Packs/Racks/Baskets

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base

B-RAD Half Bottle Mounts allow for cargo customization and cargo optimization. Designed to work in tandem with B-RAD Base, the Half-Bottle Adaptor moves the bottle over about half a bottle radius to make it easier to access. The Accessory strap mounts can be mounted to the other side providing a mounting point for additional items. - Mounts to the B-Rad base mount (not included

I think we can all agree that baskets are rad, but why not take your basket to the next level with an Alakazam basket bag!? With its expanding capacity and super quick attachment to the bike, Alakazam is the best companion for around town errands. Out in the wilds, you have an amazingly secure and easy to access bag that puts most bikepacking bags to shame. If you're a throw and go kinda person, then perhaps basketpacking is for you. Designed to fit oh so snuggly in the classic Wald 137 & 139 baskets. The rolltop design means the Alakazam can hold huge loads, but we know sometimes you need to carry something just a little bit bigger… like a pizza… Or four of them! The included "Pizza Straps" make attaching even the biggest load a breeze. Foam padding on the lower section of the bag provides a little bit of cushion to protect your things. A one-piece floating liner means the Alakazam is the most weatherproof bag we make. Made in-house, London, UK.

Sold as 3 pairs (6 pieces) Foam spaces help to push your bar bag away from the bars, freeing up room for your cables, fingers, bell, or heck, even a small lizard! Our spacers are Die-cut right here in the UK from a very high quality and high-density PE Foam. We believe this makes them the best made in UK spacers available. Perfect for Lil Prestos or if you're running your Shazam on the front. Made in Birmingham, UK

The Hobgob is our premium mid-size Hip Pack, big enough to swallow everything you need for a day in the woods or gobble up all your special items on longer bikepacking trips. For maximum all day comfort Hobgob has its buckles moved away from your tummy and onto the wide padded wing. There is a structured and padded back panel, with airflow channel to help keep you cool. The belt will fit waists up to 55” / 140cm, or bigger if you go Custom. Gear organisation is taken care of thanks to a large zippered front pocket and two internal elasticated mesh drop pockets featuring a key leash and clip, as well as an elastic bungee system under the bag perfect for stashing a jacket. The optional Quick Draw Bottle Pocket provides secure storage of, and one-handed access to a bottle whilst riding. Made in-house, London, UK Features - Key Leash and clip - Molle attachment on right wing for optional bottle attachment - Fidlock hook main buckle - Two spacious elastic mesh drop pockets inside - Reflective detailing - Optional bottle pocket has full 1-handed use - Air flow channel and spacer mesh keep you cool - Wide wings for max comfort - Wide 40mm strap Specifications - Volume: 4.8L - Belt Size: To fit up to 55" / 140cm - Dimensions: 30cm Wide x 17cm High x 9cm Deep - Weight: 425g + 60g for Bottle Pocket

This charming wee bag mounts to either handlebars or saddles (with saddle loops. i.e., Brooks) and is designed for happy-go-lucky scamps that need to be prepared for anything. Big enough to stash an extra layer, keep your phone to hand and carry your lunch, the Lil Presto! is the perfect companion for a day out, whatever kind of rider you are. Maybe you need to carry some spare socks, travel scrabble, or a whole lot of pesto? Be our guesto with a Lil Presto! By choosing a hard-shell construction the Lil Presto benefits from one handed on the bike access and exceptional stability. This stability is further increased by the included Voile Nano Straps, which won't mark your carbon bars. The YKK Aquaguard Zip and Cordura fabric help to protect your contents from the elements whilst maintaining ease of access. Made in-house, London, UK

For the adventurous among you that need to carry more stuff, the Shazam! saddle bag is here for all your advanced stuff carrying needs. Got a bikepacking trip this weekend? Maybe you just need to carry lots of stuff with you on the daily commute and you're sick of tying your jumper around your waist? With a sizable carrying capacity, able to be used on the bars or saddle, and the added bonus of looking cute on and off the bike, Shazza will most certainly snazza up any ride. Available in two sizes, the Mini size is a perfect bar bag for long day rides, or a great saddle bag for smaller riders. The Regular size is the go-to for bigger folks and bigger trips. Constructed with a plastic sheet and reinforced at the attachment bar with an aluminium length, Shazam is the most stable saddlebag out there. The expanding rolltop and long flap provides adjustable and flexible carrying capacity (we see you emergency grocery trip!). Made in-house, London, UK

Teeny Houdini is an easy to install, minimal saddlebag designed to hold a tube, tire lever, multi tool, CO2 and even a couple of nice rocks you might pick up along the way. Why not free up space in your bar bag (for more snacks) by keeping your boring things in the rear, or set and forget so you're never caught unprepared for a puncture (or snack) emergency again! Available in two sizes; small, designed to fit a road tube, and medium, for a gravel/road plus/mtb tube. The Flap style opening allows the bag to adjust in size, just in case you find that must keep rock. Fastened with a Fidlock magnetic buckle (and a satisfying click!) the Teeny Houdini makes it easy to access your teeny things while it's still on the bike. Made in-house, London, UK

When searching for a bag partner we looked locally to the folx who we think are the best in the business, the North Shore’s own, Cedaero. Their commitment to quality and to sourcing only made in the USA components is something that really calls to us, and the fact that they are incredibly kind and wonderful human beings sealed the deal. We’ve worked with them to select colors and combinations that are both stylish and timeless, and that will age to perfection with use. Cedaero Bar Hopper: From town to trail, handlebar bags are ideal for all types of riding and adventures. This one sports a gusseted zipper for easy access to your items and a velcro One-Wrap strap and daisy chain on the backside to ensure that things stay composed when everything else gets rowdy. These are a must in any cyclist’s repertoire of accessories. *Note: canvas packs may require occasional re-waxing with heavy use, and cannot be run through the washing machine - Brush Brown Waxed Canvas - Made in Minnesota of domestically sourced materials - 1000D Cordura Nylon or 15oz Martexin Waxed Canvas Exterior - 200D Nylon Silver Lining - 9.5” Wide x 5.5” Diameter - Velcro One-Wrap strap stem/steerer tube strap - Daisy chain on the front for various accouterments - #9 Ideal Zipper with Nanosphere Coating - Interior Pocket and Key Hook

