Bikepacking Gear

- The original third-Eye eyeglass mirror design - Shatter-Proof aluminized glass mirror, Resists discoloration - Mounts to left or right sun/Eyeglass temple-Arm - Rubber-Tipped outer prongs provide a no-Slip mount

The Third Eye Foam Helmet Mirror allows you to see what's coming behind you so you can ride defensively and stay safe on the road. The shatter-proof glass mirror is distortion-free and highly durable. It attaches to the inner or outer rim of almost any helmet with a high-tech product called Dual-Lock.

The Third Eye Hardshell Helmet Mirror clips on to all hardshell helmets and many helmet visors. Its distortion-free, shatterproof glass mirror allows you to see what's coming from behind so you can ride defensively and safely.

- The original third-Eye bar-End mirror design - Shatter-Proof aluminized glass mirror, Resists discoloration - Mounts to most handlebar bar-End with a rubber, Internal-Expanding plug system

- Shatter-Proof aluminized glass mirror, Resists discoloration - Mounts on either side of helmet offering a wide range of adjustment - Mirror and/Or arm can be detached from helmet mount - Adhesive backed plastic fan-Plate fits most helmets

The 45NRTH stud insertion tool seats and removes the stud from the stud pocket. Customize your stud tread pattern or replace missing studs. Works with all 45NRTH studdable and studded products. - Tire studs sold separately - POM-injected handle - Stainless steel barrel - Thumb and index finger grips for more comfort and control - Compatible with studs that have a 3.5mm or smaller shaft

Ten years of 45NRTH? We'll drink to that. This insulated bottle keeps your water from freezing on frosty rides. Use them in the summer to keep your water cold. Win-win.

This 23 oz bottle is insulated to make year-round riding easier—forget dealing with frozen water in the winter or too-warm water in the summer. - Features a Chromatek liner, a proprietary insulating barrier that lines the core to maintain beverage temperature. - Squeezable materials allow for unmatched flexibility and comfort - Purist technology shields the inside of the bottle from any bad taste, mold, or staining - Volume: 23 oz

This 23 oz bottle insulates your ride beverages year-round so they never get too warm or too cold. - Features a Chromatek liner, a proprietary insulating barrier that lines the core to maintain beverage temperature. - Squeezable materials allow for unmatched flexibility and comfort - Purist technology shields the inside of the bottle from any bad taste, mold, or staining - Volume: 23oz

- Compatible with 6-12V E-bike battery - Integrated reflector - Water and shock resistant - Mounting distance 50 mm - Visible from the side - 40g

- Compatible with 6-12V E-bike battery - Integrated reflector - Water and shock resistant - Mounting distance 80 mm - Visible from the side - 40g

- High power 20 lux LED light, more than 50,000 hours life span - Integrated retro reflector to be better seen by oncoming traffic - Compatible with 6-12V E-bike battery - Optimal light distribution by our double lens technology - Clear lens technology, you are also visible from the side - Compact, sportive design - 80g

The Stu Stick is a 44-gram rotor truing tool. Whether you want to slip it into your hydration pack for that enduro mountain bike ride or travel the world working with one of the staples of cross racing, it's up to the task. You can even use it to crack open a beer after you're done with the day's fun. - Weight: 44g - Made of aluminum

These gems are machined to precisely fit the preload adjuster cap on all modern 24mm spindle Shimano cranks. The finger spline offers good leverage to install, remove, or adjust the preload cap. We also added a 5mm hex in the center should you need a little extra leverage that a hex key provides. These are also compatible with our fit kits and with the addition of a saddle height bullet can be used to more accurately measure saddle height.

