the dial positions straw on the right or left side of the bottle. - Convertible Straw: Swap straw with gap cap to place straw in the front or rear of bottle. Specs - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 25oz (739ml) - Width: 65mm-140mm (center to center) - Weight: 250z (397g)

The Wolf Tooth Morse Cage has its name because of the dots and dashes on the mounting plate that provides for up to 32mm of vertical placement adjustment. This allows the rider to change bottle cage position based on restrictions of frame size, frame bags, or mount placement. - Hand-bent hollow tubing - Fits any bike frame that has two standard bottle cage mounts with 64mm spacing - Easily bent back into shape if damaged - Made by hand in Minnesota SPECIFICATIONS - Bottle Type: Standard - Material: Titanium - Color: Silver - Access Style: Top - Mount Type: Bolt-On - Weight: 33g

Zipp's SL Speed Carbon Bottle Cage features an ultra-light (18g) design engineered for flexibility and strength. Optimized for both side and direct bottle entry the SL Speed cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle.

Designed and engineered specifically for the Vuka BTA mount, the Zipp Vuka Carbon BTA bottle cage is constructed completely from UD carbon fiber, for low weight and strength, as well as super secure bottle fitment. It's engineered to virtually eliminate bottle launch.

Never lose a bottle again with these incredible royal purple titanium bottle cages. This lightweight design doesn't mark your bottles, allows easy access, and holds your bottles on the worst terrain. Specifications - Single Cage - Bourbon anodized finish - Seamless 3-2.5 titanium tubing - 30 g/cage - 21mm fore/aft adjustment - Hand bent in Indianapolis - Easy in-and-out - Extremely secure design - Laser welded - Optimized for purist bottles In our quest to create the ultimate bottle cage, we found ourselves completely fascinated by the look, feel, and durability of tubular titanium construction. This combination of design characteristics produces a cage that has better retention on gravel and other harsh surfaces and has proven to be the superior design when mounted on the underside of the down tube, so common in adventure riding and touring. While classic in appearance, this material, and its manufacturing are as complex and high tech as it gets. Cleaning and care: Oils from your hands and fingers can change the anodized color. To revive color and/or clean the cages (and straws), use rubbing alcohol and a soft cloth. Do not use abrasive products, this will damage the anodized finish. Please note that anodized titanium is only as hard as the titanium itself, and is less hard than many types of sand or abrasives found in sand and soil, including aluminum oxide and garnet which are naturally occurring and are harder than steel. Titanium anodize continually exposed to abrasion by these sand materials will eventually scratch and begin to wear and will not be covered under warranty. Routine cleaning of the cages and cleaning of bottles is recommended to remove any embedded abrasive particles which can accelerate this wear.

Never lose a bottle again with these incredible royal purple titanium bottle cages. This lightweight design doesn't mark your bottles, allows easy access, and holds your bottles on the worst terrain. Specifications • Single Cage • Royal Purple anodized finish • Seamless 3-2.5 titanium tubing • 30 g/cage • 21mm fore/aft adjustment • Hand bent in Indianapolis • Easy in-and-out • Extremely secure design • Laser welded • Optimized for purist bottles Description In our quest to create the ultimate bottle cage, we found ourselves completely fascinated by the look, feel, and durability of tubular titanium construction. This combination of design characteristics produces a cage that has better retention on gravel and other harsh surfaces and has proven to be the superior design when mounted on the underside of the down tube, so common in adventure riding and touring. While classic in appearance, this material, and its manufacturing are as complex and high tech as it gets. Cleaning and care: Oils from your hands and fingers can change the anodized color. To revive color and/or clean the cages (and straws), use rubbing alcohol and a soft cloth. Do not use abrasive products, this will damage the anodized finish. ? Please note that anodized titanium is only as hard as the titanium itself, and is less hard than many types of sand or abrasives found in sand and soil, including aluminum oxide and garnet which are naturally occurring and are harder than steel. Titanium anodize continually exposed to abrasion by these sand materials will eventually scratch and begin to wear and will not be covered under warranty. Routine cleaning of the cages and cleaning of bottles is recommended to remove any embedded abrasive particles which can accelerate this wear.

