Frame Bags

Need just a wee bit more carrying space on your bike? Look no further. The Jerrycan® is a slim, rear mounting bag ideal for a repair kit, lube or a tube -- leaving more space for essentials in a frame bag. The Jerrycan comes in two models: bent and regular. The bent style accommodates deeply slanted seat tubes, gusseted braces at the seat tube / top tube junction, or bikes with minimal exposed seat post. Regular is the go-to for most other bikes. Features - At two inches wide, the Jerrycan is narrow enough that your legs won’t hit it when pedaling - Plastic stiffened side panels prevent side bulging - Interior elastic holds a multi-tool - Rear daisy chain for adjustable height attachment - Grippy attachment to top tube - Plastic HDPE side panel inserts The Jerrycan is mount specific. If you have a minimum of 2 in / 51 mm total of spacers and headset stack under your stem you may be able to use it as a front top tube bag. Specs - Weight: 2.6 oz / 74 g - Volume: 35 in³ / .6 L - Materials: Dimension Polyant VX-21 with abrasion resistant finish; 1050 denier domestic ballistics nylon; yellow lining and closed cell foam padding; #5 YKK water resistant zipper. - Imported.

The Mag-Tank takes a new twist on top tube bags. Instead of a zippered opening, access to the bag is by a smartly contoured top flap held in place by a magnetic buckle with mechanical engagement (read - the magnet aids in closure, while load is placed on a connection). It will not unintentionally open and spill your gummy bears when you end up in the trees with your bike upside down like a conventional magnetic closure would. You can easily open the bag one handed by pulling outward on the cord loop and you have access to the whole top of the bag. To close, just flick the flap down and the buckle self-engages! The Mag-Tank is just a hair smaller than Revelate's Gas Tank to prevent leg movement from hitting the edge of the flap opening. Please note - while the cover to this bag is designed to shed rain and spray, due to the large panel opening it is not a sealed bag or waterproof bag. Features: - One-handed access while riding - Side panels stiffened with HDPE plastic sheets - Wrap around panel is padded with closed-cell foam - Interior lined with yellow fabric for greater visibility - Adjustable height daisy chain front attachment with a spacer block to clear stem clamp bolts - Beefy top tube strap has gripper material with double back wrap for bomber stability - Made in the USA with domestic and imported materials. Sizing: - Length: 8.5" - Max height: 5" - Width at stem: 2.5" - Tapers down to 2.5" tall and 1.5" wide along the top tube Specifications: - Weight: 4.5 oz. - Volume: Approximately 65 cubic inches - Materials: VX21 & 42 XPac, 420-denier yellow and red lining, closed-cell foam-padded tube sections, HDPE sheets

The Rifter is a full frame bag ready for any adventure you throw at it. Made for modern bike geometry and with an optimized fit for carbon and long reach bikes, the four sizes fit tons of frames. A full length left side pocket provides extra space for items you want to be able to reach quickly. The main compartment features a vertical divider and an internal mesh pocket. A flared front provides additional volume and beefy zippers with stretch panels mean you can pack the Rifter full to the brim. Plus, it’s built with 100% recycled content fabrics. Features - Optimized fit for carbon and long reach bikes - Zipstretch ™ construction - Pairs a bomber, wetsuit style molded-tooth zipper with our exclusive stretch Cordura panels that reduce zipper stress when closing bag - Industry leading #10 molded tooth zippers with urethane coated tape are basically impervious to dirt and grit that destroy more commonly used water resistant coil zippers - Constructed using RVX30 with a woven backer - a 100% post-consumer recycled polyester face fabric, all domestically sourced here in the USA. The fabric is also certified climate neutral. - Full length left side pocket - Vertical divider and internal mesh pocket - Exit port in main compartment for hydration tube or wires - Expanding taper front section for increased volume at head tube - Adjustable strap daisy chain strap positioning - Front top tube attachments accommodate top tube packs - Built with 100% recycled content fabrics - Made in the USA with domestic and imported materials - Four sizes fit tons of frames Specifications Weight: - SM: 9 oz / 254 g - MD: 10.6 oz / 301g - LG: 11.5 oz / 325 g - XL: 12.2 oz / 347 g Volume: - SM: 366 in³ / 6 L - MD: 445 in³ / 7.3 L - LG: 525 in³ / 8.6 L - XL: 610 in³ / 10 L