Suspension service is a specialty within bicycle repair, and it takes specialized tools to perform this work. One of the things that any factory tech will tell you is nice to have are sockets specifically made or altered for the low profile hex on the top of each fork leg. The lead-in or chamfer on a standard socket will greatly decrease the contact between tool and part and can easily scratch or deform those nuts. For years shops have been grinding down their sockets to remove the chamfer. The problem is that you're still often left with a loose-fitting socket that is still prone to chewing up those delicate parts. That's why we started from scratch. We made our sockets from billet aluminum to exacting tolerances to keep these parts in good shape. Fully CNC-machined with zero lead-in, they make the specialty that is suspension service a little bit easier. They feature a 3/8" square drive for use with your favorite torque wrench as well as finger splines to help run the top caps into the fork legs with those oil soaked hands. We also kept them short (1" or 25mm for all sizes) to reduce the chance of them slipping off of the top cap under torque. - Made from billet aluminum to exacting tolerances to keep form damaging the suspension - Finger splines so you can thread it easily by hand - 3/8" square drive - Short (1"/25mm for all sizes) to reduce the chance of them coming off of the top cap under torque - Made in Bend, Oregon Applications - 24mm socket - used on SRAM top caps - 26mm socket - used on Marzocchi and Reverb sealheads - 27mm socket - used on Fox and X-Fusion top caps - 30mm socket - used on the RS-1 SRAM sealhead removal tool as well as a handful of other forks. - 6-size set covers most modern suspension forks on the market: 24, 26, 27, 28, 30 and 32mm

Bearing drift designed for the SRAM DUB crank platform and use with the Abbey Bike Tools Modular bearing press. SRAM recently launched a new crank platform called DUB to improve bearing durability and compatibility that modern frames have dictated. This 28.99mm spindle and its press fit bottom bracket requires some special drifts to install correctly. We worked with the crew at SRAM to develop tools for this and came up with some simple and important tweaks from a standard bearing drift. These drifts have a tapered boss that forces the small O ring into its gland. A normal drift with a square boss can easily tear the fragile O ring that helps with bearing durability. So this basic modification makes sure your bottom bracket retains the durability it was designed to have. - Comes as a set of two drifts

The Abbey Bike Tools 4-way precision multi-tool is the perfect choice to carry with you while on a ride. We designed this beautiful green anodized tool to fit into a compact saddle bag, riding wallet, or tuck into a jersey pocket.

This bottom bracket socket is for use on BSA30 12-notch bottom brackets, such as SRAM DUB, Rotor, Race Face Cinch, and many others that use this common tool interface. Made with the same top-shelf aluminum alloy to the same exacting fit and tolerance as the rest of our socket range, these sockets won't chew up your shiny new bottom bracket.

This bottom bracket socket is for use with Chris King's T47 Bottom Bracket. Made with the same top-shelf aluminum alloy to the same exacting fit and tolerance as the rest of our socket range, these sockets won't chew up your shiny new bottom bracket. This socket features a threaded boss to allow you to bolt the tool into place when dealing with these exceptionally thin tool interfaces. This is a feature unique to our tools that adds a layer of protection and security to your parts and tools.

This bottom bracket socket is for use with Hope's BSA30 bottom bracket. Made with the same top-shelf aluminum alloy to the same exacting fit and tolerance as the rest of our socket range, these sockets won't chew up your shiny new bottom bracket.

This bottom bracket socket is for use with the Praxis M30 bottom bracket. Made with the same top-shelf aluminum alloy to the same exacting fit and tolerance as the rest of our socket range, these sockets won't chew up your shiny new bottom bracket.

This tool is compatible with all outboard bearing cups that our dual-sided Shimano socket doesn't fit, including Campagnolo, SRAM, FSA, and older Shimano. These gems start as a 7075 aluminum billet and get precisely machined. We take the time to put some nice deep finger splines in this tool so you can thread the cup into the frame by hand with those greasy fingers you haven't washed in a while. - Hard anodized and laser-engraved with torque specs. - Use your favorite 3/8" square drive ratchet or torque wrench to tighten it down.

All the awesomeness of the dual-sided tool but in a single Shimano or Campagnolo version. Updated in 2020, the single-sided tool now has the same size handle (1/2 inch) as the dual-sided tool. - When purchasing the chain whip, buy the 1/2-inch handle chain whip.

While most other manufacturers cast or forge their bottom bracket tools, we machine ours for greater precision. Whenever you're dealing with anodized surfaces, great care needs to be taken to keep those surfaces from getting marred, gouged, and stripped out. That can be nearly impossible with some spanner style tools, and difficult with other loose-fitting sockets. The most unique feature about this tool is the inner nub; that nub in the center of the tool is the same size as the crank spindle. What this does is give you a second point of contact that keeps the tool from coming off of the part when trying to remove stubborn cups. This dual sided socket is designed to work with the new Shimano DA-9000/XTR-BB93 bottom bracket as well 6800 Ultegra and 5800 105 11spd groups (BBR-60).

