Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Gifts Under $200

Pas Normal Studios Men's Mechanism Jersey
$200.00 - $274.00
Presented in its trademark monochrome colourway, the Mechanism Jersey showcases the seamless integration of technical performance with fashionable aesthetics. Defined through its aerodynamic fit and use of lightweight fabrics, the jersey is perfectly suited to competitive races or high-paced training days, while remaining a staple for your everyday summer rides. Through the application of its highly breathable micro-perforated fabrics on the side and back panels, remarkable moisture absorption and quick-drying properties are achieved all day. Distinctive with an aggressive racing silhouette, the jersey employs fully-dyed elastic grippers along the waist and sleeves to keep it in place for an enhanced aerodynamic advantage. Fabric: 86% polyester, 14% elastane Side pocket: 100% polyester Highly breathable Zippered side pocket with protected insert Guarded zip ends Full-length YKK zipper with camlock puller Made in Italy Care instructions: Wash cool 30° / Use non bio detergent / Iron low / Do not bleach Sizing: The Mechanism Jersey is cut for an aggressive on-the-bike-position. The bottom hem of the jersey is constructed to sit slightly above your waistline. This means that the jersey is relatively short in order to avoid unnecessary bulging when sitting on the bike. Standing up-right the jersey will sit just on or slightly above the front mesh part of the bibs. Measurement guide in product photos above
45NRTH Dillinger 5 26-inch
$135.00 - $260.00
The extra width of the Dillinger 5 provides flotation over loose snow additional grip while turning, accelerating or braking on ice and packed snow. Available in both studded and non-studded configurations. The studded version comes with 258 concave, aluminum carbide tip studs to provide extra bite and increased durability
45NRTH Dillinger 4 - 27.5 Studded Fatbike Tire
$168.00 - $231.00
Riding your fat bike on ice just got even better with the redesigned Dillinger tread pattern and tubeless compatibility. 252 carefully positioned studs allow you to rail icy off-camber singletrack with confidence and control, while taller side lugs bring improved cornering in snowy conditions. Dillinger's center tread is tightly spaced for speed when you need it so you can power up an icy climb and rip down the other side as the studs claw into the slick surface.
Kitsbow Kitsuma Merino Hoodie
$195.00 - $219.00
The Kitsuma Merino Hoodie is back and now sewn in the USA. Sleek design meets high performance with our temperature-regulating Merino wool. Thoughtful details like abrasion-resistant elbow patches, secure rear pocket, and thumbholes add to its toughness and utility. - Merino/Tencel® blend for the best Merino has to offer with added durability of Tencel (87% Merino, 13% Tencel) - Super textured nylon mesh in the hood and pockets for structure and feel - Security pocket on back - Reflective piping at the shoulders and hem for safety/visibility - Schoeller® elbow/arm patches for protection and durability - Thumbholes for when layering or extra coverage - Sewn in the USA
Hope Union Race Pedals
$200.00
The Hope RC Union Clip Pedal is a small platform race clip pedal. This dual-sided pedal features a titanium spindle and a fully CNC machined pedal body, and is crafted with durability in mind. - Dual mechanism designed for easy pedal entry, secure cleat holding and positive, consistent release - Dual sided - Titanium axle as standard - Fully CNC Machined pedal bodies - Stainless steel clips and cleats - Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively - Pedals run on three cartridge bearings and a maintenance free IGUS bush for smooth long term durability - Fully serviceable and re-buildable - Race Clip pedal supplied with Titanium axle as standard - Q-Factor – 55mm
Ortlieb Back-Roller Classic (pair)
$190.00 - $200.00
Durable polyester fabric make this pannier a long lasting touring companion. The waterproof roll closure ensures safe and waterproof storage of food and equipment. With its QL2.1 fixing it is quickly mounted and taken off the bike rack. A shoulder strap provides carrying comfort when taken off the rack. - Classical rear pannier (pair) with roll closure - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10 and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Can be used individually (e.g. for shopping, sports, picknick) - Can be combined with the ORTLIEB Rack-Pack size S or M - Highly reflective Scotchlite reflector - Easy to clean inside - Optional accessories: ORTLIEB carrying system, outer pockets (size S), mesh pocket, bottle cage, 20 mm QL2.1 hook, anti-theft device long - Note: In order to meet standard IP64 (6=dustproof, 4=protected against splash water coming from all directions) the closure must be rolled 3-4 times.
POC Nivalis
$200.00
The all-encompassing brightness of glaciers places extra demands on the eyes – demands that standard sunglasses cannot meet. Features including extra protection at the sides of the eyes and extra-dark lenses make the Nivalis an optimal choice for glacier use. Adjustable temples ensure a secure fit around the ears, and snap-in hinges improve durability as the frames are less likely to break in a fall. Hydrophilic rubber nose pads and temples ensure the glasses stay firmly in place even during strenuous activity. - Hydrophilic rubber nose pads - Adjustable temples - Detachable leather side pieces with magnetic attachment on the temples - Snap hinges - Detachable lanyard Warning: The darker lenses in this model should not be used while driving.
