Brakes/Levers/Pads

Zipp Center Lock Lockring for 140mm to 160mm

Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. - Compatible with 12mm, 15mm and 20mm thru axles and QR - Machined 7075-T6 aluminum - Durable anodized finish - Torque to 40Nm - Not compatible with 6-bolt rotors and hubs - Washer included

Tektro Disc Brake Adaptors SPECIFICATIONS - Brake Caliper Type: Flat Mount - Mount | Rotor Size: Front Flat | 140 Rotor , Front Flat | 160 Rotor

Tektro Disc Brake Adaptors SPECIFICATIONS - Brake Caliper Type: Flat Mount - Mount | Rotor Size: Rear Flat | 160 Rotor

Tektro 5.5mm Disc Brake Hose Kits. - Includes 2000mm hose, 1 hose retainer cover, 2 hose retainers, 2 compression ferrules, 2 brass inserts with O-ring - 5.5mm hose diameter

The Tektro MD-C550 is a dual-piston mechanical disc caliper designed for road bikes. - Uses QBP Disc Pad Finder #22 brake pad - The low-profile caliper design is compatible with road bikes - Dual-piston caliper provides steady braking power

Tektro disc brake rotors are crafted with corrosion resistant stainless steel. - Lightweight rotor design - High heat dispersion and heat tolerance - Includes (6) mounting bolts and T25 torque tool

The Tektro TR-35 1.8mm center lock disc brake rotor is crafted with stainless-steel to provide durability, corrosion resistance and high heat tolerance. - Stainless-steel construction offers durability, corrosion resistance, and high heat tolerance - Steel center-lock mount type - Lock-ring sold separately

TRP mounting bolt for flat mount rear calipers. - Includes 2 bolts

- Non-Integrated brake levers for urban, Singlespeed, Cross, Tri and tt use - Ergonomic aluminum lever with grippy, textured rubber hoods - Includes spring loaded push button cable tension quick release.

The Spyre is a mechanical disc brake that offers superior performance with incredibly easy setup. This is a dual-piston-actuated mechanical disc brake caliper that provides precise clamping force. This translates into even pad and rotor wear, because the rotor does not need to flex to one side during braking. We added a simple cable barrel adjuster to make fine-tuning easy. All of this in an incredibly thin 40mm, 146g package that works with any drop bar levers on the market. Rotors and adapters are sold separately. For tandem bikes, we recommend the Spyre caliper paired with our 2.3mm thick rotors. This will give optimum stopping performance for you and your partner. SPECIFICATIONS - Weight: 154g per caliper - Dual-sided actuation - Works with ALL cable-actuated road levers. Compressionless (linear strand) housing is highly recommended - Comes with TRP ultra-grippy semi-metallic pads - Calipers are compatible with Shimano M525/M515 pads - 160mm rotors recommended on front wheel - Rotors, adapters, and flat mount mounting bolts sold separately - All flat mount calipers being mounted to the fork require the FF-5 Front Flat Mount 140/160mm adapter - Sold as a caliper only

The Spyre SLC is a mechanical disc brake that offers superior performance with incredibly easy setup. This is a dual-piston-actuated mechanical disc brake caliper that provides precise clamping force. This translates into even pad and rotor wear, because the rotor does not need to flex to one side during braking. We added a simple cable barrel adjuster to make fine tuning easy. All of this in an incredibly thin 40mm, 146g package that works with any drop bar levers on the market. Rotors and adapters are sold separately. For tandem bikes, we recommend the Spyre caliper paired with our 2.3mm thick rotors. This will give optimum stopping performance for you and your partner. SPECIFICATIONS - Weight: 146g per caliper - Carbon actuation arm for maximum rigidity, and weight savings - Dual-piston actuation - Works with ALL cable actuated road levers. Compressionless (linear strand) housing is highly recommended - TRP ultra-grippy semi-metallic pads. These are compatible with Shimano M525/M515 pads - Rotors, adapters, and flat mount mounting bolts sold separately - All flat mount calipers being mounted to the fork require the FF-5 Front Flat Mount 140/160mm adapter - Sold as a caliper only

TRP’s two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Two-piece is now combined with TRP’s new slotted rotor is design. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking. When debris gets trapped between the pad and rotor braking power is dramatically reduced, these recessed slots maintain a more consistent brake feeling in mixed conditions. - Sizes: 140mm, 160mm, 180mm, and 203mm - Six slots to remove water, mud, and debris - Two-piece design for heat management and stiffness

