Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Chainrings

Wolf Tooth Components 104 BCD Stainless Steel Chainrings
$119.95
416 stainless steel is not the first material choice for most component manufactures looking to use stainless steel (most use soft 300 series). That is because 416 is hard...hard because the raw billet is expensive, hard because it takes a long time to machine. However, that did not stop Wolf Tooth because there is no denying that it is the best material for those that need the ultimate durability in a chainring. These stainless steel chainrings are not only beautiful, but they will last 5-10 times longer than their aluminum versions. Compatibility: - These are functionally the same as the aluminum 104 BCD rings. - These rings fit any 104 BCD crankset. - 30t x 104 ring is the only Quarq power meter compatible 30t ring available. - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention). - Provide a great chainline on most boost bikes
Wolf Tooth Components CAMO Stainless Chainrings
$119.95
CAMO is all about choice - these stainless rings are made from 416 Stainless Steel for durability, strength and performance. Useable only with CAMO spiders. - Requires the use of a CAMO spider - Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Hardened and electropolished 416 stainless steel is lasts 5x-10x longer than aluminum
Wolf Tooth Components Elliptical 110 BCD Asymmetric 4-Bolt Chainring for Shimano Cranks
$91.95
Designed to fit 4-arm 110 Asymmetric BCD Shimano Road Cranksets. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. These rings feature the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. - The simplest way to explain the way these rings feel is having 2 teeth less in the weak part of your pedal stroke and 2 teeth more where you have the most power - Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075-T6 aluminum for long life - Use of a clutch-style rear derailleur is recommended
Wolf Tooth Components Elliptical 110 BCD Asymmetric 4-Bolt Chainring for Shimano GRX Cranks
$81.95 - $91.95
Designed to fit Shimano GRX 4-bolt 110 Asymmetric BCD cranksets. The design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the benefits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. These rings feature Wolf Tooth's Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. - Compatible with Shimano GRX cranksets including RX600 and RX810 - The Powertrac elliptical design means the diameter is that of a chainring 2t bigger - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Use of a clutch-style rear derailleur is recommended - Made from 7075-T6 aluminum for long life
Wolf Tooth Components Cannondale Direct Mount CX Ring
$90.20
- Road/Cross/Gravel offset ring has a reverse dish for perfect chainline - Fits Cannondale Hollowgram SI & SISL cranksets, replacing ring and spider - 48mm chainline, same as Cannondale XX1 spider. Use 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Features Drop-Stop tooth design to prevent unwanted chain drop - Made in the USA from 7075-T6 aluminum alloy - 64g/68g/72g (30/32/34t)
Wolf Tooth Components 110 BCD Asymmetric 4-Bolt Chainring for Shimano Cranks
$89.95
The Wolf Tooth 110 BCD Asymmetric Chainrings are designed for use with Shimano GRX cranks. Chainrings feature Wolf Tooth's patented Drop-Stop design for the best wear life, chain retention, and mud clearance. - Compatible with Shimano GRX cranksets including RX600 and RX810 - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Drop-Stop FT is compatible with all 10-, 11-, and 12-speed chains (including SRAM Flattop 12-speed chains), with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Use of a clutch-style rear derailleur is recommended - Made from 7075-T6 aluminum for long life
Wolf Tooth Components 110 BCD Asymmetric 4-Bolt for Shimano Cranks
$84.95 - $89.95
Wolf Tooth was first to market with Cyclocross 1x specific chainrings because we saw Cyclocross as the perfect use for our patent pending Drop-Stop technology. These beautifully machined 110 BCD Asymmetric 4-bolt chainrings are optimized for your 1x Shimano CX/ Road/ Gravel drivetrain whether you run Dura Ace 9000, Ultegra 6800, 105 5800, or Tiagra 4700. They are also offset for the ideal 1x chainline. Compatibility: - These rings are for use with 110 BCD Asymmetric 4-bolt cranks. - Compatible with Dura Ace 9000, Ultegra 6800, 105 5800, Tiagra 4703, and Tiagra 4700 - Sizes 38T and larger are compatible with Dura Ace 9100, Ultegra 8000 and 105 R7000 but a slight modification is required due to a change in the crank arm profile. The 36T chainring will not work for this modification. - Mounts in the big ring position of the cranks but is offset inward for perfect chainline. - The stock 2x bolts will not work. You will need 6mm bolts which are optimized for single ring mounting. - For 1x9, 1x10, 1x11 and 1x12 drivetrains including SRAM Eagle (TM) - Compatible with all 10, 11, and 12 speed chains including SRAM Eagle (TM) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).
