Parts & Accessories
Thule's Axle Mount ezHitch enables you to attach any Thule bicycle trailer or bicycle compatible child carrier (sold separately) to the rear axle of your bike.
Thule's Thru-Axle Hitch Adapter enables you to attach a bicycle trailer conversion kit (sold separately) to bicycles with a rear thru-axle.
Thule's Bicycle Trailer Kit easily converts your Thule Chariot carrier (sold separately) into a stable, sturdy bike trailer. With Thule's Axle Mount ezHitch system, attachment and removal are quick and easy. You even get a tall flag and reflector kit for enhanced visibility.
Convert your Thule Chariot into a high-performance jogging stroller. - Simple installation by clicking the kit into Thule VersaWing - Convenient tracking adjustment to make sure the carrier tracks straight - Includes pocket for easy storage of the jogging wheel when not in use
Surly Trailer Parts - Attaches with proprietary mounting skewer (included) or proprietary mounting nuts for compatible frames (i.e. Surly Troll, Ogre, etc.)
Surly Trailer Parts
Surly Trailer Parts - These hitch mounts are for connecting Surly Bill and Ted trailers to any 10x1mm solid axle; they replace standard locknuts - They also include threaded stubs for direct mount to Surly Troll and Ogre frames; these frames have eyelets drilled into the dropouts specifically for these mounts
A skewer for your Surly Trailer.
Surly Trailer Parts
Some of you people just can't get enough hauling done with your Big Dummy or your Surly trailer. Well, nutball cargo haulers, here is your solution: The Big Dumb Trailer Hitch. This handy piece replaces the wheel yoke of your Surly Bill or Ted trailer and inserts into the horizontal tubes on the non-drive side of your Surly Big Dummy cargo bike, thereby making it possible to haul your trailer using your cargo bike. Wow. I'm not really sure what to say here. Good for you, I guess? I hope your hemorrhoid surgery goes really well. Note: Big Dummy Hitch is not compatible with the Big Fat Dummy
These bobbins are made by the Robert Axle Project and are identical to the bobbins that came with your original BOB skewer. Slide them on your axle ends to complete your Robert Axle thru axle for BOB Trailer. - Sold in pairs - Manufactured from 303 Stainless Steel - Includes stainless steel hardware for attaching to axle
$58.00 - $65.00
Purchase our Kid Trailer axle for your bike, and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
$62.00 - $69.00
Yes! A 12mm thru-axle adapter for BOB Trailers. These Robert Axles for BOB Trailers are specifically engineered to attach the proven BOB Trailer to your thru-axle-equipped bike. Take full advantage of your modern bike with 12mm thru-axles and harness the rigidity of the thru-axle to haul your BOB Trailer. Set out on any adventure, big or small. Great for off-road tours, trail building, hauling cargo, and more! - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The axle ends are stainless steel which allows for mounting of the BOB Trailer bobbins. - No special tools required. The design allows for wheel installation or removal using your standard 5mm hex wrench. - Please note: This axle does not come with the BOB Trailer bobbins (those are available separately). Or, you can reuse your bobbins from the stock BOB Trailer Quick Release that came with your trailer. - Designed, built, and quality tested in the USA. Proven around the world.
This adapter spaces out the Steel Hitch allowing bike frames with hooded/tight rear dropouts to have hitch clearance. This adapter is also used in breezer style dropout applications for proper hitch installation.
Replacement safety flag for extra visibility.
The water-resistant Light Kit features a clip mount to install on your Burley trailer's light loop or bracket. The 5-LEDs shine bright with 4 modes (flashing, constant, chasing & random) to provide increased visibility day or night. - 5-LEDs - 4 modes (flashing, constant, chasing & random) - Includes: (1) Red Light & (2) AAA Batteries - Compatible with Burley trailers using a Light Bracket or Light Loop
Burley's Travoy Tie Down Straps help you secure your cargo to your Burley Travoy trailer (sold separately). These straps, sold in pairs, can replace the straps that come standard with the Travoy trailer or they can be used for added stability.
Burley's Travoy Universal Bag Clips allow you to make your own bag attach securely to your Travoy trailer (sold separately).
The Steel Hitch provides the critical connection from your Burley Trailer to your bicycle. The hitch installs easily on the rear skewer of your bike, and then stays attached so the Burley can be connected at any time. If you’d like to swap the Burley from bike to bike, pick up a couple spare hitches and install them on the extra bikes so the hitch doesn’t need to be un-installed when swapping bikes.