The Whip-It maximizes function and simplicity. Made from a 12-inch length of stainless steel, it gives you enough leverage to loosen even the most stubborn cassettes. The Whip-It's round handle provides comfort surpassing other flatbar-style chain whips on the market. The icing on the cake is that Abbey's signature tool, the Crombie, stores inside the handle of the Whip-It; this means the two tools you use together get stored together and travel together, creating less clutter in your tool box.

The Crombie tool is a game changer when it comes to swapping cassettes. Whether you're a professional mechanic swapping cassettes several times a day or a DIY kind of guy, this gem has a place on your tool bench. The first time a quick release spring rolls under your bench the Crombie tool paid for itself. If you like to remove the cassette for a detailed cleaning or just swapping from one cassette to another, it's a big time saver and a breeze to use. This version of the tool has a Shimano/SRAM remover on one side with a Campagnolo on the other. A precision machined spline ensures maximum engagement and durability. The STANDARD version comes with a solid handle which gives the tool some mass making it the preferred choice in the shop. The SUPER LIGHT version shaves 125 grams out of the handle. SL handles are plenty durable for lockrings that are torqued close to the 40 NM spec. If you commonly come across over torque lockrings get the standard handle!

The Geiszler is a stepped adapter designed to work with every thru-axle fitment currently on the market: 12x142, 12x150, 15x100, 20x110, Lefty and 24 Maverick. The tool will allow precision dishing without removal, a notable time saver when wheel building. The Geiszler can be bolted into the hub with the included stud for serious wheel work. It can also be slipped into place for minor adjustments and retained by the compression of the truing stand. This simple tool eliminates clutter around your truing stand and keeps you from searching for the right adapter. - Made in Bend, Oregon - Bolts and washers for use with single-armed wheel stands are available upon request, for free

With thru axles becoming more and more common, the original Crombie tool was due for a makeover. We took the piloting pin and plus-sized it to work with the 12mm thru axle fitment that is actually standardized. We make this version as a dual-sided tool with two S Group ends, one for thru axle wheels and the other for regular hubs. The regular side has a hole deep enough to hide a skewer nut; it's really the best of both worlds. - Comes with a solid handle - Note: this version of the Crombie tool is not compatible with any Campagnolo wheels. - Dimensions: 9.625in x 1.0in

With thru axles becoming more and more common, the original Crombie tool was due for a makeover. We took the piloting pin and plus-sized it to work with the 12mm thru axle fitment that is actually standardized. We make this version as a dual-sided tool with two S Group ends, one for thru axle wheels and the other for regular hubs. The regular side has a hole deep enough to hide a skewer nut; it's really the best of both worlds. This SUPER LIGHT version has a hollow handle to save weight for the traveling mechanic. SL handles are plenty durable for lockrings that are torqued close to the 40 NM spec. - Note, this version of the Crombie tool is not compatible with any Campagnolo wheels. - Dimensions: 9.625in x 1.0in

The Crombie tool is a game changer when it comes to swapping cassettes. Whether you're a professional mechanic swapping cassettes several times a day or a DIY kind of guy, this gem has a place on your tool bench. The first time a quick release spring rolls under your bench the Crombie tool paid for itself. If you like to remove the cassette for a detailed cleaning or just swapping from one cassette to another, it's a big time saver and a breeze to use. This version of the tool has a Shimano/SRAM remover on one side with a Campagnolo on the other. A precision machined spline ensures maximum engagement and durability. The STANDARD version comes with a solid handle which gives the tool some mass making it the preferred choice in the shop. The SUPER LIGHT (SL) version shaves 125 grams out of the handle. SL handles are plenty durable for lockrings that are torqued close to the 40 NM spec. If you commonly come across over torque lockrings get the standard handle!

