Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Parts & Accessories
$219.00
Meet the new fail-safe for your tailgate, featuring padded protection for your most prized possession. With durable PVC tarpaulin and a micro-brushed inner lining, the FOX Overland pad is designed to keep your truck and bikes clean and secure.
- Raised bumpers (reinforced with high-density foam) keep down tubes secured in place to minimize frame contact
- Each pad comes with two strap extenders for eMTBs
- Fully adjustable rear opening to maintain function of your backup camera and keep your tailgate handle accessible at all times
- Durable PVC tarpaulin on the outside and a micro-brushed inner lining ensure your tailgate is protected from cosmetic damage
- Every size of Overland features cinch straps to adjust the exact height and width of your truck’s tailgate
- Full-size (up to 6 bikes) - for Full Size Trucks (F-150 to F-350, 1500 - 3500 series, Tundra and Titan)
$209.00
Meet the new fail-safe for your tailgate, featuring padded protection for your most prized possession. With durable PVC tarpaulin and a micro-brushed inner lining, the FOX Overland pad is designed to keep your truck and bikes clean and secure.
- Raised bumpers (reinforced with high-density foam) keep down tubes secured in place to minimize frame contact
- Each pad comes with two strap extenders for eMTBs
- Fully adjustable rear opening to maintain function of your backup camera and keep your tailgate handle accessible at all times
- Durable PVC tarpaulin on the outside and a micro-brushed inner lining ensure your tailgate is protected from cosmetic damage
- Every size of Overland features cinch straps to adjust the exact height and width of your truck’s tailgate
$179.99
The Benno High Rail rack add-on extends the usefulness of the Utility Rack to provide additional stability for bulkier loads or older children.
- Make sure that no parts of the body or clothing come near moving parts on the bicycle, such as chain, spokes, tires or brakes.
Compatible with:
- Categories: Boost EVO 5, Boost EVO 4
- ONLY for Boost EVO 4 and later!
$174.99
The Benno High Rail rack add on extends the usefulness of the Utility Rack to provide additional stability for bulkier loads or older children.
- Make sure that no parts of the body or clothing come near moving parts on the bicycle, such as chain, spokes, tires or brakes
Compatible with:
- Categories: Boost EVO 3, Boost EVO 2, Boost EVO 1, Carry On
- NOT compatible with Boost EVO 4 and later!
$149.99
Rear rack attachment for the RemiDemi that provides a larger cargo platform and mounting points for panniers designed to fit racks with 19mm tubing. The Jump Seat also features a grab handle that is perfect for a passenger when paired with the RemiDemi Jump Seat Pad. Compatible with a single Yepp EasyFit child seat.
$109.99 - $119.99
The Benno Half Rail Plus attaches to the platform rack providing stability for rack passengers. The half rail design provides easier access for ingress and egress.
Make sure that no parts of the body or clothing come near moving parts on the bicycle, such as chain, spokes, tires or brakes.
$119.99
The Benno Platform Rail Plus affixes to the Utility Rack to provide additional stability for bulkier loads, extending the rack plaform area to 55cm x 72cm.
$115.00
Three Quarter Rail Plus - Boost EVO 4,5,6, RemiDemi XL
- Requires A0006 Clamp Set
$109.99
The Benno Platform Rail plus affixes to the Utility Rack to provide additional stability for bulkier loads, extending the rack platform area to 55cm x 72cm.
$85.00
What should you do with all those small, but important extras on your bikepacking tour? The best place to put your snacks, smartphone, rain slicker, and other items is in your ORTLIEB Accessory-Pack. This convenient volume expander for your Handlebar-Pack keeps your things secure, absolutely waterproof, and quickly accessible at all times.
Use the metal hooks to securely attach the Accessory-Pack to the four points of attachment on the Handlebar-Pack. And if you don't plan on spending the night outdoors and don't need your Handlebar-Pack, you can still use your Accessory-Pack as a handlebar bag thanks to its pre-mounted Velcro straps. You can even use the carrying strap to transform the lightweight bag into a shoulder or hip bag.
$70.00
Surly's Dummy Deck provides a light, durable platform for cargo bikes, built to Xtracycle's Longtail standard — including the Big Dummy, of course. The Dummy Deck is stamped from 4mm-thick aluminum, chosen for its strength, durability, and recyclability, and it bolts directly to Surly Dummy Rails to stiffen and stabilize the whole system (it's also compatible with Xtracycle V-racks by using Xtracycle's SuperHooks). It features cut-outs for routing straps and cordage, a mounting hole for a rear light bracket, accessory-mounting holes, and countersunk holes for SuperHook hardware.
