Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Gifts Under $200

Pas Normal Studios Men's Mechanism Jersey
$200.00 - $274.00
Presented in its trademark monochrome colourway, the Mechanism Jersey showcases the seamless integration of technical performance with fashionable aesthetics. Defined through its aerodynamic fit and use of lightweight fabrics, the jersey is perfectly suited to competitive races or high-paced training days, while remaining a staple for your everyday summer rides. Through the application of its highly breathable micro-perforated fabrics on the side and back panels, remarkable moisture absorption and quick-drying properties are achieved all day. Distinctive with an aggressive racing silhouette, the jersey employs fully-dyed elastic grippers along the waist and sleeves to keep it in place for an enhanced aerodynamic advantage. Fabric: 86% polyester, 14% elastane Side pocket: 100% polyester Highly breathable Zippered side pocket with protected insert Guarded zip ends Full-length YKK zipper with camlock puller Made in Italy Care instructions: Wash cool 30° / Use non bio detergent / Iron low / Do not bleach Sizing: The Mechanism Jersey is cut for an aggressive on-the-bike-position. The bottom hem of the jersey is constructed to sit slightly above your waistline. This means that the jersey is relatively short in order to avoid unnecessary bulging when sitting on the bike. Standing up-right the jersey will sit just on or slightly above the front mesh part of the bibs. Measurement guide in product photos above
45NRTH Dillinger 5 26-inch
$135.00 - $260.00
The extra width of the Dillinger 5 provides flotation over loose snow additional grip while turning, accelerating or braking on ice and packed snow. Available in both studded and non-studded configurations. The studded version comes with 258 concave, aluminum carbide tip studs to provide extra bite and increased durability
45NRTH Dillinger 4 - 27.5 Studded Fatbike Tire
$168.00 - $231.00
Riding your fat bike on ice just got even better with the redesigned Dillinger tread pattern and tubeless compatibility. 252 carefully positioned studs allow you to rail icy off-camber singletrack with confidence and control, while taller side lugs bring improved cornering in snowy conditions. Dillinger's center tread is tightly spaced for speed when you need it so you can power up an icy climb and rip down the other side as the studs claw into the slick surface.
Kitsbow Kitsuma Merino Hoodie
$195.00 - $219.00
The Kitsuma Merino Hoodie is back and now sewn in the USA. Sleek design meets high performance with our temperature-regulating Merino wool. Thoughtful details like abrasion-resistant elbow patches, secure rear pocket, and thumbholes add to its toughness and utility. - Merino/Tencel® blend for the best Merino has to offer with added durability of Tencel (87% Merino, 13% Tencel) - Super textured nylon mesh in the hood and pockets for structure and feel - Security pocket on back - Reflective piping at the shoulders and hem for safety/visibility - Schoeller® elbow/arm patches for protection and durability - Thumbholes for when layering or extra coverage - Sewn in the USA
Hope Union Race Pedals
$200.00
The Hope RC Union Clip Pedal is a small platform race clip pedal. This dual-sided pedal features a titanium spindle and a fully CNC machined pedal body, and is crafted with durability in mind. - Dual mechanism designed for easy pedal entry, secure cleat holding and positive, consistent release - Dual sided - Titanium axle as standard - Fully CNC Machined pedal bodies - Stainless steel clips and cleats - Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively - Pedals run on three cartridge bearings and a maintenance free IGUS bush for smooth long term durability - Fully serviceable and re-buildable - Race Clip pedal supplied with Titanium axle as standard - Q-Factor – 55mm
Ortlieb Back-Roller Classic (pair)
$190.00 - $200.00
Durable polyester fabric make this pannier a long lasting touring companion. The waterproof roll closure ensures safe and waterproof storage of food and equipment. With its QL2.1 fixing it is quickly mounted and taken off the bike rack. A shoulder strap provides carrying comfort when taken off the rack. - Classical rear pannier (pair) with roll closure - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10 and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Can be used individually (e.g. for shopping, sports, picknick) - Can be combined with the ORTLIEB Rack-Pack size S or M - Highly reflective Scotchlite reflector - Easy to clean inside - Optional accessories: ORTLIEB carrying system, outer pockets (size S), mesh pocket, bottle cage, 20 mm QL2.1 hook, anti-theft device long - Note: In order to meet standard IP64 (6=dustproof, 4=protected against splash water coming from all directions) the closure must be rolled 3-4 times.