Never lose a bottle again with these incredible unicorn titanium bottle cages. This lightweight design doesn't mark your bottles, allows easy access, and holds your bottles on the worst terrain. - Single Cage - Unicorn anodized finish - Seamless 3-2.5 titanium tubing - 30 g - 21mm fore/aft adjustment - Hand bent in Indianapolis - Easy in-and-out - Extremely secure design - Laser welded - Optimized for purist bottles In our quest to create the ultimate bottle cage, we found ourselves completely fascinated by the look, feel, and durability of tubular titanium construction. This combination of design characteristics produces a cage that has better retention on gravel and other harsh surfaces and has proven to be the superior design when mounted on the underside of the down tube, so common in adventure riding and touring. While classic in appearance, this material, and its manufacturing are as complex and high tech as it gets. Cleaning and care: Oils from your hands and fingers can change the anodized color. To revive color and/or clean the cages (and straws), use rubbing alcohol and a soft cloth. Do not use abrasive products, this will damage the anodized finish. ?Please note that anodized titanium is only as hard as the titanium itself, and is less hard than many types of sand or abrasives found in sand and soil, including aluminum oxide and garnet which are naturally occurring and are harder than steel. Titanium anodize continually exposed to abrasion by these sand materials will eventually scratch and begin to wear and will not be covered under warranty. Routine cleaning of the cages and cleaning of bottles is recommended to remove any embedded abrasive particles which can accelerate this wear.

All the benefits of a highly secure titanium bottle cage with a black finish that won't wear away. Other secure cages don't allow easy access to bottles, scratch your bottles, etc, but not SICURO. • 30g • Black Cerakote coating • Will not chip, break, or fade • Easy in-and-out • 3-2.5 titanium tubing • Hand bent in indianapolis • Laser welded • Extremely secure design

All the benefits of a highly secure titanium bottle cage with a black finish that won't wear away. Other secure cages don't allow easy access to bottles, scratch your bottles, etc, but not SICURO. Specifications • 30g • Midnight Blue Cerakote coating • Easy in-and-out • 3-2.5 titanium tubing • Hand bent in indianapolis • Laser welded • Extremely secure design Description In our quest to create the ultimate bottle cage, we found ourselves completely fascinated by the look, feel, and durability of tubular titanium construction. This combination of design characteristics produces a cage that has better retention on gravel and other harsh surfaces and has proven to be the superior design when mounted on the underside of the down tube, so common in adventure riding and touring. While classic in appearance, this material, and its manufacturing is as complex and high tech as it gets. Cerakote is the world's leading high performance ceramic coating for use in aerospace, military, and biomedical applications. At only 1 micron thick, Cerakote high performance ceramic coating increases abrasion resistance by more than 100 times while increasing corrosion resistance more than 1000 times over traditional metal finishes and paint coatings. Cerakote even improves fatigue resistance by eliminating the possibility of surface scratching or notching which can lead to stress cracking over time. Please note that while Cerakote is the hardest, most durable ceramic coating currently available, however, it is not magic and is roughly equivalent in hardness to the hardest sand particles including aluminum oxide and garnet. Cerakote continually exposed to abrasion by these sand materials will eventually scratch and begin to wear and will not be covered under warranty. Routine cleaning of the cages and cleaning of bottles is recommended to remove any embedded abrasive particles which can accelerate this wear. Disclaimer As with all paint processes, Cerakote is created in batches. One batch can be slightly darker or lighter than another. One batch may have a bit more gloss than the other. This is due to the way the paint is processed and a very slight variation in the mix can cause slight variations in color or gloss

