Packs/Racks/Baskets

The CAM UTILITY STRAP features our 1" Cam Buckle. Weighing in at 11.25 grams, this CNC machined aluminum buckle is lighter than most plastic side release buckles. Unlike plastic, it is crazy strong and doesn't get brittle in the cold, and we think it's easier on the eyes as well. Features: - Strap comes in 18, 36, and 48 inch lengths - 1" nylon webbing offers great abrasion resistance and strength Buckle Specs: - Designed for 1" webbing - 11.25 grams - Titanium pin for lightweight and high strength performance - Corrosion resistant stainless steel spring We offer 3 lengths of straps. Keep in mind you can always trim them down and melt the end to prevent fraying. You can also link two straps together for larger loads.

Fit Kit SET724.R contains all the parts to mount an Old Man Mountain rack to the rigid fork of a road or gravel bike with a 12 mm thru axle.. This kit includes: - 12 x 134 mm thru axle with M12 x 1.5 mm thread pitch - Spacers to reduce the length to 128 mm - A pair of mounting pucks, for bikes without upper eyelets. - Ultra strong and UV stable Panduit Zip Ties - Clear protective tape, for underneath the pucks and Zip Ties - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame If mounting on a Fox Gravel Fork, please also order 377-1240. We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

- 2 in 1: smartphone holder and top tube bag - Phone compartment is touch screen compatible and features a headphone cable port on the side - Waterproof material and zip, and additional rain cover - Anti-slip surface on lower part for better adhesion on the top tube - Universal Mount: includes an optional double strap for larger frames

- Created from a highly resistant fabric - Universal mounting using velcro for all types of pannier racks - Easy and quick tool-free assembly - Rain cover included - Material: Polyurethane 600D - Weight: 450g

- Created from a highly resistant fabric - Universal mounting using velcro for all types of pannier racks - Easy and quick tool-free assembly - Convenient storage for phone with velvet lined inners to protect the phone. - Large volume bag with one main extendable pocket - Rain cover included - Material: Polyester 840D - Weight: 710g

- Created from a highly resistant fabric - Universal mounting using velcro for all types of pannier racks - Large volume bag with side pockets that can be converted into bags - Reinforced side pockets made from EVA shells. - Rain cover included - Material: Polyester 840D - Weight:1kg

Replacement bracket and hardware for Origin8 Classique and Rush front cargo racks

The Jandd Reflector Mount allows riders to attach a reflector to a rack.

Universal shoulder strap for ORTLIEB bags. Includes D-rings, plastic shoulder pad and carabiners. For Bike-Packer and Sport-Packer models from 2009 and for all Back-Roller City, Sport-Roller City and Gravel-Pack models. DETAILS: - 1 shoulder strap with carabiners

For all models from 1999 Need to replace a defective buckle? DETAILS: - 1 plastic, side-release buckle

The all-new NANO Series, our smallest straps yet! 1/2" wide, this micro version of our time tested tiedown offers the same versatility in an even smaller package. Inspired by a few clever users’ modifications to our standard Voile Straps, the all-new Voile Straps Nano Series is designed with the minimalist in mind. They are available in three sizes, each of which will accommodate a load as narrow as a ballpoint pen. They feature the same weatherproof and UV-resistant material that you know and love. They are textured for extra grip, and are fitted with a nylon buckle. So when you need a tiny strap that will overdeliver, the Nano Series helps you keep it together. • Non-Marring • Non-Conductive • Won't Slip • Holds Tight • Super Strong • UV Resistant • Works in Extreme Weather • Daisy Chain Together SPECIFICATIONS - Load Circumference Min-Max: 1in — 7.4in / 2.5cm — 18.7cm - Material: UV-Resistant Polyurethane - Buckle: Super Tough Nylon

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

Bolt-on eyelet for use with Tubus Lowrider racks and bags requiring bungee hook attachment.