When searching for a bag partner we looked locally to the folx who we think are the best in the business, the North Shore’s own, Cedaero. Their commitment to quality and to sourcing only made in the USA components is something that really calls to us, and the fact that they are incredibly kind and wonderful human beings sealed the deal. We’ve worked with them to select colors and combinations that are both stylish and timeless, and that will age to perfection with use. Cedaero Tank Top Bag: Think of this as a go-to pack for all the items you need to quickly access like cell phone, food, keys, basic tools, etc. The Tank Top has two Velcro & ToughTek cinch straps and a moveable Velcro OneWrap cinch on the stem. The burly water-resistant #9 zipper enables easy single-handed opening without sticking, while internal foam padding provides some cushion and gives structure to the pack. The interior is equipped with a flat mesh pocket and a key hook. The strap version Tank Top fits most bikes, however, the large joint where the down tube meets the top tube on some mountain and fat bikes require Cedaero’s Velcro Strap Extension necessary. * Please Note: Waxed canvas packs may require occasional re-waxing with heavy use, and cannot be run through the washing machine - Brush Brown Waxed Canvas - Made in Minnesota of domestically sourced materials - 1000D Cordura nylon or 15oz Martexin Waxed Canvas exterior - 200D Nylon Lining - #9 Ideal Zipper with Nanosphere Coating - Interior Pocket and Key Hook - Dimensions: 9" x 4.25" x 2.25" - Capacity: 1L

Great products often come from our own needs and wishes... As what some might call dry bag enthusiasts, it is our utmost pleasure to make available a product that's long been kicking around in our heads and solves a problem with our existing setups. Namely: one bag that works with a bunch of racks and is quick to swap between bikes. Meet the Rack Buddy! A versatile, simple, and multi-use rack bag that's incredibly quick to take on or off, can be easily swapped from bike to bike or rack to rack, can convert to a tote bag for running errands, or can be used as a stuff sack or dry bag when traveling. The fabric is a favorite Made in USA waxed canvas 7oz sail cloth that will only gain beauty with age and use and they are sewn right in our South Minneapolis neighborhood by our friendly local bag maker, James from Beard Bags. They will serve you well for years to come. The four velcro straps have shown themselves to be plenty for keeping the Rack Buddy secured during our testing, but if you're running a heavy load, over stuffing, shredding trails or whatever, you might want to use an additional strap. - Sewn in Minneapolis - Made from USA made 7oz Sail Cloth - D-Rings to attach a shoulder strap - External velcro pocket - Cordura Liner - Four Velcro straps to attach to rack platforms - Base: 6"x 9.5" - Height Unrolled: 18.5" Verified to work great with: - Surly 8 and 24 Pack Racks - Wald Baskets - The old Velo Orange flat top rack on Jeff's Townie

We teamed up with our pal James at Beard Bags to create these awesome seat bags right here in our South Minneapolis neighborhood. They are built with Made in the USA waxed canvas from Fairfield textile and will age beautifully with use. The Adventure size is designed to fit a 29'er size spare tube, multi tool, tire levers, spoke wrench, chain tool, and a spare derailleur hanger. Size: 4 x 7 x 2" The Gravel Size is designed to fit a 700 x 32c size spare tube, multi tool, tire levers, spoke wrench, chain tool, and a spare derailleur hanger. Size: 3 x 6 x 2" Use our included strap our your own preferred Voile or toe strap to quickly attach to your saddle rails. There's also an optional loop on the end if you'd also like to attach it to the seatpost.

The Widefoot CargoMount™ is the original one-piece aluminum cargo cage. Securely strap down a variety of bottles, smaller bags, and cylindrical objects to your bike frame or fork. Made of sturdy and lightweight aluminum, and available in anodized Black, Silver, Purple, Orange, and Blue finishes. Weighing just 66g, it’s among the lightest cargo cages on the market. Attach your CargoMount to three-bolt mounting systems using our unique 7-slot configuration, which allows fine tuning at multiple positions on frames and forks. For more information on installation and use, see Description below, and Voile Straps page. Installation and Use: A) Install CargoMount by using three bolts to secure to frame or fork mounting bosses. Use 2 bolts and non-bolt mounting applications at your own risk. B) Thread two straps through, then around the outside of the CargoMount. Wrap straps around your cargo, and securely fasten according to your straps instructions so that movement of cargo is eliminated. Tuck away any loose ends, and keep away from moving parts. Use of two straps is always recommended. Note: Mounting hardware is not included. Installation by a professional bicycle mechanic is recommended. Consult with your bicycle manufacturer if you have questions about compatibility with your bike frame or fork. Use of two straps is recommended. Always ensure your CargoMount, straps, and cargo are securely fastened and not interfering with moving parts before riding.

In 2019 the CargoMount™ Classic created a new class of single piece aluminum cargo cages. The CargoMount™ builds on this design by utilizing an internally threaded tube to create a strong, low-profile, and removable load support. Securely strap down a variety of bottles, smaller bags, and cylindrical objects to your bike frame or fork. Constructed from durable and lightweight 5052 aluminum, this cargo cage comes in anodized finishes of Black, Silver, Purple, and Orange. The regular size weighs only 78g with the load support, while the Mega version weighs 98g, making it one of the lightest cargo cages available. Attach your CargoMount to three-bolt mounting systems using our unique slot configuration, which allows fine tuning at multiple positions on frames and forks. For more information on installation and use, see Description below, and Voile Straps page.

The 157's little brother, this basket is just as functional. Some people don't need to cart around large pizzas or multiple full size grocery bags, so this basket is for the more streamlined commuters and delivery pros. Sturdy one-piece legs offer all the support you'll need when hauling heavier loads. - Fits most bikes - Adjustable legs mount to front axle for a secure fit - 15" x 10" x 5" deep - Easy to install

The 157's little brother, this basket is just as functional. Some people don't need to cart around large pizzas or multiple full size grocery bags, so this basket is for the more streamlined commuters and delivery pros. Sturdy one-piece legs offer all the support you'll need when hauling heavier loads. - Fits most bikes - Adjustable legs mount to front axle for a secure fit - 15" x 10" x 5" deep - Easy to install

The 157's little brother, this basket is just as functional. Some people don't need to cart around large pizzas or multiple full-size grocery bags, so this basket is for the more streamlined commuters and delivery pros. Sturdy one-piece legs offer all the support you'll need when hauling heavier loads. This rack cannot be used on bicycles with front suspension systems or springer forks. - Standard front bicycle basket fits most bikes - Adjustable legs mount to front axle for a secure fit - 18" x 13" x 6" deep - UV Weather-resistant bike basket - Available with wooden bottom to better hold your cargo

Description These Voile Straps® are made of tough stretch polyurethane, with a UV-resistant additive to increase their lifespan. Their Super Tough nylon buckle is non-marring, non-conductive, and non-reflective. Few things in life are as reliable as the original Voile Strap®. Over the last 30 years they have become the ultimate alternative to duct tape, nylon straps, and bungee cords. On the job, in the outdoors, and everywhere in between: they are the definitive way to secure, bundle, and repair almost anything on the go. Specifications: - Usable Length Range: 4.3in — 9.4in / 10.7cm — 23.7cm - Material: UV-Resistant Polyurethane - Buckle: Super Tough Nylon