$70.00
Dummy Rails support Dummy Bags on your Big Dummy cargo bike, and Surly's Dummy Deck bolts directly to them, stiffening the whole system for a more stable load. Dummy Rails are made of light, strong aluminum and were designed in conjunction with the Dummy Deck and Dummy Bags; each component works best when used with the others. Like all Surly products, they've built in lots of useful details. For example, the deck-attachment bosses stick up from the rails to create space between the deck and rails, providing windows to route tie-down straps and cordage; and threaded bottle cage bosses located at the rear of each rail provide mounting locations for accessories: bottle cages of course, or lights, cameras, pumps, flags, horns, light saber scabbards, disco balls, spittoons, cornucopias, etc. Dummy Rails will work with cargo frames (including the Surly Big Dummy) built around Xtracycle's longtail standards.
$64.99
Benno Boost Tank plate provides perfect location for custom graphics or business logo. Compatible with the Boost EVO 4 which can be identified by having a battery behind the seat tube.
- Directly bolts to frame mounts
- Compatible only with Boost Evo 4 and newer
$63.00
Benno Wheel Guards prevent cargo, and passenger body and clothing from becoming entangled the spinning wheel and spokes.
$60.00
Old Man Mountain Axle Pack is unlike any fork mount adapter you’ve seen. Rather than trying to clamp to round or tapered surfaces and just hope it doesn’t slip or spin, Axle Pack is thru-axle mounted, making it impossible to slip or spin. Axle Pack is designed to be mounted to Old Man Mountain Thru Axle Fit Kits. With 3-pack mounts on the uprights you can carry bottles, fuel, stuff sacks, dry bags, bolt-on bags, and more. With four mounting points you can also choose to run your gear higher or lower depending on your needs.
- Provides 3-pack mounts on any thru-axle fork
- Axle Pack is rated to 10kg per pair
- Four mounting points you can also choose to run your gear higher or lower depending on your needs
$60.00
The Salsa EXP Series 35.0 Anything Cradle Arms are for mounting the Salsa EXP Series Anything Cradle (sold separately) to handlebars with a 35.0mm or 31.8mm clamp diameter.
- Compatible with 35.0mm bars or 31.8mm bars (with included shims)
- Compatible with all Salsa EXP Series Anything Cradles
- Hinged clamps allow for easy installation and removal from handlebars
- Made of 6061 forged aluminum
$56.00
In 2019 the CargoMount™ Classic created a new class of single piece aluminum cargo cages. The CargoMount™ builds on this design by utilizing an internally threaded tube to create a strong, low-profile, and removable load support.
Securely strap down a variety of bottles, smaller bags, and cylindrical objects to your bike frame or fork.
Constructed from durable and lightweight 5052 aluminum, this cargo cage comes in anodized finishes of Black, Silver, Purple, and Orange. The regular size weighs only 78g with the load support, while the Mega version weighs 98g, making it one of the lightest cargo cages available.
Attach your CargoMount to three-bolt mounting systems using our unique slot configuration, which allows fine tuning at multiple positions on frames and forks. For more information on installation and use, see Description below, and Voile Straps page.
$55.00
If you use an ORTLIEB Back-Roller, Bike-Packer, or Velo-Shopper for your ride to work, you may want to consider the advantages of the Commuter Insert. You pack the Commuter Insert at home – with your laptop, lunchbox, documents, water bottle, pens, smartphone, change of shoes, etc. – and then simply insert it into your pannier. The advantage is that everything stays well-organized, nothing goes mysteriously missing and nothing hides in the depths of your bag. And so you save time and avoid those nervous moments of uncertainty. While the Commuter Insert is ideal for commuters, it can also be a faithful companion to anyone who transports gear from any point A to any point B.
The Commuter Insert is made of lightweight, durable nylon fabric. A padded compartment for your laptop or tablet is located directly under the handle. There is a separate pen compartment and two compartments for your smartphone and money, including an integrated key chain. The large inside compartment offers plenty of space for provisions and a change of clothes.
FEATURES:
- Stable and tip-resistant even when empty
- Two side mounts for water bottles, etc.
- Flat mesh pocket (ideal for a bike lock)
- Foam padding on the sides and bottom
- Ideal for use with all ORTLIEB Back-Rollers, Bike-Packers and Velo-Shoppers
- Permits access to the inside pocket of your bike pannier
$55.00
The name of the game is finding instead of searching. The Packing Cubes save you a lot of time and frustration when it comes to packing for your bike tour. The Cubes offer an ideally organized space for your clothing, tools, toiletries, and other gear. The system was specially designed for those mission-critical little things that often slip down into the depths of your panniers or otherwise defy your earnest search efforts. The inserts also help you to keep clean and soiled things separate. The three inserts (two 6-liter units and one 5-liter unit) can be perfectly stacked in ORTLIEB Back-Rollers, Velo-Shoppers, and Bike-Packers.
The durable, lightweight nylon material was specially developed to ensure a long service life. All of the Cubes are outfitted with a practical 2-way zipper to ensure easy access to their contents. Outfitted with top handles, the inserts are easy to remove from your panniers.
Each Cube has additional inside and outside mesh pockets for stowing those very small objects you would like to have within reach.
Given their modular design, the bags can also be used individually when you're out on short trips.
FEATURES:
- Each unit in the modular system can also be used individually
- Volume of organizers: top and middle bag: each 6 L, lower bag: 5 L
- Suitable as an insert for all ORTLIEB Back-Rollers, Bike-Packers and Velo-Shoppers
$55.00
The Rando Pocket is an accessory bag fit to carry a small repair kit, wallet, keys, a cell phone, or a small point-and-shoot camera. Designed as the perfect match for our most revered bicycle bags, the Rando Pocket attaches to our Kestrel Handlebar Bag, Ardea Pack, and Anchor Hip Pack, and mounts to the Wald 137 Front Basket to upgrade any kit.
The Rando Pocket is made out of Challenge ECOPAK 100% recycled polyester and contains roughly 1 plastic bottle rescued from ocean beaches.
Add versatility to your favorite set-up: The Rando Pocket weaves securely onto the Wald 137 Basket using standard MOLLE attachment and feeds onto our Kestrel Handlebar Bag, Anchor Hip Pack, and Ardea Pack to add space for your small belongings. The Rando Pocket is padded to protect your point-and-shoot camera and is the ideal pouch to keep repair supplies at arm's reach. Because the attachment mechanism is universal to the MOLLE system, our Rando Pocket is the perfect addition to any bag that features MOLLE webbing.
Cool Features:
- MOLLE attachment
- Single-handed closure
- Fully padded with closed-cell foam
Attaches to the following bicycle bags:
- Kestrel Handlebar Bag
- Ardea Pack
- Merlin Randonneur Bag
- Anchor Hip Pack
Dimensions:
- Measurements: 5.25"h X 4"d
- Capacity: .8L
- Weight: 2oz
Built with:
- Recycled ECOPAK™ EPLX400
- Packcloth
- Closed Cell Foam
- Nylon Webbing
$54.99
Benno Rail Clamps are required to attach the Benno High, Half and Platform rails to the Utility Rack.
- For Boost E 2020 and newer
$54.99
Benno Rail Clamps are required to attach the Benno High, Half and Platform rails to the Utility Rack.
- For Boost E 2020 and newer
$50.00
The Proviz REFLECT360 pannier cover is adjustable and designed to fit over all standard size panniers (up to 25L capacity).
The Proviz REFLECT360 pannier cover, like the whole of the REFLECT360 range, is manufactured from CE EN 20471 certified material. The pannier cover is dual-layered to give you unparalleled water-resistance and is made from 100% reflective material to help your position be more easily identified on the road.
The Proviz REFLECT360 pannier cover is attached securely using elasticized cords and press-stud fasteners. The edges of the cover are elasticized to create a secure fit around your pannier. A light loop can also be used for those wishing to attach an extra LED light.
About the fabric: The fabric used for the REFLECT360 range is highly technical. During daylight, it is a modest grey color. At night, when the fabric picks up an external light source, e.g. vehicle headlights, it gives "astonishing reflectivity" (quote: Cycling Active Magazine Sep:2014). The material is CE EN 20471 certified.
- Made from 100% reflective material—CE EN 20471 certified
- Dual-layer 100% waterproofing
- Easily fitted to most panniers up to 25L in size
- Elasticized edge, straps, and press-stud fasteners
- Light loop (to add LED light)
$49.99
This rain-resistant cover for the Travoy pulls over and around your cargo, securing to the trailer frame. When not in use, it packs inside a convenient storage sack with a zippered pocket that remains attached to the frame ready for easy deployment when wet weather hits.