The all-new NANO Series, our smallest straps yet! 1/2" wide, this micro version of our time tested tiedown offers the same versatility in an even smaller package. Inspired by a few clever users’ modifications to our standard Voile Straps, the all-new Voile Straps Nano Series is designed with the minimalist in mind. They are available in three sizes, each of which will accommodate a load as narrow as a ballpoint pen. They feature the same weatherproof and UV-resistant material that you know and love. They are textured for extra grip, and are fitted with a nylon buckle. So when you need a tiny strap that will overdeliver, the Nano Series helps you keep it together. • Non-Marring • Non-Conductive • Won't Slip • Holds Tight • Super Strong • UV Resistant • Works in Extreme Weather • Daisy Chain Together SPECIFICATIONS - Load Circumference Min-Max: 1in — 10.4in / 2.5cm — 26.3 cm - Material: UV-Resistant Polyurethane - Buckle: Super Tough Nylon

Spruce-up a well-loved Dummy bag with replacement parts from Surly.

The all-new NANO Series, our smallest straps yet! 1/2" wide, this micro version of our time tested tiedown offers the same versatility in an even smaller package. Inspired by a few clever users’ modifications to our standard Voile Straps, the all-new Voile Straps Nano Series is designed with the minimalist in mind. They are available in three sizes, each of which will accommodate a load as narrow as a ballpoint pen. They feature the same weatherproof and UV-resistant material that you know and love. They are textured for extra grip, and are fitted with a nylon buckle. So when you need a tiny strap that will overdeliver, the Nano Series helps you keep it together. • Non-Marring • Non-Conductive • Won't Slip • Holds Tight • Super Strong • UV Resistant • Works in Extreme Weather • Daisy Chain Together SPECIFICATIONS - Load Circumference Min — Max: 1.25in — 14.3in / 3.2cm — 36.3cm - Material: UV-Resistant Polyurethane - Buckle: Super Tough Nylon

- 250mm seat stays for the Classic Disc Rack (PN 730387-01) - Sold as a pair

Compatible with Shiner and Shiner Back lights - Rubber pad with loop straps to quickly mount and remove light for recharging - 50mm bolt spacing to fit most rear racks

Sporting your favorite bike shop logo, these Voile Straps® are made of tough stretch polyurethane, with a UV-resistant additive to increase their lifespan. Their Super Tough nylon buckle is non-marring, non-conductive, and non-reflective. Few things in life are as reliable as the original Voile Strap®. Over the last 30 years they have become the ultimate alternative to duct tape, nylon straps, and bungee cords. On the job, in the outdoors, and everywhere in between: they are the definitive way to secure, bundle, and repair almost anything on the go.

For all models with the QL2.1 system. Inserts are available for the two upper 16-mm mounting hooks that come with the proven QL2.1 mounting system. The inserts allow you to securely attach your ORTLIEB pannier to virtually any bike rack with smaller tube sizes (16 mm). DETAILS (PER PANNIER): - 1 pair of 8-mm inserts - 1 pair of 10-mm inserts - 1 pair of 12-mm inserts

Models with the QL1 system from 2005; Models with the QL2 system. The right hook inserts allow you to securely attach your ORTLIEB pannier with its proven QL1 or QL2 mounting system (16 mm) to virtually any bike rack. - 2 inserts measuring 8 mm - 2 inserts measuring 11 mm

Replacement stays for a variety of Tubus racks. Every roundstay is made out of solid aluminum, and they are available in various lengths and offsets. - 8mm diameter stay - Drilled for M5 bolts

Replacement hardware, bolts and nuts for Wald baskets. Works with Wald Basket models: 520, 520GB, 535 and 535GB

Description These Voile Straps® are made of tough stretch polyurethane, with a UV-resistant additive to increase their lifespan. Their Super Tough nylon buckle is non-marring, non-conductive, and non-reflective. Few things in life are as reliable as the original Voile Strap®. Over the last 30 years they have become the ultimate alternative to duct tape, nylon straps, and bungee cords. On the job, in the outdoors, and everywhere in between: they are the definitive way to secure, bundle, and repair almost anything on the go. Specifications: - Usable Length Range: 4.3in — 9.4in / 10.7cm — 23.7cm - Material: UV-Resistant Polyurethane - Buckle: Super Tough Nylon

Banjo Brothers' Phone Wallet is ingeniously simple and effective. This durable, water-resistant pouch weighs next to nothing yet it keeps your phone, ID, and spare key protected. It features a full-length zipper and a headphone slot, too.