With a 15mm box end on one end and a custom 6 and 8 millimeter swivel bit on the opposite end, it's the only pedal wrench you'll ever need. Perfect to keep at the fit station, on the sales floor, and at the tool bench. The shop version of the tool gets an extra 6" (15cm) of leverage over the team issue for an overall length of 18 inches. Great for removing those stubborn pedals. - Durable black Cerakote finish - Made in Bend, Oregon

Two years in the making, this chain tool is built to stand the test of time. The threaded body and lead screw are made from cro-moly and receive a low friction powder vapor deposition (PVD) coating to give it a silky feel you've never felt in a chain tool before. Large handles ensure ease of use with any chain. The freely rotating pin is made from a shock rated tool steel and will likely last as long as the rest of the tool. The chain tool comes with a spare chain pin in the handle and they are cross-compatible with Shimano and Campagnolo pins. The greatest part of the chain tool has to be the interchangeable mid plate. The saddled part that holds the chain in position can be swapped to work with nearly anything the industry comes out with. This ensures that your investment won't become obsolete when company "X" comes out with an 18-speed cassette in 20 years. The tool also peens Campagnolo 11 and 12 speed chains to factory specs using a backstop that threads into the backside of the tool as a stop. Compatible with 9-12 speed chain, including the new 12-speed chains from Campagnolo and Shimano's XTR 9100.

Coming in at roughly 265 grams, the Team Issue Titanium Hammer is a big weight savings over more traditional hammers. The soft face is replaceable with commonly available 1" threaded faces. At 12" long, it's compact but still long enough to remove those stubborn bearings. We finish off the Team Issue hammer with a custom silicone grip from ESI to give a bit of cushion from the all-metal construction.

We went through extra steps to make this tool half precision measuring instrument and half pry bar. - Tolerances as tight as a quarter of a thousandth of an inch (.0063mm) in some critical dimensions of this tool. - Ability to lock in the feeler so you don't have to second-guess your measurement after bumping it on the tire. - Top half of tool will rotate out of the way of fender stays and frame tubes. - Feeler gauge stick stores inside the top half of the tool, very handy for the traveling mechanic. - T-bolt extends past the tool for access to those problematic hangers found on some modern full suspension bikes. - Compact at just under 11" ( 28cm) - Re-buildable - While ideally your HAG should be sent back for a rebuild, it is possible to do them in the field by replacing the brass bushing in the T-Bolt. - Compatible with the three most common wheel sizes (26, 27.5/650B, and 700/29)

This is an add-on kit for the popular Abbey Bike Tools Modular bearing press, adding even more versatility for the modern mechanic to deal with all the different shapes, sizes, and styles. The kit includes drifts for all common bearing sizes with a bearing inner diameter (ID) of 15mm or larger. Includes the over-axle drifts required to install bearings in DT, Zipp, and other modern captured bearing hubs. These drifts feature a 1/2" (12.7mm) ID and can be used with other presses if need be. Drifts included with this set precisely fit the following bearing sizes: - 6702 - 6703 - 6704 - 6803 - 6804 - 6902 - 6903 - 6904 - 17287 - 15267/15268

This dishing gauge is fully machined from big billets of aluminum to a final shape and accuracy that's as nice to use as it is to look at. Compatible with wheels from 20-29 inches and all hub combinations. Standoff feet are included for checking dish with the tire in place, even the big fat ones. The gauge uses a unique spring-loaded mechanism to drop the plunger. Press that little brass button on the front and the plunger will drop to the face of the hub. No archaic time-sucking threaded indicators here!

The Micro Modular Bearing Press is designed with smaller hub and suspension bearings in mind. With drifts to service bearings with an inside diameter of 13 millimeters and smaller, this is a great choice for those smaller, more delicate bearings. The press head features a true thrust bearing; this unique feature keeps the press action super smooth and cuts down on the effort required. The thrust bearing isolates all of the torque from the compression, which allows your bearing to go in square. It works so well that you don't need even need handles. The press head has a 6mm hex in the top of the press head so you can use it as a bail out gear in case you find something that is fitting excessively tight. Drifts included to precisely fit bearing sizes: - 608 - 608_9 - 609 - 619 - 688 - 6000 - 6001 - 6701 - 6800 - 6801 - 6802 - 6900 - 6901 - 6902