High performance Kevlar, Ceramic, Brass and resin composite material. Provides excellent brake power with minimal effort at the brake lever. Performance is consistent in both wet and dry conditions and pad life is excellent. High quality springs included with every set (where applicable). Fits: Magura - MT 2,4,6,8 Campagnolo - Road Disc

High performance compound for carbon wheels. Excellent stopping power wet and dry with superior modulation and low pad wear rates. Fits: - Campagnolo 10|11|12 speed DOES NOT FIT - Campagnolo Potenza 2016 - Campagnolo Athena 2016 - Campagnolo Veloce 2016 - Campagnolo Centaur 2017

We changed the iron outer cable coil to a stainless steel one. It makes more difficult to rust and finished in clear coating. It includes polyethylene inner liner and it makes the pull of brake lever much lighter. The outer diameter is 5mm and you can use 1.5mm or 1.6mm inner wire. Because of the increase of disk brake bicycles, a diversification of cable handling, and the usage of full outer cable, we provide you a total length of 3m (a regular length is 2m mostly), so there should be no necessity of extra length for your bike. Length: 3m

Shimano Altus hydraulic disc brake and lever sets feature an entry-level design that's ideal for beginner riders and riders with smaller hands. - The brake lever's versatile design matches numerous bike styles - Braking power is adjusted for entry-level riders - Pre-bled brakes for easy, quick, and clean installation

- MTB SM-BH90 with short silver banjo fitting - 2000MM - Includes connecting unit - Does not include banjo bolt

Shimano D03S-RX Disc Brake Pads Specifications: - Provides 50% more wear resistance than previous model (D03S) - Compatible with Shimano Models:BR-M8120, BR-M7120, BR-M6120, BR-M8020, BR-M820, BR-M810, BR-M640, BR-MT520, BR-MT420 - Consistently smooth and quiet braking power - Designed for dry and wet conditions - Heat Sink: No - Pad Shape Number: 50 - Backing Plate Material: Steel - Compound: Resin

The Shimano Deore M6100 disc brake and lever offers reliable power and a rigid brake design for MTB riding. - Brakes are pre-bled - Includes resin brake pads - Features the BR-M6100 2-piston disc brake caliper

Shimano's SM-RT64 disc brake rotors deliver powerful and consistent braking performance in all riding conditions. SHimano's Center Lock mounting system makes installing and removing disc brake rotors quick and easy thanks to the spline mount and lock ring design. - Compatible with both resin and metal pads - Includes external type rotor lockring

Shimano G04S metal disc brake pads. - Fits XTR BR-M9000, BR-M9020, BR-M985, XT BR-M8000, BR-M785, SLX BR-M666, Alfine BR-S700 and BR-R785, BR-RS785 road disc calipers - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability - Ventilated steel backing plate for improved heat dispersion - Backing Plate Material: Steel - Compound: Metal

Shimano Deore XT RT-MT800 Center Lock disc brake rotors feature an advanced heat-dissipating design. - Rotor construction uses Shimano Freeza technology to boost heat dissipation and reduce fade - Quick and easy installation with spline mount and lock ring (included) - Compatible with metal and resin pads

Shimano Deore XT SM-RT86 6-Bolt Disc Rotors feature ICE cooling technology and a mud shredding rotor blade design to keep the rotor cooler and cleaner. - ICE technology features a 3-layer structure with an aluminum core and two stainless steel outer layers to reduce rotor surface temperature by approximately 100 degrees Celsius compared to all-steel rotors - Lightweight, heat-resistant design for less fade, less noise, and longer pad life - Mud shedding rotor blade design helps to keep the rotor cleaner - Includes rotor fixing bolts and non-turn washers

Rotor for disc brake, SM-RT86, 160MM, 6-bolt

Disc Brake Assembled Set/J-Kit Direct, GRX, ST-RX825 (L), BR-RX820 (F), For 160MM Rotor, Resin Pad (With Fin), With Connector Insert, 1000MM (SM-BH90 Black) Specifications: - Caliper material: Aluminum - Hydraulic - Included brake pad: L05A Resin

Shimano Disc Rotor Parts

Shimano Disc Brake Adaptors allow the use of different sized rotors to your frame or fork. - For 74mm caliper on 51mm fork, using 160mm rotor - Includes mounting hardware - Brake Caliper Type: Post Mount - Weight: 20 - Mount | Rotor Size: Front IS | 160 Rotor

Shimano Disc Brake Adaptors - For use with 180mm post mount and 203mm disc rotor

Shimano mounting bolts for flat-mount disc brake calipers. - Bolts sold individually - Bolt length: 23mm - Chainstay thickness: 10mm - Attaches rear mounting plate to frame - Required bolt is determined by chainstay thickness, not actual bolt length