Wolf Tooth Components 110 BCD Gravel/CX/Road Chainring
$79.95 - $89.95
The perfect 1x solution for your gravel, CX or road bike. Made from 7075 Aluminum, Wolf Tooth's patented Drop-Stop design helps clear mud while retaining your chain. - Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Drop-Stop FT is compatible with all 10-, 11-, and 12-speed chains (including SRAM Flattop 12-speed chains), with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Not compatible with Shimano Asymmetric 110 BCD cranks or Campagnolo CX10/11 cranks - Use of a clutch-style rear derailleur is recommended - Made from 7075-T6 aluminum for long life
Wolf Tooth Components 130 BCD Gravel/CX/Road Chainring
$79.95 - $89.95
The perfect 1x solution for your gravel, CX or road bike. Made from 7075 Aluminum, Wolf Tooth's patented Drop-Stop design helps clear mud while retaining your chain. - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Drop-Stop FT is compatible with all 10-, 11-, and 12-speed chains (including SRAM Flattop 12-speed chains), with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Not compatible with Shimano Asymmetric 110 BCD Cranks or Campagnolo CX10/11 cranks - Made from 7075-T6 aluminum for long life - Use of a clutch-style rear derailleur is recommended
Wolf Tooth Components SRAM 8-Bolt Direct Mount Chainring
$84.95 - $89.95
Direct mount rings designed for SRAM cranks with 8-bolt mounting. This chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Compatible with SRAM AXS cranksets and other cranks that use the 8-bolt mounting - Made from 7075-T6 aluminum for long life - 6mm offset - 45mm chainline - Use of a clutch-style rear derailleur is recommended - Use the same 8 bolts that were on the crankset to attach the Wolf Tooth ring
Wolf Tooth Components Elliptical RaceFace/Easton CINCH Direct Mount Road Chainring
$87.95
Designed for Easton CINCH cranks with removable spiders. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. - Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Drop-Stop FT is compatible with all 10-, 11-, and 12-speed chains (including SRAM Flattop 12-speed chains), with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075-T6 aluminum for long life - Use of a clutch-style rear derailleur is recommended - 3mm offset provides optimal chainline (47mm) for CX and Road
Wolf Tooth Components PowerTrac Elliptical Direct Mount Chainrings for SRAM Cranks
$84.95 - $87.95
Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. - Elliptical rings provide smoother, more efficient pedal rotation, which means better traction - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Not compatible with the SRAM RED and Force AXS 8-bolt interface - Made from 7075-T6 aluminum for long life - Use of a clutch-style rear derailleur is recommended - Compatible with 12-speed SRAM Flattop chain
Wolf Tooth Components Elliptical Direct Mount Chainring for Shimano Cranks
$86.95
This chainring's tooth profile was developed specifically for Shimano's XTR 12-speed Hyperglide+ chain. - Compatible only with Hyperglide+ 12-speed chains - For use with Shimano XTR M9100 series cranksets - Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention - Prevents premature ring and chain wear that can come from non-optimized profiles
Wolf Tooth Components Hyperglide+ Elliptical Direct Mount Chainring for RaceFace/Easton Cinch
$86.95
This chainring's tooth profile was developed specifically for Shimano's XTR 12-speed Hyperglide+ chain. - Elliptical rings provide smoother, more efficient pedal rotation, which means better traction - Compatible only with Hyperglide+ 12-speed chains - For use with any RaceFace CINCH crankset - Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention - Prevents premature ring and chain wear that can come from non-optimized profiles
Wolf Tooth Components Hyperglide+ Elliptical Direct Mount Chainring for Shimano Cranks
$86.95
This chainring's tooth profile was developed specifically for Shimano's XTR 12-speed Hyperglide+ chain. - Compatible only with Hyperglide+ 12-speed chains - For use with Shimano XTR M9100 series cranksets - Maintains quiet and smooth performance of the Hyperglide+ drivetrain with exceptional chain retention - Prevents premature ring and chain wear that can come from non-optimized profiles
Wolf Tooth Components 110 BCD Asymmetric 4-Bolt Chainring for Shimano GRX Cranks
$79.95 - $84.95
The Wolf Tooth 110 BCD Asymmetric Chainrings are designed for use with Shimano GRX cranks. Chainrings feature Wolf Tooth's patented Drop-Stop design for the best wear life, chain retention, and mud clearance. - Compatible with Shimano GRX cranksets including RX600 and RX810 - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Drop-Stop FT is compatible with all 10-, 11-, and 12-speed chains (including SRAM Flattop 12-speed chains), with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Use of a clutch-style rear derailleur is recommended - Made from 7075-T6 aluminum for long life
Wolf Tooth Components 120 BCD Chainrings
$84.95
120 BCD cranksets were introduced with SRAM 2x10 drivetrains and are excellent candidates for a 1x conversion with our patented Drop-Stop chainrings. These rings will allow you to convert your 120 BCD crankset, like the SRAM XX and others, to a 1x application! Compatibility: - These rings fit any 120 BCD crankset or spider. - For SRAM cranksets you must use the stock M8.5 bolts. These are not standard bolts and Wolf Tooth's bolts will not work with this chainring. Note that only about 3 threads will engage (same with the stock SRAM rings) - For the 36t chainring and non-SRAM cranksets you will need the M8.5 bolts from Wickwerks if your crankset doesn't already have them. These bolts actually have more threads engaged and will work better than the SRAM ones. - 36t is the smallest number of teeth that fits on a 120 BCD - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).