If miles upon miles of open dirt roads are your calling, the Ripio® frame bag will haul your stuff. The Ripio is the full-frame solution for your road, gravel or touring bike. With geometry optimized for frames with tall top tubes & head tubes, the Ripio fits a huge range of bikes and is packed with features that make use of the larger frame space road geometry provides. Features - Zipstretch ™ construction - Pairs a bomber, wetsuit style molded-tooth zipper with our exclusive stretch Cordura panels that reduce zipper stress when closing bag - Fully recycled ECO-PAK fabrics both interior and out. - C0 CFC free DWR. - Cire exterior finish on main panels have 2x as abrasion resistant than other common laminates. - Industry leading #10 molded tooth zippers with urethane coated tape are basically impervious to dirt and grit that destroy more commonly used water resistant coil zippers - Exit port in main compartment for hydration tube or wires - Zippered left side pocket with dividers that organizes small items - Lower zippered compartment with horizontal divider that opens to create one large compartment - Additional vertical divider in top section of LG & XL sizes to avoid leg interference - Urethane coated webbing for easy cleaning, movable velcro one-wrap attachments for frame fitting - Front top tube attachments accommodate top tube packs Made in the USA with domestic and imported materials Specifications Weight: - SM: 8 oz / 227 g - MD: 14 oz / 397 g - LG: 16 oz / 454 g - XL: 17.4 oz / 493 g Volume: - SM: 305 in³ / 5 L - MD: 385 in³ / 6.3 L - LG: 470 in³ / 7.7 L - XL: 550 in³ / 9 L Materials: - Dimension Polyant VX-21 with abrasion resistant finish; TPU laminated stretch woven Cordura; 1050 denier domestic ballistics nylon; 420 denier diamond ripstop lining with full perimeter foam padded tube sections.

The legendary Tangle® is the original half frame bag. It offers substantial cargo capacity in a sleek, rectangular shape that fills unused space on your bike. Stash your food, tools, and a mini pump and you're ready for any adventure, big or small. Build quality is second to none, we've obsessed and honed the details for a bag you can rely on for years. Tangles are great places to store extra water and calories on longer rides. They can usually be run on a bike while keeping access to both water bottle cages (use side entry cages). Features - Zipstretch™ construction - Pairs a bomber, wetsuit style molded-tooth zipper with our exclusive stretch Cordura panels that reduce zipper stress when closing bag - Cire finished side panels that are two times as abrasion resistant as standard X-Pac materials - Industry leading #8 molded tooth zippers with urethane coated tape are basically impervious to dirt and grit that destroy more commonly used water resistant coil zippers - Exit port in main compartment for hydration tube or wires - Zippered left side pocket with dividers organizes small items Urethane coated webbing attachments don’t absorb water or grit - Daisy chain front top tube attachment accommodates any top tube bag configuration - Padded with closed cell foam along all tube sections - Internal pump straps along top tube - Low-profile cam-lock buckles - Made in the USA with domestic and imported materials Specifications Weight: - XS: 7.9 oz / 224 g - SM: 8.3 oz / 235 g - MD: 8.8 oz / 249 g - LG: 11.9 oz / 337 g Volume: - XS: 186 in³ / 3 L - SM: 214 in³ / 3.5 L - MD: 244 in³ / 4 L - LG: 366 in³ / 6 L Materials: - Dimension Polyant VX-21 with abrasion resistant finish; 1050 denier domestic ballistics nylon; 420 denier diamond ripstop lining; closed cell foam padded tube sections.

This carbon Mukluk specific frame bag incorporates the best features of our classic Ranger frame bag. This frame bag is for the 2017-2021 year models of the Salsa carbon Mukluk. Your frame size correlates to the frame bag size; a small fits a small carbon Mukluk. If you have an aluminum Mukluk, we recommend the Ranger. Features: - Revelate exclusive RevX-PAC panels that are 2 times as abrasion resistant as standard VX material. - Zipstretch construction pairs a bomber, wetsuit style molded-tooth zipper with our exclusive stretch Cordura panels that reduce zipper stress when closing bag. - Industry leading #10 Molded tooth zippers with urethane coated tape are basically impervious to dirt and grit that destroy more commonly used water resistant coil zippers. - Exit port in main compartment for hydration tube or wires. - Zippered left side pocket on sizes SM-XL. - Bags feature one main compartment with vertical divider. - Expanding taper front section for increased volume at head tube. - Stretch mesh internal pocket. - Front top tube attachments accommodate top tube packs. Weight: - SM: 11 oz - MD: 12 oz - LG: 13 oz - XL: 15 oz Materials: - RevX-Pac Fabric: Dimension Polyant VX-21 with proprietary abrasion resistant finish; 1050 denier domestic ballistics nylon; 420 denier diamond ripstop lining; closed cell foam padded tube sections. Made in the USA with domestic and imported materials. These frame bags are manufactured and distributed by Revelate Designs and have no affiliation with Salsa Cycles. Salsa Cycles is a trademark of Quality Bicycle Products.