Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Gifts $200 and Up

$4,199.25 - $11,499.00 $5,249.25 - $11,499.00 Up to 25% Off
The Ripley is our snappy, flickable, playful, fast, lightweight, and versatile 29” trail bike. 120mm Rear Travel / 130mm Front Travel / 29" Wheels (Up to 2.6 tires) Its combination of modern geometry, a stiff lightweight carbon chassis, and 120mm of ultra-efficient dw-link travel, means it’s equally happy popping off bonus lines as it is crushing all day epics. LONGER, SLACKER, STEEPER With its well bal­anced mod­ern geom­e­try, the Rip­ley is ready for any adven­ture. The long front end, slack head angle, and short rear end gives you the con­fi­dence to try new lines, while the steep seat tube angle and short­er off­set fork makes it easy to maneu­ver tech­ni­cal climbs and flowy singletrack. REVISED SWINGARM The Rip­ley V4S fea­tures a new UDH dérailleur for max­i­mum future com­pat­i­bil­i­ty and moves to a 55mm chain line. The wider chain line allows for a stiffer chainstay. DW LINK Since 2005, we’ve part­nered with sus­pen­sion guru Dave Wea­gle on the dw-link sus­pen­sion plat­form. It pro­vides an unpar­al­leled com­bi­na­tion of climb­ing effi­cien­cy and down­hill per­for­mance, that has been proven repeat­ed­ly at the high­est lev­els of racing." LONG DROPPER POST We use names like small, medi­um, and large to describe our siz­ing because it’s easy to under­stand, but our ultra low stan­dovers and clear­ance for long drop­pers give you the abil­i­ty to size based on reach. LIGHTWEIGHT PREMIUM CARBON, FOR EVERYONE Whether you order an XTR or NX kit, you’ll get the same pre­mi­um car­bon fiber frame. All our bikes are built from the high­est grade mate­ri­als and opti­mized for the best strength, weight, stiff­ness, and ride per­for­mance. The Rip­ley weighs 5 lbs with­out shock. FORK OFFSET Some­times, short­er is bet­ter. Instead of the typ­i­cal 51mm off­set, the new Rip­ley uses a 44mm off­set. This gives you the sta­bil­i­ty of a slack­er head angle, while retain­ing the BMX like feel of, well, a Ripley. 2.6" TIRE CLEARANCE We pio­neered the wide rim rev­o­lu­tion a few years ago and inspired a new crop of wider 2.4”—2.6” tires. When paired togeth­er, this com­bo can be run at ultra low pres­sures that pro­duce elbow-drag­ging cor­ner­ing trac­tion with­out sac­ri­fic­ing speed. REMOVABLE ISCG05 MOUNT There if you want it, remov­able if you don’t. INTERNAL CABLE TUNNELS Inter­nal cable rout­ing used to be a pain in the ass but our inter­nal tubes make rout­ing easy. Just pop the hous­ing through and it comes out the oth­er end, no need for swear words or a pickset. PROTECT YOUR INVESTMENT A thick rub­ber down­tube pro­tec­tor deflects debris, while our chain­stay pro­tec­tor fea­tures thick raised sec­tions to help damp­en chain slap noise. And our sim­ple-yet-ele­gant link­age pro­tec­tors stop mud and rocks thrown by the tire, keep­ing your beau­ti­ful bike beautiful.
$8,205.05 - $10,478.00 $9,653.00 - $10,478.00 Up to 15% Off
You’re not hanging up your wheels when the snow flies and you love the solitude of quiet winter adventures. This overlanding machine is built for you. Our 20+ year history of building fat bikes all comes together in a modern take in the Forager. The Forager is built to hold a 27.5 x 4.5’’ tire with plenty of room for icicles. Built with current fat bike standards such as 197 x 12 rear spacing, 120mm bottom bracket shell and 150 x 15 fork, this set up will stand the test of time. At the heart of the Forager is a proprietary double butted top and down tube in the largest diameters we’ve built from, giving us the strongest, stiffest and best tracking fat bike we have ever made. The Forager is not limited to just the cold surfaces, with bike packing and bike adventuring fitting right into its oversized wheel house. We’ve taken everything we’ve learned from building fat bikes for over 20 years and combined all of that knowledge into our most advanced offering in this category. The bottom line: Fresh snow, hard pack snow and deep winter adventures are at your beckon call. No surface should be left off the list with this beast of a bike. ***The large, Stanley finished Forager has been on a few test rides. Please confirm you're ok with that before ordering. FRAMESET SPECS - Head Tube: 44mm - Bottom Bracket: 120mm Threaded - Seatpost: 30.9mm - Thru-Axle Rear End Spacing: 197 x 12 - Post-Mount Disc: 160 or 180 rotor - Max Tire: 27.5 x 4.5" - Water Bottle Locations: 2 (small has 1) - Ring Capacity (single only): 30T - Derailleur hanger: Replaceable - Fork: Enve Fat Fork 150 x 15 - Chris King Matte Black headset - Matte Black seat tube collar - 3 Moots Ti Spacers 5mm, 10mm, 20mm ***************************************************************** Angry Catfish Bicycle is one of the largest Moots dealers in the country. We have many Foragers and other Moots coming in. Text, call, or email if you're considering a Moots. We may have the bike you're looking for coming and would love to help. *****************************************************************
$9,999.00 $9,999.00 - $10,299.00 Up to 3% Off
Power / Range / Capable, the three key features all rolled up into a sleek package ready to be set loose on any gravel road to be found. ************************************************************** Angry Catfish's website is tied into Moots available inventory. If you are visiting our store to view the bike, please contact us before coming, to ensure we have what you're looking for. ************************************************************** Legacy: The latest extension into the industry leading Moots gravel lineup, the Express takes inspiration from the Routt family all the way out to the adventure prowess that made the Baxter famous. The Express now goes to another level by adding power assist and extended range. Imagine being able to put the wind at your back no matter the direction, take the biggest hills and level them out, squeeze twenty miles in a limited window of daylight. All these dreams, and more, quickly become reality with the Moots Express. The Express now turns the most daunting bike rides into adventures that you can enjoy. Put a smile on your face, put the power in your legs, and set off to discover more by bike. Let the Express be the answer to explore more. Product Details We have taken our expansive history in gravel and brought forward a more capable and more powerful version of anything that we have ever made before. The Moots Express is a class 3, pedal assist e-bike all rolled up into a composite chassis. It starts off with a fully integrated cockpit via our MOD series stem, handlebar, and fork allowing all hoses and wires to be concealed neatly with the frame. The heart of the Express hinges around a state of the art Shimano EP801 drive unit which has the ability to keep adding assist all the way up to 28mph. Power comes from a 504Wh Shimano battery, so you can be confident that it will be safe, serviceable, and available for many years to come. The drivetrain consists of Shimano XT Linkglide components, specifically built for ebikes and specced for the gear range needed for gravel riding. The brakes/shifters are upsized Shimano Ultegra flat mount units that also operate the electronic shifting and assist control. Carbon, 25mm internal Shimano GRX wheels are wrapped with Panaracer 50c SK+ tires with room to spare. The Express has integrated fender mounts front and rear along with two bottle mounts in the front triangle, one being a three pack variant, and two three pack mounts on the fork. One on each leg. The battery is able to be charged within the frame via the charging door on the seat tube as well as the battery is easily removed out of the down tube through the one bolt battery access door. We tried to think of it all, keep it clean in the process, and make the user experience very intuitive along the way. Lifetime Warranty on Every Moots. Register your NEW Moots frame so we have your information on hand if a warranty issue ever arises. We also keep you up to date with new Moots product info, special offers and events.
$9,799.00
Pivot’s race-winning hardtail legacy takes a quantum leap forward with a lighter, faster and sharper-edged tool with only one goal in mind: getting from point A to point B as fast as possible. - Ultra-Featherlight Hollow Core Carbon Frame (800g) - Best-in-Class Stiffness to Weight Ratios - Lightweight Integrated Headset - New-school hardtail racing geometry - Low Standover - Internal Routing with Pivot Cable Port System - Pivot Dock Tool System Compatible, Under the Top Tube and Bottom Bracket - Featuring the easy to find UDH rear derailleur hanger for peace of mind when traveling SPECIFICATIONS - KIT: Team XX1 AXS - FRAME: LES SL Carbon - WHEEL SIZE: 29" - FORK: Fox Factory Stepcast 32 29" w/ Remote, 44mm offset, FIT4 - 100mm - HEADSET: Pivot Precision Sealed Integrated Cartridge - REAR DERAILLEUR: Sram XX1 Eagle AXS 12-Speed - CASSETTE: Sram XG-1299 10-52t - SHIFTER: Sram XX1 Eagle AXS 12-Speed - BRAKES: Sram Level Ultimate 2-piston - CRANKSET: Sram XX1 Eagle DUB SL 34t - HANDLEBAR: Phoenix Team Flat Carbon - 760mm - GRIPS: Phoenix Factory Lock-On - STEM: Phoenix Team XC/Trail - SEATPOST: Phoenix Team Carbon - SADDLE: Phoenix WTB Team Volt (Narrow Width) - WHEELS: Reynolds Blacklabel 309/289 XC w/ Industry Nine Hydra hub 30mm F 28mm R - 29" / 15x110 F/12x148 R - WHEEL MATERIAL: Carbon - TIRES: Maxxis Rekon Race 29" x 2.4" TR, EXO, 120 TPI - ROTOR: Sram CenterLine CenterLock - 160mm - CHAIN: Sram XX1 Eagle 12-Speed
$5,040.00 - $8,300.00
The GT-2 45 will delivers the riding experience you expect from a Mosaic, at a price point that rivals the plentiful mass-produced options that are available. Like every Mosaic, the GT-2 45 is built by our team of exceptionally skilled craftspeople here in Boulder, CO every step of the way from design, to framebuilding, welding and finishing. The GT-2 45 is designed around 45mm tires, meaning you’ll likely find yourself riding routes you never thought possible on a “road bike”, and trust us, that’s where the most fun is to be had! Frameset Features - Tubeset || T3A/2.5V Straight Gauge Titanium - Fork || Columbus Futura Cross + - Headset || Cane Creek 40 - Brake Mount || Flat Mount Disc - Brake Routing || Internal (External available upon request) - Axle Spacing || 12x100 Front // 12x142mm Rear - Bottom Bracket || Threaded English 68mm - Seatpost Diameter || 27.2mm - Front Derailleur Mount || Clamp On - Water Bottle Mounts || Two - Down tube and seat tube - Tire Clearance || 45mm - Chainline || Gravel Chainline (Must use SRAM XPLR, Force Wide or Shimano GRX. - Finish Options || Standard Raw Finish, Mosaic Paint Layouts - Sizing || 48, 50, 52, 54, 55, 56, 58, 60, 62 - Lead Time || 12 weeks
$5,040.00 - $8,300.00
Mixing design elements of traditional road and off-road frame specs, the GT-2 features Mosaic's straight gauge tubeset for comfort and compliance for a long day in the saddle. It is built on a flat mount disc brake platform for all-terrain stopping force and also creates clearance for a 38c tire. Titanium can take the abuse of riding all year, in any climate, without worry of corrosion or denting with minimal care. This base level model offers riders an opportunity to build their frame to their specification at an a la carte pricing model. Upgrades offered include fender and rack mounts, internal brake routing, routing for Di2 or EPS and upgraded finish options. Frameset Features - Tubeset || T3A/2.5V Straight Gauge Titanium - Fork || Columbus Futura Gravel - Headset || Cane Creek 40 - Brake Mount || Flat Mount Disc - Brake Routing || Internal (External Available upon request) - Axle Spacing || 12x100 Front // 12x142mm Rear - Bottom Bracket || Threaded English 68mm - Seatpost Diameter || 27.2mm - Front Derailleur Mount || Clamp On - Water Bottle Mounts || Two - Down tube and seat tube - Tire Clearance || 38mm (GT-2 AR) - Finish Options || Standard Raw Finish, Mosaic Paint Layouts - Sizing || 48, 50, 52, 54, 55, 56, 58, 60, 62 - Lead Time || 12 weeks
$5,040.00 - $8,300.00
The Mosaic GT-2 X doesn't just encourage you to take the path less traveled, it encourages you to ditch that path entirely and find a completely new, un-explored one. The GT-2 X uses our straight gauge titanium tubeset which has garnered a reputation for its comfortable ride quality and exceptional durability, both of which are extremely desirable characteristics of a bike as capable of exploration as this one. The GT-2X is designed around a 29x2.25 tire, mountain or gravel-specific groupset compatibility (Shimano GRX, SRAM XPLR or SRAM Force Wide), and geometry that incorporates a longer tube top and shorter stem. The GT-2X gives you the option to spec the frame for flat or drop bars, configuring it perfectly to your particular style. It's time to start planning your next adventure... Frameset Features - Tubeset || 3A/2.5V Straight Gauge Titanium - Geometry || 6 stock sizes, custom geometry available - Ergonomics || Drop Bar or Flat Bar - Groupset Compatibility || Gravel Group Only (or MTB) - Maximum Chainring Size || 42t (w/ gravel chainline crankset) - Tire Clearance || 29x2.25 - Fork || ENVE Adventure Fork - Headset || Cane Creek 40 - Brake Mount || Flat Mount Disc - Brake Routing || Internal - Shift Routing || Internal (Mechanical & Di2) or eTap - Axle Spacing || 12x100 Front // 12x142 Rear - Bottom Bracket || Threaded English 68mm - Seatpost Diameter || 27.2mm (30.9, 31.6 optional) - Front Derailleur Mount || None (1x only) - Water Bottle Mounts || Two - Down tube and seat tube - Finish || Mosaic Finishwork Program (Standard Raw Finish Included) - Lead Time || 12 weeks
$6,000.00 - $7,522.50 $8,850.00 Up to 32% Off
The Womble is for lovers of single-track and adventure. It’s a new bike for old souls. It’s a cult. It’s a Moots. Wake up ungodly early. Coffee, camelback, breakfast burrito, rain jacket and bike. No fresh tire tracks on the moist morning dirt, but dew dripping cobwebs, and rising mist surround. It doesn’t take long to feel the pulse pounding in your neck as you apply pressure up the first steep switchbacks. Soon, the trail opens. Keep those fingers off the brakes and trust in the bike as you let your muscles relax and float through a hoard of slate and limestone traps. The tread hums as speed turns to force and the traction over the rock-embedded trail blows dry fall leaves off every turn. Our passion for seeking pristine singletrack is instinctual and decades deep. It’s what keeps us going and has inspired our bikes since 1981. It’s strange to admit, but we press forward to satisfy our own passion for the trails that inspire us. We love simplicity, reliability and efficiency. Let’s skip the clichés and simply acknowledge that for us riding singletrack is mastery of up and down and our twisted obsession in balancing adventure and sheer speed between point to point. We don’t know what bucket to classify it, to us it’s just mountain biking. Moots was early to utilize the 29” wheel platform, and the Womble builds on that with a 29” specific geometry and ample clearance for 2.6” tires. We wanted a bike that tracked like nothing we’ve built before. The Womble boasts an all new and proprietary double butted top and down tube in the largest diameters we’ve ever built in order to create the stiffest and strongest front end possible. This gives strength to stretch the front center measurement and mate to 140mm travel fork, just to add a bit more reach. The Womble is a 1x specific frame and this one is built with Shimano’s value/performance monster XT 8100 1×12 gruppo and anchored with the Rock Shox Pike Ultimate 140 with 42mm offset that is simply the smoothest, stiffest and best tracking suspension we could mate the Womble to. Behind the Name – Womble We’ve been building bikes for almost 40 years at Moots and mountain bikes have been at the heart of what we do from the outset. The launch of our newest mountain bike, the Womble, is a tribute to the kind of riding we all love at Moots. Built as a cross country bike for both fun and long days in the saddle, we named this bike after the iconic Womble trail in Mt. Ida, Arkansas.