Aquamira 1 oz. Water Treatment (Chlorine Dioxide) kills bacteria while enhancing the taste of treated water. Everything you need to treat 30 gallons in the field comes in a compact, lightweight kit and works in virtually every situation. It’s so effective, even the CDC recommends Chlorine Dioxide as the most comprehensive water treatment available. Comes in a plastic bottle. Features: - Kills odor causing bacteria and enhances the taste of stored potable water - Treatment has a 4-year shelf life from the manufacturing date - Treats up to 30 gallons - Easy to Use - No Aftertaste - Made in the USA Specs: - Volume: 2 fluid ounces (combined both droppers) - Capacity: Treats up to 114L of water - Weight: 3.3oz Directions: 1. Squeeze 7 drops of Part A and 7 drops of Part B in the mixing cap. 2. Wait 5 minutes! 3. Empty the mixing cap into 1L of water. 4. Shake and wait 15 minutes. Wait up to 30 minutes If water is very cold, cloudy or tinted. 5. Hydrate!

- Compatible with the AeroPress coffee maker and the AeroPress Go travel coffee press. - 350 AeroPress microfilters - Removes grit, unlike other press-type coffee makers - Biodegradable - Compostable SPECIFICATIONS - Weight: 2.5 oz - Dimensions: 2.5 × 2.5 × 1.75 in

The AeroPress Go travel coffee maker is engineered to fuel an active lifestyle. It gives coffee lovers everything they need to conveniently brew superb coffee anywhere they want. Like the original AeroPress, the AeroPress Go brews American, espresso, and cold brew style coffee that can be enjoyed as is or used in a wide range of energizing and refreshing drinks. - Delicious coffee anywhere: Optimized for traveling, camping, boating or just at work - Simple: Smart design is easy to use and clean up takes seconds - Good to Go: Engineered to be the perfect traveler, it is compact, light weight and durable – everything packs up neatly in the included mug - Superb taste: Free yourself from hotel coffee Includes: Mug with lid, 350 micro-filters in a storage carton, chamber, plunger, filter cap, filter holder, stirrer and scoop. SPECIFICATIONS - Weight: 16 oz - Dimensions: 4 × 4.5 × 7.2 in

Fun and funky, the All-City Parthenon party purist water bottle offers up wild style and 22-oz. of cold liquid refreshment any time, any place. Shielded from bad taste, mold, and staining, nothing sticks to the material, so your bottle remains clean and your beverage always tastes the way it should. - Origin: Made in USA - Material: Food-safe LDPE #4, BPA-free - Care: Rinse bottle with warm water and a mild detergent, or alternatively, the bottle is dishwasher-safe on the top rack

Keep yourself hydrated any day that ends in Y with All-City’s Week-Endo Purist Water Bottle. - Rinse bottle with warm water and a mild detergent or place it in the dishwasher on the top rack - Made of food-safe LDPE #4 plastic - 22-oz. capacity with a slick push-pull cap

Keep yourself hydrated any day that ends in Y with All-City’s Week-Endo Purist Water Bottle. - Rinse bottle with warm water and a mild detergent or place it in the dishwasher on the top rack - Made of food-safe LDPE #4 plastic - 26-oz. capacity with a slick push-pull cap

Record scratch… this here's our Turntable Sling Bag! Sharp and versatile, it's designed to prioritize and organize everyday items like wallets, phones, keys, or shades. Wear it comfortably as a sling bag or across your lower back, or adjust the straps and stick it on your handlebars for easy rides to work or happy hour. Its exterior bungee compartment is perfect for an extra layer when you think you might stay out late, and extensive product testing confirms up to three cans of LaCroix fit inside. Whether for work or play, with the Turntable Bag you won't miss a beat. - Main body material is 100% post consumer recycled ripstop polyester - Main body fabric, lining, and hardware are all bluesign approved, ensuring sustainability and the lowest possible impact on people and the environment - Two compartments and a slip pocket inside - Padded back panel adds structure and comfortable accommodations for your U-Lock - Dimensions: 25cm x 12cm x 16cm; 1.75L volume

- Replaces original Shimano bleed fitting with easy to use lever reservoir bleed fitting

- Internal valve prevents air from being drawn into the system - Includes one Quick Bleed valve and 2 sections of bleed tubing

- Features bleed fittings for Hope, Magura, Avid, Hayes, Formula and Gatorbrake - Includes bleed tubes, syringes, gloves, and handy carrying case - See BTI part number AX-9617 for Shimano bleed fitting

The Lap Bag is the perfect companion to hold small paddling essentials in the cockpit of your boat—snacks, water bottle, sunscreen, and a spare layer. All Lap Bags feature a heavy duty waterproof TRU® Zip closure and a D-ring toggle attachment. Size: 10L The lap bag is compatible with all models with a D-ring style seat toggle: Classic, Mule, Expedition, Scout, Refuge, and Caribou. Not compatible with self bailer configurations.

