Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Bikepacking Gear

Park Tool Replacement Chain Tool Pin
$0.86 - $3.95
Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs
Park Tool Replacement Spanner Pin
$0.94
This is a single replacement pin for Park Tool HCW-4 and SPA-6 pin spanner wrenches.
Prestacycle Torque Wrench Adapter
$1.95
Fits all 1/4-inch socket-type torque wrenches for use with the Prestacycle Bicycle Bit Set. Prestacycle's bits cost 1/10 the price of buying socket head sets to meet all the requirements of bicycles. Using bits allows you to perform initial installation with Prestacycle's reversible mini ratchet – then leave the bit inside the job – remove the mini ratchet – and connect your torque wrench onto the bit to finish final tightening.
Hayes Bleed Kit Adapter
$2.88
Bleed fittings specifically designed for Hayes hydraulic disc brakes.
Park Tool Vulcanizing Patch Kit
$2.95
Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.
Prestacycle Presta Head Rubber Gasket
$2.95
Prestacycle redesigned the Presta Grommet in May 2012 to fit to modern standards. PRestacycle's design works so well, it’s been copied by others including major floor pump makers. Prestacycle's design engages the Presta valve just below the cap threads and requires less insertion. The head is now very easy to get on and off, and gives a nice “click” feeling when it’s installed in the right position. Safe for all types of Presta valves, including tubeless and tubeless-conversion valves. Will not harm newer lightweight performance valves. Fits all Prestaflator BIG Push/pull Presta heads. Also fits all Silca pump heads that use the 24.1 or 242 Gasket.
Prestacycle Spin Head Rebuild Kit
$2.95
Renew all the seals in your Prestaflator spin head. These o-rings fit the seals, Plus there are five (5) Presta Valve replacement washers. Replace as needed for a good connection to your tire valve.
Park Tool Super Patch Kit (Carded)
$3.49
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
Park Tool Tire Lever Set (Set of 2)
$3.49
• Updated with a new material and new design • Features a wide flat tip for easy entry and fast tire removal, ergonomic shape and a handy spoke hook when multiple levers are needed • Perfect for tight beads and tubeless tires • Sold in sets of two.
Park Tool Tire Lever Set (Set of 3)
$3.95
• Updated to be stronger, smoother, and more versatile • Features a new material and redesigned tip for easier entry into just about any tire, including tubeless • The unique design lifts the tire away from the rim and features a spoke hook to use when multiple levers are needed • This set includes 3 tire levers
Prestacycle CR/V Bicycle Bit Five Piece Set
$3.95
Hardened CRV steel bits. 3mm, 4mm & 5mm HEX sizes, T20 & T25 TORX 1/4" bit sizes. Also perfect for most brands of torque wrenches with the optional adapter below.
Prestacycle Prestaflator Rebuild Kit
$3.95
Renew all the seals in your Prestaflator tool. These o-rings fit the hose, Pressure Release button and Trigger Plunger on a Prestaflator tool. Kit also includes internal trigger-plunger washers for 2010 and newer Prestaflator tools. O-rings made from high quality buna-nitrile (BN70) rubber with a durometer rating of 70. Updated 2013 Plunger seal is more reliable and gives the tool easier trigger regulation and retro-fits to 2010 and newer tools. Presta Head washers and rebuild kits are now sold separately.
Boeshield T-9 Lubricant
$3.99 - $18.99
- Developed by the Boeing company for lubrication and protection of aircraft components - Dries to a thin waxy film that clings to metal for months - Law prohibits ORM-D materials from shipping by air
Lezyne Speed Chuck
$3.99
Lezyne's Speed Chuck is the fastest way to air up your aero disc wheels. It's made from Composite Matrix and is designed to fit Presta valves on deep-dish carbon disc wheels.
Light & Motion Vis Pro Replacement Strap
$3.99
Need to replace a strap on the compact Vis 180 Pro taillight or the front mount of the Vis 360 Pro? This is a durable direct replacement that installs in seconds and can be cut to the preferred length.
MSW Glueless Patch Kit
$3.99
Getting a flat is a pain in the butt. It's an even bigger pain in the butt if you don't have the stuff you need to get back home. These patches will help get you back to where you need to be. - Six patches - Sandpaper - Instructions included
MSW Tire Levers
$3.99
Put these beauties in your tool kit for quickly fixing flats on the road. - Light weight, low profile lever - Durable composite construction - Easy to get under the tire bead - Set of three levers to assist with hard-to-remove tires - Included cap keeps the set together
Muc-Off Expanding Pink Sponge
$3.99
- Microcell is ergonomically contoured for maximum comfort and surface area
Park Tool Emergency Tire Boot
$3.99
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
Avid Elixir Pad Spreader Tool
$4.00
Brake pad spreader tool for Avid Elixir brakes.
Avid X0 Trail Pad Spreader Tool
$4.00
Designed to fit snugly between the disc brake caliper pistons or pads, preventing inward pad movement to preserve hydraulic brake adjustment while the wheel is off the bike.. - For disc caliper repair - Fits SRAM Guide, Trail, and Avid Code Brakes
Genuine Innovations 16 Gram Threaded CO2 Cartridges (20-pack)
$4.00
16 grams of Genuine Innovations' most popular size CO2 cartridge. Perfect for road tires and standard bike tires. These threaded CO2 cartridges are compatible with all Genuine Innovations inflators. - 20-pack
Jandd Reflector Mount
$4.00
The Jandd Reflector Mount allows riders to attach a reflector to a rack.
Planet Bike Hardcore Fender Hardware Kit (45mm)
$4.00
Compatible with: - Hardcore bike fenders - 700c x 45mm - Full bike fenders - 700c x 45mm - SpeedEZ bike fenders - 700c x 45mm - Hardcore Recumbent bike fender - 700c rear - Contains 45mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers
RockShox Reverb Hydraulic Fluid
$4.00 - $24.00
Keep your Reverb dropper post performing at its best with RockShox's Reverb Hydraulic Fluid. It's optimized for the remotes of the Reverb as well as the Monarch XX rear shock.
Pedro's Micro Levers
$4.25
- Snap onto any Rx Micro multi-tool - Integrated quick link storage pockets - Levers snap together with bonus tool insert featuring integrated Presta Valve Core Tool, Valve Extender Wrench, and Storage Pocket for Shimano and Campagnolo master pins. - Pedro's proprietary plastic blend delivers impressive strength & performance in compact size. Pedro's new Micro Levers are born from award-winning DNA, fight well above their weight of just 20 grams, and pack a few extra tricks up their sleeve. Bring on the flat tires and trail-side repairs. Available in yellow, pink, green, orange, and black.
SKS EVA Pump Head Grommets
$4.25
Bag of 3 replacement washers for EVA heads on all SKS floor pumps
Park Tool Chainring Nut Wrench
$4.49
Park's Chainring Nut Wrench makes chainring bolt installation and removal easy. It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt. And, it's double-ended to fit most slotted-type nuts, including Campagnolo chainring bolt nuts.
Jandd Pump And U-Lock Tie
$4.95
Made of heavy-duty hook-and-loop material, the Pump and U-Lock Tie also has a neoprene pad stitched next to the rectangular plastic common loop. Put the neoprene pad between your pump and frame, double-back the hook strip onto the loop, and you can rest assured that no matter how hard you ride, your pump will stay put. In addition to attaching pumps, the Pump Tie is also excellent for securing U-locks, fishing poles, and other delicate items that require a secure bond and a load-damping pad. - Dimensions: 1.5 x 10 inches - Weight: .5 ounces/14 grams
Park Tool Gear Clean Brush
$4.95
Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.
Page 1 of 49 Next page