Wolf Tooth Components Direct Mount Chainring for RaceFace/Easton Cinch
$76.95 - $84.95
Designed for Race Face CINCH cranks with removable spiders. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Drop-Stop FT is compatible with all 10-, 11-, and 12-speed chains (including SRAM Flattop 12-speed chains), with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075-T6 aluminum for long life - Use of a clutch-style rear derailleur is recommended
Wolf Tooth Components Direct Mount Chainring for SRAM Cranks
$76.95 - $84.95
Direct mount rings designed for SRAM cranks with removable spiders. This chainring is equipped with the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Not compatible with the SRAM RED and Force AXS 8-bolt interface - Made from 7075-T6 aluminum for long life - Use of a clutch-style rear derailleur is recommended
Wolf Tooth Components Elliptical Direct Mount Chainring for Shimano Boost Cranks
$84.95
Wolf Tooth elliptical chainrings designed for Shimano direct mount cranksets. This chainring features the patented Drop-Stop® design for the best wear life, chain retention and mud clearance. - Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque - Designed for use with Shimano MTB cranksets such as XTR M9100, XT M8100, and SLX M7100 - Drop-Stop A chainrings are designed for use with all 9, 10, and 11-speed chains or 12-speed SRAM Eagle, KMC, Connex or Wippermann chains - Not compatible with 12-speed Shimano Hyperglide+, SRAM Flattop, or 12-Speed Campagnolo chains - Made from 7075-T6 aluminum for long life - 3mm offset is designed for boost cranksets (52mm chainline)
Wolf Tooth Components Elliptical 96 mm BCD Chainrings for Shimano XT M8000 & SLX M7000
$81.95
Designed to fit 4-arm 96 Asymmetric BCD XT M8000 Cranks. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. - The simplest way to explain the way these rings feel is having 2 teeth less in the weak part of your pedal stroke and 2 teeth more where you have the most power - Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075 Aluminum for long life - Use of a clutch-style rear derailleur is recommended
Wolf Tooth Components Elliptical 96mm BCD Chainrings for Shimano XT M8000 and SLX M7000
$81.95
More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth PowerTrac Elliptical (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112 degree) than competitors versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability. Compatibility - These rings fit on the Shimano XT M8000, SLX M7000, Deore M6000, or FC MT5100 1x or 2x cranksets. - Use only the stock Shimano XT M8000 or SLX M7000 chainring bolts - These CAN be mounted to the XTR 9000 series cranks, but you will have to use the bolt caps that come with that crankset and you will need to file roughly 1mm off the threaded boss on each bolt cap (they are a little too long and don't allow the ring to be tightened down). - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). - Provide a great chainline on most boost bikes - Must use the stock chainring bolts. The Wolf Tooth chainring bolts are a different size. - Ovality of 10% and timing of 112 degree after TDC (top dead center) - Maximum diameter is that of a chainring 2t bigger than the size you order so be sure there is adequate chainstay clearance. Specifications: - Chainline: 49mm - Boost Crankset Chainline: 52mm - Mount type: 96 BCD for Shimano M8000 and M7000 - Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains
Wolf Tooth Components Elliptical Direct Mount Boost Chainrings for SRAM Cranks
$81.95
The direct mount chainrings for SRAM cranksets replace your existing spider and chainring with one clean-looking, lightweight, and stiff piece of machined billet. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability. More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth PowerTrac Elliptical (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112 degree) than competitors versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability. Compatibility These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8-bolt mounting interface that is not compatible with these chainrings. Specifications: - Boost: 3mm offset for 52mm chainline - Mount type: Direct Mount for SRAM - Offset: Boost - Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains
Wolf Tooth Components Elliptical Direct Mount Chainring for Race Face Cinch
$69.95 - $81.95
Designed for Race Face CINCH cranks with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. - Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075-T6 aluminum for long life - Use of a clutch-style rear derailleur is recommended - 52mm chainline / 3mm offset for boost spacing