In our quest to create the ultimate bottle cage, we found ourselves completely fascinated by the look, feel, and durability of tubular titanium construction.  This combination of design characteristics produces a cage that has better retention on gravel and other harsh surfaces and has proven to be the superior design when mounted on the underside of the down tube, so common in adventure riding and touring.  While classic in appearance, this material, and its manufacturing is as complex and high tech as it gets.  Cerakote is the world's leading high performance ceramic coating for use in aerospace, military, and biomedical applications.  At only 1 micron thick, Cerakote high performance ceramic coating increases abrasion resistance by more than 100 times while increasing corrosion resistance more than 1000 times over traditional metal finishes and paint coatings.  Cerakote even improves fatigue resistance by eliminating the possibility of surface scratching or notching which can lead to stress cracking over time.  

Never lose a bottle again with these incredible rainbow titanium bottle cages. This lightweight design doesn't mark your bottles, allows easy access, and holds your bottles on the worst terrain. In our quest to create the ultimate bottle cage, we found ourselves completely fascinated by the look, feel, and durability of tubular titanium construction. This combination of design characteristics produces a cage that has better retention on gravel and other harsh surfaces and has proven to be the superior design when mounted on the underside of the down tube, so common in adventure riding and touring. While classic in appearance, this material, and its manufacturing are as complex and high tech as it gets. Cleaning and care: Oils from your hands and fingers can change the anodized color. To revive color and/or clean the cages (and straws), use rubbing alcohol and a soft cloth. Do not use abrasive products, this will damage the anodized finish. Please note that anodized titanium is only as hard as the titanium itself, and is less hard than many types of sand or abrasives found in sand and soil, including aluminum oxide and garnet which are naturally occurring and are harder than steel. Titanium anodize continually exposed to abrasion by these sand materials will eventually scratch and begin to wear and will not be covered under warranty. Routine cleaning of the cages and cleaning of bottles is recommended to remove any embedded abrasive particles which can accelerate this wear. Specifications - Single Cage - Rainbow anodized finish - Seamless 3-2.5 titanium tubing - 30 g - 21mm fore/aft adjustment - Hand bent in Indianapolis - Easy in-and-out - Extremely secure design - Laser welded - Optimized for purist bottles

- New drink system uses conventional water bottle body - CFD-design head unit gives aerodynamic profile - Head unit with anti-splash, quick-fill port, and adjustable straw - Ergonomically positioned computer mount - Universal V-cage mounts on any extensions - 241g

- CFD refined integrated bottle with Bento box and computer mount - Articulated straw mount to allow precise angulation and unobtrusive fold-away - Forward computer mount with easy line-of-sight - Included Vision Drop Bottle System and Extension Mount - Metron TFE compatible with adaptor SIZES - 700ml FINISH - Matte black - Color graphics WEIGHT - 335 grams

Zipp's Vuka Alumina BTA Mount with QuickView is cleverly designed to sit between the arms for aerodynamic efficiency while riding. The 104-gram, rock-solid aluminum mounting frame includes a QuickView quarter-turn mount for all Garmin Edge series head units, and is compatible with Zipp's Vuka BTA Carbon Water Bottle Cage (each sold separately). Mounting hardware is laser etched with a precision alignment scale, allowing wide-range adjustability so you can focus on the road ahead.

Aerodynamic, refillable, on-the-go front mounted bottle strategically positions hydration between the rider's arms for a hidden, sleek, aerodynamic profile. The integrated computer mount efficiently positions electronics. - Flip cap for quick and easy refill and no splash - Aerodynamic shrouded straw mount - Aerodynamic, removable nose aids in the cleaning process - Bracket attaches to the aerobar extensions and offers width adjustment as well as length adjustment - Cage and computer mount are independently adjustable - Aero HC Bottle is also compatible with Basebar Bracket allowing for independent positioning of extensions - Construction: BPA-Free, Foodsafe HDPE Bottle, Injected Nylon/Glass Fiber bracket and computer mount - Width: 85mm-120mm (center to center) - Capacity: 24oz (710ml) - Weight: 248g (System), 138g (Bracket Only)