Pas Normal Studios Men's Essential Jersey
$200.00
The easy-care, wrinkle-free, and quick-drying properties of the jersey's fabric make this an ideal addition to your wardrobe for leisure rides, long sportives, and multi-day bikepacking expeditions. With a less tight, but still sufficiently aerodynamic fit, this piece remains as equally adept to racing as it is to exploring. The jersey is constructed from high-wicking and quick-drying Italian made Sensitive® fabrics, which feature a sophisticated honeycomb construction to facilitate the circulation of air between fibres. Using super opaque microfibres, the fabric offers a higher level of protection from harmful UV rays. Extra comfort is provided through the fabric's tridimensional elasticity properties, allowing for perfect freedom of movement, impeccable wearability, and maximum retention of shape even after repeated washes. - 72% microfibre polyamide, 28% elastane - High wicking and quick drying fabrics - Fully dyed fabric - Guarded zip ends - Extended sleeve lengths - Zippered side pocket with protected insert - Robust YKK zipper with camlock puller - Abrasion resistance to eliminate fabric pilling
Swift Industries Zeitgeist Bag
$195.00 - $200.00
Our Zeitgeist Saddle Bag is a fresh take on the classic British touring saddlebag. Take advantage of the space under your saddle with a bag that is optimal for packing long day-ride and overnight supplies. The bicycle attachment feature now includes two sets of mounting points: one that matches the standard spacing of integrated saddle loops, and another that’s set further apart for use on the bars. All punches through the bag’s mounting points have been done away with, and the flap no longer has stitching through all layers of textile for enhanced weatherproofing. Improvements with handling in mind: An HDPE liner adds structure to the bag, improving its stability on the bicycle. Compression straps pull the bag close to the bicycle, keeping cargo weight compact and tight. Sizing and standard features: The Zeitgeist Bag is now available in one size, and comes standard with flap daisy chains and dee rings for versatile off-bike carry and extra dangle capacity. Cool Features: - Internal batten keeps bag rigid - Comes two Voile™ attachment straps and a p-cord cinch strap that wraps around the head-tube or seat-post - Attachment strap spacing for Brooks™ saddles - Attachment strap spacing for handlebars - Two collapsible side pockets - Telescoping neck holds stuff in place when you open the bag - Compression strap under the flap pulls the weight of your bag close to the bicycle for stable riding - Main closure straps feed back on themselves so you don’t have any danglers - Reflective detailing
Niner RDO Seat Post
$199.00 - $199.99
From the company that loves speed comes an unstiff seatpost that will smooth your world. Niner’s RDO seatpost is designed to deflect more than other carbon posts, offering a small degree of suspension that makes a big difference by the end of your ride, whether you rock the rigid singlespeed or fly the full-suspension flag. Unlike bonded seatposts which add weight in transitions between dissimilar materials, the monocoque design of the RDO Seatpost is made lighter by eliminating bonded sections altogether. In addition to the full carbon complement, the internal structure of the post is designed to disperse impact energy throughout the entire structure, damping trail vibrations and increasing fore-aft flexibility to absorb shock before it reaches your body without compromising energy transfer. We call it Unstiff Carbon Layup but we hope you’ll call it “Perfection.” Unstiff Carbon Layup deflects up to twice as much as traditional post designs, offering unparalleled comfort. Simple and strong 2-bolt clamp 0mm or 16mm setback options 27.2mm x 400mm, 30.9mm x 370mm and 31.6mm x 400mm 210-220g Backed by Niner’s C5 Carbon warranty
Niner RDO Flat top handlebar - 780 - Black/Slate
$199.00
The Flat Top RDO 780mm Handlebar features the same shape and carbon tuning for ride quality and comfort as all of Niner’s carbon components - all backed up with our C5 Carbon Warranty - a 5 year guarantee. 780mm width with cut-down marks to 720mm Bar-end compatible +/- 5mm rise via Flat Top Design, 9º Sweep 195g (full 780 width) Backed by Niner’s C5 Carbon warranty 31.8 camp diameter
Niner RDO Seatpost
$199.00
From the company that loves speed comes an unstiff seatpost that will smooth your world. Niner’s RDO seatpost is designed to deflect more than other carbon posts, offering a small degree of suspension that makes a big difference by the end of your ride, whether you rock the rigid singlespeed or fly the full-suspension flag. Unlike bonded seatposts which add weight in transitions between dissimilar materials, the monocoque design of the RDO Seatpost is made lighter by eliminating bonded sections altogether. In addition to the full carbon complement, the internal structure of the post is designed to disperse impact energy throughout the entire structure, damping trail vibrations and increasing fore-aft flexibility to absorb shock before it reaches your body without compromising energy transfer. We call it Unstiff Carbon Layup but we hope you’ll call it “Perfection.” - Unstiff Carbon Layup deflects up to twice as much as traditional post designs, offering unparalleled comfort. - Simple and strong 2-bolt clamp - 0mm or 16mm setback options - 27.2mm x 400mm, 30.9mm x 370mm and 31.6mm x 400mm 210-220g - Backed by Niner’s C5 Carbon warranty
PNW Components Loam Dropper Post
$199.00
We made this post to honor your most adventurous days on the trail. From the quadzilla climbs to the serpentine descents, the Loam Dropper capitalizes on PNW's best-in-class reliability in our shortest, lightest, and most customizable package yet. The new Loam also features swappable silicone bands that hug the midcap, giving you the opportunity to match your bike (or mood). UPGRADED TRAVEL PLANS By shortening the overall post and adding 25mm of Tool-Less Travel Adjust we’ve guaranteed you more drop across a wider variety of frame designs, sizes, and body types. This means more distraction-free descents with less awkward high fives from your saddle when the trail gets rowdy. UNDER PRESSURE Slow and controlled or swift and poppy? Dial-in your dropper’s return rate with personalized pressure, courtesy of the Loam Post’s adjustable air cartridge. MAKE IT YOURS The Loam Post features a machined channel on the mid-cap that's home to a swappable silicone band. Each post comes with our standard Blackout Black band but we offer our full range of colors to match your bike, PNW cockpit or personal chakra aura.
Salsa Men's Team Polytone Vest
$199.00
Vests are a staple of any cycling kit. From frosty mornings on your local gravel roads to unexpected temperature drops on remote bikepacking trips, these vests pack away easily and retain core warmth when it matters. - Mid–weight four season garment - Wind/water resistant - YKK zipper - 3 full–size rear pockets - Silicone gripper - Reflective tabs
Mission Workshop Acre Series Vest
$195.00
The Acre Series Vest is designed to be fast and light. Performing well under high energy activities such as cycling, running, and hiking. The Pertex shell and 40g Primaloft Gold insulation allows excess heat and vapor to escape while maintaining a radiant layer of warmth close to your core. The entire jacket packs down into the front hand warmer pocket allowing it to be highly compressed and easily carried in a jersey or side pocket. The vest makes for a great insulating mid-layer under any of our waterproof shells. - Large rear stow pocket - Hand warmer pockets - Two-way separating YKK front zip - Reflective details - Soft microfiber collar for comfort SPECIFICATIONS - Pertex® Quantum face fabrics - Insulated with PrimaLoft® 40g Gold Active+ - Made in Vietnam
Moots 3D printed Titanium Computer mount. (Only fits Moots Stems)
$195.00
We partnered with our friends at Silca to bring you this 3D Printed Titanium Computer mount for all modern Moots Stems. Keeps all the unnecessary clutter off your handlebars while improving aerodynamics and cutting weight by up to half. You'll never be riding alone with the Moots Gator printed right into the Titanium. Includes two Titanium bolts. And inserts for Garmin & Wahoo computers. If you are not familiar with Silca, they were founded in Italy in 1917 and for the last 100 years they have been world-renowned for their exceptionally durable floor pumps. In 2013, Josh Poertner a former Sram/Zipp engineer purchased and moved the brand the U.S. Since then they have expanded their product offerings, but have never strayed from their dedication to quality and durability. Like our frames, if properly cared for, most Silca items should be able to be passed along for generations.