POC Nivalis
$200.00
The all-encompassing brightness of glaciers places extra demands on the eyes – demands that standard sunglasses cannot meet. Features including extra protection at the sides of the eyes and extra-dark lenses make the Nivalis an optimal choice for glacier use. Adjustable temples ensure a secure fit around the ears, and snap-in hinges improve durability as the frames are less likely to break in a fall. Hydrophilic rubber nose pads and temples ensure the glasses stay firmly in place even during strenuous activity. - Hydrophilic rubber nose pads - Adjustable temples - Detachable leather side pieces with magnetic attachment on the temples - Snap hinges - Detachable lanyard Warning: The darker lenses in this model should not be used while driving.
Pas Normal Studios Men's Essential Jersey
$200.00
The easy-care, wrinkle-free, and quick-drying properties of the jersey's fabric make this an ideal addition to your wardrobe for leisure rides, long sportives, and multi-day bikepacking expeditions. With a less tight, but still sufficiently aerodynamic fit, this piece remains as equally adept to racing as it is to exploring. The jersey is constructed from high-wicking and quick-drying Italian made Sensitive® fabrics, which feature a sophisticated honeycomb construction to facilitate the circulation of air between fibres. Using super opaque microfibres, the fabric offers a higher level of protection from harmful UV rays. Extra comfort is provided through the fabric's tridimensional elasticity properties, allowing for perfect freedom of movement, impeccable wearability, and maximum retention of shape even after repeated washes. - 72% microfibre polyamide, 28% elastane - High wicking and quick drying fabrics - Fully dyed fabric - Guarded zip ends - Extended sleeve lengths - Zippered side pocket with protected insert - Robust YKK zipper with camlock puller - Abrasion resistance to eliminate fabric pilling
Swift Industries Zeitgeist Bag
$195.00 - $200.00
Our Zeitgeist Saddle Bag is a fresh take on the classic British touring saddlebag. Take advantage of the space under your saddle with a bag that is optimal for packing long day-ride and overnight supplies. The bicycle attachment feature now includes two sets of mounting points: one that matches the standard spacing of integrated saddle loops, and another that’s set further apart for use on the bars. All punches through the bag’s mounting points have been done away with, and the flap no longer has stitching through all layers of textile for enhanced weatherproofing. Improvements with handling in mind: An HDPE liner adds structure to the bag, improving its stability on the bicycle. Compression straps pull the bag close to the bicycle, keeping cargo weight compact and tight. Sizing and standard features: The Zeitgeist Bag is now available in one size, and comes standard with flap daisy chains and dee rings for versatile off-bike carry and extra dangle capacity. Cool Features: - Internal batten keeps bag rigid - Comes two Voile™ attachment straps and a p-cord cinch strap that wraps around the head-tube or seat-post - Attachment strap spacing for Brooks™ saddles - Attachment strap spacing for handlebars - Two collapsible side pockets - Telescoping neck holds stuff in place when you open the bag - Compression strap under the flap pulls the weight of your bag close to the bicycle for stable riding - Main closure straps feed back on themselves so you don’t have any danglers - Reflective detailing
Niner RDO Seat Post
$199.00 - $199.99
From the company that loves speed comes an unstiff seatpost that will smooth your world. Niner’s RDO seatpost is designed to deflect more than other carbon posts, offering a small degree of suspension that makes a big difference by the end of your ride, whether you rock the rigid singlespeed or fly the full-suspension flag. Unlike bonded seatposts which add weight in transitions between dissimilar materials, the monocoque design of the RDO Seatpost is made lighter by eliminating bonded sections altogether. In addition to the full carbon complement, the internal structure of the post is designed to disperse impact energy throughout the entire structure, damping trail vibrations and increasing fore-aft flexibility to absorb shock before it reaches your body without compromising energy transfer. We call it Unstiff Carbon Layup but we hope you’ll call it “Perfection.” Unstiff Carbon Layup deflects up to twice as much as traditional post designs, offering unparalleled comfort. Simple and strong 2-bolt clamp 0mm or 16mm setback options 27.2mm x 400mm, 30.9mm x 370mm and 31.6mm x 400mm 210-220g Backed by Niner’s C5 Carbon warranty
Niner RDO Flat top handlebar - 780 - Black/Slate
$199.00