Each SICURO Ti cage is hand-made in the USA at our Indianapolis, IN headquarters using custom manufacturing processes and a state-of-the-art laser welder, the first of its kind in the bicycle industry. Made from aerospace-grade titanium tubing, these cages feature unique slotted mounting eyelets that allow fore/aft adjustability on the bike. The second-generation Ti Bottle Cage has a base-plate change to add more flexibility to the positioning on the frame, allowing usage for smaller frames. In our quest to create the ultimate bottle cage, we found ourselves completely fascinated by the look, feel, and durability of tubular titanium construction. This combination of design characteristics produces a cage that has better retention on gravel and other harsh surfaces and has proven to be the superior design when mounted on the underside of the down tube, so common in adventure riding and touring. While classic in appearance, this material, and its manufacturing is as complex and high-tech as it gets. - Seamless 3-2.5 titanium tubing - Extended adjustment mounting: up to 21mm fore/aft - Weight: 30 grams - SILCA Shield Warranty included covering your cage for 25 years! - Please note: bolts are not included

- The Wolf Tooth Morse Cage is a lightweight and low profile way to reposition bottle cages. - Named for its dot-dash-dot-dash mounting pattern, the Morse Cage base plate offers four positions across 32mm of vertical adjustment, fully capturing one mounting bolt in every position to prevent movement. - Can be bent back into shape if damaged, and is available in both titanium and stainless steel

-28 grams -3-2.5 Titanium tubing -Doesn't mark up your bottles -Made in the USA

Expand the hauling capabilities of you bicycle with this lightweight and heavy duty carrier. It's great for attaching gear of larger water bottles on your next adventure. - Titanium - 3-bolt mount - Includes straps (colors vary)

An absolute masterpiece, this cage screams style. The Fly Cage Carbon’s clean lines and hand-painted edges really stand out. No cage outperforms the Fly Cage Carbon with LockTight wings, which hold bottles securely while keeping them accessible. - 100% 3k Carbon - LockTight Wings - Hand-painted - Road and MTB approved - High-end and durable

- Durable fiber-reinforced Composite Matrix construction - Optimized side-load design for easy access in compact frames - Available in right-side configuration only - Integrated storage container - CO2 cartridge holder on both sides of the cage - Integrated storage container includes CO2 head, V Pro 17 multi-tool with tubeless reamer, and tire plug kits - Includes two 20g CO2 cartridges

Made from Toray Japan T700 and T300 carbon fiber using a unique carbon flat lay-up process, the Shuttle Cage XE is an incredibly strong, ultralight, and affordable 3K carbon fiber bottle cage. With two stainless steel bolts included, it's ready to mount and enjoy on your ride. - Fits standard water bottle - Two stainless steel bolts included - Material: Torayca Japan T700 and T300 advanced carbon fiber - Size: 14 x 8.6 x 7.4cm / 5.5" x 3.4" x 2.9" - Weight: 22g / 0.78oz

The HSF Aerodrink 880 follows in the footsteps of the Aerodrink with updated features. This Front-end hydration system easily mounts between aerobars so you don't have to deviate from the aero position to stay hydrated. - Flexible hose with bite valve - Flip cap for refill port - Secure mounting bracket and easy to remove bottle - Straw can be mounted in either the front or rear - Shape design to improve airflow onto the frame - Bottle Construction: BPA-Free, Food safe HDPE Bottle - Bottle Capacity: 30oz (880ml) - Compatibility: Aerodrink BTA bracket - BTA Construction: Injected nylon/glass fiber construction - Extension Width Requirement: 65mm - 140mm (center - center) - Weight: 289g (System), 130g (Bracket Only)