$4,500.00 - $7,500.00
The redesigned MT-2 is exactly the bike we wanted to ride. Designed, built, and tested in Boulder, CO, we recognized our desire for a fast and efficient, highly capable hardtail. The MT-2 is equally at home on the start line of a marathon mountain bike race, as it is on an all-day big mountain adventure or a weekend bike-packing trip in the desert. The MT-2 is designed with modern geometry and componentry in mind, making it the ultimate trail companion. Intended to be built with a 120mm suspension fork, and with ample clearance for 29x2.6 tires, the MT-2 is a modern XC hardtail, with a hint of rowdy trail shredding built in. A size-specific straight gauge titanium tubeset delivers a lightweight and exceptionally strong frameset that is built to be durable, comfortable, and exceptionally fun to ride. Batch Built in Mosaic Stock Geometry, a limited number of MT-2's are available now with delivery in 2-4 weeks pending finishwork selection. Frames can be configured one of two ways, with external full-length shift, brake, and internal dropper routing, or for eTap AXS shifting with a dropper port in the seat tube and external rear brake. All cables run externally through cable guides on the underside of the downtube. Made to order, custom MT-2's are also available through our normal build process and carry a 12 week lead time. Frameset Features - Tubeset || Size Specific T3A/2.5V Straight Gauge Titanium Tubeset - Geometry || Batch Built Mosaic Stock Geometry (Made to order custom geometry also available). - Tire Clearance || 29x2.6 - Chainline || Boost - Fork || Designed around 120mm, 44 offset suspension fork (Not included). - Headset || Cane Creek 40 (Chris King upgrade available) - Brake Mount || Post Mount 160mm - Brake Routing || External Downtube - Shift Routing || External Downtube or eTap AXS - Dropper Routing || Internal Seattube or eTap AXS - Rear Axle Spacing || Boost 12x148 - Bottom Bracket || Threaded English 73mm - Seatpost Diameter || 30.9 - Water Bottle Mounts || Three - Down tube, seat tube, under downtube. - Finish || Standard Raw Finish (included) or upgrade to Mosaic Paint Layout - Lead Time - Batch Built || 2-4 weeks pending finishwork selection? - Lead Time - Made to Order || 12 weeks (Made To Order)
$6,999.00
UNCOMPROMISING PERFORMANCE The all-new Mach 4 SL; a podium seeking missile crafted from the ground up as a testament to speed without compromise. designed to win gold and slaughter KOMs, and do so while delivering an otherworldly ride quality, telepathic handling, and a potent blend of acceleration and tractability. MORE FUN Not every day is race day. Sometimes our best races are with ourselves, racing itself should have some fun thrown in to buffer the suffering, the Mach 4 SL is as versatile as it is speedy. The World Cup build yields 95mm or 103mm of rear travel, easily adjusted via flip chip. The Trail build, aimed at squeezing as much fun as humanly possible while delivering either 106 or 115mm of rear travel via the Fox Float rear shock. - XC-Tuned DW-Link™ Suspension - New XC Adapted Travel-Adjustable Flip-Chip - Efficient Fox Factory Float DPS Shock on World Cup Builds with 95mm or 103mm Adjustable Travel - Versatile Fox Factory or Performance Float Shock Options on XC builds with 106mm or 115mm Adjustable Travel - Lighter, More Durable High-Load Enduro Max bearings - Size-Specific Carbon Layup Across Size Range - Low Standover Fits Riders 4'10" to 6' 7" - Large Water Bottle Clearance on All Sizes - Pivot's full carbon frames feature size-specific ride tuning, leading edge carbon fiber materials, and Pivot's proprietary hollow core molding technology to ensure that every rider from 4'10" to 6'7" has a bike that feels perfect and performs at the optimum level for their size. - Injection Molded Rubberized Frame Protection - Full Internal Routing with Pivot Cable Port System - Pivot Dock Tool System Compatible Under Top Tube and BB - Simplified Twistloc Suspension Lockout
$6,599.00 - $6,799.00
Take control. Don't accept compromises. Oiz isn't down-country or trail; this is a 120mm XC race machine that looks as good as it rides. Modern geometry and clever suspension, designed from the start around 120mm, bring extra fun to every ride without compromising weight or efficiency. Simply put, Oiz is the fastest XC bike to leave our factory in over 180 years. 120mm of Uncompromised Travel Historically choosing between 100mm and 120mm required a compromise; the control of 120mm or the weight and efficiency of 100mm. Oiz refuses to accept that compromise, designed from the start around longer travel but lighter and more efficient than ever. SIC System Our SIC system routes the cables along the best path through the headset, through internal guides and invisibly from the front to rear triangle via our Cable Pass. I-line Our patented I-line is simply the sleekest, most integrated shock lock-out on the market. You Can't Beat Simple Removing anything which is superfluous and only adding features which enhance the ride means that at 1740g Oiz is one of the lightest XC frames out there. Light weight is key for a fast XC bike and relentlessly pursuing the simplest solutions means Oiz doesn't need compromise anywhere else to achieve this.
$6,799.00
Evolution of a Classic This latest iteration of the Trail 429 is evidence of our constant quest for peak performance. We’ve broadened its capabilities without sacrificing its legendary sharpness: slackening the head angle just enough, increasing the reach, and introducing a flip-chip to allow fine-tuning of the geometry toward either the rowdy or racy ends of the spectrum. All-Star Suspension Is it possible for a bike to be both razor-sharp and butter-smooth? Yes. The Trail 429 is proof. In order to wring every drop of potential out of 120mm, we’ve reworked the already stellar dw-link suspension to provide a more bottomless feel and allow for a greater range of tunability. The Trail 429 combines rocket ship pedaling performance with a plushness that genuinely feels like more travel than the numbers indicate. Product Details: - Refined geometry exemplifies the pinnacle of modern race-to-trail performance - New, more progressive dw-link® prioritizes pedaling efficiency yet still rewards riders with plush, controlled travel - 120mm rear suspension travel featuring a vertical trunnion mounted high-volume air shock delivers unprecedented comfort and tunability - Flip chip adjustability allows riders to tailor geometry for either spirited all-round handling or a more progressive and rowdy demeanor - Hassle-free, full-length, internal cable routing with Pivot’s easy-to-service and ultra-quiet Pivot Cable Port System - Fits riders between 4’10” and 6’7” with X-Small to X-Large size offerings - Pivot’s full carbon frame features size-specific ride tuning, leading edge carbon fiber materials, and Pivot’s proprietary hollow core molding technology to ensure that every rider from 4’11” to 6’7” has a bike that feels perfect and performs at the optimum level for their size - Pivot Tool Dock system compatible with mounts under the top tube and integrated into the underside of the frame
$6,599.00
BUILT TO FLY -Take control. Don't accept compromises. Oiz isn't down-country or trail; this is a 120mm XC race machine that looks as good as it rides. Modern geometry and clever suspension, designed from the start around 120mm, bring extra fun to every ride without compromising weight or efficiency. Simply put, Oiz is the fastest XC bike to leave our factory in over 180 years.
$6,399.00
SHADOWCAT? YES, SHADOWCAT. Lithe, agile, sharp, fast and fun, the Shadowcat is a trail-carving expression of blazing speed and feline creative mayhem. Pivot's latest offering capitalizes on the acceleration and responsiveness of 27.5" wheels and acclaimed dw-link suspension to bring to life a bike that offers transformative capability for riders of every stripe. LITHE A new frame that weighs less than our impressively light Trail 429 frame. Heck, this frame weighs only 45 grams more than our featherlight Mach 4SL. We're replacing the beloved Mach 5.5 with a 140mm ripper of a bike that weighs less than many dedicated XC machines. Super-low standover; small kittens and playful cats rejoice! - Ultra-Light Hollow Core Carbon Frame. - Class-Leading Strength to Weight Ratio. - Seamlessly Integrated Headset Cups save weight and ensure easy service. - Excellent Standover height for all sizes. - Custom-tuned Fox Live Valve builds allow for layers of tuning to allow for a plusher than plush feel unmatched by any other suspension setup. - 140mm of supple-yet-efficient dw-link™ suspension travel featuring a vertically mounted trunnion metric air shock. - Equipped with a 44mm offset 160mm-travel Fox 36 fork. - Agile and playful 27.5" wheels with tires up to 2.4" - Long and low modern geometry for a confident ride. - Short 430mm Chainstays for snappy cornering. - Large Water Bottle Clearance on all sizes. - Pivot Tool Dock system compatible with mounts under the top tube and integrated into the underside of the frame. - Hassle-free full internal routing with Pivot cable port system. - Featuring the easy to find UDH rear derailleur hanger for peace of mind when traveling the world.
$4,479.30 - $6,199.00 $6,199.00 - $6,399.00 Up to 30% Off
The sequel to the Switchblade story heralds a new era of all-mountain riding, with more travel, unrivaled versatility and progressive geometry. It unleashes dominance over enduro inspired descents, generates speed, and delivers the finesse needed for power moves on technical climbs. With a masterfully designed new dw-link shock layout, riders can optimize suspension performance like never before. The all-new Switchblade cleans the impossible, threads the needle, and delivers the freedom to explore. From bike park flow trails to raw backcountry routes, the Switchblade amplifies every rider's skills and excels on any trail. - Ultra-light, size-specific optimized full Hollow Core Carbon frame featuring leading-edge carbon fiber materials and Pivot's proprietary molding technology for a lighter frame and higher stiffness to weight ratio - Ultra-adjustable custom-tuned Fox DPX2 rear shock with all-new internals - Compatible with both 29, 27.5+" and 27.5+" rear/29" front (reverse mullet) wheel sizes without compromise thanks to the adjustable geometry - 142mm of supple-yet-efficient dw-link suspension - Large water bottle fits inside all size frames - Fits tires up to 29x2.6" or 27.5x2.8" wide - Full Fox Live Valve integration and build options - Progressive geometry with short seat tubes for long travel dropper posts. - Hassle-free, full-length, internal cable routing with Pivot's easy to service and silent Cable Port System - Equipped with a 44mm offset 160mm-travel Fox 36 FIT Grip2 Factory and Performance Series forks - Flip-chip upper linkage mount for adjustable geometry in seconds - Fits riders between 5' and 6'7"
$5,999.00 - $6,199.00
The Trail 429 might well be the perfect category defying trail bike. Progressive geometry and super capable suspension give hard charging riders the tools they need to thrive in jumpy and steep terrain. 120mm of travel has never felt this plush or this composed. This very same super-refined dw-link suspension also delivers whip-crack pedal response and acceleration, aided and abetted by the strongest, lightest carbon fiber chassis we've ever developed. The sharp-end of the stick XC capability of this bike is eye-opening, on par with dedicated flyweight race bikes. This is a bike that you can shred with confidence everywhere from 24-hour race courses to untamed high alpine singletrack. - Refined geometry exemplifies the pinnacle of modern race-to-trail performance - New, more progressive dw-link prioritizes pedaling efficiency yet still rewards riders with plush, controlled travel - 120mm rear suspension travel featuring a vertically trunnion mounted high-volume air shock delivers unprecedented comfort and tunability - Flip chip adjustability allows riders to tailor geometry for either spirited all-round handling or a more progressive and rowdy demeanor - Hassle-free, full-length, internal cable routing with Pivot's easy to service and ultra-quiet Pivot Cable Port System - Fits riders between 4'10" and 6'7" with X-Small to X-Large size offerings - Pivot's full carbon frame feature size-specific ride tuning, leading edge carbon fiber materials and Pivot's proprietary hollow core molding technology to ensure that every rider from 4'11" to 6'7" has a bike that feels perfect and performs at the optimum level for their size - Pivot Tool Dock system compatible with mounts under the top tube and integrated into the underside of the frame
$5,999.00
Tributary is Salsa's electric rugged-road adventure bike. It's built to devour big, burly dirt routes. Tributary's well-balanced gravel geometry, massive tire clearance, and suspension fork mean total comfort and control on sketchy surfaces — even at ebike speeds. The BOSCH Performance Line Speed motor empowers riders to tackle demanding bikepacking routes, explore vast networks of forest roads, or add miles to any adventure. Pair all that with Salsa's on-bike cargo features, and Tributary is ready to take riders from their front door to far-out. - 6061-T6 aluminum frame - Boost suspension fork - BOSCH Performance Line Speed class 3 mid-drive motor with smart system - 28 mph or 45 km/h max assist - 85 Nm max torque - 625 watt-hour (Wh) Bosch PowerTube internal battery - Compatible with Bosch range extender battery (sold separately) - Class 5™ VRS - Internal dropper post-routing - Internal cable routing with port for integrated lighting system - 148 x 12 Boost thru-axle rear - SRAM UDH compatible - Fender mounts and rear rack mounts - Compatible with direct-mount frame bags - Two bottle mounts inside main triangle on all sizes - Accommodates up to 29 x 2.8" front, 2.6" rear tires
$5,849.10 $6,499.00 10% Off
This is the go-to drop bar bike for daily usage as well as all of your endurance riding. ************************************ We have S, M, L, XL frame sizes in stock and can build up a bike similar to this or whatever your dream bike is. ****************************************** The Earth Ship is our dream handbuilt USA-made gravel race / all-road bike that can also flex into bike packing. It is light, nimble, capable, and most importantly comfortable for very long days in the saddle. As we’ve gotten less self-conscious and more independent-minded we’ve come to embrace taller stack heights as the future of endurance riding. One of our goals with the Earth Ship was to create a bike that looked as aesthetically pleasing as possible with high handlebars. When it comes to endurance riding, we believe that “comfortable is fast!” You’ll find a full suite of features that include: - Three bottle mounts, top tube bag mount, and fender mounts. - The frame is built around the incredible Enve Adventure fork which has three-pack mounts on each leg and internal dynamo and brake routing. - For cable management on the frame we’ve chosen to use Paragon’s modular system which allows the cleanest possible appearance and can be customized for AXS, 1X or a traditional two derailleur setup. We use full round cable guides on the stays as we find plastic zip ties on high-end bikes to be an inelegant compromise. - Clearance for 700 X 50c or 650b X 2.2" tires GEOMETRY Gravel Race Geo with all-day comfort and bump absorption at the forefront. The tall stack, a slightly lowered bottom bracket, and generous stays yield an unbelievably smooth ride and inspire confidence when descending fast over loose terrain. A fairly traditional head tube and seat tube angle keeps everything quick and maneuverable, we favor trail numbers in the 60’s as we want an agile and responsive front end. TUBING A mix of Reynolds 853 and Columbus Life for the top and downtube. The seat stays and seat tube are custom designs from Fairing and the tapered head tube and chainstays (also a proprietary design) are sourced from Nova Cycles. FRAME SPEC - Handbuilt in USA - Enve Adventure Fork - Includes copper, handcrafted, Jen Green headbadge - Clearance for 700 X 50c or 650b X 2.2" - Three bottle mounts - Top tube feedbag mount - Fender mounts - Tapered head tube with external cup: EC34/44 - 68mm bottom bracket shell - Flat mount - Thru Axle - Rear Thru Axle M12 X 1.5 - Derailleur Hanger: Paragon B4085 - Seatpost: 27.2mm - Seat Collar: 30.8 - Cable Guides: Paragon under the downtube modular and full ring guides on the stays (No Zip Ties)
$5,599.00
Dominant Speed Rip through the field with dominance usually reserved for fighter jets and bullet trains. The LES SL's modern, progressive geometry and innovative carbon science provide the ideal vertical compliance and liveliness to launch you at the starting line and propel you late in the race. LES is More The LES is more of everything you want and need in an ultra-lightweight hardtail: performance, compliance, and speed. Designed to achieve one of the lightest production hardtail frames in the world at just over 800 grams for a medium; the LES SL's featherlight status is the result of years of research. In that regard, the LES is also less: less weight, less resistance, and fewer unnecessary grams. Product Details: - Ultra-Featherlight Hollow Core Carbon Frame (800g) - Best-in-Class Stiffness to Weight Ratios - Lightweight Integrated Headset - New-school hardtail racing geometry - Low Standover Fits Riders 4'10" to 6'7" - Internal Routing with Pivot Cable Port System - Pivot Dock Tool System Compatible, Under the Top Tube and Bottom Bracket - Featuring the easy-to-find UDH rear derailleur hanger for peace of mind when traveling
$5,499.00
DOMINANT SPEED Rip through the field with dominance usually reserved for fighter jets and bullet trains. The LES SL’s modern, progressive geometry and innovative carbon science provides the ideal vertical compliance and liveliness to launch you at the starting line and propel you late in the race. THE FASTEST HARDTAIL WE’VE EVER BUILT The new LES SL’s geometry features longer reaches and a slacker head angle, leading the pack in a new era of racing hardtails; one that brings a heightened level of capability and aggression to the XC category. PRODUCT DETAILS Get everything you need to know about the Les SL. - Ultra-Featherlight Hollow Core Carbon Frame (800g) - Best-in-Class Stiffness to Weight Ratios - Lightweight Integrated Headset - New-school hardtail racing geometry - Low Standover Fits Riders 4’10” to 6’ 7” - Internal Routing with Pivot Cable Port System - Pivot Dock Tool System Compatible, Under the Top Tube and Bottom Bracket - Featuring the easy to find UDH rear derailleur hanger for peace of mind when traveling
$5,499.00
Warroad C Rival eTap AXS is the cure for the common road bike. The stiff, lightweight carbon frameset with Class 5 VRS and our endurance road geometry blends performance for spirited riding with comfort for long days in the saddle on any road surface — it's our best bike for gravel and road riding. Extra mounts on the frame and fork hold everything you need for long days out. Dual wheel size compatibility lets you run up to 700c x 35 mm or 650b x 47 mm wheels and tires, and SRAM's Rival eTap AXS drivetrain feels superb and performs flawlessly, no matter where your wanderings take you.