The Flat Top RDO 780mm Handlebar features the same shape and carbon tuning for ride quality and comfort as all of Niner’s carbon components - all backed up with our C5 Carbon Warranty - a 5 year guarantee. 780mm width with cut-down marks to 720mm Bar-end compatible +/- 5mm rise via Flat Top Design, 9º Sweep 195g (full 780 width) Backed by Niner’s C5 Carbon warranty 31.8 camp diameter
Niner RDO Seatpost
$199.00
From the company that loves speed comes an unstiff seatpost that will smooth your world. Niner’s RDO seatpost is designed to deflect more than other carbon posts, offering a small degree of suspension that makes a big difference by the end of your ride, whether you rock the rigid singlespeed or fly the full-suspension flag. Unlike bonded seatposts which add weight in transitions between dissimilar materials, the monocoque design of the RDO Seatpost is made lighter by eliminating bonded sections altogether. In addition to the full carbon complement, the internal structure of the post is designed to disperse impact energy throughout the entire structure, damping trail vibrations and increasing fore-aft flexibility to absorb shock before it reaches your body without compromising energy transfer. We call it Unstiff Carbon Layup but we hope you’ll call it “Perfection.” - Unstiff Carbon Layup deflects up to twice as much as traditional post designs, offering unparalleled comfort. - Simple and strong 2-bolt clamp - 0mm or 16mm setback options - 27.2mm x 400mm, 30.9mm x 370mm and 31.6mm x 400mm 210-220g - Backed by Niner’s C5 Carbon warranty
PNW Components Loam Dropper Post
$199.00
We made this post to honor your most adventurous days on the trail. From the quadzilla climbs to the serpentine descents, the Loam Dropper capitalizes on PNW's best-in-class reliability in our shortest, lightest, and most customizable package yet. The new Loam also features swappable silicone bands that hug the midcap, giving you the opportunity to match your bike (or mood). UPGRADED TRAVEL PLANS By shortening the overall post and adding 25mm of Tool-Less Travel Adjust we’ve guaranteed you more drop across a wider variety of frame designs, sizes, and body types. This means more distraction-free descents with less awkward high fives from your saddle when the trail gets rowdy. UNDER PRESSURE Slow and controlled or swift and poppy? Dial-in your dropper’s return rate with personalized pressure, courtesy of the Loam Post’s adjustable air cartridge. MAKE IT YOURS The Loam Post features a machined channel on the mid-cap that's home to a swappable silicone band. Each post comes with our standard Blackout Black band but we offer our full range of colors to match your bike, PNW cockpit or personal chakra aura.
Salsa Men's Team Polytone Vest
$199.00
Vests are a staple of any cycling kit. From frosty mornings on your local gravel roads to unexpected temperature drops on remote bikepacking trips, these vests pack away easily and retain core warmth when it matters. - Mid–weight four season garment - Wind/water resistant - YKK zipper - 3 full–size rear pockets - Silicone gripper - Reflective tabs
Mission Workshop Acre Series Vest
$195.00
The Acre Series Vest is designed to be fast and light. Performing well under high energy activities such as cycling, running, and hiking. The Pertex shell and 40g Primaloft Gold insulation allows excess heat and vapor to escape while maintaining a radiant layer of warmth close to your core. The entire jacket packs down into the front hand warmer pocket allowing it to be highly compressed and easily carried in a jersey or side pocket. The vest makes for a great insulating mid-layer under any of our waterproof shells. - Large rear stow pocket - Hand warmer pockets - Two-way separating YKK front zip - Reflective details - Soft microfiber collar for comfort SPECIFICATIONS - Pertex® Quantum face fabrics - Insulated with PrimaLoft® 40g Gold Active+ - Made in Vietnam
Moots 3D printed Titanium Computer mount. (Only fits Moots Stems)
$195.00
We partnered with our friends at Silca to bring you this 3D Printed Titanium Computer mount for all modern Moots Stems. Keeps all the unnecessary clutter off your handlebars while improving aerodynamics and cutting weight by up to half. You'll never be riding alone with the Moots Gator printed right into the Titanium. Includes two Titanium bolts. And inserts for Garmin & Wahoo computers. If you are not familiar with Silca, they were founded in Italy in 1917 and for the last 100 years they have been world-renowned for their exceptionally durable floor pumps. In 2013, Josh Poertner a former Sram/Zipp engineer purchased and moved the brand the U.S. Since then they have expanded their product offerings, but have never strayed from their dedication to quality and durability. Like our frames, if properly cared for, most Silca items should be able to be passed along for generations.