SRAM G2 RSC Aluminum Disc Brake
$194.00
G2 RSC is the half-ton pickup truck of the mountain bike brake world—dependable, go anywhere, do anything, plenty of power when you need it, and all of the features you need. The new G2 RSC is based on the SRAM Code design, so it puts Code-like power and modulation into a mini-Code package. And, of course, the signature Guide lever-feel and contact-point adjustability ensures that this brake works great for every rider. The G2 RSC presents a rider-oriented offering with an alloy blade, lever pivot bushings, stainless steel hardware. - Useful reach and contact point adjustments for every type of rider. We design our brakes to give each individual rider distinct control of their ride. - We added stiffness in the caliper and a new pad compound that offers more bite to really deliver the Mini-Code feel. - Engineered for easy installation
White Industries CLD Front Hub - 12mm, TA, 32h
$185.50 - $193.20
Our CLD (Center Lock Disc) hubs are designed around the Center Lock splined rotor mounting interface as opposed to the 6-bolt mounting standard used on our XMR hub. The Center Lock system allows us to decrease the flange diameter which results in a slightly lighter hub that’s at home on road builds but retains the durability needed for mountain applications. Made in our shop from U.S. sourced 6061-T6 aluminum, they’re available in a range of drillings, colors, and axle configurations. A question we always get about our disc hubs is, “CLD or XMR? Which is better?”. Neither is “better” than the other. Both share the same internals and the differences really come down to the respective designs having to accommodate the two different rotor mounting interfaces. The CLD has a more compact look and is slightly lighter while the XMR has larger flanges which allows those really cool “windows” to be machined into them. Bottom line is you really can’t go wrong with either hub! Most of the time choosing is simply a matter of which disc rotor system you already have on your bike, so your choice is kind of made for you. And if you’re building a new bike, it’s not a bad idea to stick with the rotor system you’re using on your other bikes, just in case you want to swap things around. And to add to it, Shimano and SRAM don’t offer all their rotor models and sizes in both Center Lock and 6 bolt, so be aware of that when speccing out your new rig. - U.S. made 6061-T6 aluminum - Enduro ABEC 5 bearings - Easily serviceable/rebuildable - Compatible with Center Lock style rotors - Redesigned axle to allow you to use the standard Center Lock lock nut provided with Shimano rotors - Rotor lockrings not included SPECIFICATIONS - 145g - 32H drillings - 100mm O.L.D. dimension (standard fork spacing, non-boost) - 12mm Thru axle - Two Enduro ABEC 5 17287-2rs bearings
Chris King ThreadFit 24 Steel
$192.00
Our ThreadFit 24 bottom bracket is designed and built to be durable, serviceable, and silent. Manufactured to create a precise and functional interface between your frame’s bottom bracket shell and your cranks to ensure that your cranks will spin lightly and without interference. We have developed a range of conversion kits that allow our ThreadFit 24 to be used with a wide selection of road and mountain bike cranks. - Engineered, manufactured and assembled in Portland, Oregon USA - 5-year built-to-last warranty - Legendary made-in-house bearings - Responsibly lightweight - Easily serviceable with our integrated grease injection system - Find your fit with our required conversion kits - Ceramic bearing upgrade available
BTI Shutter Precision PL-7 CL-Disc Front T-A Hub, 12x100mm, 32h - Black
$190.30
High efficiency, lightweight dynamo hubs are great for powering lights, chargers and other electronics while riding - Designed for reliability in extreme conditions - 6-volt 3-watt output - axle/spacing (mm): 12x100 TA - brake: center lock disc - hole: 32h - color: black - weight: 409g
Shutter Precision PD-7 IS-Disc Front T-A Hub, 12x100mm, 32h - Black
$190.30
- High efficiency, lightweight dynamo hubs are great for powering lights, chargers and other electronics while riding - Designed for reliability in extreme conditions - 6-volt 3-watt output SPECIFICATIONS - Axle/spacing (mm): 12x100 TA - Brake: 6-bolt (IS) disc - Hole: 32h - Color: black - Weight: 419g - Flange diameter: 58mm left and 52mm right - Center to flange: 25mm left and right **We're known for our custom wheel builds. Call or text us to get started on building up a wheelset using these hubs.
45NRTH Kahva 27.5-inch Tubeless
$185.00 - $190.00
From light winter trail riding to commuting, the Kahva allows you to carve your way through winter with concave carbide studs as well as single, double and triple siped lugs. - Siping on center and side lugs lets the Kahva conform to terrain for increased grip in any riding conditions - Concave carbide studs provide traction in the iciest conditions - Directional lugs provide low rolling resistance while offering excellent braking traction - 240 carbide aluminum studs - 60 TPI
45NRTH Kahva 29-inch Tubeless
$185.00 - $190.00
From light winter trail riding to commuting, the Kahva allows you to carve your way through winter with concave carbide studs as well as single, double and triple siped lugs. - Siping on center and side lugs lets the Kahva conform to terrain for increased grip in any riding conditions - Concave carbide studs provide traction in the iciest conditions - Directional lugs provide low rolling resistance while offering excellent braking traction - 252 carbide aluminum studs - 60 TPI
ENVE M6 Mountain Handlebar 31.8mm
$190.00
Simply put, it's the perfect trail bar. The M6 bar is tuned for the dream combination of response, compliance, and high strength. Available in a traditional 25mm rise or a low 7.5mm rise, it sweeps back at 9 degrees and up 5 degrees, providing excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain. - Material: Carbon Fiber - Weight: 200g (25mm rise); 190g (7mm rise) - Bar Width (Max): 780mm - Bar Width (Min): 740mm - Clamp Diameter: 31.8mm - Sweep: 9 Degrees - Tip: 5 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm
Hope Union Trail Pedals
$190.00
The Hope TC Union Clip Pedal is a large platform trail clip pedal. This dual-sided pedal features a large shoe/pedal contact area for maximum power transfer and stability, and is crafted with durability in mind. - Dual mechanism designed for easy pedal entry, secure cleat holding and positive, consistent release - Dual sided - Fully CNC Machined pedal bodies - Stainless steel clips and cleats - Large shoe/pedal contact area for maximum power transfer and stability - Replaceable pins for increased grip (8 pins) - Pedals run on three cartridge bearings and a maintenance free IGUS bush for smooth long term durability - Fully serviceable and re-buildable - Axle is high strength Cr-Mo, heat treated and plated - Titanium axle upgrades available - Q-Factor – 55mm - Pedals supplied with two cleats options; 4°or 5° of free float and 12° or 13° release angle respectively. Both cleats also allow 2mm of lateral (side to side) float. - Large platform with option of 4 pins per side.