- Whisky Carbon Water Bottle Cage - Cage Material: Carbon - Mount Type: Bolt-On - Weight: 28 grams (C3), 25 grams (C2), 30 grams (C1)

- Durable fiber reinforced Composite Matrix construction. - Optimized side-load design for easy access in compact frames. - Available in right-side configuration only. - Integrated storage container. - CO2 cartridge holder on both sides of the cage (CO2 cartridges sold separately) - CO2 inflator head - V Pro 17 multi-tool with tubeless reamer and tire plug kits

Your water bottle is one of the most important pieces of equipment on your bike. Keep it stable with the carbon fiber Ritchey WCS Carbon Water Bottle Cage. This lightweight cage was designed by Tom Ritchey to perform on the roughest roads or the most gnarly mountain bike trails. - Carbon bottle cage shape designed by Tom Ritchey - Extra strong grip, perfect on the roughest or smoothest rides - Matte UD carbon with black or white logos - 32g

This rear-mounted hydration system holds two bottles and attaches directly in front of seatpost for easy hydration on the go. - Full angular adjustment allows bottles to be rotated - 6061-T6 aluminum construction - Brackets included to mount two Co2 cartridges - Fits 31.6mm to 27.2mm seatpost with shims (included) - Includes two cages and 6061-T6 Aluminum clamp and extension

PRISM Carbon is Elite's top-of-the-line bottle cage made of polymer-matrix composite reinforced with lightweight, yet super-strong carbon fiber. Light, ergonomic, and resistant, PRISM Carbon provides a unique combination of high performance, unique design, and easy-access storage for your bottles when space on the frame is limited. PRISM Carbon's distinctive feature is the structure designed to allow a practical side insertion of the bottle, compatible with all frames yet particularly suitable to fit MTBs, smaller bike frames, or sloping top tubes where cyclists need to optimize their hydration process due to the extreme trail conditions of off-road routes and rough terrains.

- New full carbon cage - More lightweight = 24.4g - Extra-secure design - Innovative carbon layup - Fully hardcore ride tested - 3 colors for style

The Morse Cargo Cage is designed to increase a bike’s carrying capacity. This was created for bikepacking, self-supported races, and rides that just require more gear. The Morse name extends the popular dot-dash mounting pattern that allows for 35mm of vertical adjustment, which is also featured on Wolf Tooth Morse Bottle Cages. It will fit on a fork three-pack mount or anywhere on the frame that has bottle bosses. The Morse Cargo Cage also has bolt mounting points on the angled sides for additional versatility. It is made here in Minnesota, USA from durable, corrosion-resistant 5052 aluminum. - Cage can be purchased with two 20" Wolf Tooth Cargo Straps; straps can also be purchased individually - Designed to fit standard 64mm bolt-spaced 3-pack mounts - Vertical positioning adjustment up to 35mm with Morse dot-dash mount pattern - Mount options in center of cage, as well as on right and left sides; use included spacers when mounting the cage by its side - Designed to fit fork bags, 32 oz. Nalgene bottles, large burritos, and more - Three stainless steel bolts and plastic spacers included - Replacement parts available

The Axis Ultimate Carbon Cage is light, strong, and subtle. - Lightweight - Superior bottle retention - Aerodynamic design - Weight: 20g

The No. 9 Side Entry Cage by Whisky Parts Co. melds convenience, form, function, and light weight. It's full-carbon design securely grips your bottle, and side entry cages allow access to your bottle on small frames or when using frame bags.

Planet Bike's Sideload Cage is perfect for smaller frames and unique full suspension designs. This carbon fiber cage loads from the right. And, it's only 22 grams!