$5,380.00
The Waheela C is a carbon-framed drop bar bike with an adjustable geometry, unrivaled ride quality, and enormous tire clearance for 700c x 54mm, 650b x 54mm, or 29" x 2.1" tires. It has extra frame and fork mounting points for bottles and racks, easily accessible internal cable routing options, compatibility for 1x or 2x electronic or mechanical drivetrains, and the ability to run a dropper post. No matter the road ahead (or under tire), the Waheela C is ready. ************************************************************** Angry Catfish's website is tied into Otso's available inventory. If you are visiting our store to view the bike, please contact us before coming, to ensure we have what you're looking for. ************************************************************** GIANT TIRE CLEARANCE Gravel comes in all shapes and sizes, from the packed limestone of Southeast Minnesota to the chunky roads of the Flint Hills of Kansas. The Waheela C is equipped with tire clearance to handle the terrain of your next race. Where most gravel bikes can fit 650b x 50mm but only 40mm with bigger wheels, the Waheela C keeps on rolling, with space for 700c x 54mm tires. It'll run 700c x 35mm when the roads are tacky and tidy, 700c x 42mm when there's a bit more uncertainty, 700c x 54mm when the gravel road turns to ATV trails, and anything in between. The Waheela C can also fit 29" x 2.1", 27.5" x 2.1", or 650b x 54mm if 700c isn't really your thing. In short, the Waheela C is ready for the road ahead. ADJUSTABLE GEOMETRY Like all Otso bikes, the Waheela C sports our patented Tuning Chip rear dropout system, which allows you to change the length of your wheelbase and height of your bottom bracket. Put the Tuning Chip in the back position to get the stability and comfort of a longer wheelbase for a full day of riding gravel. Switch to the front position to get the agile handling and responsiveness required by your next CX race. And the middle position? That's the best of both worlds. The adjustable geometry of the Waheela C allows you to ride any road or any trail without needing to switch bikes. UNRIVALED RIDE QUALITY Our proprietary Waheela geometry was developed by our engineers for stability, confidence, and comfort on rough terrain. Where many gravel bikes put extra weight on the front wheel, the Waheela C centers the rider over both wheels. This makes for a more stable ride while allowing the compliant rear triangle to come into play and absorb the bumps of a gravel road. Meanwhile, the lightweight EPS molded carbon frame adds responsiveness and readiness for a sprint up that next hill. After a long day on the saddle, you'll find yourself adding a healthy amount of miles to tomorrow's ride. EXTRA MOUNTING POINTS Waheela C features fork bottle bosses, extra down tube mounting points (6 total), as well as top tube gas tank mounting points. Numerous braze-ons allow Waheela C to accommodate water bottles, fenders, racks, frame bags, and more. DETAILS THAT MATTER Internal brake and shifter routing with sleeves, carbon access door under bottom bracket for easier routing, front and rear thru-axle, and threaded bottom bracket for reliable, easy service. This also allows you to run that dropper post you've been dreaming about. COMPATIBLE WITH 1X OR 2X Waheela C is 1x and 2x compatible with mechanical and electronic drivetrains. It's also fully compatible with both Shimano Di2 and SRAM eTap AXS, in case you don't want to take advantage of internal routing options. QUALITY ASSURED Designed by the Otso engineering team, Waheela C frames are manufactured in one of the premiere carbon fiber factories in Taiwan and come with a 5 year limited warranty. All bikes are inspected and assembled at our headquarters in Minneapolis, MN USA.
$5,150.00
Voytek 2 takes what the original Voytek started and makes it better. This is a fat bike that rides like a mountain bike on snowy trails. We overhauled Voytek geometry to give you a fat bike that lets you go even faster with more confidence. Voytek 2 has adjustable geometry via the patented Tuning Chip dropout system like all Otso bikes, as well as the new GeoChip head tube system that alters geometry at the front end of the bike. It has clearance for 26” x 4.6” or 27.5” x 4.5” tires, suspension correction for a suspension fork, internal cable routing, lower standover, and several more updates. When the snow melts, swap in a 29” plus wheelset to keep the party going all year. Voytek changed the world of fat bikes when we announced it in 2016. Voytek 2 is here to do it again. ************************************************************** Angry Catfish's website is tied into Otso's available inventory. If you are visiting our store to view the bike, please contact us before coming, to ensure we have what you're looking for. ************************************************************** Narrow Q factor Voytek 2 feels more like riding a mountain bike than a bike built for 26" x 4.6" tires because it has a narrow Q factor. The Q factor of a bike is the distance between the outer surfaces of your two crank-arms. The narrower the Q factor, the more natural it feels to pedal and handle the bike because it is closer to your normal biomechanics. It also allows for stronger power transfer to the pedals, more efficient pedaling, and increased overall performance. Adjustable Geometry When pairing the GeoChip head tube system with the Tuning Chip rear dropout system, Voytek 2 geometry has unprecedented adjustability. Pair a long wheelbase with a slack head tube angle for a stable ride in deep snow. Pair a short wheelbase with a steeper head tube angle for a responsive ride on packed, tacky snow. Or mix and match based on your riding style. Customize Reach and Head Tube Angle GeoChip is a new integrated system that allows you to adjust reach and head tube angle. Three sets of flip chips nest in the frame and hold the headset upper and lower cups. One set of GeoChip flip chips allows for +/- 10mm of reach adjustment, another allows for +/- 1º of head tube angle adjustment, and the third allows for +/- 2º of head tube angle adjustment. This means that you can easily adjust your reach or head tube angle at home based on the riding ahead. With two reach options for each bike due to GeoChip, Voytek 2 effectively has eight frame sizes. Tuning Chip Rear Dropout System All Otso bikes are equipped with adjustable geometry via our patented Tuning Chip rear dropout system. The Tuning Chip can adjust the wheelbase by up to 20mm, raise or lower the bottom bracket by up to 4mm, and adjust the head tube angle by +/- 0.5º. With the machined aluminum flip chip in the rear position, Voytek 2 has a longer wheelbase, lower bottom bracket, and slacker head tube angle for confidence and stability in deeper snow. Use the front position for more responsive handling on packed trails with tight turns. A middle position chip pairs the best of both worlds. Tire Clearance and Wheel Swapping Voytek 2 can fit 26” x 4.6” or 27.5" x 4.5" tires on the stock rims. A full breakdown of tire/rim pairings can be found below in the Tech Specs. To achieve this wide tire clearance with an extremely narrow bottom bracket, the rear hub has a 5mm outboard offset to prevent chain rub. Voytek 2 can also fit 29” x 3.0” tires. So when the trails are packed with snow, ride 26” x 4.0” tires, then when the snow melts and the trails turn to dirt, swap in your 29” wheelset for plus mountain bike riding. Voytek 2 was designed to accommodate multiple wheel sizes without compromising ride quality. Modern MTB Geometry Voytek 2 builds on the geometry that we pioneered with our original Voytek. We gave Voytek 2 a slacker head tube angle, steeper seat tube angle, shorter standover. This updated geometry allows you to go faster with more confidence. Suspension Correction Voytek 2 is suspension corrected. This means that you can build it with a 120mm travel suspension fork without drastically changing the geometry of the bike with a rigid fork. Dropper Compatibility Dropper post routing has a fully internal sleeve via a port behind the head tube. The Wolf Tooth Resolve Dropper Post is an option on the Voytek 2 Custom Bike Builder. Large Front Triangle A larger front triangle means that you can fit more cargo for your ride. Use this space for a custom frame bag, two bottles, or anything else that you need to carry for the ride ahead.
$5,120.00
Fenrir isn't your typical mountain bike. This one was designed from the trail up for bikepacking. Where most bikes can feel wobbly when loaded with a week's worth of gear, Fenrir rides confident and strong as ever. Build it with drop bars or flat bars, suspension fork or rigid fork, dropper post or rigid seatpost, gears or single speed, and a mechanical or electronic drivetrain. A tire clearance of 29” x 2.6” or 27.5” x 2.8” keeps the Fenrir rolling on rough terrain, while extra frame and fork braze-ons are ready to carry gear for days or weeks on the trail. Like all Otso bikes, the Fenrir has adjustable geometry via the patented Tuning Chip rear dropout system that makes the bike as adaptable as its rider. ************************************************************** Angry Catfish's website is tied into Otso's available inventory. If you are visiting our store to view the bike, please contact us before coming, to ensure we have what you're looking for. ************************************************************** DESIGNED FOR BIKEPACKING Every last feature of Fenrir Ti is optimized for bikepacking. The titanium frame is strong, smooth, and lighter than steel. It can be built with flat bars or drop bars depending on your affinity for large handlebar rolls. Single speed is an option for folks who like simplicity while touring. It has extra mounts on the frame and fork for hauling all the gear you'll need for days (or weeks) on the trail. The frame and fork can clear 29" x 2.6" or 27.5" x 2.8" tires for trails that are especially gnarly. No matter your destination and how long it takes to get there, Fenrir Ti is ready. VERSATILITY While all Otso bikes are known for their versatility, the Fenrir might be the most versatile yet. It was designed to accommodate drop bars with a 50mm stem or MTB bars with an 80mm stem. It can be build with gears or single speed, with a suspension fork or rigid, with a mechanical or electronic drivetrain, or with a dropper or rigid seat post. The ability to fully customize the build of the bike makes the Fenrir as versatile as its rider. FENRIR WITH FLAT BARS When built with MTB bars, Fenrir rides like a 90s XC bike. It's fun and lively, yet efficient and Capable with a capital C. It can handle any sketchy descent or technical climb with ease. Because the top tube is relatively short for a mountain bike, a longer stem (80-90mm) is ideal for maintaining reach. Ride it on your local singletrack or load 'er up for that backcountry tour that you've been dreaming about –you know the one. However you choose to build it, Fenrir will ride any road/trail on the map and carry all the gear to get you there. FENRIR WITH DROP BARS Fenrir was designed with the option to be built with drop bars or MTB bars. When configured with drop bars, the Fenrir rides like an extra-capable gravel bike. The relatively longer top tube means a shorter stem is needed with drop bars to align with the rider's preferred reach. It can be built with standard road/CX/gravel bars for rides on local trails or with wider bars to fit a handlebar roll loaded with lots of gear. SO MANY MOUNTS A bikepacking bike needs to be able to carry all the gear for days or weeks on the trail. Fenrir has mounts for bottles, fenders, and racks. The Enve fork also has three-pack mounts on either side for sharing the load. CAPABLE GEOMETRY Pick a trail on the map and ride it. Fenrir has the endurance of a gravel bike, with the stability of a mountain bike. Above all, it is Capable with a capital C so you can stay the course and reach your destination. DROPPER FRIENDLY A small port near the bottom of the seat tube allows for the cable routing of a dropper post. If you don't ride with a dropper, you probably won't even notice the port. AMPLE CLEARANCE Tires need to meet demands of the trail for traction, stability, and comfort. Fenrir can ride up to 29" x 2.6" or 27.5" x 2.8" tires. SINGLE SPEED All metal Otso bikes have the option to be built single speed or with gears. Fenrir is included in that group because it has a small notch on the rear dropout near the Tuning Chip. If you build your Fenrir with gears, but want to convert to single speed later on, we have the single speed Tuning Chip available on our website alongside other accessories. There's no wrong way to build your Fenrir.
$5,120.00
Fenrir isn't your typical mountain bike. This one was designed from the trail up for bikepacking. Where most bikes can feel wobbly when loaded with a week's worth of gear, Fenrir rides confident and strong as ever. Build it with drop bars or flat bars, suspension fork or rigid fork, dropper post or rigid seatpost, gears or single speed, and a mechanical or electronic drivetrain. A tire clearance of 29” x 2.6” or 27.5” x 2.8” keeps the Fenrir rolling on rough terrain, while extra frame and fork braze-ons are ready to carry gear for days or weeks on the trail. Like all Otso bikes, the Fenrir has adjustable geometry via the patented Tuning Chip rear dropout system that makes the bike as adaptable as its rider. ************************************************************** Angry Catfish's website is tied into Otso's available inventory. If you are visiting our store to view the bike, please contact us before coming, to ensure we have what you're looking for. ************************************************************** DESIGNED FOR BIKEPACKING Every last feature of Fenrir Ti is optimized for bikepacking. The titanium frame is strong, smooth, and lighter than steel. It can be built with flat bars or drop bars depending on your affinity for large handlebar rolls. Single speed is an option for folks who like simplicity while touring. It has extra mounts on the frame and fork for hauling all the gear you'll need for days (or weeks) on the trail. The frame and fork can clear 29" x 2.6" or 27.5" x 2.8" tires for trails that are especially gnarly. No matter your destination and how long it takes to get there, Fenrir Ti is ready. VERSATILITY While all Otso bikes are known for their versatility, the Fenrir might be the most versatile yet. It was designed to accommodate drop bars with a 50mm stem or MTB bars with an 80mm stem. It can be build with gears or single speed, with a suspension fork or rigid, with a mechanical or electronic drivetrain, or with a dropper or rigid seat post. The ability to fully customize the build of the bike makes the Fenrir as versatile as its rider. FENRIR WITH FLAT BARS When built with MTB bars, Fenrir rides like a 90s XC bike. It's fun and lively, yet efficient and Capable with a capital C. It can handle any sketchy descent or technical climb with ease. Because the top tube is relatively short for a mountain bike, a longer stem (80-90mm) is ideal for maintaining reach. Ride it on your local singletrack or load 'er up for that backcountry tour that you've been dreaming about –you know the one. However you choose to build it, Fenrir will ride any road/trail on the map and carry all the gear to get you there. FENRIR WITH DROP BARS Fenrir was designed with the option to be built with drop bars or MTB bars. When configured with drop bars, the Fenrir rides like an extra-capable gravel bike. The relatively longer top tube means a shorter stem is needed with drop bars to align with the rider's preferred reach. It can be built with standard road/CX/gravel bars for rides on local trails or with wider bars to fit a handlebar roll loaded with lots of gear. SO MANY MOUNTS A bikepacking bike needs to be able to carry all the gear for days or weeks on the trail. Fenrir has mounts for bottles, fenders, and racks. The Enve fork also has three-pack mounts on either side for sharing the load. CAPABLE GEOMETRY Pick a trail on the map and ride it. Fenrir has the endurance of a gravel bike, with the stability of a mountain bike. Above all, it is Capable with a capital C so you can stay the course and reach your destination. DROPPER FRIENDLY A small port near the bottom of the seat tube allows for the cable routing of a dropper post. If you don't ride with a dropper, you probably won't even notice the port. AMPLE CLEARANCE Tires need to meet demands of the trail for traction, stability, and comfort. Fenrir can ride up to 29" x 2.6" or 27.5" x 2.8" tires. SINGLE SPEED All metal Otso bikes have the option to be built single speed or with gears. Fenrir is included in that group because it has a small notch on the rear dropout near the Tuning Chip. If you build your Fenrir with gears, but want to convert to single speed later on, we have the single speed Tuning Chip available on our website alongside other accessories. There's no wrong way to build your Fenrir.