SRAM G2 RSC Aluminum Disc Brake
$194.00
G2 RSC is the half-ton pickup truck of the mountain bike brake world—dependable, go anywhere, do anything, plenty of power when you need it, and all of the features you need. The new G2 RSC is based on the SRAM Code design, so it puts Code-like power and modulation into a mini-Code package. And, of course, the signature Guide lever-feel and contact-point adjustability ensures that this brake works great for every rider. The G2 RSC presents a rider-oriented offering with an alloy blade, lever pivot bushings, stainless steel hardware. - Useful reach and contact point adjustments for every type of rider. We design our brakes to give each individual rider distinct control of their ride. - We added stiffness in the caliper and a new pad compound that offers more bite to really deliver the Mini-Code feel. - Engineered for easy installation
White Industries CLD Front Hub - 12mm, TA, 32h
$185.50 - $193.20
Our CLD (Center Lock Disc) hubs are designed around the Center Lock splined rotor mounting interface as opposed to the 6-bolt mounting standard used on our XMR hub. The Center Lock system allows us to decrease the flange diameter which results in a slightly lighter hub that’s at home on road builds but retains the durability needed for mountain applications. Made in our shop from U.S. sourced 6061-T6 aluminum, they’re available in a range of drillings, colors, and axle configurations. A question we always get about our disc hubs is, “CLD or XMR? Which is better?”. Neither is “better” than the other. Both share the same internals and the differences really come down to the respective designs having to accommodate the two different rotor mounting interfaces. The CLD has a more compact look and is slightly lighter while the XMR has larger flanges which allows those really cool “windows” to be machined into them. Bottom line is you really can’t go wrong with either hub! Most of the time choosing is simply a matter of which disc rotor system you already have on your bike, so your choice is kind of made for you. And if you’re building a new bike, it’s not a bad idea to stick with the rotor system you’re using on your other bikes, just in case you want to swap things around. And to add to it, Shimano and SRAM don’t offer all their rotor models and sizes in both Center Lock and 6 bolt, so be aware of that when speccing out your new rig. - U.S. made 6061-T6 aluminum - Enduro ABEC 5 bearings - Easily serviceable/rebuildable - Compatible with Center Lock style rotors - Redesigned axle to allow you to use the standard Center Lock lock nut provided with Shimano rotors - Rotor lockrings not included SPECIFICATIONS - 145g - 32H drillings - 100mm O.L.D. dimension (standard fork spacing, non-boost) - 12mm Thru axle - Two Enduro ABEC 5 17287-2rs bearings
Chris King ThreadFit 24 Steel
$192.00
Our ThreadFit 24 bottom bracket is designed and built to be durable, serviceable, and silent. Manufactured to create a precise and functional interface between your frame’s bottom bracket shell and your cranks to ensure that your cranks will spin lightly and without interference. We have developed a range of conversion kits that allow our ThreadFit 24 to be used with a wide selection of road and mountain bike cranks. - Engineered, manufactured and assembled in Portland, Oregon USA - 5-year built-to-last warranty - Legendary made-in-house bearings - Responsibly lightweight - Easily serviceable with our integrated grease injection system - Find your fit with our required conversion kits - Ceramic bearing upgrade available
BTI Shutter Precision PL-7 CL-Disc Front T-A Hub, 12x100mm, 32h - Black
$190.30
High efficiency, lightweight dynamo hubs are great for powering lights, chargers and other electronics while riding - Designed for reliability in extreme conditions - 6-volt 3-watt output - axle/spacing (mm): 12x100 TA - brake: center lock disc - hole: 32h - color: black - weight: 409g
Shutter Precision PD-7 IS-Disc Front T-A Hub, 12x100mm, 32h - Black
$190.30
- High efficiency, lightweight dynamo hubs are great for powering lights, chargers and other electronics while riding - Designed for reliability in extreme conditions - 6-volt 3-watt output SPECIFICATIONS - Axle/spacing (mm): 12x100 TA - Brake: 6-bolt (IS) disc - Hole: 32h - Color: black - Weight: 419g - Flange diameter: 58mm left and 52mm right - Center to flange: 25mm left and right **We're known for our custom wheel builds. Call or text us to get started on building up a wheelset using these hubs.