POC Tectal Helmet
$190.00
The well-ventilated Tectal has been specifically developed for aggressive trail riding and enduro racing and incorporates the aramid bridges system from POC’s proven and award-winning Trabec helmet. The reinforced EPS liner provides a high level of protection and the unibody shell construction, introduced in POC’s ground breaking Octal road cycling helmet, further enhances the safety properties and construction integrity of the helmet while maintaining a low weight. Tectal offers more coverage than conventional mountain bike helmets and has a highly efficient ventilation design, optimized and evaluated through wind tunnel testing. The lightweight size adjustment system ensures a comfortable and secure fit. - EPS liner - Outer PC shell - Unibody shell construction - Aramid fiber grid for protection and durability - Designed to provide more coverage at temples and back of head - Size adjustment system - Adjustable visor - Recco reflector - Weight: XS-S: 320g, M-L: 350g, XL-XXL: 370g
Rapha Deep Winter Glove
$190.00
The extremities are always first to suffer when the temperature drops. Keeping your fingers warm ensures a more enjoyable ride and wearing Rapha Deep Winter Gloves AW14 means you will be in for a comfortable one as well. Made for cutting edge fabrics that balance excellent levels of insulation whilst still allowing you to stay in full control of your bike. Keeping the windchill off is a stretch nylon outer material that has been treated with a Durable Water Repellent coating. Warmth comes from Primaloft insulation® and to stop your hands becoming a clammy mess the OutDry® membrane offers breathability. A poorly fitting glove makes control a nightmare, so the carefully designed shell, bonded to the OutDry® membrane is a clever addition. This also results in a glove that fits, well like a glove! Primaloft insulation® has long been the 'go to' lining for snowsports apparel. Soft and grippy so you will always feel connected to the handlebar. The outer palm is finished with a Pittard leather and comfort is provided with military grade padding. A durable glove for multiple winters of use, with reinforced wear sections. Practicalities are further catered for with the fore and index fingers designed to work with touch-screen devices. Need to wipe dirt or moisture from your face? The wipe sections mean you can wipe away to your hearts content without worrying about ruining the gloves. Keeping the cold out and the heat in, the elasticated cuffs feature a velcro tab and fit neatly over your jacket or jersey sleeve. Ideal for both day and night, with reflective detailing and logos. - Winter glove - Unisex design - Windproof nylon outer - DWR waterproof treatment - Primaloft® ONE insulation - Breathable OutDry® membrane - Brushed tricot lining - Pittards leather palm
Rapha Men's Pro Team Insulated Gilet
$190.00
The Pro Team Insulated Gilet makes use of lightweight synthetic insulation to create the perfect outer layer for hard rides in cold and dry conditions. Positioned strategically in key areas where it’s needed the most – on the front and over the shoulders – the 65gsm recycled insulation delivers class-leading warmth without the volume of down and is highly breathable, ensuring you don’t overheat during harder efforts. Equally fast-drying and hydrophobic, the gilet won’t hold moisture, allowing you to work up and sweat without wetting out. A windproof front panel with a durable water-repellent (DWR) coating keeps your chest warm, while stretch-woven side and back panels accommodate full jersey pockets. With minimal trims throughout, the gilet packs into pocket when not in use. How this was made: The Pro Team Insulated Gilet incorporates synthetic insulation made using recycled polyester. Using recycled polyester reduces our reliance on virgin materials and gives a second life to materials that would otherwise go to landfill. Overall, this change reduces our environmental impact without compromising product performance and durability. - Minimal trim for packability - DWR coating for water-resistant protection - Robust and durable construction for everyday riding - Stretch panels to accommodate full jersey pockets - Fully lined high collar for maximum protection - Two-way zip with internal placket - Outer shell: 100% Nylon - Underlayer: 100% Polyester (57% Recycled) - Side and lower-back panels: 72% Nylon/28% spandex
Hope Kids F12 Flat Pedal
$189.99
The F12 pedal is deigned, tested and manufactured in Barnoldswick with children in mind, using the same internals and platform material as our larger F20 pedal. Key Features - Pedals feature a fully CNC machined platform out of 2014 T6 aluminium with anodised finish - The axle is made of high strength Cr-Mo, heat treated and plated - Platform uses a specifically profiled platform surface to provide a grippy less aggressive surface (Compared to F20 pedal) - Each pedal uses a norglide bush and three cartridge bearings in a fully sealed chamber to give a long smooth life - Fully adjustable pins (not required) - Suitable for all ages Specs - 12 replaceable pins per pedal - 90mm x 90mm platform - Axle is high strength Cr-Mo, heat treated and plated - Pedal platform is CNC machined - Pedals run on three cartridge bearings and a norglide bush for smooth long-term durability
Revelate Designs Terrapin System - 14L
$189.00
The 14L Terrapin® System is a modular, waterproof seat pack with a removable drybag allowing for easy off-the-bike packing. In its third generation, the bag improves on stability, ease of use, and durability. Adopting features from our award-winning 8L Terrapin System, the 4L Terrapin System features Revelate's exclusive Indie-Rail attachment system. A progression from conventional bikepacking bag mounts where the rail straps are fixed to the top center of the bag, with Indie-Rail each saddle rail is cinched down hard to the sides of the bag. This feature virtually eliminates side-to-side bag sway without the need for external hardware. This is combined with a rigid internal structure and active cam buckles to prevent straps from slipping on rough terrain. New features include an external plastic bottom sheet that protects the bottom of the bag kicked-up debris like a fender. Stiffened on all sides, a composite internal top sheet provides a solid and stable platform for the strap points and transmits the vertical load to the seatpost connection. An external webbing and loop system houses a bungee and provides additional easy-access external storage. FEATURES - Indie-Rail attachment system and active cam hardware provide a super stable mount without added hardware - Radiofrequency welded drybag with air purge valve - Protective external plastic bottom frame sheet - Aluminum hardware at high-stress points - Composite internal top frame sheet - X-Pac panels that are two times as abrasion resistant as standard VX material - Foam-stiffened side panels with fiberglass compression stays - External webbing and bungee for additional storage - Carbon seatpost friendly - Compatible with Thudbuster with use of Thudbuster extension FIT - Minimum 8.5 in / 21.6 cm of tire clearance required from saddle rails - It is mandatory to check tire clearance prior to use, especially with full suspension bikes. Bag contact with a tire can cause a bad wreck and ruin your day. Tire damage to the bag is not covered by warranty. - This product is not designed for use with dropper seatposts. - This bag is for carrying soft, pliable objects. sufficiently pad any hard edge objects like cookware to prevent premature wear. - Please evaluate how your system works well before a planned trip. SPECIFICATIONS - Weight: Terrapin®: 15 oz / 425 g / Drybag: 5 oz / 142 g - Volume: Drybag: 854 in³ / 14 L - Materials: VX 21 X-Pac; Rhinotec; Drybag: 200-denier waterproof TPU laminated ripstop nylon with air purge valve. Terrapin® made in USA with domestic and imported materials. Drybag imported.