$5,039.10
Challenging environments and heavy loads are no match for the uncompromising and award winning Boost E. This compact and extremely sturdy Etility bike is always ready for the next adventure-close to home or far from civilization. They're the choice of everyday suburban explorers, adventurists, bike couriers and professional rescue teams. The powerful and efficient Bosch Performance 250W, motor with 65Nm of torque assists you up to 20Mph. The unique upright riding position and ergonomic handlebar design lets you ride with purpose without sacrificing comfort and maneuverability. And a smart, interchangeable rack and rail system lets you pick and choose from dozens of possible configurations to suit the mission. - Bosch Performance Sport 250W, 65Nm, GEN 3, 20mph - Bosch Powerpack 400Wh Lithium-Ion Battery - Bosch Purion On-Board Computer (5 Riding Modes) - Thru Axle Wheels and Magura Hydraulic Brakes - German Supernova Mini 2 Front and E3 Rear Lights - Multifunction Rear Rack (Max. Load 130lbs/60kg) - Secure Yepp Baby Seat Installation (2 Seats) - One Frame Size (Fits Riders From 5'1" to 6'3")
$5,039.10 $5,599.00 10% Off
Challenging environments and heavy loads are no match for the uncompromising and award winning Boost E. This compact and extremely sturdy Etility bike is always ready for the next adventure-close to home or far from civilization. They're the choice of everyday suburban explorers, adventurists, bike couriers and professional rescue teams. The powerful and efficient Bosch Performance 250W, motor with 65Nm of torque assists you up to 20Mph. The unique upright riding position and ergonomic handlebar design lets you ride with purpose without sacrificing comfort and maneuverability. And a smart, interchangeable rack and rail system lets you pick and choose from dozens of possible configurations to suit the mission. - Bosch Performance Sport 250W, 65Nm, GEN 3, 20mph - Bosch Powerpack 400Wh Lithium-Ion Battery - Bosch Purion On-Board Computer (5 Riding Modes) - Thru Axle Wheels and Magura Hydraulic Brakes - German Supernova Mini 2 Front and E3 Rear Lights - Multifunction Rear Rack (Max. Load 130lbs/60kg) - Secure Yepp Baby Seat Installation (2 Seats) - One Frame Size (Fits Riders From 5'1" to 6'3")
$5,039.10 $5,599.00 10% Off
Challenging environments and heavy loads are no match for the uncompromising and award winning Boost E. This compact and extremely sturdy Etility bike is always ready for the next adventure-close to home or far from civilization. They're the choice of everyday suburban explorers, adventurists, bike couriers and professional rescue teams. The powerful and efficient Bosch Performance 250W, motor with 65Nm of torque assists you up to 20Mph. The unique upright riding position and ergonomic handlebar design lets you ride with purpose without sacrificing comfort and maneuverability. And a smart, interchangeable rack and rail system lets you pick and choose from dozens of possible configurations to suit the mission. - Bosch Performance Sport 250W, 65Nm, GEN 3, 20mph - Bosch Powerpack 400Wh Lithium-Ion Battery - Bosch Purion On-Board Computer (5 Riding Modes) - Thru Axle Wheels and Magura Hydraulic Brakes - German Supernova Mini 2 Front and E3 Rear Lights - Multifunction Rear Rack (Max. Load 130lbs/60kg) - Secure Yepp Baby Seat Installation (2 Seats) - One Frame Size (Fits Riders From 5'1" to 6'3")
$4,999.00 $5,999.00 17% Off
HE TRUSTY TOOL FOR ANY TRAIL Like the reliable tool you grab for every job, the Smuggler is the go-to bike for any trail pointed up, down, and all around. With dual 29 inch wheels, 130mm rear and 140mm front travel, the Smuggler may just be the most versatile bike in our lineup. A highly progressive leverage curve and comfortable, confidence-inspiring geo make it eager to keep going mile after mile while remaining surefooted in even the most technical terrain. Sitting squarely between the Spur and Sentinel in travel, geometry, and capability, it shares qualities of both. Inspiring and rewarding to hammer on your favorite singletrack, while never holding you back when the trail gets steep, the Smuggler will make sure you enjoy it all.
$4,999.00
The All-Country Bike Effortlessly explore, seek, and pursue the mountain in ways you never imagined. The Spur provides a sense of connection to the trail as if it were an extension of your own body. Allowing you to be fast and efficient with an anti-gravity feel and laser-pointer precision. It begs you to climb more, go farther, and descend anything you may encounter along the way. You're rewarded with free speed as every pump and pedal stroke propels you forward while our SBG Geometry makes sure you're composed for every root, rock or switchback. Don't judge a book by its cover though, with all these lightweight and uphill oriented character traits the Spur requires no adjustment to descend like you're used to, you might actually go faster. Speed Balanced Geometry SBG ensures the bike maintains low speed agility, front wheel traction, and proper rider weight balance while actually increasing confidence in steep terrain and at high speeds. With SBG, a slacker head tube angle is combined with a reduced offset fork standard, preventing the front wheel from being too far in front of the rider. This improves front to rear weight distribution on the bike, which is often out of balance on long and slack bikes. One of SBG's greatest benefits is that it creates a confident steering feel that adapts to wheel speed. More stability when going fast, more agility on technical slow speed maneuvering as well as improved traction, control and confidence for any skill level of rider. Giddyup Suspension Design We want to make it as easy as possible to experience great rear suspension performance. The GiddyUp suspension system is designed to behave intuitively across a broad range of setup. Because, we get it, sometimes you just want to grab your bike and GiddyUp, without checking your setup. When you do, it will always feel good. With nearly 30% of progression and a consistent linear rate of change, the Spur has an excellent balance of support and small bump sensitivity. Anti-squat is tuned to enhance pedaling performance and acceleration but doesn't get in the way of the suspension working when it's needed. The GiddyUp suspension, featuring a one-piece flex stay rear triangle, is tuned to work correctly with inline style rear shocks and designed to provide a balanced feel with 120mm travel forks. Riders are able to add or remove volume spacers in the rear shock to suit their individual riding style and there is plenty of bottom out control for when things get rowdy. The Spur has 120mm of rear wheel travel when used with the supplied 190mm x 45mm stroke shock. It is also possible to install a shorter, 190mm x 37.5mm stroke shock, to reduce the rear wheel travel to 100mm if you are after a shorter travel experience. A wide usable sag range of 25 - 35% allows the rider to tune the feel of the bike; from firm and snappy, to more supple and active. Wherever you end up, you can focus on the trail without remotes, levers or knobs. Just grab your bike and GiddyUp.
$4,949.10 $5,499.00 10% Off
Timberjack is Salsa's aggressive trail hardtail. Its progressive trail geometry is stable on descents and technical sections, while the Alternator 2.0 dropouts allow for adjustable chainstay length to dial in ride characteristics. Ample accessory mounts and dual wheel size compatibility add more versatility to the package, making Timberjack a well-rounded ripper that likes to party.
$4,799.00
Skid Loader is a compact electric cargo bike wired for large loads, small footprints, and everyday deviant behavior. Just as Easy, Not as Big Cutting back on car trips is a worthy undertaking, especially in these times of planetary peril. With its electric-assist motor and extreme hauling capabilities, our compact electric cargo bike Skid Loader invites those inclined to throw a leg over and wave their middle digits at downtown gridlock. Built for finding more ways to drive less and ferrying various materials to work, play, or wherever, we gave Skid Loader the utility of a long-tail and a manageable footprint that fits wherever a normal bike does. Comfortable and compliant under load, Skid Loader also enjoys cutting loose without cargo. Engineered to ride and feel like a regular bike, its 27.5" wheel platform provides abundant tire options you don't get from cargo bikes rolling on smaller wheels. And because it's a Surly, we gave it ample tire clearance and built it for commutes that go from bus stop to bandit trail. We also gave all three frame sizes adequate standover and a dropper post to fit riders of assorted shapes and sizes. Furnished with useful accessory barnacles and internal routing for just about everything, Skid Loader's scaled-down and feature-packed cargo frame removes the roadblocks between you and riding whenever the hell you want. - Equipped with Bosch Performance Cargo Drive Unit, featuring four invigorating levels of ride assist - Capable of running dual batteries for extended range (all mounting hardware and wiring included) - Dedicated rear rack rated for 100 pounds of potatoes, thanks to beefed-up M6 hardware - Internal cable routing for dropper post, brake, shifter, and lights - Mounts for fenders, front rack, and bottle cages (two on Medium and Large, one on Small) - Stable dual-leg kickstand for your loading convenience - Compatible with Surly Excellent Adventure rear axle for use with Surly Bill and Ted Trailers; accommodations for human cargo - Sturdy, full-size wheels and large-volume 27.5 x 2.5" ExtraTerrestrial tires
$4,769.10 $5,299.00 10% Off
Modern Endurance Steel Road Bike Our answer to what a modern road bike should be, the Zig Zag is a ripping-fast and efficient machine built to help you go farther, faster, and have more fun. Speed, Comfort, and Standout Style The Zig Zag is designed to keep riders feeling strong from golden-hour sprints to all-day rides that flirt with fading light. It dares you to escape the familiar, take tight turns at full speed, guzzle adrenaline on descents, and chase epic views from the saddle of an elegant, carefully crafted road machine. A.C.E. Tubing - painstakingly built from our proprietary heat-treated, air-hardened, and custom-extruded A.C.E. steel tubing, there’s nothing else like it on Earth. Flat-Mount Brakes offer clean aesthetics, control on descents, and reliable braking in wet conditions. Tire Clearance - run 700c x 32mm tires with fenders or 700c x 35mm without. Custom Dropouts - All-City’s signature engraved logo shines with classic style. Signature Seat Collar - train your eyes on that timeless and tasteful brazed-on seat collar, elegantly designed around the All-City logo.
$4,500.00
The Warakin Ti is an efficient, responsive, sprightly titanium bike that can handle any road in any weather. Using the progressive geometry of its Warakin Stainless predecessor, the Warakin Ti pairs unrivaled ride quality with the superior quality of titanium. It's a lightweight, durable, lively machine that will carry the rider to where they choose to go, while enjoying every pedal stroke along the way. ************************************************************** Angry Catfish's website is tied into Otso's available inventory. If you are visiting our store to view the bike, please contact us before coming, to ensure we have what you're looking for. ************************************************************** SUPERIOR TITANIUM The 3Al/2.5V B338 grade 9 titanium that we use for the Warakin Ti is the same titanium that has been a bicycle industry favorite for decades, and with good reason. Equal parts science and magic, titanium is durable, lightweight, lively, corrosion resistant, and timeless. The tubing is seamless, butted, clean, and strong. It's because of the superior quality of titanium that we chose this material to lend to our heralded Warakin geometry as a bike that will endure the roughest roads in the harshest conditions and tell the stories for decades to come. EXTRA TIRE CLEARANCE If a bike is meant to ride any road in any condition, it needs to fit tires and wheels that will get you to and from your destination, while handling every bump along the way. The massive tire clearance of the Warakin Ti was built with this in mind. It'll fit 29" x 2.1" for that road that doesn't actually appear on the map, just as easily as 650b x 50mm for windy forest trails, or 700c x 35mm (or 700c x 50mm if you want a little extra) for your next gravel race. Because a frame that can last forever needs to have the ability to adapt to whatever the road (and the future) may bring. VERSATILITY Like all Otso bikes, the Warakin Ti sports our patented Tuning Chip rear dropout system, which allows the rider to lengthen or shorten the wheelbase by up to 20mm and raise or lower the bottom bracket by up to 4mm. For chunky gravel on remote roads, the longer wheelbase of the rear position is set for stability and comfort. For a quick spin around town or the CX course, the front position makes for snappy handling and agile control. The middle position? That's the best of both worlds. The Tuning Chip rear dropout system was designed because the bike should be just as versatile as its rider. TOP QUALITY Designed by the Otso engineering team, Warakin Ti frames are built by top fabricators in Taiwan and come with a five-year limited warranty. All bikes and frames are inspected and assembled at our headquarters in Minneapolis, MN USA. PROGRESSIVE GEOMETRY The progressive geometry of the Warakin Ti takes a page from the cross-country MTB playbook. Increased top tube length and a shorter stem maintain stack and reach while providing a lively ‘can-do’ attitude on rougher terrain. EXTRA MOUNTING OPTIONS Numerous braze-ons accommodate three bottles, fenders, racks, cable routing clamps, frame bags, and more. Mix in the Wolf Tooth B-RAD System to even further increase on-bike storage options. SUSPENSION-READY The geometry of the Warakin Ti includes an axle-to-crown measurement of 420mm, which allows for a shorter suspension fork.
$4,479.30 $6,399.00 30% Off
Optimized for the Entire Mountain We tailored every detail of the Switchblade to deliver a bike ready to conquer the entire mountain. Progressive geometry broadens the performance envelope while retaining the versatility that made the original so good. Always with an eye on confidence-inspiring design, we shortened, straightened, and steepened the Switchblade's seat tube to allow longer travel dropper posts. Uncommon Versatility The Switchblade was already a bike ahead of its time and the new Switchblade pushes the versatility envelope even further. It doesn't matter if you want to run 29er wheels, 27.5" X 2.8" plus tires, or even a 29"/27.5" combo – the Switchblade can be perfected for all. Beyond All Mountain The new Switchblade's extraordinary versatility and category-bending capability redefine performance across every type of trail. From bike park flow trails to raw backcountry routes, the Switchblade amplifies every rider's skills and excels on any trail. Product Details: - Ultra-Light Hollow Core Carbon Frame. - 142mm of supple-yet-efficient dw-link™ suspension travel featuring a vertically mounted trunnion metric air shock. - Equipped with a 44mm offset 160 mm-travel Fox 36 Grip2. - Flip Chip for on-trail geometry customization. - Featuring the easy-to-find UDH rear derailleur hanger for peace of mind when traveling. - Hassle-free full internal routing with Pivot cable port system. - Compatible with both 29, 27.5+", and 27.5" rear/29" front (mullet) wheel sizes without compromise thanks to the Flip chip's adjustable geometry feature. - Custom-tuned Fox Live Valve builds allow for layers of tuning for a plusher-than-plush feel unmatched by any other suspension setup. - Large Water Bottle Clearance on all sizes. - Pivot Tool Dock system is compatible with mounts under the top tube and integrated into the underside of the frame.
