Brakes/Levers/Pads

The Love Lever 2.5 is a lightweight long-pull brake lever designed for three-finger operation and easy adjustment. - 6061 Aluminum - Simple, light, durable, comfortable, handsome! - Matches well with our Motolite and Klamper brakes (but work well with any v-brake, mech. disc brake, or other long pull brakes) - New geometry with more power and better ergonomics - Lever blade is about 20mm longer than the Compact model - Enlarged perch clamp screw and the Paul’s Hollow Lite pivot pin - Anodized Silver or Black - 137g (if you are looking for a lever to use with Neo-Retro, Touring Canti, or Racer brakes - pls see the Canti Lever by Paul)

This +20mm Rear Flat Mount Adapter is for running 160mm rotors on a 140mm frame. It could also work for putting a 140 rotor on a 120 frame, or a 180 rotor on a 160 frame, you get the idea. We don’t normally care that much about being ultra-light, but we did machine out a little hollow section, so this adapter only weighs 9 grams, so that’s cool. This kit comes with the screws that hold the brake to the adapter, but you’ll still need to find the right length screws to mount the adapter to the frame. Since those can vary quite a bit in length depending on the frame, those are sold separately. Technical Information: - Material: 6061 American Aluminum - Weight: 9 grams - Torque Spec: 5.5nm - Finish: Anodized or Polished - Color: High Polish - Mount: Flat Mount Rear

Stubby lever for fixed gear bikes - 23.8mm clamp - Fits on the narrower grip section of road handlebars - 56g Please note: Because of its compact design the E-Lever has less leverage than Paul's other brake levers. For this reason we cannot recommend it for use as the sole method of braking. The E-Lever should only be used in conjunction with other brake mechanisms such as a fixed gear hub or coaster brake. For a similar brake lever with greater leverage, take a look at the Cross Lever.

The Neo-Retro is a wide-profile cantilever brake with a design based on the geometry of the famous Mafac Tandem brake. Where the Neo-Retro differs from its classic heritage is in its modern materials and adjustability. - Compatible with drop bar levers and short pull mountain bike levers - Modeled after the popular Mafac Tandem cantilever - Sealed pivot system with adjustable spring tension and Kool Stop pads - Recommended for standard pull (not linear pull) brake levers - Made in USA

- Works well as a rear brake where the Neo-Retro may cause heel clearance problems - Compatible with drop bar levers and short pull mountain bike levers - Sealed pivot system with adjustable spring tension and Kool Stop pads - Recommended for standard pull (not linear pull) brake levers - Made in USA

The Cross Lever is an inline brake lever designed for use on the flat upper section of drop handlebars. It can be used with short-pull or long-pull brakes and road bars. - 6061 Aluminum - Fully CNC’d construction gives them a solid feel in the hand - Hinged clamp allows for installation without needing to strip your bar tape - Adjustable pivot pin position (for short-pull or long-pull brakes) - Barrel adjuster makes it easy to fine tune your cable tension - Anodized Silver or Black - 140g

The Canti Lever is a short pull brake lever for use with short pull brakes like cantilevers, center pull brakes, and side pull caliper brakes. - 2 sealed cartridge bearing pivots - Adjustable reach - Oversized barrel adjusters for easy cable adjustment even with thick gloves on - Compatible with Paul Klamper (short-pull), cantilever center pull, and other short-pull brakes - Machined in the USA of 6061 Aluminum - 22.2mm clamp band - Color: Silver - Brake Lever Use: Pair - Brake Lever Actuation: Short Pull

A short-pull brake lever for use with short pull brakes: cantilever, caliper, U-brakes, or Roller Cam. - 6061 Aluminum - Perfect with Neo-Retro, Touring Canti, and Racer brakes - Super comfortable grip, and an excellent feel - Reach adjustment screw - An unstrippable clamp screw and the Paul’s Hollow Lite pivot pin - 137g (if you are looking for a lever to use with the Motolite or Klamper disc brakes, pls see the Love Lever by Paul)

The Love Lever Compact is a lightweight long-pull brake lever designed for two-finger operation and easy adjustment. - 6061 Aluminum - Simple, light, durable, comfortable, handsome! - Perfect with Motolite or Klamper brakes (but work well with any v-brake, mech. disc brake, or other long pull brakes) - New geometry with more power and better ergonomics - Lever blade is about 20mm shorter than the 2.5 model - Enlarged perch clamp screw and the Paul’s Hollow Lite pivot pin - 125g (if you are looking for a lever to use with Neo-Retro, Touring Canti, or Racer brakes - pls see the Canti Lever by Paul)