45NRTH Kahva 27.5-inch Tubeless
$185.00 - $190.00
From light winter trail riding to commuting, the Kahva allows you to carve your way through winter with concave carbide studs as well as single, double and triple siped lugs. - Siping on center and side lugs lets the Kahva conform to terrain for increased grip in any riding conditions - Concave carbide studs provide traction in the iciest conditions - Directional lugs provide low rolling resistance while offering excellent braking traction - 240 carbide aluminum studs - 60 TPI
45NRTH Kahva 29-inch Tubeless
$185.00 - $190.00
From light winter trail riding to commuting, the Kahva allows you to carve your way through winter with concave carbide studs as well as single, double and triple siped lugs. - Siping on center and side lugs lets the Kahva conform to terrain for increased grip in any riding conditions - Concave carbide studs provide traction in the iciest conditions - Directional lugs provide low rolling resistance while offering excellent braking traction - 252 carbide aluminum studs - 60 TPI
ENVE M6 Mountain Handlebar 31.8mm
$190.00
Simply put, it's the perfect trail bar. The M6 bar is tuned for the dream combination of response, compliance, and high strength. Available in a traditional 25mm rise or a low 7.5mm rise, it sweeps back at 9 degrees and up 5 degrees, providing excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain. - Material: Carbon Fiber - Weight: 200g (25mm rise); 190g (7mm rise) - Bar Width (Max): 780mm - Bar Width (Min): 740mm - Clamp Diameter: 31.8mm - Sweep: 9 Degrees - Tip: 5 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm
Hope Union Trail Pedals
$190.00
The Hope TC Union Clip Pedal is a large platform trail clip pedal. This dual-sided pedal features a large shoe/pedal contact area for maximum power transfer and stability, and is crafted with durability in mind. - Dual mechanism designed for easy pedal entry, secure cleat holding and positive, consistent release - Dual sided - Fully CNC Machined pedal bodies - Stainless steel clips and cleats - Large shoe/pedal contact area for maximum power transfer and stability - Replaceable pins for increased grip (8 pins) - Pedals run on three cartridge bearings and a maintenance free IGUS bush for smooth long term durability - Fully serviceable and re-buildable - Axle is high strength Cr-Mo, heat treated and plated - Titanium axle upgrades available - Q-Factor – 55mm - Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float. - Large platform with option of 4 pins per side.
POC Tectal Helmet
$190.00
The well-ventilated Tectal has been specifically developed for aggressive trail riding and enduro racing and incorporates the aramid bridges system from POC’s proven and award-winning Trabec helmet. The reinforced EPS liner provides a high level of protection and the unibody shell construction, introduced in POC’s ground breaking Octal road cycling helmet, further enhances the safety properties and construction integrity of the helmet while maintaining a low weight. Tectal offers more coverage than conventional mountain bike helmets and has a highly efficient ventilation design, optimized and evaluated through wind tunnel testing. The lightweight size adjustment system ensures a comfortable and secure fit. - EPS liner - Outer PC shell - Unibody shell construction - Aramid fiber grid for protection and durability - Designed to provide more coverage at temples and back of head - Size adjustment system - Adjustable visor - Recco reflector - Weight: XS-S: 320g, M-L: 350g, XL-XXL: 370g
Rapha Deep Winter Glove
$190.00
The extremities are always first to suffer when the temperature drops. Keeping your fingers warm ensures a more enjoyable ride and wearing Rapha Deep Winter Gloves AW14 means you will be in for a comfortable one as well. Made for cutting edge fabrics that balance excellent levels of insulation whilst still allowing you to stay in full control of your bike. Keeping the windchill off is a stretch nylon outer material that has been treated with a Durable Water Repellent coating. Warmth comes from Primaloft insulation® and to stop your hands becoming a clammy mess the OutDry® membrane offers breathability. A poorly fitting glove makes control a nightmare, so the carefully designed shell, bonded to the OutDry® membrane is a clever addition. This also results in a glove that fits, well like a glove! Primaloft insulation® has long been the 'go to' lining for snowsports apparel. Soft and grippy so you will always feel connected to the handlebar. The outer palm is finished with a Pittard leather and comfort is provided with military grade padding. A durable glove for multiple winters of use, with reinforced wear sections. Practicalities are further catered for with the fore and index fingers designed to work with touch-screen devices. Need to wipe dirt or moisture from your face? The wipe sections mean you can wipe away to your hearts content without worrying about ruining the gloves. Keeping the cold out and the heat in, the elasticated cuffs feature a velcro tab and fit neatly over your jacket or jersey sleeve. Ideal for both day and night, with reflective detailing and logos. - Winter glove - Unisex design - Windproof nylon outer - DWR waterproof treatment - Primaloft® ONE insulation - Breathable OutDry® membrane - Brushed tricot lining - Pittards leather palm