Disc brake compatible leg for Megarack

- 4 removable plastic hooks - To tighten, pull inner cord over additional hook - 25cm x 25cm (10" x 10") unstretched - Durable 3.5mm diameter bungee cord

For all models with the QL2.1 system. If your mounting system-s lower anchoring hook is lost or worn, you can easily replace it with a new anchoring hook. DETAILS: - 1 anchoring hook and mounting screw

For all models, including the Back-Roller and Sport-Roller, with Stealth buckles Need to replace a pair of broken buckle? - 2 plastic buckles (male and female ends, 25 mm, black)

It's always a good idea to have backup hardware. This is a replacement hardware pack for Portland Design Works Payload or Loading Dock rear racks. - 2x P clamps - 4x nyloc nuts - 4x hex bolts

These are simple polished stainless steel struts which can be used to mount many of our racks to your bike's brake bridge or fork crown. Available in Small and Large sizes. - Small is 8.5cm long from end to end - Useful for mounting our Constructeur Rear Rack to your brake bridge. - Useful for mounting our Constructeur Rear Rack to your brake bridge. Also used for mounting our Randonneur, Constructeur Front, and Porteur Racks to your bike's fork crown. - Note: not required if you mount the rack to metal fenders, as is traditional.

The Original Gear Strap Made in USA Voile Straps will securely hold your cargo where you need it. Strap down gear to your bike frame, handlebars, seat rails, or rack, or upgrade the existing straps on your cargo cage or pack. They’ve become an essential part of our everyday kit. We’ve seen these straps used worldwide on ski trips and bikepacking expeditions, and for everyday uses from backyards to roof racks. These straps will outperform and outlive the nylon webbing, straps, or cords you’re currently using. High performance polyurethane makes these straps durable, UV and moisture resistant, and workable in cold conditions. The slim-profiled buckles are forged of heat-treated aluminum and are both durable and lightweight.

Featuring composite construction, Lezyne's Caddy QR Mount provides a simple attachment to your seat rails. It's compatible with all Lezyne QR Caddys.

- The seat bag alternative - Stash your stuff at a lower center of gravity - Two convenient size options, small or large

Topeak's Cargo Net works with the Trolley Tote or MTX Rear Basket (sold separately). Make sure your goods stay in place on those bumpy rides home!

QuickClick mount for racing type saddles. Works with all Topeak Wedge Bags. - Material : Injected Nylon - Weight: 30g / 1.06 oz

A classic Wald design, this Flashlight Holder can clamp a standard size flashlight to your handlebar or serve as a convenient wall mount.

The shoulder strap for your Ultimate Compact, Bike-Box, E-Glow, E-Mate, Velo-Shopper, Trunk-Bag RC or Bike-Tourer is just what you need to carry on once you reach your destination. CONTENT: - 1 shoulder strap with plastic pad

Sold as 3 pairs (6 pieces) Foam spaces help to push your bar bag away from the bars, freeing up room for your cables, fingers, bell, or heck, even a small lizard! Our spacers are Die-cut right here in the UK from a very high quality and high-density PE Foam. We believe this makes them the best made in UK spacers available. Perfect for Lil Prestos or if you're running your Shazam on the front. Made in Birmingham, UK

This mounting set allows you to attach your Saddle-Bags to other bicycles. For all Saddle-Bag, MudRacer and Micro models. - 1 mounting set for Saddle-Bags, including screws

By using the accessory bolt mounts on a frame or fork, the Wald Standoff kit allows the user to space a basket or rack away from other components that would otherwise be in the way, like disc brake calipers. - 2 Phillips head frame bolts in 1.5-inch (38mm) length - 2 Standoff spacers in 1-inch (25.4mm) length

To avoid chafe marks on the handlebars, you can simply re-order these foam pads as a set of 5. CONTENT: - 5x distance pads, grey

Description 20% thicker, 25% wider. The XL Series straps aren't only bigger, they are also the strongest ever. These Voile Straps® are made of the same tough stretch polyurethane, including the UV-resistant additive that increases their lifespan. Their heavy-duty heat-treated aluminum buckle features a slim profile for packing efficiency and extra durability. Few things in life are as reliable as the original Voile Strap®. Over the last 30 years they have become the ultimate alternative to duct tape, nylon straps, and bungee cords. On the job, in the outdoors, and everywhere in between: they are the definitive way to secure, bundle, and repair almost anything on the go. Specifications: - Usable Length Range: 7.1in — 19.5in / 18.1cm — 49.5cm - Material: UV-Resistant Polyurethane - Buckle: Hardened Aluminum

The B-RAD Dogbone allows for the bottle cage to mounted off center with additional B-RAD accessories, without needing the B-RAD base. Most commonly used for smaller, curved or dual suspension frames where the slotted bases won't fit or are not needed.

