Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Bikepacking Gear

The CAM UTILITY STRAP features our 1" Cam Buckle. Weighing in at 11.25 grams, this CNC machined aluminum buckle is lighter than most plastic side release buckles. Unlike plastic, it is crazy strong and doesn't get brittle in the cold, and we think it's easier on the eyes as well. Features: - Strap comes in 18, 36, and 48 inch lengths - 1" nylon webbing offers great abrasion resistance and strength Buckle Specs: - Designed for 1" webbing - 11.25 grams - Titanium pin for lightweight and high strength performance - Corrosion resistant stainless steel spring We offer 3 lengths of straps. Keep in mind you can always trim them down and melt the end to prevent fraying. You can also link two straps together for larger loads.
- Perfect finishing touch to a bike built - 7075-T6 aluminum - M5 x 15mm - 4Nm max torque - For water bottle cages only. - Never use these aluminum bolts in a structural application.
$0.86 - $3.95
Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs
$0.94
This is a single replacement pin for Park Tool HCW-4 and SPA-6 pin spanner wrenches.
$1.05 - $2.75
Bleed fittings specifically designed for Hayes hydraulic disc brakes.
$1.36
Precision brake bleeding tools and adaptor kits for Magura brake systems.
$1.95
Fits all 1/4-inch socket-type torque wrenches for use with the Prestacycle Bicycle Bit Set. Prestacycle's bits cost 1/10 the price of buying socket head sets to meet all the requirements of bicycles. Using bits allows you to perform initial installation with Prestacycle's reversible mini ratchet – then leave the bit inside the job – remove the mini ratchet – and connect your torque wrench onto the bit to finish final tightening.
$1.99
Holds stainless steel stay rods to fender Contains: - (1) Eyelet bolt - (1) 10mm lock nut - (1) Rubber cap Compatibility: - All Hardcore, SpeedEZ, Cascadia, Cascadia ALX, & Grasshopper fenders
$2.50
Specially formulated low-friction lubricant for the seals and bushings of the air chamber for front and rear Fox Racing Shox. Float Fluid is the recommended lube for use with Fox forks and shocks. - Use when rebuilding Fox suspension to lubricate foam rings and seals - Corrosion inhibitor
$2.50
Planet Bike threaded CO2 cartridges for bike inflators. - Cartridges work in most threaded inflators - Contains pure CO2 with no oils or contaminants - 100% recyclable steel cartridges
$2.50
Compatible with SpeedEZ fenders: - 26-inch x 60mm - 700c x 35mm - 700c x 45mm
$2.89
For dust cap removal on Origin8 XLT integrated cranks
$2.95
Flexible Versatite™ mount for Dash, Zot, Dart, Hotrod, Hotshot Micro 2W, Hotshot Pro 200 (flexible mount version; not for Hotshot Pro 200C) systems. Compatible with most handlebars, seat posts, and seat stays including aero styles.
$2.95
The GP-2 includes everything needed to repair a punctured inner tube without messy glue or adhesive. Our self-adhesive patches were engineered in collaboration with 3M®, and stretch, flex, twist, and turn right along with the tube, so you can continue on to your destination with confidence. Lightly roughen the tube with the included sandpaper, clean, apply patch directly to the puncture, and you’re ready to reinstall, reinflate and ride. - Includes: 6 patches, sandpaper, in each case - Lightly roughen tube with the included sandpaper, clean the area, apply patch, and done - Not compatible with tubeless tire bodies or latex inner tubes - Box dimensions: 32 x 32 x 8 mm (1.25" x 1.25" x 0.3") - Box weight: 5 grams (0.18 ounces) - Patch dimensions: 24 x 24 mm (0.94" x 0.94")
$2.95
Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.
$2.99
Updated and more secure clothing clip for mounting CatEye safety lights.
$2.99
Optional mounting bracket for the CatEye Rapid X, CatEye Rapid X2, and CatEye Rapid X3. Allows you to mount your Rapid to any of the CatEye tail light brackets.
$3.39
Inserts and removes Presta valve cores
$3.39
Have an old pump lying around that doesn't work with the standard Presta valves? This is your solution! Built to convert your old schrader pump into a Presta pump!
$3.49
A flat won't ruin your ride when you have Lezyne's Classic Kit. It contains 8 vulcanizing patches, glue, an emergency tire boot and a stainless-steel tube scuffer.
$3.49
Bringing Lezyne's Smart Kit along means not letting a flat ruin your ride. It contains six glueless patches, a tire boot and a stainless-steel tube scuffer. All of this is stored in a compact pouch that fits just about anywhere for the ultimate in portability.
$3.55
Replacement bracket and hardware for Origin8 Classique and Rush front cargo racks
$3.59
Replacement lithium ion CR2032 batteries for use in the Femto LED lights. SPEC: 700 mAh, 3.6V.
$3.59
End Plug For Femto USB and Stvzo Femto USB Front
$3.59
Replacement rubber end plug for the Strip Drive Front, Strip Drive Rear or Strip Drive Pro Rear lights
$3.59
Replacement rubber end plug for the Hecto Drive, Micro Drive or Mini Drive lights.
$3.59
Replacement rubber end plug for the KTV Front, KTV Rear and KTV Pro Rear lights.
$3.59
Lezyne's Go-Pro LED Adapter allows you to mount your Lezyne LED light to any standard Go-Pro mount. This makes it fast and easy to switch swap out your camera and headlight using the same mount.
$3.59
Replacement mounting strap for the Zecto and Femto LED lights.
$3.73
High-quality bits for recessed Torx Plus screws. Torx Plus profile: in comparison to normal Torx profiles, the enlargement of the 6 torque-transferring flanks between the tool and the screw is effected by means of an ellipse-shaped profile design and not a circular one. This means that the power applied when screwdriving is spread over a larger area. Higher torque is transferred and the service life of the screw and tool is also enhanced. - For Torx Plus screws - Particularly hard for semi-hard materials - 1/4" hexagon drive - High torque transfer - Size: 40 IP x 25mm
Page 1 of 124 Next page