Rapha Men's Pro Team Insulated Gilet
$190.00
The Pro Team Insulated Gilet makes use of lightweight synthetic insulation to create the perfect outer layer for hard rides in cold and dry conditions. Positioned strategically in key areas where it’s needed the most – on the front and over the shoulders – the 65gsm recycled insulation delivers class-leading warmth without the volume of down and is highly breathable, ensuring you don’t overheat during harder efforts. Equally fast-drying and hydrophobic, the gilet won’t hold moisture, allowing you to work up and sweat without wetting out. A windproof front panel with a durable water-repellent (DWR) coating keeps your chest warm, while stretch-woven side and back panels accommodate full jersey pockets. With minimal trims throughout, the gilet packs into pocket when not in use. How this was made: The Pro Team Insulated Gilet incorporates synthetic insulation made using recycled polyester. Using recycled polyester reduces our reliance on virgin materials and gives a second life to materials that would otherwise go to landfill. Overall, this change reduces our environmental impact without compromising product performance and durability. - Minimal trim for packability - DWR coating for water-resistant protection - Robust and durable construction for everyday riding - Stretch panels to accommodate full jersey pockets - Fully lined high collar for maximum protection - Two-way zip with internal placket - Outer shell: 100% Nylon - Underlayer: 100% Polyester (57% Recycled) - Side and lower-back panels: 72% Nylon/28% spandex
Hope Kids F12 Flat Pedal
$189.99
The F12 pedal is deigned, tested and manufactured in Barnoldswick with children in mind, using the same internals and platform material as our larger F20 pedal. Key Features - Pedals feature a fully CNC machined platform out of 2014 T6 aluminium with anodised finish - The axle is made of high strength Cr-Mo, heat treated and plated - Platform uses a specifically profiled platform surface to provide a grippy less aggressive surface (Compared to F20 pedal) - Each pedal uses a norglide bush and three cartridge bearings in a fully sealed chamber to give a long smooth life - Fully adjustable pins (not required) - Suitable for all ages Specs - 12 replaceable pins per pedal - 90mm x 90mm platform - Axle is high strength Cr-Mo, heat treated and plated - Pedal platform is CNC machined - Pedals run on three cartridge bearings and a norglide bush for smooth long-term durability
Revelate Designs Terrapin System - 14L
$189.00
The 14L Terrapin® System is a modular, waterproof seat pack with a removable drybag allowing for easy off-the-bike packing. In its third generation, the bag improves on stability, ease of use, and durability. Adopting features from our award-winning 8L Terrapin System, the 4L Terrapin System features Revelate's exclusive Indie-Rail attachment system. A progression from conventional bikepacking bag mounts where the rail straps are fixed to the top center of the bag, with Indie-Rail each saddle rail is cinched down hard to the sides of the bag. This feature virtually eliminates side-to-side bag sway without the need for external hardware. This is combined with a rigid internal structure and active cam buckles to prevent straps from slipping on rough terrain. New features include an external plastic bottom sheet that protects the bottom of the bag kicked-up debris like a fender. Stiffened on all sides, a composite internal top sheet provides a solid and stable platform for the strap points and transmits the vertical load to the seatpost connection. An external webbing and loop system houses a bungee and provides additional easy-access external storage. FEATURES - Indie-Rail attachment system and active cam hardware provide a super stable mount without added hardware - Radiofrequency welded drybag with air purge valve - Protective external plastic bottom frame sheet - Aluminum hardware at high-stress points - Composite internal top frame sheet - X-Pac panels that are two times as abrasion resistant as standard VX material - Foam-stiffened side panels with fiberglass compression stays - External webbing and bungee for additional storage - Carbon seatpost friendly - Compatible with Thudbuster with use of Thudbuster extension FIT - Minimum 8.5 in / 21.6 cm of tire clearance required from saddle rails - It is mandatory to check tire clearance prior to use, especially with full suspension bikes. Bag contact with a tire can cause a bad wreck and ruin your day. Tire damage to the bag is not covered by warranty. - This product is not designed for use with dropper seatposts. - This bag is for carrying soft, pliable objects. sufficiently pad any hard edge objects like cookware to prevent premature wear. - Please evaluate how your system works well before a planned trip. SPECIFICATIONS - Weight: Terrapin®: 15 oz / 425 g / Drybag: 5 oz / 142 g - Volume: Drybag: 854 in³ / 14 L - Materials: VX 21 X-Pac; Rhinotec; Drybag: 200-denier waterproof TPU laminated ripstop nylon with air purge valve. Terrapin® made in USA with domestic and imported materials. Drybag imported.
Page 1 of 12 Next page