Replaces stock Streamliner foot to adapt any Streamliner rack (sold separately) to fit onto standard 10mm nutted wheel axles. Ideal for fixies, cruisers, urban bikes and traditional bikes without eyelets. CONSTRUCTION • Aluminum ADDED BENEFIT • Makes the Streamliner rack (sold separately) even more versatile

Replacement waterproof liners for Banjo Brothers bags. To get correct replacement liner, measure across the top edge of liner from one welded seam to the opposite seam (do not measure to cut edges of liner). Medium liner is 11" wide and Large is 12" wide. - Works only with models 01150, 01150R and 01150W - Welded seams - Not suitable as a stand-alone bag

- Stretch web secures those hard-to-hold items - Great for any rack - 4 easy-to-handle molded hooks attach anywhere - Dimensions 11" x 11"

A stretch web net that helps secure items to a rear rack. - Four nylon molded hooks for rack attachment - Fits any rack - Dimensions: 11 x 11" - Custom-molded silicone - Stretches to three times its size

Ultralight stake bags made with love (and Dyneema). Hi-vis cinch with reflector for safe storage. NEW tapered design (in Blueberry). Specs: - Small: 7" x 2.75" (this size made to snugly fit MSR groundhog mini stakes) - Large: 9" x 3.5" - Weight: 1-2g Materials: - Green (1.43oz DCF) and White (.8oz DCF) - Micro cord w/ reflector

The EXP Series Direct Mount Thumb Screws allow for quick and easy attachment of Salsa EXP Series Direct Mount Packs to bicycle frames equipped with direct-mount locations. - Can be installed and removed by hand or with allen key - Includes necessary 0.5 mm washers and 4 mm spacers - Sold in packages of two

Stash your ride snacks, repair kit, keys or other ride essentials in this secure and stylish Angry Catfish logo KEG. - Fits in standard bottle cages - Keeps contents secure and dry - Easy screw-down top - 16 oz

Metric screws and plastic screws for mounting the upper QL2.1 rail. For all models with the QL2.1 system. CONTENT (FOR ONE PAIR OF BAGS): - 4x metric screws incl. nut washers - 2x self-tapping screws incl. plastic washers

Our Silicone tape has lots of uses. It sticks to itself, leaves no adhesive residue, adds grip and padding. Wrap it on frame contact points, use as a chain stay protector, wrap your brake levers, seal blown hoses on your car...the list goes on. This tape bonds to itself for adhesion, once applied it forms a semi-solid wrap and should be considered one application only. It can be easily cut off rather than unwrapped. Sold in 10' rolls in clear.

The Loop Junk Strap is the same 120cm woven nylon strap with a stainless steel buckle that Surly's regular junk strap is. The Loop Style Junk Strap, however, has a loop sewn at each end of the strap so you can wrap them around small diameter tubing like that used for racks and handlebars. They secure in the middle with the stainless steel buckle. Surly made these Loop Style Junk Straps because it offers another method for those wanting to secure cargo to their racks and or bikes. Junk Straps of any kind are useful in many different situations so toss a few in your backpack and always be ready to tie something to anything else. - For general tie down use - 42" loop strap, plus 8" closure buckle strap

The Bungee Booster is a quick and easy way to add some extra capacity (as well as some color) to any of our bags with parallel webbing daisy chains. Just lace the durable elastic cord through the loops of the daisy chain and slip the cord lock on for adjustability. Cut to length to fit whatever bag you choose.

The Bungee Booster is a quick and easy way to add some extra capacity (as well as some color) to any of our bags with parallel webbing daisy chains. Just lace the durable elastic cord through the loops of the daisy chain and slip the cord lock on for adjustability. Cut to length to fit whatever bag you choose.

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum