Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Tools/Maintenance

$15.00
Maxima Serene Seat Post Fluid, for use in servicing Reverb Seat Post. - Not for use in Remote
$53.00
- 200 hour / 1 year service kit for Super Deluxe RT3 A1 rear shocks - Includes air can seals, piston seal, glide rings, IFP seals, reservoir seals
$9.00
This is RockShox's recommended cleaner for suspension internals. Handy aerosol spray degreases and conditions small parts like O-rings and seals. - Formulated with special conditioners that will not cause O-rings and seals to dry, crack, or degrade - For use on all suspension products
$5.00 - $38.00
RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.
$8.00 - $22.00
Rock-N-Roll Gold lubricant is for both mountain and road bike use. The formulation goes deep down into the chain and traps any dirt. Then, with the energy of the chain freewheeling backwards, the dirt and grit floats to the surface so you can wipe it all off, leaving a new and clean application of lube inside the chain, where it's needed. - All-purpose lube - Cleans and lubricates simultaneously
$5.95
Ritchey Liquid Torque is an essential weapon for anyone assembling, maintaining, or repairing a bicycle. Liquid Torque creates extra friction between two surfaces, allowing tightening torque to be reduced by up to 30%. Less tension on sensitive parts of your bike, like carbon fiber bits, means longer product life and more reliability. - Particularly useful when over-clamping can damage sensitive components such as carbon bars or steerer tubes - Approved for use with carbon, steel, alloy, and titanium surfaces - Use with Ritchey Torqkey to ensure safe installation of Ritchey bars and stems
$22.95
The smartest, most convenient torque key now comes with enough bits to suit every need. Make sure those stem bolts are tight enough, and double check the torque on the seatpost bolt while you're at it. The Ritchey Bicycle Torque Key is an essential tool for those important bolts. Available with 4 or 5Nm options, this 6-bit set includes just about every bit you'll need for your bike, and a convenient holder to keep it all organized. - Hex 3/4/5mm - Torx T-20/25 - Phillips #1 - 4 or 5Nm max torque - Bit holder included
$6.99
- 8mm to 16mm hex wrench adapter for removal of spindle from Cinch non-drive crank arm
$14.99
Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head. • Presta valve • 90 degree inflator works with most pump heads
$13.00
Ultimate protection and durability for components that have movement with metal to metal contact. - Produced by the same independent California refinery since 1971
$15.00
- Precision laser-cut tool steel. - Features 7mm & 8mm flare wrenches plus rotor truing slot. Driven by a request from mechanics in the pits every day, and sure to become a favorite, the Disc Wrench features 7mm and 8mm flare style box wrenches needed for the delicate hose fittings found on hydraulic disc brakes. The compact wrench also features a disc rotor truing slot and is made from precision laser cut tool steel.
$21.99
- Perfect companion for your Pedro's torque wrench - Bits made from premium S2 tool steel to ensure strength and lasting performance - Includes 16 hex and torx bits and 2 drive adapters in convenient holders - 50mm length bits in key sizes ensure component compatibility Pedro's Hex Bit Set II is designed to work with our torque wrenches offering an extensive range to handle most hex and torx needs. The set includes longer 50mm bits in key sizes to ensure compatibility and fit with all components where standard 25mm bits fall short. Bits are made from premium S2 tool steel for strength and lasting performance. Set includes: - Hex: 2, 2.5, 3, 4, 5, 6, & 8mm (25mm), 4 & 5mm (50mm) - Torx: T10, T15, T20, T25, & T30 (25mm), T25 & T30 (50mm) - Drive Adapters: 1/4-inch square to 1/4-inch hex & 1/4-inch hex to 1/4-inch square
$16.00 - $18.49
- New extra-long 27cm hex key and second ball-end deliver leverage and speed - Specifically designed for quick and easy installation and removal of pedals and cranks - Ergonomic dual-density screw driver handle - Designed to stand up to the harsh conditions of professional use Pedals featuring a back-side hexagon broach are now standard on many modern bicycles in 6mm and 8mm sizes. Pedro's led the way with our 6mm hex pedal driver specifically designed for quick-and-easy pedal installation and removal. Features include an ergonomic dual-density screw driver handle for comfort and control, a new extra-long 27cm hex key for exceptional leverage, a second ball end for quick and easy installation or removal, and heat-treated S2 tool steel construction for the ultimate in strength and lasting performance. Backed by Pedro's lifetime warranty.
$37.99
The hex wrench is the most common tool needed for the modern bicycle. Choosing the right set can make the difference between good day and a bad day working on bikes. Pedro's L Hex Wrench Set is up to the challenge. They made these wrenches from heat-treated SNCM-V alloy steel to ensure superior strength and long-lasting performance. Pedro's hex wrenches also feature extra length and a round-style end for better leverage and easy access and handling of hard-to-reach bolts. The set includes all the sizes you need in a convenient holder. - Made from heat-treated SNCM-V alloy steel to ensure long-lasting performance - Extra length provides great leverage and access to hard-to-reach bolts - Includes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, & 10mm sizes in convenient holder
$15.00
Oranj Peelz has quickly and effectively degreased drivetrains for more than twenty years using a unique citrus-based solvent/surfactant blend. Designed specifically for bicycle drivetrain degreasing, the powerful, biodegradable formula penetrates into every surface and quickly loosens and dissolves even the toughest drivetrain grime. The water-soluble formula rinses easily leaving surfaces residue-free. - Unique citrus-based solvent/surfactant blend quickly dissolves away grease and grime. - Low surface tension allows superior penetration allowing the degreaser to remove contamination from all surfaces of the drivetrain. - Biodegradable, water-soluble formula easily rinses away.
$5.99
Pedro's tire levers feature molded box construction and a proprietary plastic composite blend that makes them very strong. The unique chisel tip shape easily inserts beneath the tire bead and the slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and helpful dual spoke hooks makes removal of even the tightest tires a simple task. If you ever, somehow, manage to use your gorilla strength to break them, these levers are backed by Pedro's lifetime warranty. - Molded box construction and proprietary plastic blend - Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping - Bold shape makes it easy to remove the tightest of tires without bending or breaking -Colors include: bright yellow, pink, green, and orange colors
$7.49 - $17.99
- Redesigned TPR handle features improved ergonomics with slimmer profiles, improved tip clearance, full long-leg coverage, easy-to-read size marking, and color band for quick wrench identification. - Made from heat-treated S2 tool steel to ensure high strength and lasting performance. Pedro's Pro T/L wrenches have become a favorite of mechanics around the world. The updated wrenches feature a new handle shape with slimmer profiles and full long-leg coverage for enhanced comfort and control, improved tip clearances, easy-to-read size markings, and color bands for quick identification. Each wrench is crafted from premium S2 tool steel to ensure the strength and lasting performance. Extra length on each leg of the wrench offers better leverage and easy access to hard-to-reach bolts.
$18.00
Linklube Wet is designed for long rides in the wettest, filthiest conditions. - A readily biodegradable bespoke blend of oils, waxes and powerful corrosion inhibitors with an Irish coffee scent - Super smooth, hyper durable, quiet running chain lube for the worst riding conditions Size: 120ml Type: Squeeze Bottle
$14.95
Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-1 FEATURES - 4mm, 5mm, and 6mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit
$12.95
Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-3 FEATURES - 2mm, 2.5mm, and 3mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit
$15.95
Removes and installs crank caps on Shimano® Hollowtech II® cranks. Includes built in hook to lift the safety plate, speeding crank removal. Steel, investment cast body provides good leverage and includes an option to use with an 8mm hex wrench for removing seized caps.
$9.95
Park's Anti-Seize Compound reduces friction in threaded and press fit connections for easy assembly and disassembly. It's ideal for bottom brackets, pedal threads, headset cups, seatposts, quill stems and much more. This compound also seals and protects parts from corrosion and rust under the most extreme conditions.
$23.95
The BBT-22 is a shop-quality tool for installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-22 ensures maximum engagement with the bottom bracket cup. It can be used with a 3/8-inch drive torque wrench, a 3/8-inch ratchet driver, a 32mm wrench, the Park FRW-1 Freewheel Remover Wrench (sold separately), or a 1-inch wrench.
$27.95
A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 12-notch tool fittings, including SRAM BSA DUB, Race Face Cinch, Rotor BSA30, and others. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. The BBT-79.3 features integrated threads for full compatibility with the Park Tool BBT-RS Bottom Bracket Tool Retaining System (sold separately). The BBT-RS uses an adjustable spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage. Fits 12-notch threaded bottom bracket tool fittings with a major diameter (outside of notches) of 45–47 mm and a minor diameter (inside of notches) of 44 mm, including: - SRAM BSA DUB - Race Face Cinch - Rotor BSA30 - Zipp Vuma - Hawk Racing BB3086 - and more - 3/8" drive fitting
$17.95
Made from high precision, hardened Cro-Moly steel, Park's Bottom Bracket Tool (External Bearing) can be turned with a 3/8" drive wrench, 1" wrench, or Park Tool FRW-1 Freewheel Remover Wrench (each sold separately).
$33.95
The Bottom Bracket Wrench removes and installs Shimano Hollowtech II, Race Face X-type, FSA MegaExo, Campagnolo Ultra-Torque and TruVativ Giga X-pipe bottom brackets. Laser cut for a precise fit, one end of the BBT-9 securely engages the 16 cup notches, while the other end engages the 8 internal splines of the crankarm adjustment cap.
$16.95
The CC-4 is a drop-in style gauge that measures bicycle chain wear. The laser cut CC-4 accurately measures a long section of chain and strategically comes in contact with the chain in three places, quickly and easily taking the guesswork out of knowing when chain replacement is necessary. A worn chain will cause poor shifting as well as accelerate drivetrain wear. The tool works on any 5 to 12-speed derailleur chain (including SRAM AXS) and is designed to accurately indicate when a chain reaches .5% and .75% wear, the points at which most chain manufacturers suggest replacement.
$41.95
A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM AXS 12 speed, as well as 1/8-inch and 3/16-inch chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). *The CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivets. - Comfortable T-handle - Replaceable driving pin (CTP) - Investment cast steel body - Adjustable locating shelf
$14.95
The Park Tool FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs. -Utilizes a 12mm guide pin to stabilize the tool during use - Fits 12-spline cassette lockrings from Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and others (23.5mm diameter) - Fits some Shimano and similar disc brake rotor lockrings
$10.95
Heat treated alloy tool steel, one inch base fits wrench or bench vise. Thin wall construction allows use without removal of cones and locknuts. The FR-5.2G has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, SunRace, SunTour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also Fits Shimano disc brake lockrings - Guide pin stabilizes tool
$5.95
Park's Chainring Nut Wrench makes chainring bolt installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. And, it's double-ended to fit most slotted-type nuts, including Campagnolo chainring bolt nuts.
$45.95
In the tradition of our premium quality fold up tools, the BO-4 is a combination corkscrew and bottle opener complete with a knife/foil cutter. This multi-tool folds for storage and features all stainless steel mechanisms housed in a forged aluminum case. This is a top quality beverage tool perfect for the workbench, toolbox or wine bar.
$19.95
Park's Crank Puller is for removing crankarms on Shimano's splined, oversize, pipe-billet bottom brackets. It employs a long handle and a fine thread for the leverage and torque needed to remove tight arms. Park's unique rotating tip ensures smooth operation and long life. (The CCP-44 does not fit standard square or tapered bottom brackets.)
$19.95
A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.
$35.95
Professional quality component hex driver precisely machined to exact standards to ensure a perfect fit on compatible component fasteners. Featuring an ergonomic, CNC machined, perfectly balanced 6061 aluminum handle hard anodized to take the rigors of everyday use.
$11.95
The Park FR-3 Freewheel Remover fits SunTour four-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel.
$49.95
Park's Freewheel Remover Wrench provides superior leverage for freewheel removal and installation. Its head slides over Park freewheel removers and features a locking knob for a secure fit.