Features:
- Coated 70D nylon fabric keeps cargo dry
- High viz fabric with reflective detail to keep you safe while you ride
- Draw string tensions fabric around cargo
- Center strap with buckle wraps around back for a secure fit
- Velcro frame mount for cover storage sack
- Compatibility: 2010 – Current Travoy
- Weight (lbs/kg): 0.31 / 0.14
$45.00
The seat rail mounted compontent of the Spinelock stability system. Sold individually as a spare or replacement. Having a second can be handy if you use your Spinelock seat bag on multiple seats or bikes.
A Torx-25 wrench is needed for installation. you likely already have one on your multi-tool!
Important information on use and fit:
- Not compatible with carbon fiber saddle rails
- Only compatible with traditional style saddle rails and is not compatible with most models of Brooks saddles including (B17, B66, B67, Flyer, and similar).
- This product is not designed for use with dropper seatposts.
- A Torx-25 wrench is needed for installation. You likely already have one on your multi-tool.
Materials: Forged aluminum.
$44.99
The MIK Carrier Plate is ideal for cyclists who are looking to upgrade their frame to accommodate the MIK system. This carrier plate allows you to attach any accessory fitted with an MIK adapter to your luggage carrier in as little as one second. You’ve a wide range of accessories to consider, including panniers and baskets with ample storage. Once fitted with MIK system components, it’s as simple as clicking your preferred storage item or accessory into place.
Please note, bikes already fitted with integrated MIK systems including carrier plate needn’t worry about upgrading their bicycle with this accessory. This MIK Carrier Plate is suitable for luggage racks with a width of 100-170mm.
Features:
- The MIK Carrier Plate is suitable for bicycle baskets and panniers from Basil.
- Attach at the rear luggage carrier of conventional and electric bike frames.
- The MIK Carrier Plate is designed for use with accessories that have been fitted with MIK Adapter Plates.
$40.00
Surly's Junk Straps are basically really long toe straps. They're 120cm woven nylon with a stainless steel buckle. Surly had them made to specification to ensure that they work well and last a long time. They're easy to use and they stay tight. Once you're ready, loosening them is quick and easy. They're light, pack small, and securely and conveniently attach all kinds of stuff to your rack, basket, handlebar, backpack, under your seat, around your thigh…just about anyplace. You can combine them for even longer straps.
- Pack of 6
$40.00
The EVOC FRAME PAD protects the bike frame from scratches and other transport damage.
- Fits most bike frames
- Attachment for handlebar
- Velcro straps attachment
$39.99
- The Basil Buddy Space Frame can be used in combination with the Basil Buddy Dog Bicycle Basket.
- This wire dome is made from hard-wearing steel and prevents your dog from jumping free of their basket while you’re out riding.
- This wire dome comes in classic black.
- Provides complete protection for your dog and total peace of mind for pet owners when out cycling.
$39.99
- Interface plates for luggage carrier rack to convert any non MIK ready carrier & non MIK ready bicycle bag to a MIK system (for use with Basil bags only)
- Compatible with luggage carriers from 80 up to 150 mm
- Carrier plate for rear racks that are not MIK ready.
- Adapter plate for bicycle rear bags that are not MIK ready
- Suitable for e-bikes
- Max load: 26lbs/12kg
$39.95
The B-RAD pump bag protects your frame pump from water and dirt ensuring it is working when you need it.
- Mounts to the B-RAD system or on its own
- Dimensions: 12 in x 2.5 in x 2.5 in (30 cm x 6.5 cm x 6.5 cm)
$37.95
Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options.
- Fits tubes 20-60mm.
- Engineering grade polymer
- 64 mm mounting height adjustable
- Weight: 128g
- Max load: 3kg / 6.61lb
- Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches
$35.00
Many e-bike owners are well-acquainted with this problem: bags and baskets that can't be attached to the handlebar because the e-bike display is in the middle of the handlebar. The ORTLIEB E-Bike Mounting Set comes to your assistance without forcing you to relocate the display. The lockable adapter is mounted to the handlebars with the proven cable fastener. This gives you a theft-proof way of attaching your ORTLIEB handlebar bags and baskets despite the display. The fastener is made for attachments of up to 5 kg.
- suitable for all handlebar diameters up to 35 mm
- duplicate set of keys
- mount compatible with products by Rixen&Kaul (KLICKfix System)
- bags can be locked to the handlebar with the integrated lock
- additional safety in traffic thanks to the reflective material on the mount block
$35.00
Ortlieb's Ultimate6 Mounting Set uses an integrated lock to secure your Ultimate6 bag (sold separately) to your bars. Additionally, the lid of the Classic, Plus and Pro models can also be locked. Whether you need one to mount the bag on a different bike or simply want spare parts for a long tour, the mounting set is an indispensable part of the Ultimate6 system.