Wolf Tooth Components Elliptical Direct Mount Chainrings for Race Face Cinch
$81.95
More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth PowerTrac Elliptical (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112 degree) than competitors versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability. Compatibility: - Any Race Face Cinch system crankset (including Next SL, Sixc, Turbine, Aeffect) - Both standard (142mm rear hub spacing) and Boost (148mm hub spacing) offsets available. - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). - Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!) - Chainline 49mm (standard), 52mm (Boost) Specifications: - Mount type: Direct Mount for Race Face Cinch - Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains
Wolf Tooth Components Elliptical Direct Mount Chainrings for Race Face/Easton Cinch
$69.95 - $81.95
Designed for Race Face CINCH cranks with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention. - Elliptical chainring shape provides better efficiency in the recovery zone, as well as increased traction thanks to consistent torque - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Made from 7075-T6 aluminum for long life - Use of a clutch-style rear derailleur is recommended - 52mm chainline / 3mm offset for boost spacing
Wolf Tooth Components Elliptical Direct Mount Chainrings for SRAM Cranks
$76.95 - $81.95
The direct mount chainrings for SRAM cranksets replace your existing spider and chainring with one clean-looking, lightweight, and stiff piece of machined billet. More power? Check. Better traction? Definitely. Less shifting? Yup. Funky uneven pedal stroke? Not with Wolf Tooth PowerTrac Elliptical (PTE) chainrings. Our proprietary design means a slightly less ovalized ring (10%) with less aggressive timing (112 degree) than competitors versions; any change to your pedal stroke is unnoticeable for most riders, but they still provide the POWER and TRACTION benefits inherent to oval chainrings. Wolf Tooth patented Drop-Stop wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability. Compatibility - These direct mount chainrings will replace your existing chainring and spider or replace the direct mount ring on SRAM cranksets including the DUB cranks. The ring is attached via 3 bolts on the back side of the spider near the spindle. Note that the SRAM 12spd Red and Force AXS use a different 8-bolt mounting interface that is not compatible with these chainrings. Specifications: - Mount type: Direct Mount for SRAM - Chain Compatibility: Drop-Stop A tooth profile for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains
Wolf Tooth Components Elliptical Shimano 110 Asymmetric BCD Chainrings
$81.95
Designed to fit 4-arm 110 Asymmetric BCD Shimano Road Cranksets. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. These rings feature the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention. The simplest way to explain the way these rings feel is having 2 teeth less in the weak part of your pedal stroke and 2 teeth more where you have the most power Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention Made from 7075-T6 aluminum for long life Use of a clutch-style rear derailleur is recommended May require modification if used with Shimano Dura Ace 9100 or Ultegra 8000 cranksets
Wolf Tooth Components PowerTrac Elliptical Direct Mount Chainring for Easton Cinch
$81.95
Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the benefits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. - Elliptical rings provide smoother, more efficient pedal rotation, which means better traction - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Not compatible with the SRAM RED and Force AXS 8-bolt interface - Made from 7075-T6 aluminum for long life - Use of a clutch-style rear derailleur is recommended - 3mm offset is designed for boost cranksets (52mm chainline)
Wolf Tooth Components PowerTrac Elliptical Direct Mount Chainring for SRAM Boost Cranks
$81.95
Designed to fit SRAM cranksets with removable spiders. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the benefits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. - Elliptical rings provide smoother, more efficient pedal rotation, which means better traction - Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains - Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains - Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings - If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention - Not compatible with the SRAM RED and Force AXS 8-bolt interface - Made from 7075-T6 aluminum for long life - Use of a clutch-style rear derailleur is recommended - 3mm offset is designed for boost cranksets (52mm chainline)
Page 1 of 3 Next page