Sporting your favorite bike shop logo, these Voile Straps® are made of tough stretch polyurethane, with a UV-resistant additive to increase their lifespan. Their Super Tough nylon buckle is non-marring, non-conductive, and non-reflective. Few things in life are as reliable as the original Voile Strap®. Over the last 30 years they have become the ultimate alternative to duct tape, nylon straps, and bungee cords. On the job, in the outdoors, and everywhere in between: they are the definitive way to secure, bundle, and repair almost anything on the go.

Stash your ride snacks, repair kit, keys or other ride essentials in this secure and stylish Angry Catfish logo KEG. - Fits in standard bottle cages - Keeps contents secure and dry - Easy screw-down top - 16 oz

Whether you commute to work or race in the UCI World tour, the Ass Saver Regular saddle mudguard will keep your butt dry and dramatically increase the comfort on cold and wet rides. - Keeps your butt dry on wet roads - New patented FLIP-TIP™ attachment system - Easy to fit, requires no tools - Fits every standard rail saddle, also with carbon rails. - Suitable for tire widths between 23-35 mm "Quite possibly the easiest fender to fit" Colin Levitch, Cycling News The latest Ass Saver sports the new FLIP-TIP™ attachment system. Once fitted, simply fold up the tip of the Ass Saver and it will securely lock to the saddle rails. Have no doubt, The fourth generation of Ass Savers clip-on mudguards is your new best friend. Easy to hook up with, never being a burden and always there to cover your back, no matter what.

Represent, and hold 22 ounces of your favorite riding beverage in this cool water bottle. It looks great on any bike.

Represent, and hold 26 ounces of your favorite riding beverage in this cool water bottle. It looks great on any bike.

With an iconic design, AND the iconic ACF logo, this bottle holds up to bangs, bumps, and drops. - Guaranteed leakproof, includes tethered cap - Made from Tritan and is BPA, BPS, and Phthalate free - Easy to clean and dishwasher safe - Temperature range is -158F to 212F - Permanent graduation for easy measuring SPECIFICATIONS - Bottle Type: Non-Bike - Volume: 16 oz - Material: Plastic - Insulated: No

Introducing the ultimate companion for your biking adventures: the Nalgene ACF Tough Rider Bottle! Ride with confidence knowing your hydration is in good hands. Crafted with durability in mind, this bottle can handle all the bangs, bumps, and drops of your biking escapades. Its iconic design not only stands out but also ensures you'll never lose sight of your trusty hydration buddy. Featuring the legendary ACF logo, this bottle is more than just a piece of gear—it's a statement. Show off your commitment to quality and endurance with every sip. Don't let your thirst hold you back on the trails. Grab your Nalgene ACF Tough Rider Bottle today and ride on with style and resilience!

In a throwback to the campfire mug of past generations, the MiiR Camp Cup takes on beauty, durability, and functionality in one fell swoop, making it loveable for all the right reasons (and impossible to own too many). Perfectly paired with the Press-fit Slide Lid. Slide to cover the mouth opening when not in use for an extra dose of insulation and splash-proof peace of mind. Care Wash before first use. Hand wash recommended. Lid top rack dishwasher safe. Do not freeze, do not microwave, do not bleach, do not overfill.