$4,352.00 $5,120.00 15% Off
The Otso Fenrir is a ride-anywhere bike for bikepacking races and afternoon adventures alike. It can be built with drop bars or with MTB bars and both selections are available as stock build options. A tire clearance of 29” x 2.6” or 27.5” x 2.8” keeps the Fenrir rolling on rough terrain, while extra frame and fork braze-ons are ready to carry gear for days or weeks on the trail. Like all Otso bikes, the Fenrir has adjustable geometry via the patented Tuning Chip rear dropout system that makes the bike as adaptable as its rider. ***************************************************************** Note: Otso is a close partner whose warehouse is located just a few miles from ACF. We show Otso's bike catalog as in-store because we can get bikes and frames within a few days. Please call to ensure we have the size you are looking for built and in-store before stopping by for a test ride. ***************************************************************** VERSATILITY While all Otso bikes are known for their versatility, the Fenrir might be the most versatile yet. It was designed to accommodate drop bars with a 50mm stem or MTB bars with an 80mm stem. It can be built with gears or single speed, with a suspension fork or rigid, with a mechanical or electronic drivetrain, or with a dropper or rigid seat post. The ability to fully customize the build of the bike makes the Fenrir as versatile as its rider. FENRIR WITH DROP BARS The Fenrir was designed with the option to be built with drop bars or MTB bars. When configured with drop bars, the Fenrir rides like an extra-capable gravel bike. The relatively longer top tube means a shorter stem is needed with drop bars to align with the rider's preferred reach. It can be built with standard road/CX/gravel bars for rides on local trails or with wider bars to fit a handlebar roll loaded with lots of gear. FENRIR WITH FLAT BARS When built with MTB bars, Fenrir rides like a 90s XC bike. It's fun and lively, yet efficient and Capable with a capital C. It can handle any sketchy descent or technical climb with ease. Because the top tube is relatively short for a mountain bike, a longer stem (80-90mm) is ideal for maintaining reach. Ride it on your local singletrack or load 'er up for that backcountry tour that you've been dreaming about--you know the one. However you choose to build it, Fenrir will ride any road/trail on the map and carry all the gear to get you there. DESIGNED FOR BIKEPACKING Every last feature of Fenrir Ti is optimized for bikepacking. The titanium frame is strong, smooth, and lighter than steel. It can be built with flat bars or drop bars depending on your affinity for large handlebar rolls. Single speed is an option for folks who like simplicity while touring. It has extra mounts on the frame and fork for hauling all the gear you'll need for days (or weeks) on the trail. The frame and fork can clear 29" x 2.6" or 27.5" x 2.8" tires for trails that are especially gnarly. No matter your destination and how long it takes to get there, Fenrir Ti is ready. SINGLE SPEED All metal Otso bikes have the option to be built single speed or with gears. Fenrir is included in that group because it has a small notch on the rear dropout near the Tuning Chip. If you build your Fenrir with gears, but want to convert to single speed later on, there is a single speed Tuning Chip ready to order alongside other accessories. There's no wrong way to build your Fenrir. SO MANY MOUNTS A bikepacking bike needs to be able to carry all the gear for days or weeks on the trail. Fenrir has mounts for bottles, fenders, and racks. The Enve fork also has three-pack mounts on either side for sharing the load. CAPABLE GEOMETRY Pick a trail on the map and ride it. Fenrir has the endurance of a gravel bike, with the stability of a mountain bike. Above all, it is Capable with a capital C so you can stay the course and reach your destination. DROPPER FRIENDLY A small port near the bottom of the seat tube allows for the cable routing of a dropper post. If you don't ride with a dropper, you probably won't even notice the port. AMPLE CLEARANCE Tires need to meet demands of the trail for traction, stability, and comfort. Fenrir can ride up to 29" x 2.6" or 27.5" x 2.8" tires.
$4,345.00
Voytek 2 takes what the original Voytek started and makes it better. This is a fat bike that rides like a mountain bike on snowy trails. We overhauled Voytek geometry to give you a fat bike that lets you go even faster with more confidence. Voytek 2 has adjustable geometry via the patented Tuning Chip dropout system like all Otso bikes, as well as the new GeoChip head tube system that alters geometry at the front end of the bike. It has clearance for 26” x 4.6” or 27.5” x 4.5” tires, suspension correction for a suspension fork, internal cable routing, lower standover, and several more updates. When the snow melts, swap in a 29” plus wheelset to keep the party going all year. Voytek changed the world of fat bikes when we announced it in 2016. Voytek 2 is here to do it again. Narrow Q factor Voytek 2 feels more like riding a mountain bike than a bike built for 26" x 4.6" tires because it has a narrow Q factor. The Q factor of a bike is the distance between the outer surfaces of your two crank-arms. The narrower the Q factor, the more natural it feels to pedal and handle the bike because it is closer to your normal biomechanics. It also allows for stronger power transfer to the pedals, more efficient pedaling, and increased overall performance. Adjustable Geometry When pairing the GeoChip head tube system with the Tuning Chip rear dropout system, Voytek 2 geometry has unprecedented adjustability. Pair a long wheelbase with a slack head tube angle for a stable ride in deep snow. Pair a short wheelbase with a steeper head tube angle for a responsive ride on packed, tacky snow. Or mix and match based on your riding style. Customize Reach and Head Tube Angle GeoChip is a new integrated system that allows you to adjust reach and head tube angle. Three sets of flip chips nest in the frame and hold the headset upper and lower cups. One set of GeoChip flip chips allows for +/- 10mm of reach adjustment, another allows for +/- 1º of head tube angle adjustment, and the third allows for +/- 2º of head tube angle adjustment. This means that you can easily adjust your reach or head tube angle at home based on the riding ahead. With two reach options for each bike due to GeoChip, Voytek 2 effectively has eight frame sizes. Tuning Chip Rear Dropout System All Otso bikes are equipped with adjustable geometry via our patented Tuning Chip rear dropout system. The Tuning Chip can adjust the wheelbase by up to 20mm, raise or lower the bottom bracket by up to 4mm, and adjust the head tube angle by +/- 0.5º. With the machined aluminum flip chip in the rear position, Voytek 2 has a longer wheelbase, lower bottom bracket, and slacker head tube angle for confidence and stability in deeper snow. Use the front position for more responsive handling on packed trails with tight turns. A middle position chip pairs the best of both worlds. Tire Clearance and Wheel Swapping Voytek 2 can fit 26” x 4.6” or 27.5" x 4.5" tires on the stock rims. A full breakdown of tire/rim pairings can be found below in the Tech Specs. To achieve this wide tire clearance with an extremely narrow bottom bracket, the rear hub has a 5mm outboard offset to prevent chain rub. Voytek 2 can also fit 29” x 3.0” tires. So when the trails are packed with snow, ride 26” x 4.0” tires, then when the snow melts and the trails turn to dirt, swap in your 29” wheelset for plus mountain bike riding. Voytek 2 was designed to accommodate multiple wheel sizes without compromising ride quality. Modern MTB Geometry Voytek 2 builds on the geometry that we pioneered with our original Voytek. We gave Voytek 2 a slacker head tube angle, steeper seat tube angle, shorter standover. This updated geometry allows you to go faster with more confidence. Suspension Correction Voytek 2 is suspension corrected. This means that you can build it with a 120mm travel suspension fork without drastically changing the geometry of the bike with a rigid fork. Dropper Compatibility Dropper post routing has a fully internal sleeve via a port behind the head tube. The Wolf Tooth Resolve Dropper Post is an option on the Voytek 2 Custom Bike Builder. Large Front Triangle A larger front triangle means that you can fit more cargo for your ride. Use this space for a custom frame bag, two bottles, or anything else that you need to carry for the ride ahead.
$3,195.00 - $4,280.00
We've partnered with our friends at The Radavist to bring this collaboration Voytek to life. It has all of the same features as the existing Voytek, but with this special colorway. It's ready for snowy adventures and desert touring alike. A portion of all proceeds will be donated to Protect Our Winters. When describing a fat bike, you wouldn’t typically describe it as agile. That’s where the Voytek is different. We paired a narrow pedal stance—aka Q factor—with aggressive XC race geometry to build a fat bike that can intuitively handle snowy trails like your mountain bike can handle summer singletrack. ***************************************************************** Angry Catfish's website is tied into Otso's available inventory. If you are visiting our store to view the bike, please contact us before coming, to ensure we have what you're looking for. ***************************************************************** THE Q-FACTOR IS THE KEY The Voytek has the narrowest Q-factor of any fat bike in the world at 183mm. With a narrow Q-factor, your weight is closer to the centerline of the bike. This is especially important when cornering because it allows for tight, responsive control—the wider Q-factor found on most fat bikes spreads out your pedals and creates a floppy, unstable feel. The frame was designed around an 83mm bottom bracket, where most fat bikes have a bottom bracket north of the 100-110mm range. With the Voytek, you don’t need to compromise agile handling to ride up to 4.6” tires. ONE BIKE, THREE WHEELBASE LENGTHS Our Tuning Chip rear dropout is at the heart of the versatile Voytek. With a quick change in positions, the wheelbase of the Voytek can be extended or shortened by up to 20mm, which also changes bottom bracket height by up to 4mm. In the forward position, you’ve got an aggressive, responsive Voytek for your next race. In the rear position, you’ve got that same intuitive handling but with added stability to make it easier to ride in deep snow or adverse terrain. In the middle, well, that’s the best of both worlds. PLUS OR FAT? FAT OR PLUS? We’re internally divided here as to whether the Voytek is a plus bike that can handle fat tires or if the Voytek is a fat bike that has the handling worthy of a plus bike. When the trails are packed with snow, we’re riding 4” tires. When spring comes and the trails turn to dirt, we swap out tires and ride plus until winter returns. The versatility of the Voytek blurs the lines of plus and fat, keeping the party going all year long. WHEELIES GALORE! The Voytek can run a wide range of wheel sizes: 27.5" or 29" plus MTB tires to 26" x 4.6" fat tires. MODERN GEOMETRY Voytek's longer top tube, short chainstays – the shortest in the world for a fat bike – and slightly slacker head tube angle mean more speed and more fun. SUSPENSION CORRECT Voytek's suspension-corrected geometry is compatible with an Otso™ carbon rigid fork or up to 120 mm travel suspension fork. COMPETITOR-TESTED, ISO APPROVED Voytek's patent-pending frame design exceeds all ISO frame safety standards and has been proven over thousands of miles of test riding, including the legendary Iditarod Invitational and Arrowhead 135 competitions. DROPPER COMPATIBLE The EPS molded carbon frame of the Voytek was designed to accept internally routed dropper seat posts.
$4,199.00
Inspired by the lines of vintage Italian scooters and classic German cars, the Benno eJoy combines the timeless language of vehicle design of the past with modern technology and and their Etility design. The result is an ebike that's both charming and capable. The powerful and efficient Bosch Performance Line Sport electric motor with 85Nm of torque provides the rider assistance to 20mph. A sturdy oversized rear rack and an optional frame-mounted front tray to give you serious load capacity. Its comfortable and upright (yet powerful) riding position makes riding easy and fun, while the extra-strong aluminum frame with its low step-through design gives you a smooth ride with extra control. The eJoy ebike is a true two-wheeled electrical vehicle that allows you to leave your car behind, whether you're running errands or on a scenic joyride. - Bosch Performance 250W, 65Nm, and Bosch Powerpack 400Wh Lithium-Ion Battery - Assisted Speed: USA, Canada 20mph. Range 30-90mi (50-145km) Dep. On Mode/Battery - Bosch Purion On-Board Computer (5 Riding Modes) - German Supernova Mini 2 Front Light and E3 Rear Light - Bosch 2A/4A Compact Charger (6.5h/4.5h Full Charge) - Shimano Deore 10-Speed and Hydraulic disc Brakes - Frame-Mounted Abus Lock with Same Keys as Battery Sizing - One Frame Size: Fits Riders From 5'0" to 6'0"
$3,499.00 - $4,199.00 $4,199.00 Up to 17% Off
Inspired by the lines of vintage Italian scooters and classic German cars, the Benno eJoy combines the timeless language of vehicle design of the past with modern technology and and their Etility design. The result is an ebike that's both charming and capable. The powerful and efficient Bosch Performance Line Sport electric motor with 85Nm of torque provides the rider assistance to 20mph. A sturdy oversized rear rack and an optional frame-mounted front tray to give you serious load capacity. Its comfortable and upright (yet powerful) riding position makes riding easy and fun, while the extra-strong aluminum frame with its low step-through design gives you a smooth ride with extra control. The eJoy ebike is a true two-wheeled electrical vehicle that allows you to leave your car behind, whether you're running errands or on a scenic joyride. - Bosch Performance 250W, 65Nm, and Bosch Powerpack 400Wh Lithium-Ion Battery - Assisted Speed: USA, Canada 20mph. Range 30-90mi (50-145km) Dep. On Mode/Battery - Bosch Purion On-Board Computer (5 Riding Modes) - German Supernova Mini 2 Front Light and E3 Rear Light - Bosch 2A/4A Compact Charger (6.5h/4.5h Full Charge) - Shimano Deore 10-Speed and Hydraulic disc Brakes - Frame-Mounted Abus Lock with Same Keys as Battery Sizing - One Frame Size: Fits Riders From 5'0" to 6'0"
$4,120.00
The Otso Fenrir is a ride-anywhere bike for bikepacking races and afternoon adventures alike. It can be built with drop bars or with MTB bars and both selections are available as stock build options. A tire clearance of 29” x 2.6” or 27.5” x 2.8” keeps the Fenrir rolling on rough terrain, while extra frame and fork braze-ons are ready to carry gear for days or weeks on the trail. Like all Otso bikes, the Fenrir has adjustable geometry via the patented Tuning Chip rear dropout system that makes the bike as adaptable as its rider. ************************************************************** Angry Catfish's website is tied into Otso's available inventory. If you are visiting our store to view the bike, please contact us before coming, to ensure we have what you're looking for. ************************************************************** OPTIMIZED FOR BIKEPACKING Every last feature of Fenrir is optimized for bikepacking. The stainless steel frame is strong, comfortable, and surprisingly light weight. It can be built with flat bars or drop bars depending on your affinity for large handlebar rolls. Single speed is an option for folks who like simplicity while touring. It has extra mounts on the frame and fork for hauling all the gear you'll need for days (or weeks) on the trail. The frame and fork can clear 29" x 2.6" or 27.5" x 2.8" tires for trails that are especially gnarly. No matter your destination and how long it takes to get there, Fenrir is ready. VERSATILITY While all Otso bikes are known for their versatility, the Fenrir might be the most versatile yet. It was designed to accommodate drop bars with a 50mm stem or MTB bars with an 80mm stem. It can be build with gears or single speed, with a suspension fork or rigid, with a mechanical or electronic drivetrain, or with a dropper or rigid seat post. The ability to fully customize the build of the bike makes the Fenrir as versatile as its rider. FENRIR WITH FLAT BARS When built with MTB bars, Fenrir rides like a 90s XC bike. It's fun and lively, yet efficient and Capable with a capital C. It can handle any sketchy descent or technical climb with ease. Because the top tube is relatively short for a mountain bike, a longer stem (80-90mm) is ideal for maintaining reach. Ride it on your local singletrack or load 'er up for that backcountry tour that you've been dreaming about –you know the one. However you choose to build it, Fenrir will ride any road/trail on the map and carry all the gear to get you there. FENRIR WITH DROP BARS Fenrir was designed with the option to be built with drop bars or MTB bars. When configured with drop bars, the Fenrir rides like an extra-capable gravel bike. The relatively longer top tube means a shorter stem is needed with drop bars to align with the rider's preferred reach. It can be built with standard road/CX/gravel bars for rides on local trails or with wider bars to fit a handlebar roll loaded with lots of gear. SO MANY MOUNTS A bikepacking bike needs to be able to carry all the gear for days or weeks on the trail. Fenrir has mounts for bottles, fenders, and racks. The Enve fork also has three-pack mounts on either side for sharing the load. CAPABLE GEOMETRY Pick a trail on the map and ride it. Fenrir has the endurance of a gravel bike, with the stability of a mountain bike. Above all, it is Capable with a capital C so you can stay the course and reach your destination. DROPPER FRIENDLY A small port near the bottom of the seat tube allows for the cable routing of a dropper post. If you don't ride with a dropper, you probably won't even notice the port. AMPLE CLEARANCE Tires need to meet demands of the trail for traction, stability, and comfort. Fenrir can ride up to 29" x 2.6" or 27.5" x 2.8" tires. SINGLE SPEED All metal Otso bikes have the option to be built single speed or with gears. Fenrir is included in that group because it has a small notch on the rear dropout near the Tuning Chip. If you build your Fenrir with gears, but want to convert to single speed later on, we have the single speed Tuning Chip available on our website alongside other accessories. There's no wrong way to build your Fenrir.