For bears! The Ursack Major is a lightweight yet extremely durable alternative to traditional canisters and is one of Ursack's best-selling products. All Ursack bear bags are made of ultra-high-performance UHMWP fabric and designed to prevent bears from getting your food in their territory. OPSAKS Available HERE: Recommend the 12x20 Features: - Certified Bear Resistant - Collapsible and easy to store - 6 foot–high tensile strength with reflective tracer - Reflective Exterior Tag for increased visibility at night ***Discounts are not available on Ursack products. Specs: - Volume: ~10.65L - Capacity: ~5 days of food for 1 person - Dimensions: 12.5" W x 18" H - Weight: 7.6oz Materials: - UHMWP fabric

If your fork has inside and outside eyelets, then the DUO is your right choice. Just as the TARA, DUO tolerates extreme loads and almost all panniers. It also ­features a longitudinal hole for optimal fit and increased flexibility. Not suitable for mounting on spring or carbon forks without eyelets. The fork must be approved by the manufacturer, or by the bicycle manufacturer for mounting a carrier. There must be no crimping. - Material: 25CrMo4 - Size: 26" | 28" - Weight: 560 g | 19.8 oz - Loading Capacity: 15 kg | 33.1 lbs - Diameter: 14 / 10 mm | 0.6 / 0.4 in

The Fly is a lightweight carrier designed to carry panniers on a fast road or cross bike. Created with narrower tires in mind, the V-shaped Fly Evo allows for a low profile while protecting the rear wheel. It also features 3D-feet for simpler mounting. A single adjustable strut mounts the Fly to the bake bridge, making it a minimalist's dream. - Weight: 330 grams/11 ounces - Capacity: 18kg/39 pounds - Wheel size: 26-inch/700c

Made for traveling: The top rail is designed extremely narrow, still offering enough space to fit a tent, mattress and sleeping bag. Your panniers are mounted one level down. This lowers the center of gravity and improves the riding stability of your bike. In combination with TARA our LOGO models make the ultimate dream team for long-distance traveling. The LOGO also fits on particularly short frames. - Material: 25CrMo4 - Size: 26'' | 28' - Weight: 800g | 28.2 oz (26" | 28") - Loading Capacity: 26 kg | 57.3 lbs - Diameter: 10mm | 0.4 in

The travel-master Logo has been updated with 3-D feet with perfect force absorption and an integrated screw attachment. The super-light mounting parts for mounting the stays to the frame and klick spring clamp as well. The Evo has the typical lower rail of the Logo classic, lowering the center of gravity and improving the riding stability. - Weight: 730g/1.6 pounds - Carrying Capacity: 40kg/88 pounds

The Tara is the most durable, most versatile lowrider rack Tubus makes. It has been Tubus' best selling front carrier for more than 18 years, and Tubus has been improving it along the way. It's incredible strength comes largely from its massive 14mm chromoly main tube and simple design. When used in combination with the Cargo, Tara is the perfect match for long-distance biking. - Separate eyelets for mudguard mounting are also included - For the fat tire applications, see the Tubus Tara Big Apple - Weight: 500 grams/17.6 ounces incl. hardware - Capacity: 15kg/33 pounds - Wheel Size: 26-inch/700c *Not suitable for mounting on suspension or carbon forks without eyelets. Be sure your fork is approved by the manufacturer, or by the bicycle manufacturer for the installation of a rack.

The Ardea Pack is in equal measure a hip pack and a bicycle handlebar bag. Mounted at the bars of your bicycle, the hip pack straps stow discreetly out of sight. The bag secures to the bars with two camlock straps. No racks necessary. The 2.5 liter pack was built for your essentials, like a fly fishing kit, sunscreen, maps or snacks. There are two exterior webbing straps on the base of the Ardea Pack to securely carry either your wind breaker or packable fly rod. The Ardea Pack easily transitions into a waist bag that’s ready for angling, hiking and trail running. Broad hip supports offer stellar stability when you’re on the move, and add real-estate for a Sidekick Stem Pouch and Rando Pocket. Swift Campout is a global call to go bike-camping on June 24th and 25th, 2023. For the 9th year-in-a-row thousands of adventurous spirits will load camping gear on their bikes for a weekend outing. Here at Swift, we believe that there’s little better than spending the longest day of the year on a bicycle and the shortest night of the year sleeping under the stars. To celebrate this year’s campout we put together a fun and fantastical collection featuring art from our multi-talented Content Marketer, Will. Inspired by the 90s cartoons many of us grew up with, we hope this collection gives you some summery nostalgia as well as excitement for adventures to come. Shell Fabrics: Dimension Polyant X-Pac Mulberry VX21 & Black VX21 Also Features Dyneema ripstop lining fabric Breathable spacer mesh backing YKK water-resistant exterior zippers Convertible hip pack design Integrates with the Sidekick Stem Pouch and the Rando Pocket Internal and External organizing pockets Exterior front zipper pocket Camlock buckles for fast attachment Made in Seattle, WA. Dimensions: Measurements: 10” w x 6” h x 2.5” d Capacity: 2.5 Liters Weight: 10 oz Waist Belt Sizing: 26" to 51"

The Ardea Pack is a bicycle handlebar bag that converts into a kick-ass hip pack. The transformation is as simple as it is genius. Add to the Adrea Pack's 2.5 Liter capacity by attaching the Sidekick Stem Pouch and/or the Rando Pocket to the hip stabilizers of the Ardea when it's in hip-pack mode. The Ardea Pack is an excellent accessory for mountain biking, gravel rides and tooling around town. The Ardea Pack is made out of Challenge ECOPAK 100% recycled polyester and contains roughly 8 plastic bottles rescued from ocean beaches. The Ardea Pack is in equal measure a hip pack and a bicycle handlebar bag. Mounted at the bars of your bicycle, the hip pack straps stow discreetly out of sight. The bag secures to the bars with two camlock straps. No racks necessary. The 2.5-liter pack was built for your essentials, like a fly fishing kit, sunscreen, maps or snacks. There are two exterior webbing straps on the base of the Ardea Pack to securely carry either your windbreaker or packable fly rod. Features: - 400 D Packcloth Lining throughout the body - Breathable spacer mesh backing - YKK water resist exterior zippers - Convertible hip pack design - Integrates with the Sidekick Stem Pouch and the Rando Pocket - Internal and External organizing pockets - Exterior front zipper pocket - Camlock buckles for fast attachment Dimensions: - Measurements: 10" w x 6" h x 2.5" d - Capacity: 2.5 Liters - Weight: 10 oz - Waist Belt Sizing: 26" to 51"

The Bandito Handlebar and Saddle Bag is the perfect size for your tools, a windbreaker and your small stuff. Damn, it’s cute. - Attachment strap spacing for Brooks™ saddles and the likes - Attaches to handlebars - Side dee-rings for a shoulder strap - Voile™ attachment straps - Die cut Coverlite™ daisy chain - Front Zipper storm flap - Lighter-weight - Horizontal front daisy chain, use straps to attach a mini hand pump, slide on a reflector, and more!