LOVE LEVER The Love Lever is a lightweight long-pull brake lever designed for two-finger or three-finger operation and easy adjustment. The design balances comfort and weight without feeling flimsy in your hand. The Compact fits two fingers and the 2.5 fits three. The Love Lever Compact has a lever blade that is about 20mm shorter than the 2.5 model. TECHNICAL INFORMATION Material - 6061 Aluminum Weight - Compact: 125g 2.5: 137g Finish - Anodized or Polished Anodized Color - Black, Purple or Silver Cable Pull - Long Pull Clamp Size - 22.2mm

- Mini-v brake for use with standard short pull (road) brake levers - Direct pull cantilever brake is simpler to install than a traditional cantilever brake and gives a narrow profile - Short curved arms give plenty of clearance for cyclocross tires or wide fenders - Spring tension is independently adjustable for each arm, so the brake can be precisely centered on the wheel and adjusted for return strength - Simple pivoting quick release on one arm makes it easy to open the brake to remove a wheel - Made in USA

- Awesome power - Design accomodates fenders & wider tires - Adjustabe for 27” and 700c wheels - Center or caliper boss mount (braze-on)

- Reversible 6061 aluminum arms for left or right cable routing - Quick-release noodle is lined with Teflon for smooth action - High tension square wire springs - Thinline threaded pads with easy-to-adjust arm hardware - Made in USA

Klamper Disc Brake Caliper - Actuator Arms can be swapped out between long pull, short pull, and Campagnolo pull - Machined in the USA of 6061 aluminum - Three hardened steel pins to locate the pad actuator - Flat needle roller thrust bearing for smooth action - Tried and true ball bearing in a ramp system SPECIFICATIONS - Rotor Included: No - Color: Silver - Brake Lever Actuation: Long Pull - Brake Caliper Type: Post Mount - Defined Color: Silver - Weight: 211g

We think this is the best mechanical disc brake on the market, machined by us here in Chico, California. Flat-Mount Klampers are available in Short-Pull (SRAM/Shimano) or Campagnolo Pull. TECHNICAL INFORMATION Compatibility: All Flat-Mount Bicycles Material: 6061 Aluminum, Heat Treated 12L14 Steel Weight: 211g Brake Pads: Kool Stop Disc Brake Pads

A mechanical, cable operated disc brake caliper from Paul Components! Why mechanical? Some prefer the simplicity of cables versus bleeding hydraulics, and the reliability needed in extreme back country situations. - Meaty stiff calipers give a good response and great feel - Extra-large three ball system running on hardened steel actuators for more smoothness and less wear - Needle bearing thrust washer reduces friction - Sold as caliper only (rotor & adapter must be purchased separately) TECHNICAL INFORMATION: Compatibility: IS/Post Mount Cable pull: Long-Pull for SRAM/Shimano Mtn Material: 6061 Aluminum, Heat Treated 12L14 Steel Weight: 211g Brake Pads: Kool Stop Sintered

A mechanical, cable operated disc brake caliper from Paul Components! Why mechanical? Some prefer the simplicity of cables versus bleeding hydraulics, and the reliability needed in extreme back country situations. - Meaty stiff calipers give a good response and great feel - Extra-large three ball system running on hardened steel actuators for more smoothness and less wear - Needle bearing thrust washer reduces friction - Sold as caliper only (rotor & adapter must be purchased separately) TECHNICAL INFORMATION: Compatibility: IS/Post Mount Cable pull: Short-Pull for SRAM/Shimano Road Material: 6061 Aluminum, Heat Treated 12L14 Steel Weight: 211g Brake Pads: Kool Stop Sintered

Three years of development and we think we nailed it. 100% designed, tested and manufactured in-house. - Cable pull: long pull - Finish: all black TECHNICAL INFORMATION - Material: 6061 Aluminum, Heat Treated 12L14 Steel - Weight: 211g - Brake Pads: Kool Stop Avid Elixer SRAM MTB XX Sintered Metal Compound #KS-D296S

Klamper Disc Brake Caliper - Actuator arms can be swapped out between long pull, short pull, and Campagnolo pull - Machined in the USA of 6061 aluminum - Three hardened steel pins to locate the pad actuator - Flat needle roller thrust bearing for smooth action - Tried and true ball bearing in a ramp system SPECIFICATIONS - Rotor Included: No - Color: Black - Brake Lever Actuation: Short Pull - Brake Caliper Type: Post Mount - Defined Color: Black - Weight: 211g

Klamper Disc Brake Caliper - Actuator Arms can be swapped out between long pull, short pull, and Campagnolo pull - Machined in the USA of 6061 aluminum - Three hardened steel pins to locate the pad actuator - Flat needle roller thrust bearing for smooth action - Tried and true ball bearing in a ramp system Specifications - Rotor Included: No - Color: Silver - Brake Lever Actuation: Short Pull - Brake Caliper Type: Post Mount - Defined Color: Silver - Weight: 211