$4,120.00
The Otso Fenrir is a ride-anywhere bike for bikepacking races and afternoon adventures alike. It can be built with drop bars or with MTB bars and both selections are available as stock build options. A tire clearance of 29” x 2.6” or 27.5” x 2.8” keeps the Fenrir rolling on rough terrain, while extra frame and fork braze-ons are ready to carry gear for days or weeks on the trail. Like all Otso bikes, the Fenrir has adjustable geometry via the patented Tuning Chip rear dropout system that makes the bike as adaptable as its rider. ************************************************************** Angry Catfish's website is tied into Otso's available inventory. If you are visiting our store to view the bike, please contact us before coming, to ensure we have what you're looking for. ************************************************************** VERSATILITY While all Otso bikes are known for their versatility, the Fenrir might be the most versatile yet. It was designed to accommodate drop bars with a 50mm stem or MTB bars with an 80mm stem. It can be built with gears or single speed, with a suspension fork or rigid, with a mechanical or electronic drivetrain, or with a dropper or rigid seat post. The ability to fully customize the build of the bike makes the Fenrir as versatile as its rider. FENRIR WITH DROP BARS The Fenrir was designed with the option to be built with drop bars or MTB bars. When configured with drop bars, the Fenrir rides like an extra-capable gravel bike. The relatively longer top tube means a shorter stem is needed with drop bars to align with the rider's preferred reach. It can be built with standard road/CX/gravel bars for rides on local trails or with wider bars to fit a handlebar roll loaded with lots of gear. FENRIR WITH FLAT BARS When built with MTB bars, Fenrir rides like a 90s XC bike. It's fun and lively, yet efficient and Capable with a capital C. It can handle any sketchy descent or technical climb with ease. Because the top tube is relatively short for a mountain bike, a longer stem (80-90mm) is ideal for maintaining reach. Ride it on your local singletrack or load 'er up for that backcountry tour that you've been dreaming about--you know the one. However you choose to build it, Fenrir will ride any road/trail on the map and carry all the gear to get you there. OPTIMIZED FOR BIKEPACKING Every last feature of Fenrir is optimized for bikepacking. The stainless steel frame is strong, comfortable, and surprisingly light weight. It can be built with flat bars or drop bars depending on your affinity for large handlebar rolls. Single speed is an option for folks who like simplicity while touring. It has extra mounts on the frame and fork for hauling all the gear you'll need for days (or weeks) on the trail. The frame and fork can clear 29" x 2.6" or 27.5" x 2.8" tires for trails that are especially gnarly. No matter your destination and how long it takes to get there, Fenrir is ready. SINGLE SPEED All metal Otso bikes have the option to be built single speed or with gears. Fenrir is included in that group because it has a small notch on the rear dropout near the Tuning Chip. If you build your Fenrir with gears, but want to convert to single speed later on, there is a single speed Tuning Chip available ready to order alongside other accessories. There's no wrong way to build your Fenrir. SO MANY MOUNTS A bikepacking bike needs to be able to carry all the gear for days or weeks on the trail. Fenrir has mounts for bottles, fenders, and racks. The Enve fork also has three-pack mounts on either side for sharing the load. CAPABLE GEOMETRY Pick a trail on the map and ride it. Fenrir has the endurance of a gravel bike, with the stability of a mountain bike. Above all, it is Capable with a capital C so you can stay the course and reach your destination. DROPPER FRIENDLY A small port near the bottom of the seat tube allows for the cable routing of a dropper post. If you don't ride with a dropper, you probably won't even notice the port. AMPLE CLEARANCE Tires need to meet demands of the trail for traction, stability, and comfort. Fenrir can ride up to 29" x 2.6" or 27.5"x 2.8" tires. 
$4,120.00
The Otso Fenrir is a ride-anywhere bike for bikepacking races and afternoon adventures alike. It can be built with drop bars or with MTB bars and both selections are available as stock build options. A tire clearance of 29” x 2.6” or 27.5” x 2.8” keeps the Fenrir rolling on rough terrain, while extra frame and fork braze-ons are ready to carry gear for days or weeks on the trail. Like all Otso bikes, the Fenrir has adjustable geometry via the patented Tuning Chip rear dropout system that makes the bike as adaptable as its rider. ************************************************************** Angry Catfish's website is tied into Otso's available inventory. If you are visiting our store to view the bike, please contact us before coming, to ensure we have what you're looking for. ************************************************************** OPTIMIZED FOR BIKEPACKING Every last feature of Fenrir is optimized for bikepacking. The stainless steel frame is strong, comfortable, and surprisingly light weight. It can be built with flat bars or drop bars depending on your affinity for large handlebar rolls. Single speed is an option for folks who like simplicity while touring. It has extra mounts on the frame and fork for hauling all the gear you'll need for days (or weeks) on the trail. The frame and fork can clear 29" x 2.6" or 27.5" x 2.8" tires for trails that are especially gnarly. No matter your destination and how long it takes to get there, Fenrir is ready. VERSATILITY While all Otso bikes are known for their versatility, the Fenrir might be the most versatile yet. It was designed to accommodate drop bars with a 50mm stem or MTB bars with an 80mm stem. It can be build with gears or single speed, with a suspension fork or rigid, with a mechanical or electronic drivetrain, or with a dropper or rigid seat post. The ability to fully customize the build of the bike makes the Fenrir as versatile as its rider. FENRIR WITH FLAT BARS When built with MTB bars, Fenrir rides like a 90s XC bike. It's fun and lively, yet efficient and Capable with a capital C. It can handle any sketchy descent or technical climb with ease. Because the top tube is relatively short for a mountain bike, a longer stem (80-90mm) is ideal for maintaining reach. Ride it on your local singletrack or load 'er up for that backcountry tour that you've been dreaming about –you know the one. However you choose to build it, Fenrir will ride any road/trail on the map and carry all the gear to get you there. FENRIR WITH DROP BARS Fenrir was designed with the option to be built with drop bars or MTB bars. When configured with drop bars, the Fenrir rides like an extra-capable gravel bike. The relatively longer top tube means a shorter stem is needed with drop bars to align with the rider's preferred reach. It can be built with standard road/CX/gravel bars for rides on local trails or with wider bars to fit a handlebar roll loaded with lots of gear. SO MANY MOUNTS A bikepacking bike needs to be able to carry all the gear for days or weeks on the trail. Fenrir has mounts for bottles, fenders, and racks. The Enve fork also has three-pack mounts on either side for sharing the load. CAPABLE GEOMETRY Pick a trail on the map and ride it. Fenrir has the endurance of a gravel bike, with the stability of a mountain bike. Above all, it is Capable with a capital C so you can stay the course and reach your destination. DROPPER FRIENDLY A small port near the bottom of the seat tube allows for the cable routing of a dropper post. If you don't ride with a dropper, you probably won't even notice the port. AMPLE CLEARANCE Tires need to meet demands of the trail for traction, stability, and comfort. Fenrir can ride up to 29" x 2.6" or 27.5" x 2.8" tires. SINGLE SPEED All metal Otso bikes have the option to be built single speed or with gears. Fenrir is included in that group because it has a small notch on the rear dropout near the Tuning Chip. If you build your Fenrir with gears, but want to convert to single speed later on, we have the single speed Tuning Chip available on our website alongside other accessories. There's no wrong way to build your Fenrir.
$4,120.00
The Otso Fenrir is a ride-anywhere bike for bikepacking races and afternoon adventures alike. It can be built with drop bars or with MTB bars and both selections are available as stock build options. A tire clearance of 29” x 2.6” or 27.5” x 2.8” keeps the Fenrir rolling on rough terrain, while extra frame and fork braze-ons are ready to carry gear for days or weeks on the trail. Like all Otso bikes, the Fenrir has adjustable geometry via the patented Tuning Chip rear dropout system that makes the bike as adaptable as its rider. ***************************************************************** Angry Catfish's website is tied into Otso's available inventory. If you are visiting our store to view the bike, please contact us before coming, to ensure we have what you're looking for. ***************************************************************** VERSATILITY While all Otso bikes are known for their versatility, the Fenrir might be the most versatile yet. It was designed to accommodate drop bars with a 50mm stem or MTB bars with an 80mm stem. It can be built with gears or single speed, with a suspension fork or rigid, with a mechanical or electronic drivetrain, or with a dropper or rigid seat post. The ability to fully customize the build of the bike makes the Fenrir as versatile as its rider. FENRIR WITH DROP BARS The Fenrir was designed with the option to be built with drop bars or MTB bars. When configured with drop bars, the Fenrir rides like an extra-capable gravel bike. The relatively longer top tube means a shorter stem is needed with drop bars to align with the rider's preferred reach. It can be built with standard road/CX/gravel bars for rides on local trails or with wider bars to fit a handlebar roll loaded with lots of gear. FENRIR WITH FLAT BARS When built with MTB bars, Fenrir rides like a 90s XC bike. It's fun and lively, yet efficient and Capable with a capital C. It can handle any sketchy descent or technical climb with ease. Because the top tube is relatively short for a mountain bike, a longer stem (80-90mm) is ideal for maintaining reach. Ride it on your local singletrack or load 'er up for that backcountry tour that you've been dreaming about--you know the one. However you choose to build it, Fenrir will ride any road/trail on the map and carry all the gear to get you there. OPTIMIZED FOR BIKEPACKING Every last feature of Fenrir is optimized for bikepacking. The stainless steel frame is strong, comfortable, and surprisingly light weight. It can be built with flat bars or drop bars depending on your affinity for large handlebar rolls. Single speed is an option for folks who like simplicity while touring. It has extra mounts on the frame and fork for hauling all the gear you'll need for days (or weeks) on the trail. The frame and fork can clear 29" x 2.6" or 27.5" x 2.8" tires for trails that are especially gnarly. No matter your destination and how long it takes to get there, Fenrir is ready. SINGLE SPEED All metal Otso bikes have the option to be built single speed or with gears. Fenrir is included in that group because it has a small notch on the rear dropout near the Tuning Chip. If you build your Fenrir with gears, but want to convert to single speed later on, there is a single speed Tuning Chip available ready to order alongside other accessories. There's no wrong way to build your Fenrir. SO MANY MOUNTS A bikepacking bike needs to be able to carry all the gear for days or weeks on the trail. Fenrir has mounts for bottles, fenders, and racks. The Enve fork also has three-pack mounts on either side for sharing the load. CAPABLE GEOMETRY Pick a trail on the map and ride it. Fenrir has the endurance of a gravel bike, with the stability of a mountain bike. Above all, it is Capable with a capital C so you can stay the course and reach your destination. DROPPER FRIENDLY A small port near the bottom of the seat tube allows for the cable routing of a dropper post. If you don't ride with a dropper, you probably won't even notice the port. AMPLE CLEARANCE Tires need to meet demands of the trail for traction, stability, and comfort. Fenrir can ride up to 29" x 2.6""or 27.5" x 2.8" tires.
$3,999.00
Nothing's too much with this comfortable e-bike. The convenience of the low, wide step-through and the upright sitting position add to the pleasure of cycling. The quiet belt drive is virtually maintenance-free, and with the powerful disc brakes and good lighting, you have everything under control.
$1,499.00 - $3,999.00 $1,499.00 - $3,999.00 Up to 25% Off
The DV9 is back! A do-it-all carbon fiber hardtail designed to take you from the trailhead to the starting line, with a session at the pump track in between. Lighter weight, with up to date geometry, and engineered to the same exacting standards as the rest of our line, it packs a ton of performance in a more accessible price. Geometry Inspired by the World Cup Race Win­ning Exie USA, the DV9 fea­tures a row­dy-but-not-too-row­dy 66.5° head angle and ultra-play­ful 425mm chain­stays. A low stan­dover improves fit for the inseam chal­lenged rid­er, while size spe­cif­ic seat tube angles gives rid­ers of all heights an effi­cient yet enjoy­able rid­ing position. Tire Clearance Whether you pre­fer the cushy and con­fi­dent ride that 2.6” tires deliv­er or the blaz­ing speed of weight-con­scious 2.25” rub­ber, we’ve got you covered. Internal Cable Routing Inter­nal cable rout­ing used to be a pain in the ass but our inter­nal tubes make rout­ing easy. Just pop the hous­ing through and it comes out the oth­er end, no need for swear words or a pickset. Frame Protection Our thick rub­ber down­tube and chain­stay pro­tec­tion help damp­en noise and pro­tect the frame. We’ve also includ­ed a sim­ple-yet-ele­gant adjustable top guide that allows you to drop the ham­mer, not your chain. 2X Bottle Clearance The DV9 has clear­ance for two water bot­tles inside the front tri­an­gle of every size frame. Even the small. Seven Year Warranty If it’s our fault, we’ll fix it. Sim­ple as that.
$3,699.00 - $3,999.00 $3,999.00 Up to 8% Off
The Ripley AF is our beloved, category-defying, short-travel, singletrack-scorching Ripley - rendered in aluminum, with more aggressive geometry. All the sizzle and pop of the carbon Ripley, now available as a complete bike at a wallet friendly price.
$3,999.00
Beargrease pairs a race-ready carbon frame with the capability of fat tires for the ultimate groomed-trail machine. Its trail geometry, dropper post, and 27.5" wheels grant you confidence in loose corners and descents and make for an all-season ripper. Frame and fork mounts for extra bottles and cargo make it easier to gear up for your long days out or even overnighters, and the high-performance XT/SLX drivetrain is the icing on the cake. For light-and-quick confidence on any terrain, Beargrease is one of the best carbon fat-tire bikes out there.
$3,999.00 $4,699.00 15% Off
Cutthroat C GRX 810 2x is an immensely capable carbon bikepacking bike, designed and built to be a tour de force on the Tour Divide. Cutthroat's lightweight carbon frame with Class 5 VRS offers a finely tuned blend of stiffness for pedaling efficiency and compliance for all-day comfort. Cutthroat's drop-bar mountain bike geometry is stable when picking your way down steep, loose descents but aggressive enough for enduring a full day of headwinds. Ample cargo mounts add versatility to the way you pack. Shimano's refined GRX 810 2x drivetrain delivers effortless shifting and braking and a wide gear range so you can focus on the view.