This part connects the trailer with a round tow bar to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch & Steel Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily to allow the rider to lay down the bike. Includes safety strap with retaining pin for use with the Standard Forged Hitch or Steel Hitch. If being used with the Classic Hitch the Classic Hitch Safety Strap (part 950067) will also need to be purchased.
This part connects the trailer with a square tow bar to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch & Steel Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily to allow the rider to lay down the bike. Includes safety strap with retaining pin for use with the Standard Forged Hitch or Steel Hitch. If being used with the Classic Hitch the Classic Hitch Safety Strap (part 950067) will also need to be purchased.
Ensure your pet’s trailer stays level during mid-ride breaks or pauses with The Bark Ranger™ Kickstands. Your dog will feel secure and comfortable with the added stability of these convenient kickstands. Biking or strolling, the Bark Ranger™ Kickstand helps your dog’s trailer stay level and steady when not in motion. Easy to fold and unfold, the kickstand can be installed on the front or back of the trailer to allow for stable loading and unloading. When you pause for a mid-ride water break or stop to talk to a friend during a stroll, the kickstand provides added stability to keep your pet feeling secure and comfortable. Pro tip: use the kickstand while training to stabilize the trailer during loading and unloading to help make your pet feel more at ease! You’ll Love – - Compatible with Bark Ranger™ and Bark Ranger™ XL pet trailer - Easily deploy to activate or fold to stow - Mounts to front or back of the trailer for stable loading and unloading of your furry friends Specifications: - Size L x W x H (in) 11.2 x 0.9 x 3 - Size L x W x H (cm) 28.5 x 2.3 x 7.5
Keep your Burley pet trailer (sold separately) stable and make loading and unloading your 4-legged family member super easy with this kickstand. It folds up and out of the way when it's time to go, too.
Burley's Travoy Rack Mount lets you connect your Travoy trailer to your bicycle rack rather than your seatpost (trailer, rack, and hitch sold separately).
Small but mighty, the Pet Trailer Pouch is the ultimate versatile storage solution. The large, zippered pocket is perfect for carrying smaller gear or for cleanly packing out pet waste. With integrated attachment points on the side of each pet trailer, securing the Pet Trailer Pouch is a breeze. Biking, hiking, or strolling, this added storage option is the perfect solution for you and your furry friend's next adventure.
Have fun, rinse, and repeat! The Burley Floor Mat catches all the dirt, sand, snacks, and mud for easy clean-up. - Easy removal for a quick clean-up
This rain-resistant cover for the Travoy pulls over and around your cargo, securing to the trailer frame. When not in use, it packs inside a convenient storage sack with a zippered pocket that remains attached to the frame ready for easy deployment when wet weather hits. Features: - Coated 70D nylon fabric keeps cargo dry - High viz fabric with reflective detail to keep you safe while you ride - Draw string tensions fabric around cargo - Center strap with buckle wraps around back for a secure fit - Velcro frame mount for cover storage sack - Compatibility: 2010 – Current Travoy - Weight (lbs/kg): 0.31 / 0.14
At Burley, we want to make sure that everybody has the opportunity to take a trailer with them on every adventure. The Burley Thru Axle is our solution to bikes equipped with a 12mm thru axle. Male threading on the end allows a hitch to be attached, and any Burley trailer can then be used with a thru axle bike. Features: - Official Burley adapter for bikes with 12mm thru axles - External male threading to accommodate the installation of our axle mounted hitch system - Quick and easy one-time installation
Keep your little one warm so your routine doesn't change when the weather does. • Super soft interior is plush next to your child’s skin. • Compatible with most 5-pt harness systems and systems that include a lap belt. • Velcro backing for a perfect fit with all Burley trailers and strollers. • Recommended for children ages newborn to 2-years old. • Machine-washable.
Find new horizons and discover new trails when you hitch your bike to a Coho XC cargo trailer using the Coho 5mm Skewer. Available in multiple lengths, simply replace your bike's current QR skewer with the Coho 5mm Skewer and you're ready to hit the trail. Note: The Coho 5mm Skewer is required for any bike with a QR skewer to connect to the Coho XC. This skewer will replace your bike's current skewer when using the Coho XC. Features: - Allows bikes with QR axles to connect to the Coho XC trailer - Quick and easy installation - Durable construction
Page 1 of 2 Next page