At a compact 7.5L, the Catalyst Pack has easily made its way onto our top-seller list as a go-to-gravel-adventure-bag. Riders with less clearance and narrow handlebars now have a stellar option for stowing gear on their handlebars and under the saddle. The Catalyst Pack is made out of Challenge ECOPAK 100% recycled polyester and contains roughly 10 plastic bottles rescued from ocean beaches. As any rider of smaller stature will tell you, when it comes to bike bags, there's a fine line between, "big enough to haul my adventure gear and too big for my small frame." With an unmistakable design nod to the Zeitgeist, the design objective of the Catalyst was answering the specific needs of smaller riders. The result is a beautifully functional mid-capacity bag that works well for everyone! Features: - Challenge Sailcloth recycled polyester bag cloth rip stop (450D) - Flap lined with TPU-coated 70D nylon ripstop for excellent water resistance - 400 D Packcloth Lining throughout the body - HDPE insert in body to help shape and stabilize your load - Interior features one-handed drawcord closure with an additional compression strap to compact your load. - Flap features small zipper pocket, webbing daisy chains for additional lash points, and reflective detailing - D rings for off-bike shoulder strap compatibility - Comes with foam spacers and 9" Swift Straps - Made in Surabaya, Indonesia, and Seattle, WA out of recycled materials Dimensions: - Measurements: 11"w x 7"h x 6"d - Capacity: 7.5 Liters - Weight: 15oz

When you're on-the-go, stopping your flow to access your essentials should never be a hassle. The Every Day Caddy is a compact under-the-saddle bicycle bag for your ride's smaller essentials. Whether your daily grind is an urban bicycle commute or a post-work trail rip to blow off steam, your kit includes a handful of items you feel naked without. Maybe that's tools and a spare tube, or a windbreaker and a first-aid kit. Whatever you're packin', we fully embraced the EDC ethos to develop the compact, under-saddle Every Day Caddy. The Every Day Caddy is made out of Challenge ECOPAK 100% recycled polyester and contains roughly 4 plastic bottles rescued from ocean beaches. Features: - Challenge Sailcloth recycled polyester bag cloth rip stop (450D) removable drop liner - Nylon webbing - HDPE insert - Fastex buckles - Coverlite™ - Made in Surabaya, Indonesia, and Seattle, WA out of recycled materials Dimensions: - Measurements: expands to approx 9"L x 3.5"W x 2.5"D - Capacity: 1 Liter - Weight: 3.75 oz

The super-sized Gibby Stem Bag is designed around a 32oz Nalgene bottle, giving it enough capacity to keep your snacks, hydration, and/or other essentials safe and sound, even on your longest, roughest bicycle adventures. The Gibby Stem Bag is made out of Challenge ECOPAK 100% recycled polyester and contains roughly 3 plastic bottles rescued from ocean beaches. The Gibby Stem Bag provides convenient storage on the stem and handlebars without compromising precious real estate for your hands. The Gibby Stem Bag has a liter more capacity than our Sidekick Stem Pouch and offers super-functional, one-handed entry and closure. Carry your valuables confidently knowing that the Gibby Stem Bag features added padding. The daisy-chain mounting system provides stable attachment on a variety of handlebars and stems making this bag a worthy companion for bicycle commuting, touring, gravel riding, and mountain biking. Features: - Challenge Sailcloth recycled polyester bag cloth rip stop (450D) - One-handed open and close cinch - Comes with 3 Omni Wrap velcro attachment straps - Vertical and horizontal daisy chains allow - Flexible attachment to handlebars and stem - Unique crescent shape to minimize knee-strike - Bottom drain hole Dimensions: - Measurements: 5" w x 9.5" h x 3" d - Capacity: 2.25 Liters - Weight: 3.5 oz

Waste not, want not is the rallying cry behind the Hold Fast Half Frame Bag. Pack smarter by making clever use of the inner triangle of your frame. Finally! A practical home for awkwardly shaped essentials like your pump, your tent poles, or your hydration bladder. Running frame-mounted water bottles? Don’t fret: We took extra care to maintain clearance so you can easily slip your bottles in and out of their cages. The Hold Fast Half Frame bag will add functional capacity to your setup, whether it’s for your daily commute or an overnight adventure! The Hold Fast Half Frame Bag is made from recycled polyester and contains roughly 5-7 recycled bottles rescued from polluted rivers. Description The space beneath your top tube has always been a coveted zone for convenient and spacious storage capacity, and with the Hold Fast Half Frame Bag, Swift Industries has at last entered the triangle! The roomy main compartment, accessed by a water resistant zipper, is a perfect home for long or oddly shaped items commonly used by cyclists — think pumps, locks, water bladders, etc. On the non-drive side of the bag you will find a small zipper pocket with room to stow a wallet and snacks. There’s even more to the Hold Fast Half Frame Bag: on the underside we added an external daisy chain that runs the length of the bag to give you the flexibility to add capacity or quickly lash on last-minute or mid-ride items to the bottom. In order to accommodate different frame sizes the Hold Fast Half Frame Bag comes in three sizes. Please, check the measurements of each size and measure the internal dimensions of your frame to get the bag that will fit best. Grab your measuring tape and queue up our Hold Fast Half Frame Bag sizing guide here. Cool Features - Challenge Sailcloth ECOPAK (EPLX400) shell fabric - Challenge Sailcloth recycled polyester bag cloth rip stop (450D) - Large, main pocket and small, external organizer pocket - Water resistant zippers - One-wrap velcro attachment straps - Hydration hose/cable port on top panel of bag Measurements - 2.75 L: 17.5” X 4” X 2.25” - 3.25 L: 19.5” X 4.5” X 2.25” - 4 L: 21” X 5.25” X 2.25”

The Kestrel Handlebar Bag is an ideal size for adventurous day trips. It's easy to attach, features interior and exterior zipper pockets and is MOLLE compatible. The Kestrel is purpose-built for handlebar functionality and is elevated by its modularity: Add a Sidekick Stem Pouch or Rando Pocket onto the back of the bag for even more carrying capacity. The Kestrel Handlebar Bag is made out of Challenge ECOPAK 100% recycled polyester and contains roughly 5 plastic bottles rescued from ocean beaches. Features: - Fully lined with 400D Nylon Packcloth - Exterior Coverlight™ lash tabs for mounting to handlebars - Exterior bottom Coverlight™ daisy chain for lashing a small pump or fly rod - YKK water resist zippers - Exterior and interior pockets for organization or small items - Simple shock cord & cord lock attachment for head tube - Lash points for bedroll straps on top and bottom of rear panel - Modular integration with the Sidekick Stem Pouch and Rando Pocket - Made in Surabaya, Indonesia out of recycled materials. Dimensions: - Measurements: 10"w x 5"h x 3"d - Capacity: 2L - Weight: 6 oz