$3,995.00
Voytek 2 takes what the original Voytek started and makes it better. This is a fat bike that rides like a mountain bike on snowy trails. We overhauled Voytek geometry to give you a fat bike that lets you go even faster with more confidence. Voytek 2 has adjustable geometry via the patented Tuning Chip dropout system like all Otso bikes, as well as the new GeoChip head tube system that alters geometry at the front end of the bike. It has clearance for 26” x 4.6” or 27.5” x 4.5” tires, suspension correction for a suspension fork, internal cable routing, lower standover, and several more updates. When the snow melts, swap in a 29” plus wheelset to keep the party going all year. Voytek changed the world of fat bikes when we announced it in 2016. Voytek 2 is here to do it again. ************************************************************** Angry Catfish's website is tied into Otso's available inventory. If you are visiting our store to view the bike, please contact us before coming, to ensure we have what you're looking for. ************************************************************** Narrow Q factor Voytek 2 feels more like riding a mountain bike than a bike built for 26" x 4.6" tires because it has a narrow Q factor. The Q factor of a bike is the distance between the outer surfaces of your two crank-arms. The narrower the Q factor, the more natural it feels to pedal and handle the bike because it is closer to your normal biomechanics. It also allows for stronger power transfer to the pedals, more efficient pedaling, and increased overall performance. Adjustable Geometry When pairing the GeoChip head tube system with the Tuning Chip rear dropout system, Voytek 2 geometry has unprecedented adjustability. Pair a long wheelbase with a slack head tube angle for a stable ride in deep snow. Pair a short wheelbase with a steeper head tube angle for a responsive ride on packed, tacky snow. Or mix and match based on your riding style. Customize Reach and Head Tube Angle GeoChip is a new integrated system that allows you to adjust reach and head tube angle. Three sets of flip chips nest in the frame and hold the headset upper and lower cups. One set of GeoChip flip chips allows for +/- 10mm of reach adjustment, another allows for +/- 1º of head tube angle adjustment, and the third allows for +/- 2º of head tube angle adjustment. This means that you can easily adjust your reach or head tube angle at home based on the riding ahead. With two reach options for each bike due to GeoChip, Voytek 2 effectively has eight frame sizes. Tuning Chip Rear Dropout System All Otso bikes are equipped with adjustable geometry via our patented Tuning Chip rear dropout system. The Tuning Chip can adjust the wheelbase by up to 20mm, raise or lower the bottom bracket by up to 4mm, and adjust the head tube angle by +/- 0.5º. With the machined aluminum flip chip in the rear position, Voytek 2 has a longer wheelbase, lower bottom bracket, and slacker head tube angle for confidence and stability in deeper snow. Use the front position for more responsive handling on packed trails with tight turns. A middle position chip pairs the best of both worlds. Tire Clearance and Wheel Swapping Voytek 2 can fit 26” x 4.6” or 27.5" x 4.5" tires on the stock rims. A full breakdown of tire/rim pairings can be found below in the Tech Specs. To achieve this wide tire clearance with an extremely narrow bottom bracket, the rear hub has a 5mm outboard offset to prevent chain rub. Voytek 2 can also fit 29” x 3.0” tires. So when the trails are packed with snow, ride 26” x 4.0” tires, then when the snow melts and the trails turn to dirt, swap in your 29” wheelset for plus mountain bike riding. Voytek 2 was designed to accommodate multiple wheel sizes without compromising ride quality. Modern MTB Geometry Voytek 2 builds on the geometry that we pioneered with our original Voytek. We gave Voytek 2 a slacker head tube angle, steeper seat tube angle, shorter standover. This updated geometry allows you to go faster with more confidence. Suspension Correction Voytek 2 is suspension corrected. This means that you can build it with a 120mm travel suspension fork without drastically changing the geometry of the bike with a rigid fork. Dropper Compatibility Dropper post routing has a fully internal sleeve via a port behind the head tube. The Wolf Tooth Resolve Dropper Post is an option on the Voytek 2 Custom Bike Builder. Large Front Triangle A larger front triangle means that you can fit more cargo for your ride. Use this space for a custom frame bag, two bottles, or anything else that you need to carry for the ride ahead.
$3,950.00
The Waheela C is a carbon-framed drop bar bike with an adjustable geometry, unrivaled ride quality, and enormous tire clearance for 700c x 54mm, 650b x 54mm, or 29" x 2.1" tires. It has extra frame and fork mounting points for bottles and racks, easily accessible internal cable routing options, compatibility for 1x or 2x electronic or mechanical drivetrains, and the ability to run a dropper post. No matter the road ahead (or under tire), the Waheela C is ready. ************************************************************** Angry Catfish's website is tied into Otso's available inventory. If you are visiting our store to view the bike, please contact us before coming, to ensure we have what you're looking for. ************************************************************** GIANT TIRE CLEARANCE Gravel comes in all shapes and sizes, from the packed limestone of Southeast Minnesota to the chunky roads of the Flint Hills of Kansas. The Waheela C is equipped with tire clearance to handle the terrain of your next race. Where most gravel bikes can fit 650b x 50mm but only 40mm with bigger wheels, the Waheela C keeps on rolling, with space for 700c x 54mm tires. It'll run 700c x 35mm when the roads are tacky and tidy, 700c x 42mm when there's a bit more uncertainty, 700c x 54mm when the gravel road turns to ATV trails, and anything in between. The Waheela C can also fit 29" x 2.1", 27.5" x 2.1", or 650b x 54mm if 700c isn't really your thing. In short, the Waheela C is ready for the road ahead. ADJUSTABLE GEOMETRY Like all Otso bikes, the Waheela C sports our patented Tuning Chip rear dropout system, which allows you to change the length of your wheelbase and height of your bottom bracket. Put the Tuning Chip in the back position to get the stability and comfort of a longer wheelbase for a full day of riding gravel. Switch to the front position to get the agile handling and responsiveness required by your next CX race. And the middle position? That's the best of both worlds. The adjustable geometry of the Waheela C allows you to ride any road or any trail without needing to switch bikes. UNRIVALED RIDE QUALITY Our proprietary Waheela geometry was developed by our engineers for stability, confidence, and comfort on rough terrain. Where many gravel bikes put extra weight on the front wheel, the Waheela C centers the rider over both wheels. This makes for a more stable ride while allowing the compliant rear triangle to come into play and absorb the bumps of a gravel road. Meanwhile, the lightweight EPS molded carbon frame adds responsiveness and readiness for a sprint up that next hill. After a long day on the saddle, you'll find yourself adding a healthy amount of miles to tomorrow's ride. EXTRA MOUNTING POINTS Waheela C features fork bottle bosses, extra down tube mounting points (6 total), as well as top tube gas tank mounting points. Numerous braze-ons allow Waheela C to accommodate water bottles, fenders, racks, frame bags, and more. DETAILS THAT MATTER Internal brake and shifter routing with sleeves, carbon access door under bottom bracket for easier routing, front and rear thru-axle, and threaded bottom bracket for reliable, easy service. This also allows you to run that dropper post you've been dreaming about. COMPATIBLE WITH 1X OR 2X Waheela C is 1x and 2x compatible with mechanical and electronic drivetrains. It's also fully compatible with both Shimano Di2 and SRAM eTap AXS, in case you don't want to take advantage of internal routing options. QUALITY ASSURED Designed by the Otso engineering team, Waheela C frames are manufactured in one of the premiere carbon fiber factories in Taiwan and come with a 5 year limited warranty. All bikes are inspected and assembled at our headquarters in Minneapolis, MN USA.
$3,950.00
The Waheela C is a carbon-framed drop bar bike with an adjustable geometry, unrivaled ride quality, and enormous tire clearance for 700c x 54mm, 650b x 54mm, or 29" x 2.1" tires. It has extra frame and fork mounting points for bottles and racks, easily accessible internal cable routing options, compatibility for 1x or 2x electronic or mechanical drivetrains, and the ability to run a dropper post. No matter the road ahead (or under tire), the Waheela C is ready. ************************************************************** Angry Catfish's website is tied into Otso's available inventory. If you are visiting our store to view the bike, please contact us before coming, to ensure we have what you're looking for. ************************************************************** GIANT TIRE CLEARANCE Gravel comes in all shapes and sizes, from the packed limestone of Southeast Minnesota to the chunky roads of the Flint Hills of Kansas. The Waheela C is equipped with tire clearance to handle the terrain of your next race. Where most gravel bikes can fit 650b x 50mm but only 40mm with bigger wheels, the Waheela C keeps on rolling, with space for 700c x 54mm tires. It'll run 700c x 35mm when the roads are tacky and tidy, 700c x 42mm when there's a bit more uncertainty, 700c x 54mm when the gravel road turns to ATV trails, and anything in between. The Waheela C can also fit 29" x 2.1", 27.5" x 2.1", or 650b x 54mm if 700c isn't really your thing. In short, the Waheela C is ready for the road ahead. ADJUSTABLE GEOMETRY Like all Otso bikes, the Waheela C sports our patented Tuning Chip rear dropout system, which allows you to change the length of your wheelbase and height of your bottom bracket. Put the Tuning Chip in the back position to get the stability and comfort of a longer wheelbase for a full day of riding gravel. Switch to the front position to get the agile handling and responsiveness required by your next CX race. And the middle position? That's the best of both worlds. The adjustable geometry of the Waheela C allows you to ride any road or any trail without needing to switch bikes. UNRIVALED RIDE QUALITY Our proprietary Waheela geometry was developed by our engineers for stability, confidence, and comfort on rough terrain. Where many gravel bikes put extra weight on the front wheel, the Waheela C centers the rider over both wheels. This makes for a more stable ride while allowing the compliant rear triangle to come into play and absorb the bumps of a gravel road. Meanwhile, the lightweight EPS molded carbon frame adds responsiveness and readiness for a sprint up that next hill. After a long day on the saddle, you'll find yourself adding a healthy amount of miles to tomorrow's ride. EXTRA MOUNTING POINTS Waheela C features fork bottle bosses, extra down tube mounting points (6 total), as well as top tube gas tank mounting points. Numerous braze-ons allow Waheela C to accommodate water bottles, fenders, racks, frame bags, and more. DETAILS THAT MATTER Internal brake and shifter routing with sleeves, carbon access door under bottom bracket for easier routing, front and rear thru-axle, and threaded bottom bracket for reliable, easy service. This also allows you to run that dropper post you've been dreaming about. COMPATIBLE WITH 1X OR 2X Waheela C is 1x and 2x compatible with mechanical and electronic drivetrains. It's also fully compatible with both Shimano Di2 and SRAM eTap AXS, in case you don't want to take advantage of internal routing options. QUALITY ASSURED Designed by the Otso engineering team, Waheela C frames are manufactured in one of the premiere carbon fiber factories in Taiwan and come with a 5 year limited warranty. All bikes are inspected and assembled at our headquarters in Minneapolis, MN USA.
$2,962.50 - $3,950.00 $3,950.00 Up to 25% Off
The Waheela C is a carbon-framed drop bar bike with an adjustable geometry, unrivaled ride quality, and enormous tire clearance for 700c x 54mm, 650b x 54mm, or 29" x 2.1" tires. It has extra frame and fork mounting points for bottles and racks, easily accessible internal cable routing options, compatibility for 1x or 2x electronic or mechanical drivetrains, and the ability to run a dropper post. No matter the road ahead (or under tire), the Waheela C is ready. GIANT TIRE CLEARANCE Gravel comes in all shapes and sizes, from the packed limestone of Southeast Minnesota to the chunky roads of the Flint Hills of Kansas. The Waheela C is equipped with tire clearance to handle the terrrain of your next race. Where most gravel bikes can fit 650b x 50mm but only 40mm with bigger wheels, the Waheela C keeps on rolling, with space for 700c x 54mm tires. It'll run 700c x 35mm when the roads are tacky and tidy, 700c x 42mm when there's a bit more uncertainty, 700c x 54mm when the gravel road turns to ATV trails, and anything in between. The Waheela C can also fit 29" x 2.1", 27.5" x 2.1", or 650b x 54mm if 700c isn't really your thing. In short, the Waheela C is ready for the road ahead. ADJUSTABLE GEOMETRY Like all Otso bikes, the Waheela C sports our patented Tuning Chip rear dropout system, which allows you to change the length of your wheelbase and height of your bottom bracket. Put the Tuning Chip in the back position to get the stability and comfort of a longer wheelbase for a full day of riding gravel. Switch to the front position to get the agile handling and responsiveness required by your next CX race. And the middle position? That's the best of both worlds. The adjustable geometry of the Waheela C allows you to ride any road or any trail without needing to switch bikes. UNRIVALED RIDE QUALITY Our proprietary Waheela geometry was developed by our engineers for stability, confidence, and comfort on rough terrain. Where many gravel bikes put extra weight on the front wheel, the Waheela C centers the rider over both wheels. This makes for a more stable ride while allowing the compliant rear triangle to come into play and absorb the bumps of a gravel road. Meanwhile, the lightweight EPS molded carbon frame adds responsiveness and readiness for a sprint up that next hill. After a long day on the saddle, you'll find yourself adding a healthy amount of miles to tomorrow's ride. EXTRA MOUNTING POINTS Waheela C features fork bottle bosses, extra down tube mounting points (6 total), as well as top tube gas tank mounting points. Numerous braze-ons allow Waheela C to accommodate water bottles, fenders, racks, frame bags, and more. DETAILS THAT MATTER Internal brake and shifter routing with sleeves, carbon access door under bottom bracket for easier routing, front and rear thru-axle, and threaded bottom bracket for reliable, easy service. This also allows you to run that dropper post you've been dreaming about. COMPATIBLE WITH 1X OR 2X Waheela C is 1x and 2x compatible with mechanical and electronic drivetrains. It's also fully compatible with both Shimano Di2 and SRAM eTap AXS, in case you don't want to take advantage of internal routing options. QUALITY ASSURED Designed by the Otso engineering team, Waheela C frames are manufactured in one of the premiere carbon fiber factories in Taiwan and come with a 5 year limited warranty. All bikes are inspected and assembled at our headquarters in Minneapolis, MN USA.