An absolute masterpiece, this cage screams style. The Fly Cage Ano’s clean lines and laser etched design really stand out. No cage outperforms the Fly Cage Ano with its LockTight wing design, that holds bottles securely while keeping them accessible. - 100% anodized aluminum - LockTight Wings - Laser etched design - Road and MTB approved - High-end and durable

Vico is the first-choice carbon bottle cage used by the best World Tour teams. Feedback given by champions made it possible to design and manufacture this bottle cage, so it could meet all riders' needs. Many years of races and victories with the world's best professional teams have helped us design, test, and create a bottle cage that will meet the expectations of even the most demanding cyclists. - Injection bottle cage - Carbon fiber - Extremely light - Grips bottle firmly yet insertion/removal is very easy - Weight: 23g - Made in Italy

The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit has a water bottle cage as well as everything needed for common road-side fixes: an eight-piece multi-tool, three tire levers, CO2 inflator & cartridges. - Lightweight composite water-bottle cage - Three MSW tire levers - Eight-piece flat pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Windstream Push-On CO2 inflator head - Two 20g CO2 cartridges

The HSF BTA offers improved positioning versatility, better retention, and the ability to mount a Garmin computer above the bottle. The HSF BTA takes a minimalist approach to providing the maximum versatility for a between the arms bottle mount. The low weight, high retention, setback mount point, and integrated computer mount give everything you need and nothing you don't. The mount is offset so that the center point of the bottle bolts can sit well behind the attachment point. This allows the cage/bottle to be set further back on aerobars that would otherwise force the bottle forward to the point where it is inaccessible. The mount has a slightly dropped 'V' shape to help center it between the extensions and reduce the risk of the bottle interfering with narrow armrest positions. It also accommodates a greater range of extension widths than the previous models. - Construction: Injected nylon/glass fiber construction - Compatibility: HSF Bottle or use with Standard Cycling Water Bottle - Computer Compatibility: Garmin: Mount is optional and can be removed. (Wahoo: Adapters available via 3rd party purchase). - Mount offset: 30mm - Mount drop: 10mm - Extension Width Requirement: 80mm - 120mm (center - center) - Weight: 100g

The Aero HC Bracket Kit from Profile Design lets you attach a water bottle and computer mount in between your aero extensions. It fits aero extensions from 85mm to 120mm wide so you can use the bars of your choosing.

LiterCages hold a variety of 3.5" diameter bottles including those made by Nalgene and other top brands. The 7-slot mounting bracket allows attachment at multiple positions on frames and forks with two-bolt and three-bolt mounting configurations. Durable stainless steel construction provides a corrosion-resistant finish and secure hold. Choose from five finishes: Polished Stainless, Black, Orange, Mint, or Purple. - Stainless Steel Cage for Large Bottles - Made in USA Note: *Use of an additional strap is recommended for these oversized or metal bottles to eliminate any rattling. **We recommend using 3-hole mounting bosses when carrying these larger bottles.

Optimized for both side and direct bottle entry, Zipp's Alumina cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle. - 27 grams

Constructed entirely of extruded aluminum, this sleek bottle cage is CNC-machined and heat treated for a strong, lightweight design. Weighing in at only 39 grams, it maintains a tight grip via sturdy ribs and top catch which secure a wide range of bottle types and sizes. The cage design facilitates easy bottle retrieval and return and oval mounting holes allow for fine-tuning of the cage's position on most bike frames. SPECS: - WEIGHT: 39g

From the city to the trail, each piece of Timber to Town gear is thoughtfully designed to enrich a life lived by bike. Made in Japan from 5mm stainless steel tubing, the ZigZag Bottle Cage has a simple, elegant design that is both subtle and eye-catching. DETAILS: - 5mm stainless steel tubing - Simple, elegant design - Comes with stash bag for snacks, loose change, etc - Made in Japan - 80 grams (2.8 ounces)