Chris King InSet i7 Headset - 1-1/8 - 1.5
$188.00
The Chris King InSet 7 combines seamless design and quality in a 44mm headset with an external lower cup that is a precision headset option for your 1.5” tapered steerer fork. the InSet 7 is equipped with exclusive built-in-house bearings and patented GripLock system for precise fit and function. - Inset 7 has 44mm upper internal cup, 44mm lower external cup, 1.5" Baseplate - Engineered, manufactured and assembled in Portland, Oregon USA - Designed specifically for a 44mm straight headtube and a 1-1/8” to 1.5” tapered steerer tube SPECIFICATIONS - Color: Black - Crown Race: 40 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless - Bearing Type: Cartridge - S.H.I.S Lower: EC44 - S.H.I.S Upper: ZS44 - Lower Stack Height: 14 - Weight: 160g - Upper Stack Height: 8.2
Chris King InSet i8 Headset - 1-1/8 - 1-1/4
$188.00
Contemporary bicycle frame designs are incorporating larger diameter headtubes and forks with tapered-steerers to improve the bike’s front end stiffness, and as a result handling accuracy. This move has made particular sense for off-road bikes. We evolved the form and function of our legendary NoThreadset to address the variety of tapered steerers and headtubes on the market today. Why You Want It Every Chris King headset is built with our heat-treated bearings, and surgical-grade steel races machined simultaneously to ensure they are perfectly matched. As Chris King bearing tracks age and burnish, they actually get smoother, and all headsets are fully serviceable for years upon years of demanding riding. Built for the next generation of tapered road forks the Chris King InSet™ 8 is built to fit contemporary road and cross bikes that utilize 1-1/8” to 1-1/4”tapered steerer tubes and a 44mm headtube. Our InSet™ 8 combines our exclusive Chris King built bearings and our GripLock® retention system for unequalled riding quality. - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Legendary made-in-house bearings - Patented GripLock® retention design for dependable headset adjustment (US Patent 8662517) - Responsibly lightweight - Designed specifically for a 44mm straight headtube and a 1-1/8” to 1-1/4” tapered steerer tube
Chris King NoThreadSet Headset - 1-1/8
$188.00
Headtube and fork steerer standards have proliferated in recent years, but for a long, long time these variables were more fixed, so we made thousands upon thousands of NoThreadsets™ to serve bikes with unthreaded fork steerers. We made them in a variety of diameters, and everyone was happy in the land. We still make it, because it’s still a great headset for all those bikes that are still rolling through the world with a headset that will never die. Why You Want It For decades our NoThreadSet™ set the standard for quality headset function delivering precision performance to numerous world champions, grand tour winners, and aspiring riders around the world. Every Chris King headset is built with our heat-treated bearings, and surgical-grade steel races machined simultaneously to ensure they are perfectly matched. As Chris King bearing tracks age and burnish, they actually get smoother, and all headsets are fully serviceable for years upon years of demanding riding. - Engineered, manufactured and assembled in Portland, Oregon USA - King Lifetime Warranty - Legendary made-in-house bearings - Patented GripLock® retention design for dependable headset adjustment (US Patent 8662517) (1-1/8” only) - Available in 9 beautifully anodized colors in both bold and sotto voce marking options - Responsibly lightweight
HED Belgium G Rim - 700C, Disc, Black, 32 Hole
$185.00
HED Belgium G alloy rims make any custom wheel build that much sweeter. With 30mm external and 25mm internal widths, you can add tire volume, smoothness, and rolling speed to any bike or hub set. All Belgium rims feature a welded rim joint, and are drilled for a standard presta valve. Spoke drilling is down the centerline of the rim (not offset). Please carefully read the specifications below to find out detailed information on the different rims we offer. SPECIFICATIONS - Belgium G Disc clincher 700c - Tire Type: Clincher (tubeless compatible) - Rim Width (External): 30mm - Rim Depth: 24mm - Hole Count: 32 (24 & 28 are also available. Contact us) - Color: Black - Brake Track: N/A - Wheel Size: 700c - Weight: 453 grams - Max Pressure: 80psi - ERD: 592mm Angry Catfish Bicycle is known for our custom wheel builds. Call or text us to get started on your custom wheel build.