$5.95
Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.
$29.95
Once you try on Park's Heavy Duty Shop Apron, there's no going back to standard aprons. The SA-3 is made from heavy 10-ounce cotton canvas and has two rows of bar tack reinforced pockets for stashing pens, parts, tools, etc. The special crossback design removes pressure from the neck for all day comfort and a nylon quick release makes the apron easy to adjust and take off. This sweet apron is a full 35-inches in length and the bottom 7-inches of the apron can be snapped up for a custom height fit. Plus, an embroidered Park Tool logo makes the apron as good looking (even when it's dirty) as it is functional.
$7.95 - $14.95
Specially designed for crank bolts, freehub removals and pedal installs and removals, Park's Hex Tools are built for speed, leverage and comfort. Their super-precise hex heads and dual-density, ergonomic handle mean the HTs may soon become your new favorite tools.
$20.95
Park's Hydraulic Brake Piston Press is used to set or reset the piston(s) inside hydraulic disc brake calipers during installation, maintenance and repair. Just push it into the caliper to wedge the piston into place. It's made of tough tool steel with a comfortable and oversize rubber handle for a great grip.
$24.95
Designed and built to remove and install the direct mount lockring that retains front chainrings found on some Specialized, Cannondale and FSA modular cranks. - Fits chainring of Specialized, Cannondale and FSA - For lockrings with 47–48mm outside diameter and 4 or 8 notches - Fits both 4 notch (FSA and Cannondale) and 8 notch (Specialized) lockrings - 36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque - Constructed of 4140 heat-treated steel and plated for long life
$23.95
Designed and built to remove and install Shimano direct mount chainring lockrings found on XTR 9120, XT 8120, MT900, and other Shimano direct mount systems. Precisely CNC machined from 6061 aluminum for a perfect fit and to prevent marring expensive parts. - Machined flat face for optimal lockring engagement - For lockrings with 41mm outside diameter and 16 notches - 36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque - 6061 aluminum construction
$16.95
Many chains use a master link that allows the chain to be installed and removed by hand. While master links don't require traditional chain tools, over time, dirt and corrosion can make it difficult to separate them by hand. Park's Master Link Pliers make removing and installing these master links quick and easy. Simply insert the specially sized jaws into the link and squeeze the vinyl-coated handles!
$7.95
Park's Open Ended Metric Wrench is a special thin wrench with 8 and 10mm openings perfect for adjusting the thin pivot-bolt nuts on sidepull brakes (and other hex nuts on your bicycle). This handy brake tool is made of durable tool steel that's nickel plated for corrosion resistance.
$28.95
Made from tough steel and reinforced with extra material at the highly stressed wrench openings, Park’s shop-quality Pedal Wrench is built to easily install and remove pedals, and to last and last. It has 15mm and 9/16-inch precision openings to fit all pedals. And it boasts a long, round, vinyl-coated handle that won’t dig into your hand and provides optimum leverage. There's even a hole in the end of the wrench for hanging it on your toolboard.
$39.95
Park's Professional Pedal Wrench features an angled, oversize head for maximum leverage. It has two 15mm wrenches at different angles, so you can maximize your leverage, and a long, round, vinyl-coated handle that won’t dig into your hand the way flat wrenches do. There's even a hole in the end for hanging the wrench on your toolboard.
$0.86 - $3.95
Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs
$35.95
Updated to fit current 12-speed cassettes, this combination chain whip and freewheel / lockring remover wrench is heat treated to prevent bending, flexing and wear and features a long, molded handle in addition to a built in hex shaped driver. - Works on 5- to 12-speed road and mountain bike cassettes and freewheels - 1-inch (25.4mm) box-end wrench fits Park Tool Freewheel / Cassette Lockring Tools - Features hardened pins to keep the chain in place
$32.95
This combination chain whip and freewheel / lockring remover wrench is heat treated to prevent bending and flexing, with a molded handle for comfort. - 1/8-inch model works on 1/8-inch chains and sprockets - 1-inch (25.4mm) box-end wrench fits Park Tool Freewheel/Cassette Lockring Tools - Features hardened pins to keep the chain in place
$45.95
This shop-quality chain whip gives you incredible leverage without worry of slippage, and the head is uniquely shaped to allow quick and accurate access to any cassette or freewheel. - Works on 5-speed to 12-speed mountain and road bike cassettes and freewheel - Hardened bolts hold securely and make chain replacement easy - Heavy duty, heat-treated head - Round vinyl coated handle - The SR-2.3 is approximately 15" long (38cm)
$9.95
Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.