When a young musician found hunger on his path, he looked to the ground beneath him to carry him onward Thus began a life-long quest for fungi and the mirror it shines on the rest of our worlds. That fascination spawned- and cast its spores through the vibrations we hear and the paths we follow. SimWorks is pleased to offer an exclusive offering of this thoughtful piece of cycling ornament. A graceful blend of utility and understated expression- and a humble reminder that both our forested and steel worlds are intrinsically connected Historically, SimWorks has created most of our products in collaboration with, or dependent on the expertise and manufacturing prowess of established domestic factories; but 'John Cage' is crafted in-house from the ground up. We are proud of the final product- in both it's clean but evocative lines and ease of use. A carefully selected gauge of stainless wire gives just-the-right flexibility, so it wraps the bottle properly and keeps it from jettisoning- even on spirited rides. A comfortable hold makes it easy to remove and replace the bottle. In addition, by spec'ing a full-length attachment plate with 4 mounting holes, the cage can be mounted in a high or low position- adding a thoughtful accommodation for frame packs and more compact main frame triangles Made in Japan SPECIFICATIONS - Material: Stainless Steel - Weight: 74g - Double mount system - high and low offset

- Stainless steel cage with a black vinyl coating - 5" Outer diameter cage velcros on any size frame tube or seat post - Will not scratch metal bottles or remove paint - Not recommended for glass - Proudly made in chicago, Illinois

- Lightweight and durable carbon composite construction - Standard loading configuration - Cage design provides secure bottle retention with easy in/out accessibility - Raw carbon composite finish with multiple color detail options - Includes hardware - 28g - Mount: Braze-on

The SKS Anywhere Adapter with VeloCage Bottle Cage allows you to mount a bottle cage anywhere on your frame. Remove the bottle cage, and almost anything can be placed anywhere on your bike frame. Perfect for bikes that do not have water bottle cage mounts. The double-sided hook-and-loop straps are super strong and long enough to go around almost any frame tubing—cut straps to desired length after placement. Designed to mount water bottle cages, mini pump mounts, and other standard items, the straps can also be used to strap on jackets, bananas, energy bars, trail tools, fishing poles, and more. Cage is included in case that is your main purpose for the adapter.

The easiest way to get at your bottle. The Quick Draw Bottle Pocket can be attached to our Hobgob Hip Pack allowing you to carry a water bottle. The structured shape allows for one handed access to your bottle whilst riding, and the elastic strap will secure your bidon over the rowdiest of trails. Two Blackhawk Speed Clips are provided for attaching the Bottle Pocket, which are woven through the webbing onto the wing of the Hip Pack. You can see detailed instructions Here. Made in-house, London, UK

The Dual cage combines recycled carbon fibers from the automotive industry and impact-resistance polyamide. The material, named POLYCARBON, has strong advantages: the high carbon content of the bottle cage makes it especially light, yet at the same time it guarantees a high degree of stability.

If drinking cold water is important to you, the CamelBak Podium Ice Insulated Water Bottle is right up your alley. The Podium Ice bottle is the perfect cold-storage water bottle for biking adventures. This water bottle has been engineered to keep your body properly hydrated while improving your on-road performance. It has been designed with Aerogel Insulation, which keeps water cold four times longer than other bicycle water bottles. Cycling enthusiasts have trusted CamelBak for years to provide them superior bottles for water that are optimized for peak performance. The Podium Ice sports water bottle continues to elevate CamelBak as the best of the best in the cycling world. This premium squeeze water bottle is a must-have item for your bike accessories kit. It has been redesigned to fit securely in a variety of bicycle bottle cages. The water bottles squeeze easily, allowing you to take in more water with less effort. They also include a high-flow, self-sealing cap, which maximizes flow rate while reducing spills and splashes. The Podium Ice bottle is 100% free of BPA, BPS, and BPF. This insulated water bottle also features Trutaste Polypropylene with HydroGuard materials so that you taste your water and nothing else, time after time. All parts are easy to separate, which makes cleaning a breeze. Our Got Your Bak Lifetime Guarantee covers all reservoirs, backpacks, bottles, and accessories from manufacturing defects in materials and workmanship for the lifetime of the product. The CamelBak Podium Bike Ice Insulated Squeeze Water Bottle measures 2.9 x 2.9 x 10.4 inches and weighs only 5.4 ounces. - Insulated CamelBak Water Bottle: The CamelBak Podium Ice Insulated Water Bottle is infused with Aerogel Insulation, which has been added to keep water cold four times longer than other squeeze water bottles. - High-Flow, Self-Sealing Cap: This CamelBak sports water bottle is engineered with a high-flow, self-sealing cap. This maximizes the flow rate while eliminating spills and splashes. - Easy to Clean & BPA-Free: The CamelBak Podium Ice is a premium insulated bottle for rapid, reliable, superior hydration. All parts can be separated for easier cleaning, while all plastic materials are 100% free of BPA, BPS, and BPF. - Optimized Cage Fit: The Podium Ice insulated water bottle for bikes is designed to fit securely in a variety of bottle cages. It's easy to squeeze, which ensures that you get more fluid intake with less effort. - If We Build It—We'll Bak It: Our Got Your Bak Lifetime Guarantee covers all reservoirs, backpacks, bottles, and accessories from manufacturing defects in materials and workmanship for the lifetime of the product.