Hope F20 Platform Pedals
$185.00
- Pedals feature a fully CNC-machined platform out of 2014 T6 aluminium with anodized finish - The axle is made of high strength Cr-Mo, heat-treated and plated - The platform is slightly concave in shape to give maximum support - Each pedal uses a norglide bushing and three cartridge bearings in a fully sealed chamber to give a long smooth life - Replaceable pins per pedal provide excellent traction and grip. (Titanium and hollow pins available)
Mission Workshop Mission Pro Jersey - Men's
$185.00
Our Men's Pro Jersey is designed to provide a sleek fit and second-skin comfort no matter your body type or position on the bike. With details that include a longer cut back panel for coverage when in the drops, a low collar that won't constrict and a sweatband along the back of the neck, this jersey is a perfect fit whether you're smashing at the front or adventuring backroads day after day. - Made in Italy and assembled from a unique breathable and quick drying fabric designed to maintain a next-to-skin but not overly-compressive fit. - Details include a longer cut back panel for coverage when in the drops, a low collar that won't constrict and a sweatband along the back of the neck. SPECIFICATIONS - Breathable - Quick Drying - Full Zip - Sweatband back of neck - Three rear cycling pockets - One zippered compartment - Reflective highlight on back - Made in Italy
Mission Workshop Mission Pro Jersey - Women's
$185.00
Our Women's Pro Jersey is designed to provide a sleek fit and second-skin comfort no matter your body type or position on the bike. With details that include a longer cut back panel for coverage when in the drops, a low collar that won't constrict and a sweatband along the back of the neck, this jersey is a perfect fit whether you’re smashing at the front or adventuring backroads day after day. - Made in Italy and assembled from a unique breathable and quick drying fabric designed to maintain a next-to-skin but not overly-compressive fit. - Details include a longer cut back panel for coverage when in the drops, a low collar that won't constrict and a sweatband along the back of the neck. SPECIFICATIONS - Breathable - Quick Drying - Full Zip - Sweatband back of neck - Three rear cycling pockets - One zippered compartment - Reflective highlight on back - Made in Italy
Pas Normal Studios Escapism Fleece Gilet
$185.00
A warm style designed for mid-season layering on the streets or the trails. Kept secure with its YKK double zipper, this new addition to the fleece set is completed with a funnel neck to protect against chilly drafts. Constructed from Polartec 100 Fleece, the lofted structure of this recycled, synthetic yarn creates thermal air pockets to retain warmth and still allows breathability. Hosting two zippered front pockets and complementary chest and back pockets, the gilet boasts functionality and style while maintaining a soft and luxurious feel. - Polartec® 100 Fleece - Woven Swedish nylon details - Pilling resistant - Fast drying and durable - YKK double zipper - Branded Road to Nowhere zip pullers - Protective funnel neck - Printed logo on chest and back pockets - Made in Lithuania
Revelate Designs Ripio Frame Bag
$185.00
If miles upon miles of open dirt roads are your calling, the Ripio® frame bag will haul your stuff. The Ripio is the full-frame solution for your road, gravel or touring bike. With geometry optimized for frames with tall top tubes & head tubes, the Ripio fits a huge range of bikes and is packed with features that make use of the larger frame space road geometry provides. Features - Zipstretch ™ construction - Pairs a bomber, wetsuit style molded-tooth zipper with our exclusive stretch Cordura panels that reduce zipper stress when closing bag - X-Pac panels that are two times as abrasion resistant as standard VX material - Industry leading #10 molded tooth zippers with urethane coated tape are basically impervious to dirt and grit that destroy more commonly used water resistant coil zippers - Exit port in main compartment for hydration tube or wires - Zippered left side pocket with dividers that organizes small items - Lower zippered compartment with horizontal divider that opens to create one large compartment - Additional vertical divider in top section of LG & XL sizes to avoid leg interference - Urethane coated webbing for easy cleaning, movable velcro one-wrap attachments for frame fitting - Front top tube attachments accommodate top tube packs - Made in the USA with domestic and imported materials Specs Weight: - SM: 8 oz / 227 g - MD: 14 oz / 397 g - LG: 16 oz / 454 g - XL: 18.5 oz / 425 g Volume: - SM: 305 in³ / 5 L - MD: 385 in³ / 6.3 L - LG: 470 in³ / 7.7 L - XL: 550 in³ / 9 L Materials: - Dimension Polyant VX-21 with abrasion resistant finish; TPU laminated stretch woven Cordura; 1050 denier domestic ballistics nylon; 420 denier diamond ripstop lining with full perimeter foam padded tube sections.
Revelate Designs Ripio Frame Bag
$185.00
If miles upon miles of open dirt roads are your calling, the Ripio® frame bag will haul your stuff. The Ripio is the full-frame solution for your road, gravel or touring bike. With geometry optimized for frames with tall top tubes & head tubes, the Ripio fits a huge range of bikes and is packed with features that make use of the larger frame space road geometry provides. - Zipstretch ™ construction - Pairs a bomber, wetsuit style molded-tooth zipper with our exclusive stretch Cordura panels that reduce zipper stress when closing bag - X-Pac panels that are two times as abrasion resistant as standard VX material - Industry-leading #10 molded tooth zippers with urethane coated tape are basically impervious to dirt and grit that destroy more commonly used water resistant coil zippers - Exit port in main compartment for hydration tube or wires - Zippered left side pocket with dividers that organizes small items - Lower zippered compartment with horizontal divider that opens to create one large compartment - Additional vertical divider in top section of LG & XL sizes to avoid leg interference - Urethane coated webbing for easy cleaning, movable velcro one-wrap attachments for frame fitting - Front top tube attachments accommodate top tube packs - Made in the USA with domestic and imported materials SPECIFICATIONS Weight: SM: 8 oz / 227 g MD: 14 oz / 397 g LG: 16 oz / 454 g XL: 18.5 oz / 425 g Volume: SM: 305 in³ / 5 L MD: 385 in³ / 6.3 L LG: 470 in³ / 7.7 L XL: 550 in³ / 9 L Materials: Dimension Polyant VX-21 with abrasion-resistant finish; TPU laminated stretch woven Cordura; 1050 denier domestic ballistics nylon; 420 denier diamond ripstop lining with full perimeter foam padded tube sections.
Revelate Designs Spinelock Seat Bag
$179.00 - $185.00
The Revelate Designs Spinelock Seat Bag integrates user-tested and approved features like a one-way air purge valve, rear light slots, loop and bungee deck, and an external plastic bottom with a new patented attachment system built for stability. - Innovative Spinelock stability system completely eliminates side to side sway - Two mounting positions to accommodate seatpost setback and saddle adjustments - Quick-release bag from the bike - One way, low profile, air purge valve - Carbon seatpost friendly - Top-mounted external webbing and bungee for additional storage
SRAM Rival eTap AXS Front Derailleur
$185.00
The precision and reliability of eTap AXS, now at a whole new level. The Rival eTap AXS front derailleur is optimized for X-Range chainrings and uses Yaw technology, so there's no need for trim. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - AXS-enabled for easy personalization - Crisp and accurate front shifts - SRAM Yaw trimless cage technology optimized for use with 46/33T or 48/35T X-Range chainrings - Designed for standard chainline eTap AXS cranks - Battery Not Included
SRAM Rival eTap AXS Wide Front Derailleur
$185.00
The Rival eTap AXS wide front derailleur is optimized for smaller X-Range chainrings on wide cranks and uses Yaw technology so there's no need for trim. Its wider position on the bike also provides clearance for extra wide tires, so you can venture far beyond the beaten path. - Wireless electronic eTap shift logic for intuitive shifting, easy setup, and reliability - For wide cranksets with 43/30T chainrings - Additional clearance for 700x45c and 27.5x2.1" tires - Crisp and accurate front shifts - AXS enabled for easy personalization - Battery Not Included
Silca Impero Ultimate Frame Pump
$165.00 - $185.00
Frame pumps are highly underrated. IMPERO ULTIMATE features a unique 2-stage head gasket to provide ultimate sealing and holding even when compared to lever chuck designs. Machined aluminum head with brass check valve ensures a lifetime of flawless use. Full aluminum barrel, handle and piston rod result in a pump that is competitive in weight with plastic designs while being significantly stronger, smoother and more durable. Unique FlexWing Silicone bumpers on the head and handle tip are designed to accommodate tubing diameters from 1" (25mm) to 2.5" (64mm). An additional Silicone bumper on the main barrel protects paint, eliminates vibrations and noise, and also acts as a compression lock against the handle to keep it from moving until you use the pump. All IMPERO ULTIMATE frame pumps are hand assembled at the SILCA home office using Alcoa Aluminum extrusions and bar stock. All aluminum construction Italian leather 19mm diameter piston gasket Brass check valve FlexWing Technology Fits Tube size between 1" (25mm) and 2.5" (60mm) Silicone bumper for secure fit and paint protection Lever-free 2-Stage sealing advanced elastomer head Most efficient Inflation of any Portable Pump (112 strokes = 100psi size Small) Covered by SILCAShield Weights: SM: 256gm M: 267gm L: 278gm XL: 289gm
DT Swiss M 1900 SPLINE 25 29-inch Front
$184.90
Listen up all you seasoned all mountain riders out there, with your grazed calves and elbows! This wheel's for you. The lightweight M 1900 SPLINE 25 can withstand the toughest alpine trails. Its tubeless-ready rim has been tested by both professional mountain bikers on the trail and our experts in the lab. We've packed more than 20 years of expertise into the lightweight straight-pull hub to ensure that you'll be tearing up the trails for years to come with your M 1900 SPLINE wheels.
Industry Nine Torch Mountain and Fat Freehub: Shimano HG
$180.00
Industry Nine Freehub bodies are machined in North Carolina and contain all necessary pawls, springs and bearings for servicing or converting their hubs. - Kits include freehub, bearings, inner spacer, pawls, and springs - Not compatible with Torch Road or Torch Classic Road hubs SPECIFICATIONS - Material: Aluminum - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed , Shimano Dynasys 11 Speed Mountain
Ortlieb Gravel Pack Pannier - 25L, Black
$180.00
Ideal for multiday tours and self-supported races, the ORTLIEB Gravel-Pack duo offers you a combined payload of 25 liters for additional gear such as mess kits, food and other “luxury” items. Mounting the Pack to your lowrider bike rack allows you to maintain a low center of gravity and undiminished off-road agility despite your extra gear. - Waterproof pannier pair with roll closure - Lightweight, sturdy PU laminated rip stop nylon fabric - QL2.1 system for racks up to 16 mm, plus an additional mounting hook for secure fixing to rack - Including reduction pieces for tube diameters 8, 10 and 12 mm; with anti-scratch function reducing abrasions on rack SPECIFICATIONS - Carry Location: Front or Rear - Color: Black - Number of Compartments: 1 - Total Volume: 25 - Access Style: Flap - Individual or Pair: Pair - Off Bike Carrying Method: Handle - Primary Material: Nylon - Weight: 1160g - Waterproof: Yes
Paul Component Engineering Minimoto Mini-V Brake
$180.00
- Mini-v brake for use with standard short pull (road) brake levers - Direct pull cantilever brake is simpler to install than a traditional cantilever brake and gives a narrow profile - Short curved arms give plenty of clearance for cyclocross tires or wide fenders - Spring tension is independently adjustable for each arm, so the brake can be precisely centered on the wheel and adjusted for return strength - Simple pivoting quick release on one arm makes it easy to open the brake to remove a wheel - Made in USA
Petzl Tectal Fabio Edition Uranium
$180.00
Trusted POC protection with designs developed by the inimitable and inspirational Fabio Wibmer. Product Highlights - Designed to provide more coverage at temples and back of head. - Size adjustment system. - Adjustable visor. - Recco reflector. Approaching every obstacle with creativity and the inspiration to do things differently has always been the ethos POC has shared with Fabio Wibmer. Now, as he leads and reimagines what is possible on a bike, and as POC leads and innovates in the development of award-winning protection, the two have come together to develop the exclusive Fabio signature series. Everything in the series features details designed by Fabio himself. The well-ventilated Tectal is ideal for trail and enduro, and includes aramid bridges in the helmet liner for extra strength and stability. The reinforced EPS liner provides a high level of protection and the unibody shell construction further enhances the safety properties and construction integrity of the helmet while maintaining a low weight. The Tectal offers more coverage than conventional mountain bike helmets and has a highly efficient ventilation design, optimized and evaluated through wind tunnel testing. The lightweight size adjustment system ensures a comfortable and secure fit. Technical Details - Weight: XS-S: 320g, M-L: 350g, XL-XXL: 370g - Construction: EPS liner, Outer PC shell, Unibody shell - Aramid fiber grid for protection and durability
Rapha Brevet Jersey
$180.00