The small-but-mighty Moxie Top Tube Bag is sure to be a permanent accessory on your trusty, two-wheeled steeds where it tucks nicely into the nooks and crannies of your bike. This secure bicycle top tube bag puts essentials like snacks, gloves or your phone at arm's reach and just a zipper pull away. A dream cockpit set-up combines the Moxie Top Tube Bag with Sidekick Stem Bag or the Gibby Stem Bag. The Moxie Top Tube Bag is made out of recycled polyester and contains roughly 2 plastic bottles rescued from polluted rivers. Coming in at around half a liter of volume, the Moxie Top Tube Bag is the perfect home for smaller gear and snacks protected by a water-resistant zipper for ease of access and tough ECOPAK™ fabric. We built in added protection for delicate cargo with side-wall stiffeners and a layer of padding. The daisy chain webbing attachment system paired with One Wrap velcro straps (included in the purchase) allows for flexible attachment. Features: - Challenge Sailcloth recycled polyester bag cloth rip stop (450D) - Nylon mesh stiffener - Closed cell foam padding - YKK water-resistant zipper - Comes with 3 One Wrap Velcro attachment straps and flexible mounting points - Made in Surabaya, Indonesia out of recycled materials. Dimensions: - Measurements: 4.125" x 8.5" x 2" - Capacity: 0.6 Liters - Weight: 2.75 oz

If your idea of a good time includes shredding singletrack or ripping rougher terrain on bikepacking adventures, the Olliepack Seat Bag is your new back-of-bike best friend! A great addition to any off-road rig, the Olliepack Seat Bag offers a straightforward, roll-top closure providing added water resistance as well as variable capacity to suit your carrying needs throughout the roughest of rides. No rack or hardware needed to lock this bag tight under the saddle and out of the way enough to get your bum behind the saddle while negotiating steep descents or tight trails. Combine the Olliepack Seat Bag with a Zeitgeist Pack, Hold Fast Half Frame Bag, a couple of Gibby Stem Bags and the Moxie Top Tube Bag for a perfect, lightweight rack free overnight setup. This seat bag stays snug and stable on the most rugged terrain with the trusty help of secure saddle rail buckle straps and a wide, grippy seat post velcro strap. Close the bag and compress your gear by rolling and cinching the main compartment. Once the main hatch is closed, an external power mesh stash-pocket allows for quick storage of a lightweight layer, wrappers and more. Reflective detailing on the compression straps keeps you visible on the road. The Olliepack Seat Bag is made from recycled polyester and contains roughly 10 recycled bottles rescued from polluted rivers. Features: - Roll-top closure - Side compression buckles - Center compression strap with reflective tape - One Wrap velcro seat post strap - Saddle rail buckle straps - Made in Surabaya, Indonesia and Seattle, WA out of recycled materials Dimensions: - Measurements: Max (with 3 rolls to close): 6" wide at top, 2" wide at bottom, 5.5" deep, 20" tall - Capacity: 6 Liters max - Weight: 11 oz

The Rando Pocket is an accessory bag fit to carry a small repair kit, wallet, keys, a cell phone, or a small point-and-shoot camera. Designed as the perfect match for our most revered bicycle bags, the Rando Pocket attaches to our Kestrel Handlebar Bag, Ardea Pack, and Anchor Hip Pack, and mounts to the Wald 137 Front Basket to upgrade any kit. The Rando Pocket is made out of Challenge ECOPAK 100% recycled polyester and contains roughly 1 plastic bottle rescued from ocean beaches. Add versatility to your favorite set-up: The Rando Pocket weaves securely onto the Wald 137 Basket using standard MOLLE attachment and feeds onto our Kestrel Handlebar Bag, Anchor Hip Pack, and Ardea Pack to add space for your small belongings. The Rando Pocket is padded to protect your point-and-shoot camera and is the ideal pouch to keep repair supplies at arm's reach. Because the attachment mechanism is universal to the MOLLE system, our Rando Pocket is the perfect addition to any bag that features MOLLE webbing. Cool Features: - MOLLE attachment - Single-handed closure - Fully padded with closed-cell foam Attaches to the following bicycle bags: - Kestrel Handlebar Bag - Ardea Pack - Merlin Randonneur Bag - Anchor Hip Pack Dimensions: - Measurements: 5.25"h X 4"d - Capacity: .8L - Weight: 2oz Built with: - Recycled ECOPAK™ EPLX400 - Packcloth - Closed Cell Foam - Nylon Webbing

The Sidekick Stem Pouch is a bicycle bag that fits a water bottle, snacks, and is an ideal bag for your cell phone and essentials. Featuring two mounting systems, the Sidekick attaches to the bicycle stem and handlebars with the three included velcro straps, or piggy-backs to our Kestrel Handlebar Bag, Ardea Pack, and Anchor Hip Pack with MOLLE snap straps. Instantly level up your Wald front basket set-up by hitching on a Sidekick or two. The Sidekick Stem Pouch is made out of Challenge ECOPAK 100% recycled polyester and contains roughly 2 plastic bottles rescued from ocean beaches. Every superhero needs a sidekick. The Sidekick Stem Pouch attaches securely into the nook between your bicycle stem and handlebars. Nobody puts Baby in a corner. The Sidekick Stem Pouch doesn’t only nail it as a bicycle handlebar bag–it’s a winner added to your bikepacking and day-ride bags–our Sidekick features two MOLLE snap straps to allow you to add this clever cylinder to our most popular bike-camping and urban bicycle bags. Attach the Sidekick Stem Pouch to the Kestrel Handlebar Bag, Ardea Pack, and Anchor Hip Pack. Also Features: - Challenge Sailcloth recycled polyester bag cloth ripstop (450D) - Comes with 3 Omni Wrap velcro attachment straps vertical and horizontal daisy chains allow - Flexible attachment to handlebars and stem - Bottom drain hole MOLLE compatible nylon webbing snap straps - Attaches to the following bicycle bags: Kestrel Handlebar Bag, Ardea Pack, Merlin Randonneur Bag, Anchor Hip Pack Attaches and onto a Wald 137 Basket with the snap straps - Features Cyberian Cordlock one-handed open & close drawstring closure

The Sugarloaf Basket Bag is designed to fit perfectly into the classic Wald 137 basket. It is fastened in place at either side with a reliable and easy-to-use buckle. The Sugarloaf is an ideal companion for anything from daily commutes to overnight adventures or gravel expeditions. Add a Sidekick Stem Pouch or Rando Pocket to your basket for some extra organizational capacity. The Sugarloaf Basket Bag is made out of Challenge ECOPAK 100% recycled polyester and contains roughly 10 plastic bottles rescued from ocean beaches. Built With: - 400D Packcloth Lining - Closed-cell foam cushion base to protect valuables - Seat belt webbing handles - Handles secure with center-snap - Exterior forward-facing zipper entry pocket - Exterior Rider-facing magnetic closure organizer pocket - Secure fastex buckle easy-on/easy-off attachment to the basket - Interior pockets for additional organization - Reflective touches on attachment wings - D rings for shoulder strap compatibility - YKK water resist zip on the main compartment - Made in Seattle, WA out of recycled materials Dimensions: - Measurements: 14"w X 7h" X 7"d - Capacity: 11.5 L - Weight: 13.5 Oz - Looking for more capacity? Check out our 30L Motherloaf Basket Bag.

The Zeitgeist Pack is an excellent choice for gravel adventures, touring, bikepacking and everyday bicycle commuting. Our design puts 12L of carrying capacity right at the helm of your bicycle and features two handy side-pockets that collapse flat when not in use. The Zeitgeist Pack is made out of Challenge ECOPAK 100% recycled polyester and contains roughly 15 plastic bottles rescued from ocean beaches. Features: - Challenge Sailcloth recycled polyester bag cloth rip stop (450D) - Flap lined with TPU coated 70D nylon ripstop for excellent water resistance - 400 D Packcloth Lining throughout the body - HDPE insert in body to help shape and stabilize your load - Interior features one-handed drawcord closure with additional compression strap to compact your load. - Flap features webbing daisy chains and D rings for additional lash points - Reflective detailing - Side pockets collapse flat when not in use - Comes with foam spacers and 9" Swift Straps - Redwood EPLX400 interior cinch closure Features Cyberian Cordlock One handed Open & Close cinch. - Made in Surabaya, Indonesia out of recycled materials Dimensions: - Measurements: 18"w X 9"h X 7"d - Width of the Zeitgeist with pockets folded: 13" - Width of the Zeitgeist Pack with side pockets packed out: 19" - Capacity: 12 Liters - Weight: 1.3 lbs Measurements and Fit: - Without a rack: When packed to the gills and under-weight, the Zeitgeist Pack plays nice with bikes that have a minimum of 11" from the center of the handlebars/saddle loops to the top of the tire or fender. - With a rack: As little as 7.5" of clearance is required to run the Zeitgeist Pack on either a front rack or the rear

The Paloma Handlebar Bag is a classic bar bag design and mounts into the handlebars using the Rixen and Kaul Klickfix Adapter. A clear map case, and external pocket add utility to this elegant bag. Ideal for road rides, gravel roads, and touring. Not recommended for technical terrain. The Paloma Handlebar Bag puts everything you need within reach while you’re on the move, so you can go further, faster. No more stuffed jersey pockets, or repeatedly stopping to get things out of your saddle bag or panniers. The Paloma is available in XPac™? textiles, each developed for the durable needs of the sailing industry. Whether you’ve got the 1200km Paris-Brest-Paris route on the horizon, or are exploring the backroads of the high Cascades, our Paloma Bar Bag is here to chase the perfect ride. Cool Features: - Front pocket - 10 X 5 clear map case, touch-screen responsive - Dee rings for a shoulder strap - Interior pen pockets and phone or note pad slots Measurements: - 10w X 5.75d X 6.25h - Capacity: 6 L - Weight: 14 oz. - Klickfix Adapter weight limits: 15 lbs

Most of you don’t need the cargo capacity to land a helicopter on your rack. Sometimes, all you want to do is grab a sixer from the beer store on the way home or pick up a nice bouquet of flowers. For whatever the situation dictates, we offer the 8-Pack Rack. The 8-Pack Rack is a solid pedestal upon which you may rest a handlebar bag, grocery bag, minaudière, satchel…or whatever you use to carry your bowling ball around. The 8-Pack Rack attaches to most forks with mid-blade and crown eyelets. It uses stainless steel hardware (handily housed in a reusable Surly Tool Bag), and has the characteristic durability, versatility, and repairability all Surly products are known for. The 8-Pack Rack has lots of barrel braze-ons, so you can customize your cargo tie-downs…or just bolt on as many lights as you can. Rack Specifications: Color: Black or silver Weight Limit: 13.6kg (30lb) Finish: ED Coating + Powdercoat Rack Material: Tubular 4130 Chromoly Platform Dimensions: 270mm x 160mm

Surly Racks are well-thought-out, durable, expedition-worthy racks that work with most panniers. While their racks aren't limited solely to heavy duty touring, that is what they were designed for. When you're out on the road, the best option is to never ever have anything ever go wrong ever. Right? That's never a guarantee though; so having something that you can repair if it does break can be pretty clutch. Thus, the main bodies of Surly's front and rear racks are made from tubular CroMoly steel with stainless hardware. This means you can probably find someone out there that can torch it back into one piece in the rare instance things go south. The Front Rack is height adjustable and provides either a low or high pannier mounting position, which can be handy depending on terrain. When the ground gets rough, keep your gear high and dry. When the path is smooth and easy, you can load things low and keep everything balanced and stable, with the platform above the wheel providing yet more space for more stuff. It's worth mentioning they've redesigned the Front Rack hardware to be simpler to attach and more compatible with things like disc calipers and fenders. Surly also made attachment plates specifically for their Uni-Crown forks for yet more fork compatibility. This simpler design has fewer moving parts and costs less to manufacture; ergo, costs less for you to purchase. Surly's front rack WILL work with disc brakes on the Troll, Ogre, and Disc Trucker frames. It may take a bit of work to get clearance around the front caliper since the many different calipers out there are many different shapes. The new attachment plates will limit any DIY ingenuity you might need, but if you need to throw a washer or three behind the lower left bolt where the plate attaches to the fork dropout, that's not a big deal. As part of Surly's ongoing effort to make this planet last a little longer, they recently started shipping their racks with a small, reusable Surly Tool Bag that houses the rack struts and hardware. This switch helps eliminate the use of some polybags, thereby minimizing excess waste. Plus, you get a free tool bag out of the deal. Surly Front Rack will haul up to 32kg (70 lb) of well-secured, well-balanced gear over roadways and maintained off-road trails. Front Rack specifications: - Tubing diameter: 10mm - Platform dimensions: 230 x 170mm - Weight: 1382g

Surly's Junk Straps are basically really long toe straps. They're 120cm woven nylon with a stainless steel buckle. Surly had them made to specification to ensure that they work well and last a long time. They're easy to use and they stay tight. Once you're ready, loosening them is quick and easy. They're light, pack small, and securely and conveniently attach all kinds of stuff to your rack, basket, handlebar, backpack, under your seat, around your thigh…just about anyplace. You can combine them for even longer straps. - Pack of 6

The Moloko Adjunct Personal Effects Receptacle is made from urethane-coated nylon canvas and designed to fit in the center of the Surly Moloko Bar. It has space for essentials and can easily be accessed while riding. - Constructed from urethane-coated nylon canvas to provide water-resistant protection - Elastic cord on top snuggly secures extraneous loose items like wrappers or gloves - Integrated light port allows a battery cord to pass through - Dimensions: 254 x 90 x 90mm

Surly's burly line of tubular chromoly steel racks have been used on expeditions all over this planet for years. This Surly Rear Disc Rack is made of tubular chromoly steel and is specifically designed to fit frames with seat stay-mounted disc brakes like the Straggler (650B and 700c), Krampus, and Karate Monkey for the Standard model. The Wide model is specifically designed to fit fat bike frames with seat stay-mounted disc brakes like the Wednesday and Ice Cream Truck. - Tubular chromoly rack, stainless-steel hardware - Height-adjustable to accommodate 26-29" wheels - Hardware housed in reusable Surly Tool Bag

Dubbed 'Straggle-Check' frame bags, these bags are designed to fit both 700c and 650b Straggler and 700c Cross Check frames. Size up one size on your bag if you've got a 650b Straggler frame and voila, it fits. These are handmade by Revelate Designs in the U.S., made of Dimension Polyant VX 21 polyurethane coated fabric. It's durable, rip resistant, tightly woven and laminated to make it highly water resistant but not fully waterproof…. Revelate advises using stuff sacks inside (such as the one in which our bags are packaged) if you risk riding in extended downpours or underwater. Surly's Straggle-Check frame bags (as well as their mountain bags) are now using a ladder strap system, which allows greater flexibility in how you attach the bag to your frame. The ladder straps let you customize the fit and placement of the mounting straps so if you have some weird contraption clamped to your frame tubes like a chain keeper, cable pulley, or some trinket grandma gave you, it won't interfere with the mounting straps on the frame bag. They're also including foam bumpers for the mounting straps to minimize thread abrasion to the bag and attachment points Quality YKK brand water resistant zippers – with an improved, water resistant zipper 'garage' – control compartment access and help keep the weather out. Zippers are sewn with a stretch panel to relieve stress on the zipper as well. Stress even kills zippers. The large main compartment has a flexible divider inside, and there's a hydration port to make sure your whistle stays wet. There's also a compartment suitable for smaller items you'll access relatively often, like your map, phone, hard boiled eggs, uncontained pudding, marbles for playing marbles, your dugout, that ring you found that makes you disappear when you put it on, or whathaveyou. Frame bags such as this are light and reasonably voluminous. They are stable because they center weight low between your wheels and body, and they go places where racks and panniers are often troublesome, like singletrack. Note: due to the rough texture of the mounting straps, prolonged use may lead to scratched or worn paint. If you're worried about keeping everything looking pristine you probably ought to look for some other type of bag, or figure a way to protect the paint, such as duct tape, or tatting a top tube doily - for example.

From everyday use to light touring stints, the 'Half Moon' rack adds a dimension of capacity, functionality and style to your bicycle's front end. The front rack is often an underestimated accessory for the bicycle, but once it's attached, it lends itself to easy and convenient use in so many instances, that it becomes difficult to imagine being without it. Adding a pannier bag to the Half Moon- below it's top platform opens up an added realm of carrying capacity. The rack can be attached using fender mounting eyelets or cantilever brake pedestals in conjunction with a crown mounted "diving board". The legs of the rack are adjustable in height with SimWorks' original 'DenDen' bolt mechanism, allowing you to set the optimum angle and positioning of the rack for your bike. The updated version for Spring '22 features expanded tire capacity, slightly longer legs, and a brazed bar across the bottom of the rack to help secure a pannier clip After depositing your luggage on the half moon rack, whisper as usual ? If you feel the attraction of the half moon, you may be able to go farther ? Made by Nitto in Japan Specifications: - Material : 9mm CrMo Steel Tube - Weight : avg. 780g -Max Load : 12kg - Leg length : 340mm ~ 360mm / Geometry - Color : Chrome Plated & Black Notes: - Insert the leg adjuster DenDen bolt at least 15 mm. - Please refer to maximum load capacity. - Use with a basket etc. qualifies as modification and is not covered by the warranty. - Do not use with extended loading capacity. - In some instances, Half Moon can even be mounted on the rear end of a bike- given appropriate frame geometry and mounting points.

Our new rear bag support is a highly adaptable compact carrier produced by our partners at Nitto. Able to be mounted on a wide range of cycles, the Burrito rack is a suitable way to carry a compact load, whether as a support for a bag attached to your saddle, or as a standalone rack that a small bag, stuff sac, or sleep roll could be attached to. The rack's decking is constructed of tubular chromoly. The adjustable struts can be eyelet mounted or you can use the included band clamps to secure the rack to your bike's seat stays. A seatpost clamp provides the third necessary attachment point. Nitto recommends using the clamp with seatposts between 26.8mm and 27.2mm. This range could potentially be expanded to larger posts with longer hardware. Studs on the underside of the rack could serve as an anchor point for a strap or lashing. Fit, finish, and hardware are all classic Nitto top shelf specification. * Minimum clearance between top of rear tire and seatpost clamp position: 12cm Specifications: - Chromoly Construction - Trim to length aluminum struts - Stainless Hardware - Load Capacity: 10kg - Weight: 410g - Production: Nitto Japan - Finish option: Chrome / Black Plating

-This new 'Off The Road' rack is, so-to-speak, a wider and heavier-duty version of the 'On The Road' rack. It was developed for off-roaders who wish to load more and travel further. Fit is tailored through our clever 'Denden' bolt height adjustment for the rack 'limbs' and Daruma-secured connection rods. Fit and finish is sublimely Nitto- as always. -Your search has ended for a rear carrier to transport you further. Welded with the 'Off The Road' mentality of a sweeping elegant curve- it is a functional and ample solution for a cosmic navigation machine that seamlessly roams through our increasingly entropic world. -Material : 12mm CrMo Steel Tube Weight : ave.1.15kg Max Load : 16kg Required Bolt Inserts : 15mm Color : Chrome Plated & Black * 15mm minimum Denden insertion depth * Please follow load capacity for safe use

How to carry your luggage on a bike is always an ever evolving quest for solutions, but we thought it would be appropriate to design an easy-to-use tote bag that could do double-duty on and off the bike. Positioned as an evolution of the formidable GR LOADER, the WB is a tote style bag that fits perfectly in the ubiquitous and practical Wald 137 basket. The bag can be easily attached and detached with the stitched Velcro straps, so it can be used for riding while in the basket, as well as while off the bike. A perfect, stylish blend of utilitarian and versatility, the WB is perfect for commuting and attending school, making a run to the grocery store, stashing a change of clothes, and any other day-to-day activity that you can imagine. The fairly short tote straps keep the bag close to your torso when carrying off the bike. Made from cordura nylon with a good balance of ease of handling and durability, the entire bag is equipped with cushioning material, so it will protect the luggage inside if you encounter some variations in your road or trail. The roll-top shape, a structure that can flexibly cope with the capacity of luggage, and a ‘pig nose’ affords the option of attaching additional luggage to the bag- perfect for supplementing the capacity of the bag if using on basket-style bikepacking applications like carrying a mattress pad or sleeping roll. The possibilities are endless with the WB. Size: 32cm x 19.5cm x 34 cm Capacity: 21L Material: CORDURA® NYLON Origin: U.S.A, CALIFORNIA

Similar to the original MATTONE, a high friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the MATTONE will remain 'high and tight' under your saddle until you need to access it... no swinging, swaying, or rattling... ever

Named after the Italian word for Brick, Mattone is a water-resistant, ultra-compact seat bag that attaches to the rails using the BOA Closure System.  Unique zipper design allows it to be accessed while on the bike, or to open like a book when removed from the bike for easy access. Mattone is for the cyclist looking to carry a spare tube, CO2, multi-tool, and some cash in a discreet, water-resistant package. Internal divider holds ID, credit card, or cash while also protecting your tube from your multi-tool! Seat bag users fall into two categories: Seat Roll aficionados and seat bag users. Traditionally, seat bags have been simple open spaces that allowed content to jangle about, making noise and rubbing against each other. Often times a spare tube was pulled out of a seat bag to reveal it was more full of holes than the tube being replaced due to friction against a house key or multi-tool. With Mattone, we designed a layout similar to a book, where the bag can fully open to hold the tube and CO2 cartridge on one side, separated by a padded ballistic nylon 'page' separating it from the other side where you can store an inflator head, multi-tool, contact lens case, etc. The 'page' also contains a slot for a credit card, ID, money, or house key. The unique off-center Aquaguard Zipper allows the case to completely open and lay flat when off the bike, while also allowing easy access to the multi-tool and money/card slots when on the bike without risk of spilling all the contents of the bag. A high-friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the Mattone will remain 'high and tight' under your saddle until you need to access it...no swinging, swaying, or rattling...ever. - Exterior—Sleek black finish with reflective graphics - Interior—Hi-contrast red material with separate ID, credit card, or money flap - Interior Volume—Holds one inner tube, one CO2 cartridge, one tire lever (all of these components are sold separately and are not included) - BOA Closure System with open guide release on Hypalon retaining strap - YKK Aquaguard zipper - Outside Dimensions: 13cm x 8.5cm x 5.5cm - Volume: Approximately .61 L - Strap Measurements: 27cm x 4.5cm

Seat Roll Asymmetrico takes everything we've learned in 5 years of producing the award-winning Seat Roll Premio and kicks it up a notch with lighter materials, reduced bulk, improved abrasion resistance, an extra pocket, and a unique asymmetric design which allows you to pack more into a smaller volume, oh, and room for up to 700x45 (29x1.75") tubes! - 2-Ply Ballistic Nylon Construction with Hypalon outer jacket - Boa L6 Closure System with Lace Guide - Padded Rail Guard protects saddle rails and speeds Installation - FOUR internal pockets: Holds tubes up to 700x45mm - Black reflective printing provide stealthy HI-VIS in low-light conditions - Weight: 85 grams

The Alternator Rack 190 is the rear rack solution for all Salsa 190mm-spaced Alternator dropout equipped frames. Load up your panniers, get off the beaten track, and start exploring! - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular AL-6061-T6 construction - 135 x 325mm cupped deck - Extra-long struts for improved range of fit. Straight and shaped (kinked) struts included - Large pannier hook stops - Black powdercoat finish - 15kg maximum recommended load - Mounting kit included - 765g

Set out on an adventure with Salsa's Alternator Rear Rack. Built for 135mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.

Set out on an adventure with Salsa's Alternator Rack. Built for 170mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.

The Salsa EXP Series Anything Cage Bag is designed to hold your gear on the Salsa Anything Cage and Anything Cage HD mounting systems. This bag protects contents from the elements while keeping weight low to the ground. - Designed to fit Salsa Anything Cage and Anything Cage HD (sold separately) - Quick-release roll-top closure for easy accessibility - Two Hypalon daisy chains for multiple secure attachment points - Molded TPU base helps keep bag upright even when off the bike - Primary Material: 400D Nylon with TPU Base - Weight: 128g

The Salsa EXP Series Anything Cradle is a bracket-mount handlebar roll system that holds gear in front of your handlebars without kinking your cables. This modular system is designed around our EXP Series Top-Load Dry Bag, which maintains a fixed width for loading with ease, or you can use your own dry bag. The Anything Cradle allows you to distribute your gear evenly—an essential part of any well-balanced bikepacking setup. - Kit includes Anything Cradle, Top-Load Dry Bag, EXP Series Front Pouch, and two 30" Salsa EXP Series Rubber Straps - EXP Series Anything Cradle Top-Load Dry Bag is fixed-width for easy loading - Salsa EXP Series Rubber Straps are made of non-slip TPU to hold gear securely - Works with or without EXP Series Anything Cradle Front Pouch - Anything Cradle Dry Bags feature a welded seam construction with waterproof materials and hook-and-loop straps for easier installation - Anything Cradle Front Pouch uses water-resistant fabric with welded seams for weather protection - Anything Cradle Arms are compatible with 35.0mm handlebars or 31.8mm handlebars (with included shim) - Nylon 6/6 composite cradle, 6061 forged aluminum arms - Maximum load weight: 8 lbs. (3.6kg)

The EXP Series Frame pack creates storage capacity in the main triangle of your frame, keeping weight centered, and gear out of the way of off-road obstacles. It's built with extremely durable fabric and zippers, and the result will see you through many miles, and many adventures. This frame pack is designed to fit the Cutthroat frame perfectly. - Weather resistant with fully welded-in #10 YKK waterproof zippers - Internal hook and loop divider for separating gear and managing storage - D-ring to keep water bladder from compressing itself in the bottom of the bag - Exit port along downtube for use with water bladder or lights - Non-driveside flat pocket for storage of maps, tools, phones, wallet, etc. - 500D Nylon with TPU lamination and PU coating, 1000D Polyester with dual sided TPU lamination, #10 waterproof YKK Zippers, Duraflex Hardware - XL Weight: 360g; Volume: 6.1L - L Weight: 320g; Volume: 5.2L - M Weight: 300g; Volume: 4.5L - S Weight: 260g; Volume: 3.5L

The EXP Series Direct Mount Thumb Screws allow for quick and easy attachment of Salsa EXP Series Direct Mount Packs to bicycle frames equipped with direct-mount locations. - Can be installed and removed by hand or with allen key - Includes necessary 0.5 mm washers and 4 mm spacers - Sold in packages of two