- Lightweight construction of extruded, CNC-machined, and heat treated aluminum - Upper bottle catch ensured bottles stay in place - Designed without an integrated pump bracket - Oval holes allow for adjustable mounting on frames - Weight: 39g

Designed with a built-in, discreet holder for an Apple AirTag*, the Matrix Air Cage is a revamped take on our popular Matrix Team Cage. Featuring the same minimalist, dual-side-loading design, it goes one step further by cleanly hiding the AirTag between the bottle cage and bike frame for an added level of security. It's also constructed from the same lightweight, incredibly durable Composite Matrix material and goes one step further with its IPX7 waterproof rating keeping the AirTag dry. By developing it to be virtually indistinguishable from a standard water bottle cage, the Matrix Air Cage is a perfect solution to hide an AirTag and utilize Apple's "FindMy" app to help locate a stolen or missing bicycle. And it's been verified to work with Apple's ultra-wideband signal. Lastly, it comes with a set of stainless steel TR25 security bolts, complete with an included tool bit. -Includes TR25 security bolts and tool. -Ultra-wideband tested. *Apple AirTag not included. *AirTag is a trademark of Apple Inc., registered in the U.S. and other countries and regions.

The PDW Hot Take cup holder is adjustable to hold most any size of travel thermos. Its soft design will keep hot or cold liquids at arm's length, secure and rattle-free.

The Lucky Cat Cage is made from a single sheet of lightweight 5052 alloy. Cut in the shape of a Maneki-neko (Japanese for "beckoning cat"), this Portland Design Works bottle cage will undoubtedly bring good luck to its owner. Its side loading design makes it a great fit on small bike frames.

The shape of the white VGD Cage was inspired by the legendary brandy toting St. Bernard rescue dogs of the Swiss Alps. The black VGD was designed to represent another type of rescue dog: the everyday Black Lab mix who's waiting to steal your heart and be adopted at the local shelter. - PDW donates 10% of profits from the Very Good Dog (VGD) Cage to animal advocacy organizations that help very good dogs in need.

Ultra Lightweight One of the lightest bottle cages on the market - Only 14g! Features - Design: Perfect for touring, commuting or leisurely rides - Quick Assembly: Easily mounts to almost any bike - Durable carbon construction - Compatible with standard water bottles - Ultra lightweight - Only 14g!

- Copper finish matches premium leather saddles and MKS pedals - 4.5Mm aluminum rod with aluminum bolts - Made in japan

- Stainless steel cage with 24 ounce screw top bottle - Cage Velcros on any size frame tube or seat post

The Bottle Lowering Cage is a problem-solver for small frames or where space is limited. The mounting tabs are 28mm (1.1") offset to allow a lower mounting position to increase bottle clearance. - Stainless steel - Lowers the bottle ~1.1 inch