An evolution of Rapha's practical, comfortable and reflective long-distance jersey. The Brevet Jersey II is designed for the demands of long distance riding, with a focus on all-day comfort, reflectivity, and storage space. Made from our propriety merino blend, Rapha Performance Merino 150 combines natural wicking and antibacterial properties, and has a luxurious, soft feel against the skin. Our choice for long days on the bike, RPM150 is also quick-drying and odour resistant to help you stay fresh throughout your ride. The top chest perforated stripe and armband are reflective for increased visibility in low light. Three main rear pockets are complemented by a zipped cargo pocket – large enough to hold an extra layer – and a zipped pocket for valuables and brevet cards. The updated fit is inspired by our Classic Jersey II, to fit comfortably and close to the body while being less compressive than our racewear. - High-visibility stripes and print - Three large cargo pockets - Zipped ballast pocket for gilet - Insulating and breathable Sportwool - Zipped valuables pocket - 64% polyester - 36% merino wool
Rapha Men's Brevet Jersey
$180.00
A supremely comfortable, highly visible jersey with storage space for longer rides. - Your go-to jersey for self-reliant riding - Made with the same merino-based fabric used in our Classic collection - Features hi-vis and reflective perforated stripes on the torso and the sleeve for visibility - Three rear pockets and a secure, mesh-lined cargo pocket for a jacket or gilet - Merino blend offers efficient sweat wicking and is naturally antibacterial - Quick drying, supremely comfortable, and built to go the distance SPECIFICATIONS - Full-length lined zip - Silicone-lined hem with drawcord - New low-bulk rear pocket construction - Embroidered chest logo - Main: 64% Recycled Polyester/36% Wool - Contrast: 90% Nylon/10% Elastane - Contrast 2: 100% Polyester
Rapha Men's Trail Lightweight Jacket
$180.00
A lightweight, packable windproof jacket, designed for mountain biking in changeable conditions that attaches to your bike frame. - Made with a windproof nylon ripstop fabric that’s lightweight, breathable and durable for maximum tear resistance. - Packs up inside the chest pocket and straps to your bike frame with a storage strap included. - Adjustable hood for optimum fit. - Ergonomic fit and construction that works on and off the bike. - Ripstop fabric for abrasion resistance - Excellent mechanical stretch to maximise tear resistance - Coated with a durable water repellent (DWR) - Ergonomic pattern cut for complete freedom of movement - Zippable essentials pocket on chest - 100% Nylon Ripstop
Shimano PD-M9100 XTR Pedal
$180.00
When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9100 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9100 are the weapon of choice for WC racers worldwide. BETTER MUD CLEARANCE - Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence. ADDED EFFICIENCY + DURABILITY - Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center. BETTER MUD CLEARANCE - Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.
Swift Industries Sugarloaf Basket Bag
$180.00
The Sugarloaf Basket bag was made for the Wald 137 front bicycle basket. It’s designed to fit perfectly into the classic basket, and is kept in place with a reliable and good looking attachment design. Stylish, easy going, and purposeful to the very last seam, the Swift Sugarloaf carries as gracefully off-bike as on. With comfortable handles and shoulder strap attachment points, this bag is an ideal travel companion, wherever you choose to take it. The Sugarloaf is designed especially to nest inside the classic Wald 137 basket. Side wings wrap over the basket to hold your bag in place, so you can hit the trail knowing your bag’s going to stay in place. No need for a cargo net and no more rattling on uneven terrain! The front pocket and main compartment are still accessible while the bag is in the basket, so you can reach your things without getting off the bike. Wald baskets are easy to mount on just about any bike. Get the 137 if you have a front rack, or the 1372 if you don’t. Add capacity to your set-up with the Sidekick Pouch and Rando Pocket for your Wald Basket! Cool Features: Exterior pockets accessible while the bag is in the basket Magnetic snap pocket closures A very secure attachment system to the basket. Cushioned base to prevent rattling noises and to protect iPad Interior pockets for additional organization Reflective touches on attachment wings Clever snap on handles keeps them out of the way
MICHELIN Power Cyclocross Jet Tubular
$79.99 - $179.99
Power Cross Jet tire features small blocks on the tread pattern provide excellent tread strength and maximum speed. - Improved transmission of pedaling power for controlled grip - Specially adapted reinforcements provide safe, low-pressure riding on all terrains
MICHELIN Power Cyclocross Mud
$79.99 - $179.99
Michelin Power Cross Mud's tread pattern transmits pedaling power more effectively in mud terrain for a controlled grip. - For low-pressure cycling on rugged terrain using specially adapted cotton reinforcements - PSI: 72 - Weight: 380g
Race Face Atlas Platform Pedal
$179.99
- Low-profile, lightweight, wide aluminum body with double-concave platform. - Platform size: 101x114cm - 4 Full sealed cartridge bearings per pedal - Super thin double concave wide platform - Hex-head threaded pin design offers more bite for added security - Fore and aft angled bottom-loading pins - Hidden pin / Grease access port - 20 SHCS hex traction pins per pedal
Shutter Precision DS-4 Dynamo Headlamp
$179.99
- Compatible with Shutter Precision and other 6V Dynamo hubs - Single-mode low beam meets German StVZO regulation - Includes headlamp, stem mount, and fork mount brackets and mounting hardware SPECIFICATIONS - Lumens: 290 - Battery: dynamo hub powered - Color: black - Weight: 120g **We're known for our custom wheel builds. Call or text us to get started on building up a wheelset to power this light using dynamo hubs.
Strider Pro 12 Balance Bike
$179.99
Strider’s Pro 12 is a lightweight, pedal-less balance bike that allows your child to straddle the bike with both feet on the ground and easily propel the bike by walking or running. This nimble aluminum bike lets your little one focus on the fundamentals of balancing, leaning, and steering without the distractions and complications of pedals or training wheels. The maintenance-free ultra-light wheels feature industrial foam tires so you’ll never have to worry about a flat. The built-in footrest with grip tape allows toddlers to easily glide with their feet up. Plus, the adjustable-height seat and handlebar let the Pro 12 grow with your kiddo.
PNW Components Rainier Gen 3 Dropper Post
$179.00
In the bike industry, fashion is determined by the mud on your shorts and dust on your shoes. Yet, there is something undeniably satisfying about a freshly tailored suit, so we designed the all new Rainier Dropper Post to add that custom-tailored feel to your bike. The past version of this post is known for its consistency and reliability. While maintaining those qualities, this new iteration focuses on fitting more bikes and providing refined adjustability for the rider. - Tool-less Travel Adjust - Shortened Overall Length - Sealed air cartridge - Internal cable routing - 3-year warranty!
Page 1 of 6 Next page