$1,500.00 - $3,950.00
The Rambler continues a fine tradition in cycling... the drop bar all-arounder! It's capable of gravel centuries, quick road loops, light touring, b-roads, and of course daily life. The Rambler is a fully modern adaptation of the genre with disc brakes, thru axles and generous tire clearance. The world is vast and so are the possibilities, the Rambler invites you to fully explore them all. It has all the mounts a rider could want, and geometry that is quick and fun while still being comfortable for long days in the saddle. As with all Wilde's, we build our bikes with higher stack heights and believe that when it comes to long distance pursuits, such as gravel, that comfortable is fast. Being a production bike, we are able to offer the Rambler SL at a more affordable price through our partnership with Taiwan's legendary Maxway factory. It comes in four sizes and this SL (Super Light) version is paired with our Wayfinder carbon fork. You’ll find a full suite of features that include: FRAME - Three pack mounts on top and bottom of down tube, bottle bosses on seat tube - Top tube feedbag mount - Fender mounts - Rack Mounts - Compatible with 2x and 1x drivetrains - Frame Weight 5lbs (medium) WAYFINDER FORK - Three pack mounts - Internal brake routing - Internal dynamo routing - Fender mounts - Fully threaded center mount - Tire clearance 700c X 2.1" or 650b X 2.3" TUBING - Wilde TLC - Tough, Light, Compliant - Our own proprietary double-butted, chromoly tube set. TLC stands for tough, light, and compliant which are the characteristics we select for. On each model and size, we select the optimum blend of tubing diameters, wall thickness, and butting profiles to yield a frame that is built to last, as light as practical, and exceedingly comfortable for the rider. FRAME SPEC - Clearance for up to 700c X 50mm or 650b X 2.2" tires - Traditional straight 1 1/8" headtube - 68mm bottom bracket shell - Flat mount brake - 142mm rear spacing - Seatpost: 27.2mm - Seat Collar: 30.0 - Cable Guides: Modular guides under the downtube, and full loop braze-ons on the stays (No Zip Ties) - 12mm Thru Axle - 1.5 x 172mm FORK SPEC - Flat Mount - 100mm spacing - 12mm Thru Axle - 1.5 x 130mm COMPLETE BIKE BUILD SPEC We are offering three stock build packages, SRAM Rival AXS, Shimano GRX, and SRAM Apex. SRAM Rival AXS 1x12 Specifications*: - SRAM Rival AXS shifters with hydraulic brakes - SRAM Rival AXS XPLR rear derailleur - SRAM Rival 1x Dub Wide 170mm crankset - SRAM XG-1251 cassette, 12 speed, 10-44 - Wolf Tooth Performance headset - Thomson 90mm stem - Thomson Elite setback seatpost - Salsa Cowbell handlebar - Stan's Crest S2 wheelset - Teravail Rutland 700cx42 tires - WTB Volt saddle - AXS charger - SRAM Centerline 160 mm rotors Shimano GRX810/600 2x12 Specifications*: - Shimano GRX610 shifters with hydraulic brakes - Shimano GRX820 front and rear derailleurs - Shimano GRX610 crankset, 46-30, 170mm - Shimano cassette, CS-HG710, 11-34 - Wolf Tooth Performance Headset - Thomson X4 90mm stem - Thomson Elite setback seatpost - Pro Discover 12D handlebar - Stan's Crest S2 Wheelset - WTB Riddler 700 x 45 tires, 60 TPI - WTB Volt saddle SRAM Apex 1x12 Specifications*: - SRAM Apex Hydro levers and brakes with 160mm rotors - SRAM Apex XPLR mechanical rear derailleur - SRAM Apex DUB Wide Crank 170mm 40t - SRAM Apex XPLR 11-44 cassette - SRAM Apex 12 spd. chain - Easton EA50 stem (90mm) and post - Easton EA50AX handlebar (44cm) - FSA Orbit X headset - FSA AGX i21 wheelset - WTB Riddler 700 x 45 tires, 60 TPI, tan - WTB Volt saddle *Subject to change without notice. We can also build yours up any way you want, we'd love to create your dream machine according to your taste and budget. We work with all the major component suppliers, as well as with many small niche makers. Contact us to get started. FINISH - Phosphate dipped and E.D. Coated for corrosion resistance and durability. Wet paint finish. Color - Copper Metallic
$3,750.00
Inspired by the lines of vintage Italian scooters and classic German cars, the eJoy combines the timeless language of vehicle design of the past with modern technology and Benno's Etility design. The result is an ebike that's both charming and capable. The powerful and efficient Bosch Performance 250W, motor with 65Nm of torque assists you up to 28Mph. It's sturdy oversized rear rack and an optional frame-mounted front tray to give you serious load capacity. Its comfortable and upright, yet powerful riding position makes riding easy and fun, while the extra-strong aluminum frame with its low step through design gives you a smooth ride with extra control. The eJoy is a true two wheeled electrical vehicle that allows you to leave your car behind, whether you're running errands or on a scenic joyride. - Bosch Performance Sport 250W, 65Nm, GEN 3 28Mph - Bosch Powerpack 400Wh Lithium-Ion Battery - Bosch Purion On-Board Computer (5 Riding Modes) - Shimano Deore 10-Speed and Hydraulic Disk Brakes - Frame-Mounted Abus Lock with Same Keys as Battery - Large Aluminum Rear Rack (Max. Load 85lbs/40kg) - Secure Yepp and Hamax Baby Seat Installation - Fits Most Aftermarket Pannier Bags and Accessories
$3,749.25 $4,999.00 25% Off
Introducing the Exie for all. Sharing the same geometry and performance as the World Cup winning Exie USA, our newest offering is handbuilt in Vietnam. It's everything we love about our US made offering (albeit ~250g heavier) in a wallet-friendly build. SIZE SPECIFIC SEAT ANGLES Whether you're rac­ing short track or on a mul­ti day epic, the Exie's seat tube angles allow you to har­ness your strongest mus­cles, while reduc­ing any potential knee or wrist strain. We've also steep­ened the seat tube angles as the frames get larg­er, to allow rid­ers with dif­fer­ent inseams to achieve the same rid­ing positions. DW-LINK SUSPENSION Don't squan­der a sin­gle watt. Our dw-link sus­pen­sion plat­form offers incred­i­ble climb­ing effi­cien­cy and trac­tion along with plush, down­hill-crush­ing goodness. RIDE MORE, WRENCH LESS We use bush­ings where it makes sense and bear­ings where it doesn't. The IGUS bush­ings in our low­er link are lighter, stiffer, and vir­tu­al­ly main­te­nance free. We've also added fea­tures like a thread­ed bot­tom brack­et to help make any future main­te­nance easy. INTERNAL CABLE ROUTING Inter­nal cable rout­ing doesn't have to be a pain. We've added inter­nal tubes to our tubes, no pick­sets, flash­lights, or swear words required. 2.4" TIRE CLEARANCE You can run over­built, chunky tires; you can run light, big vol­ume fast tires, but whatever you run, you're not lim­it­ed by width. 2X BOTTLE CLEARANCE The Exie has clear­ance for two water bot­tles inside the front tri­an­gle on every size frame. INTEGRATED CHAIN GUIDE Drop the ham­mer, not your chain. LIFETIME WARRANTY If it's our fault, we'll fix it. Sim­ple as that.
$3,600.00
The biggest tire clearance gravel bike we make at 2.4” wide, still with road geometry & parts to combine speed with go-anywhere capabilities. Ideal for the toughest singletrack and roads. In the box: Frame, U-Turn fork, headset, seat tube collar, front & rear Carbon-Ti thru-axle, 2 RD hangers, 3 MultiStops (1x, Di2, eTap), chainstay cable exit, noise-reduction foam sleeves, manual. Frame colors come in Orange, Turquoise, matte/gloss Grey, Brown and unpainted. - With 650b gravel or 27.5" mountain bike tires up to 2.4”(61mm), rutted singletrack, slippery roots and rocks disappear.\ - With 700c gravel tires up to 46mm, even the toughest gravel roads are tackled at lightning speed - Assembled with 700c road tires (we recommend 35-40mm wide), you have the most comfortable road bike ever invented - The U.P.'s dropped right chainstay launched a whole category of bikes. The WI.DE. doubles up. The double-drop chainstays create a very efficient box-shape behind the BB. This increases stiffness, reduces weight and boosts tire clearance. - 1x cranks eliminate the inner ring and front derailleur that limit tire clearance. Most of our customers run a classic 1x setup with 12-sp or 13-sp cassette. But you can also go 2x using the Classified system: light, fast, very efficient and clean. - Every bike company has access to the same carbon. Compared to industries like aviation, carbon volume for bikes is too small for custom or exclusive. So all those different names for proprietary carbon are just that, names. - What matters: high-modulus carbon is stiff but brittle, low modulus carbon is more flexible but tougher. You need stiff and tough, so the best layup is a blend and the ratio depends on what is most important in each area of the frame. - In some areas (main tubes for example), the blend has more high modulus (and even ultra-high modulus) carbon. Other areas (headtube for example) use more of the tough carbon. That’s how our frames are both light and durable. - Wire-Stays: Vertically thin chainstays and seatstays provide compliance, while their lateral width and layup ensure rock-solid propulsion. Truly the best of both worlds. - Flat-Out Downtube: The downtube drives stiffness, connecting your steering center to your drivetrain. The flat sides places strips of ultra-high modulus carbon where it matters most. - Zero-Setback Seattube: A zero-offset seatpost is lighter & more efficient, so we have designed our seattube angle such that most riders can use a zero-offset rather than an off-set seatpost. - Internal Routing: Internal cables & hoses through the frame stay clean & protected and frankly, they look better. In the cockpit they are exposed for easy maintenance.
$1,200.00 - $3,600.00
The Rambler continues a fine tradition in cycling, the drop bar all-arounder. It's capable of gravel centuries, quick road loops, light touring, b-roads, and of course daily life. The Rambler is a fully modern adaptation of the genre with disc brakes, thru axles and generous tire clearance. The world is vast and so are the possibilities, the Rambler invites you to fully explore them all. It has all the mounts a rider could want and geometry that is nimble while still being comfortable for long days in the saddle. As with all Wilde's we prefer bikes with higher stack heights, as our philosophy is that comfortable is fast. Being a production bike, we are able to offer this promise at a more affordable price point through our partnership with Taiwan's legendary Maxway factory. It comes in four sizes and is paired with our segmented steel fork. The steel fork does have a slightly longer axle to crown measurement than the Wayfinder which gives the bike a bit higher trail number and a slightly elevated bottom bracket height, both are bonuses when it comes to riding more challenging off-road terrain or pairing with 650b size wheels. FRAME - Tire clearance 700c X 50mm or 650b X 2.2" - Three pack mounts on top and bottom of down tube, bottle boss on seat tube - Fender mounts - Rack mounts - Compatible with 2x and 1x drivetrains - Frame weight: 5lbs (medium) STEEL FORK - Fender mounts - Double eyelet fork end - Three-pack mounts with center braze-on doubling as a mid-- blade mount - Internal dynamo routing - Mounts for Surly 8 and 24-pack racks - Tire clearance 700c X 50mm or 650b X 2.2" GEOMETRY Gravel geo with all-day comfort in mind. The taller stack height, slightly higher bottom bracket, and chatter-absorbing chainstays make the Rambler excellent for all-day explorations on pavement, dirt, and double track. Roadish head tube and seat tube angles keep everything quick and maneuverable. TUBING Wilde TLC - Tough, Light, Compliant Our own proprietary double-butted, chromoly tubeset. TLC stands for tough, light, and compliant which are the characteristics we select for. On each model and size, we select the optimum blend of tubing diameters, wall thickness, and butting profiles to yield a frame that is both built to last, as light as practical, and comfortable for the rider. FRAME SPEC - Traditional straight 1 1/8" headtube - 68 mm bottom bracket shell - Flat Mount - 142mm rear spacing - Seatpost: 27.2mm - Seat Collar: 30.0 - Cable Guides: Modular guides under the downtube, and full loop braze-ons on the stays (No Zip Ties) - 12mm Thru Axle - 1.5 x 174mm FORK SPEC - Flat Mount - 100mm spacing - 12mm Thru Axle - 1.5 x 124mm COMPLETE BIKE BUILD SPEC We are offering three stock build packages, SRAM Rival AXS, Shimano GRX, and SRAM Apex. SRAM Rival AXS 1x12 Specifications*: - SRAM Rival AXS shifters with hydraulic brakes - SRAM Rival AXS XPLR rear derailleur - SRAM Rival 1x Dub Wide 170mm crankset - SRAM XG-1251 cassette, 12 speed, 10-44 - Wolf Tooth Performance headset - Thomson 90mm stem - Thomson Elite setback seatpost - Salsa Cowbell handlebar - Stan's Crest S2 wheelset - Teravail Rutland 700c x 42 tires - WTB Volt saddle - AXS charger - SRAM Centerline 160 mm rotors Shimano GRX810/600 2x12 Specifications*: - Shimano GRX610 shifters with hydraulic brakes - Shimano GRX820 front and rear derailleurs - Shimano GRX610 crankset, 46-30, 170mm - Shimano cassette, CS-HG710, 11-34 - Wolf Tooth Performance Headset - Thomson X4 stem - Thomson Elite seatpost setback - Pro Discover 12D handlebar - WTB Volt saddle - Stan's Crest S2 Wheelset - WTB Riddler 700 x 45 tires, 60 TPI SRAM Apex 1x12 Specifications*: - SRAM Apex Hydro levers and brakes with 160mm rotors - SRAM Apex XPLR mechanical rear derailleur - SRAM Apex DUB Wide Crank 170mm 40t - SRAM Apex XPLR 11-44 cassette - SRAM Apex 12 spd. chain - Easton EA50 stem (90mm) and post - Easton EA50AX handlebar (44cm) - FSA Orbit X headset - FSA AGX i21 wheelset - WTB Riddler 700 x 45 tires, 60 TPI, tan - WTB Volt saddle * Parts subject to change without notice We can also build yours up any way you want, we'd love to create your dream machine according to your taste and budget. We work with all the major component suppliers, as well as with many small niche makers. Contact us to get started. FINISH Phosphate dipped and E.D. Coated for corrosion resistance and durability. Wet paint finish. Color: Ocean Sparkle
$3,599.00 $3,999.00 10% Off
THE TRUSTY TOOL FOR ANY TRAIL Like the reliable tool you grab for every job, the Smuggler is the go-to bike for any trail pointed up, down, and all around. With dual 29 inch wheels, 130mm rear and 140mm front travel, the Smuggler may just be the most versatile bike in our lineup. A highly progressive leverage curve and comfortable, confidence-inspiring geo make it eager to keep going mile after mile while remaining surefooted in even the most technical terrain. Sitting squarely between the Spur and Sentinel in travel, geometry, and capability, it shares qualities of both. Inspiring and rewarding to hammer on your favorite singletrack, while never holding you back when the trail gets steep, the Smuggler will make sure you enjoy it all.
$3,570.00
Voytek 2 takes what the original Voytek started and makes it better. This is a fat bike that rides like a mountain bike on snowy trails. We overhauled Voytek geometry to give you a fat bike that lets you go even faster with more confidence. Voytek 2 has adjustable geometry via the patented Tuning Chip dropout system like all Otso bikes, as well as the new GeoChip head tube system that alters geometry at the front end of the bike. It has clearance for 26” x 4.6” or 27.5” x 4.5” tires, suspension correction for a suspension fork, internal cable routing, lower standover, and several more updates. When the snow melts, swap in a 29” plus wheelset to keep the party going all year. Voytek changed the world of fat bikes when we announced it in 2016. Voytek 2 is here to do it again. ************************************************************** Angry Catfish's website is tied into Otso's available inventory. If you are visiting our store to view the bike, please contact us before coming, to ensure we have what you're looking for. ************************************************************** Narrow Q factor Voytek 2 feels more like riding a mountain bike than a bike built for 26" x 4.6" tires because it has a narrow Q factor. The Q factor of a bike is the distance between the outer surfaces of your two crank-arms. The narrower the Q factor, the more natural it feels to pedal and handle the bike because it is closer to your normal biomechanics. It also allows for stronger power transfer to the pedals, more efficient pedaling, and increased overall performance. Adjustable Geometry When pairing the GeoChip head tube system with the Tuning Chip rear dropout system, Voytek 2 geometry has unprecedented adjustability. Pair a long wheelbase with a slack head tube angle for a stable ride in deep snow. Pair a short wheelbase with a steeper head tube angle for a responsive ride on packed, tacky snow. Or mix and match based on your riding style. Customize Reach and Head Tube Angle GeoChip is a new integrated system that allows you to adjust reach and head tube angle. Three sets of flip chips nest in the frame and hold the headset upper and lower cups. One set of GeoChip flip chips allows for +/- 10mm of reach adjustment, another allows for +/- 1º of head tube angle adjustment, and the third allows for +/- 2º of head tube angle adjustment. This means that you can easily adjust your reach or head tube angle at home based on the riding ahead. With two reach options for each bike due to GeoChip, Voytek 2 effectively has eight frame sizes. Tuning Chip Rear Dropout System All Otso bikes are equipped with adjustable geometry via our patented Tuning Chip rear dropout system. The Tuning Chip can adjust the wheelbase by up to 20mm, raise or lower the bottom bracket by up to 4mm, and adjust the head tube angle by +/- 0.5º. With the machined aluminum flip chip in the rear position, Voytek 2 has a longer wheelbase, lower bottom bracket, and slacker head tube angle for confidence and stability in deeper snow. Use the front position for more responsive handling on packed trails with tight turns. A middle position chip pairs the best of both worlds. Tire Clearance and Wheel Swapping Voytek 2 can fit 26” x 4.6” or 27.5" x 4.5" tires on the stock rims. A full breakdown of tire/rim pairings can be found below in the Tech Specs. To achieve this wide tire clearance with an extremely narrow bottom bracket, the rear hub has a 5mm outboard offset to prevent chain rub. Voytek 2 can also fit 29” x 3.0” tires. So when the trails are packed with snow, ride 26” x 4.0” tires, then when the snow melts and the trails turn to dirt, swap in your 29” wheelset for plus mountain bike riding. Voytek 2 was designed to accommodate multiple wheel sizes without compromising ride quality. Modern MTB Geometry Voytek 2 builds on the geometry that we pioneered with our original Voytek. We gave Voytek 2 a slacker head tube angle, steeper seat tube angle, shorter standover. This updated geometry allows you to go faster with more confidence. Suspension Correction Voytek 2 is suspension corrected. This means that you can build it with a 120mm travel suspension fork without drastically changing the geometry of the bike with a rigid fork. Dropper Compatibility Dropper post routing has a fully internal sleeve via a port behind the head tube. The Wolf Tooth Resolve Dropper Post is an option on the Voytek 2 Custom Bike Builder. Large Front Triangle A larger front triangle means that you can fit more cargo for your ride. Use this space for a custom frame bag, two bottles, or anything else that you need to carry for the ride ahead.
Page 1 of 7 Next page