An extended secure space for storing frequently-used items, whatever the terrain. The Backcountry Long Top Tube Pack is a convenient space to store frequently used items, particularly on mountain bikes with sloping top tubes or limited space inside the main frame triangle. The long top tube bag for mountain bikes is ideal for stashing snacks, light valuables and electronic devices. It features an internal divider and mesh pocket and securely attaches to the top tube with Hypalon-reinforced velcro straps to minimise abrasion. A one-finger two-way waterproof zipper puller allows easy access on the move and safeguards contents against water and dirt when closed. The long top tube bag also features a padded foam base to protect contents and a battery lead port for charging electronic devices on the go. Materials The Backcountry Long Top Tube Pack is made from Dimension-Polyant VX21, a four-layer laminated fabric originally developed for the maritime industry and our proprietary 420D nylon; a rugged fabric made to our own exacting specifications for durability and waterproofing. Designed to fit the demands of off-road riding, these materials offer full waterproofing, light weight, low stretch, and high abrasion and tear resistance. Notably, it's welded together at the seams, creating a watertight seal that ensures the saddle bag remains completely waterproof Care Hand wash, using a mild diluted soap if necessary. Afterwards, let it air dry. Do not machine wash, machine dry, or iron. Features - Fully waterproof two-way zipper - Protected cable port - Slim-line design to avoid knee rub - Internal pocket for organization - Reflective graphics for enhanced visibility - Ultra-durable, lightweight body fabric

The first streamlined handlebar bag designed specifically for aerobars and the demands of ultra-distance cycling competition and audax. Mounting securely underneath aero bars, this pack provides streamlined storage for lightweight and compressible items. The perfect balance between carrying capacity and a minimal front profile, this aero bar bag is designed to provide additional storage without slowing you down. A customisable attachment system ensures this pack is compatible with all bikepacking aero bars and an adjustable bungee tie down creates additional space between the aero bars for items that require quick access. The roll down closure provides flexible carrying capacity while minimising the aero bar bag’s front profile and maintaining its slim design.

The Expedition Frame Pack is designed for storing items within the main triangle, creating a lower center of gravity and enabling more natural bike handling. The frame bag securely fastens to the top tube with Velcro straps, and is useful for storing heavier items as part of a larger bikepacking setup. The result is an even, balanced load, making longer tours and multi-day trips more comfortable. The frame bag is equally useful when used on its own for storing essentials on a daily commute. It’s constructed from a lightweight fabric, custom milled to Apidura’s specifications and welded together at the seams to create a watertight seal. Zippers with protected closures ensure that kit stays dry, even in a sustained downpour. A battery lead/hydration hose port is handy for charging devices or staying hydrated on the road. Features - Two versions to suit both tall and compact head tubes - Interior storage pocket for organization - Lightweight waterproof laminate, developed specifically for Apidura - Carbon-friendly adjustable strap positioning - Protected battery/hydration hose port - Reflective graphics for increased visibility Materials - The frame bag is cut from a three-layer laminate fabric that was developed specifically for Apidura. The material is lightweight, and is highly resistant to tears and abrasion. Notably, it’s welded together at the seams, creating a watertight seal that ensures complete waterproofing. Care - Hand wash, using a mild diluted soap if necessary. Afterwards, let the Frame bag air dry. - Do not machine wash, machine dry, or iron.

The quintessential bikepacking bag for the great outdoors. The Backcountry Saddle Pack is an essential partner for bikepacking trips in the wilderness. Designed to hold light, compressible clothes and gear on off-road rides, the Pack provides a spacious compartment under the saddle, eliminating the need for a rear rack. It’s held securely by a stable three-point attachment system, ensuring maximum comfort. The all-weather fabric offers unparalleled resistance to abrasion and tears, and it’s also simple to pack down. There’s a bungee cord for spare clothing, while reflective graphics and two light attachment points mean that there’s no need to compromise on safety. The roll-down compression and closure system mean the Pack’s volume can be tailored precisely to fit a range of packing needs. The Backcountry Saddle Pack is made from Dimension-Polyant VX21, a four-layer laminated fabric originally developed for the maritime industry. Designed to fit the demands of off-road riding, the material combines waterproofing, light weight, low stretch, and high abrasion and tear resistance. The base of the Saddle Pack and Velcro straps are reinforced with Hypalon, a durable rubberized nylon that provides extra protection against friction and puncture. For the compression straps, Woojin buckles have been chosen for their strength and reliability. A lightweight molded section of HDPE thermoplastic sits in the lower section of the Saddle Pack to reinforce its structure.