$8.49
Park's professional-quality, precision-sized spoke wrenches are hardened and chrome plated for long service. Wrenches are vinyl coated in one of four colors indicating the size at a glance. You will find these wrenches in virtually every professional bike shop and every shop mechanic's personal tool stash. Make sure you have the sizes you need in your home toolbox and bike bag.
$13.95
Because even your super-fast Mavic wheels will eventually need truing, Park designed the Spoke Wrench For Mavic Wheel Systems. This comfortable, vinyl dipped, two-sided spoke wrench is designed to easily access Mavic fittings. Plus, it fits both Mavic 9mm threaded eyelets and 5.65mm integrated nipples.
$25.95
Take the mess out of tubeless tire setup and removal. The TSI-1 enables you to inject the perfect amount of sealant directly into mounted tubeless tires through the valve stem without removing the bead from the rim. The long, thin tube is able to fit all the way through many Presta stems with removable valve cores, for tidy injection and removal of all injectable tubeless bicycle tire sealants. Features an oversized syringe body with easy-to-read gauge for precise application of sealant. - Syringe capacity: 3.5 fl. oz. (100 cc) - Tube dimensions: 120mm (4.75"") long x 3.5mm (0.14"") diameter NOTE: some tubeless valve stems feature an opening that is smaller than the tube of the TSI-1. In these cases, the bead must be removed from the rim in order to remove sealant from the tire.
$12.95
Three of the most common Torx compatible wrench sizes in our classic 3-way design. The TWS-3 is useful for disc rotor bolts (T25), chainring bolts (T30), and hydraulic brake work (T10). TWS-3 FEATURES - T10, T25 and T30 Torx compatible set - Wrenches made from industrial tool steel, through hardened and tempered for long life
$8.95
The small and handy RR-12.2 Tape Measure features a tough composite housing with an integrated belt clip and both metric and SAE readings up to 350 centimeters or 12 feet. Measurement can be locked in place using the thumb lock or the handy quick-stop button. - RR-12.2 features a new body design with a handy-quick stop button on the bottom, allowing the user to temporarily lock the tape into place with their index finger - Maximum length: 350 cm | 12 ft. - Markings: 1 mm | 1/32" (up to 6") | 1/16" (over 6") - The RR-12.2 features a new body design with a handy-quick stop button on the bottom, allowing the user to temporarily lock the tape into place with their index finger - Metric and SAE readings up to 350 centimeters or 12 feet - Markings: 1 mm | 1/32" (up to 6") | 1/16" (over 6")
$10.95
• Updated to fit better in the hand with a more rounded, smoother shape • The precision sized SW-7.2 fits the three most popular spoke nipple sizes on the market • Nickel plated for years of service • Designed for the home mechanic. FIts the following size spoke nipples: • .127" (3.23mm) • .130" (3.30mm) • .136" (3.45mm)
$25.00
It folds, it cuts, it hangs on your belt and best of all…it’s blue. Park's Utility Knife is perfect for the shop, garage, toolbox or saddlebag. The UK-1 is a combination of aluminum and stainless steel and uses readily available hardware store utility knife blades. It also features a secure, quick-change blade system that locks open.
$9.95
Park's Valve Core Tool is great for tightening, removing and installing Schrader and Presta valve cores (the cores are inside the valve), and also Presta valve extenders that have 5mm wrench flats. It's a handy tool to save a tube when all that's wrong is a broken valve, and it also lets you remove valves to easily insert sealant.