$34.99
Minoura Smart Phone handlebar mounted holder.
- Adaptable with iPhone 6 plus
- Universal and adjustable fit with a recommended phone dimension of 55-85mm wide and 6-18mm thickness
- Pushing the ratchet wings grips the phone tightly and to release the phone, just pull the small red lever underneath the body
- Front and rear holders secure the phone and keeps steady even while going downhill
- Fully adjustable height and ability to increase width with two types of nail wings included
- hone angle can be angled 90 degrees without any tools
$33.50
Surly's Dummy Rail Collars are nothing more than a simple clamping device that buttresses the connection between your Big Dummy Frame and the Dummy Rails. They increase the stiffness of the interface of these two parts and help keep your cargo from getting its salad tossed… unless of course your Dummy Bags are filled with tossed salad. These are designed specifically for use with the Big Dummy frame and Dummy rails, and will not work with Xtracycle rails.
WARNING: Properly installed Dummy Rail Collars are required for carrying live cargo on your Big Dummy.
$29.95
The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options.
- Mounts to bottle bosses, or to the B-Rad base for additional carrying options
- Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches)
- Cradle strap is 40mm wide and 350mm long for supporting loads
$28.00 - $29.00
Weatherproof cell pocket that’s designed to work with all Mission Workshop Rucksacks, Arkiv Packs, Cargo bags, and Barrel Duffles.
Small size fits standard size phones such as the iPhone 7.
Large size can fit most plus size phones such as the iPhone 7+ (with case).
$29.00
This Tubus dropout extension adapter allows you to mount racks further back on the frame. It also allows you to mount traditional racks on bikes with disc brakes.
- Weight: 66g
- NOTE: This item is not compatible with any “EVO” Tubus racks
$28.00
All the hardware for the lower portion of your Surly rear rack. Stainless steel.
$26.99
The Lizard Skins Utility Strap is an easy way to stow essential tools and a spare tube. The minimally designed Utility Strap is a lightweight on-bike storage solution for any rider. This versatile system is made to securely attach under seats and other locations on bike frames. The Utility Strap has a wide strap and durable metal buckle.
- On-bike storage solution
- Inner sleeve to compress the tube
- Multiple spots for tools: CO2, Tire Lever, Multi-tool, etc.
- Wide strap and durable metal buckle
- Silicone and rubber grip for stability
- Compact and lightweight
- Attach under the seat or other locations on the bike frame
- Weight 4oz
$26.99
Adapter plate: To fix your Fork-Pack easily and securely on a wheel, there is the QLS Mounting-Set (Quick-Lock S System).
Not suitable for mounting on carbon forks without braze-on socket (thread) or conical tubes.
CONTENT:
- 1x adapter plate incl. mounting accessories and screws, black
$26.95
Topeak's front basket handlebar fixer fits standard bikes or eBikes with display units.
- Fits up to 1-inch handlebars
$25.00
LM-BF 35 Fork Adapter, for forks without eyelets. Use with rigid forks* with a diameter from 25mm up to 40mm. For all Tubus lowriders except for Duo.
*Please Note: Do NOT mount on suspension forks!
$24.99
Benno Rack Pads affix to the Utility rack models with hook and loop fasteners creating a seating platform for passengers.
- Use only with Benno High, or Half Rails, Wheel Guards.
- Make sure that no parts of the body or clothing come near moving parts on the bicycle, such as chain, spokes, tires or brakes
$24.95
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
$24.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes.
- Long, four-slotted mount allows two, smaller bottles to be mounted in-line
- Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts
$24.95
B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back.
- Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames)
- 6061-T6 aluminum brackets, stainless hardware
- Weight (no hardware) – 20g
- Maximum load 1700g
- Designed to carry two bottles or accessories off of one B-RAD base
$24.95
B-RAD Half Bottle Mounts allow for cargo customization and cargo optimization. Designed to work in tandem with B-RAD Base, the Half-Bottle Adaptor moves the bottle over about half a bottle radius to make it easier to access. The Accessory strap mounts can be mounted to the other side providing a mounting point for additional items.
- Mounts to the B-Rad base mount (not included
$22.95
Fast and easy attachment of Topeak handlebar bags.
- Clamp: Fits 25.4/28.6/31.8 mm Handlebars (shims included)
Page 1 of 3
Next page