Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Chainrings

$24.00
SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped for precision shifting, too.
$74.00
Replacement PowerGlide rings for 11 speed crankset. - Compatible with Asymmetrical Yaw front derailleurs - Bolt Circle Diameter (BCD): 110 BCD - Material: Aluminum
$107.00
SRAM's Red road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped and pinned for precision shifting, too.
$881.00 - $1,452.00
- AXS enabled for easy monitoring and firmware upgrades - Fully integrated power meter into a direct mount chainring - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - 8-bolt direct mount compatibility only to RED and Force eTap AXS cranks. - Speeds: 12 - Chainring material: Aluminum - Power Meter Type: ANT USB
$24.00 - $150.00
Shimano Ultegra 6800 11-Speed Inner Chainrings - Material: Aluminum - Ring Position/Type: Inner
$105.00
- 11s chainring for 2011-2014 Super Record, Record, Chorus and Comp Ultra - Threaded inner ring
$128.00
Designed for use with SRAM's XX SL Eagle power meter, these Thread Mount replacement rings are purpose made for use with the XX SL proprietary spider design. This chainring mount system allows reduced weight without compromising reliability. - Proprietary Thread-Mount design specifically for use with XX SL Power Meter spiders - Light weight and incredibly durable aluminum chainring - Compatible with SRAM T-Type chains - SRAM Threaded chainring tool required for installation (Sold separately - TL0190)
$73.66 - $142.84
Gates Carbon Drive CDX Front belt drive rings are crafted with 6061 aluminum and work well for high-mileage touring or rugged off-roading. - Constructed of 6061 aluminum - 11mm pitch - CDX CenterTrack belts, cogs and rings do not interchange with any part of a CDC/CDX MudPort system
$134.59 - $159.61
Gates Carbon Drive CDX Front Sprockets for Bosch GEN2 are crafted from stainless steel and are the best choice for high-mileage touring or rugged off-roading. - Bosch GEN2 fitment - Stainless steel construction - 11mm pitch - Includes shim kit
$74.00
Rugged durability comes naturally to the X0 Eagle T-Type direct mount chainring. Finished with a distinct, dual-spoke design your shifting will never be compromised. - 3mm offset - Light weight and incredibly durable aluminum chainring - 8-bolt direct mount design (Mounting bolts included) - Compatible with SRAM T-Type chains
$107.00
Rugged durability comes naturally to the XX Eagle T-Type direct mount chainring. Finished with a distinct, dual-spoke design your shifting will never be compromised. - 3mm offset - Light weight and incredibly durable aluminum chainring - 8-bolt direct mount design (Mounting bolts included) - Compatible with SRAM T-Type chains
$128.00
Rugged durability comes naturally to the XX SL Eagle T-Type direct mount chainring. Finished with a distinct, dual-spoke design your shifting will never be compromised. - Light weight and incredibly durable aluminum chainring - 8-bolt direct mount design (Mounting bolts included) - Compatible with SRAM T-Type chains
$84.95
Wolf Tooth Direct Mount Chainrings for Trek TQ E-Bike Motors are compatible with all Boost and Super Boost bikes that use the Trek TQ Motor. This brings a lightweight chainring with patented Drop-Stop® technology to e-bike chainrings for the first time. Direct Mount Chainrings for Trek TQ E-Bike Motors are machined with 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. Compatibility: - Chainring is compatible with only TQ Motor drive systems - 55 mm chainline - Available in two different tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop B for all 9, 10, and 11spd chains or 12spd SRAM Eagle, SRAM Flattop Road or Transmission (T-Type), KMC, Connex or Wippermann chains. DROP-STOP B - Compatible 9, 10, 11, and 12s SRAM Eagle, 12s SRAM Transmission (T-type) Flattop, 12s Campy, 12s KMC - Not compatible with 12s Shimano HG+ chains DROP-STOP ST - Compatible with 12s Shimano Hyperglide+ chain and 12s KMC chain only - Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain Tech Specs: - Weights: 30t/64g | 32t/69g - Material: 7075-T6 aluminum - Made in the USA
$19.00
- Precision machined and weight relieved CNC 7075 aluminum with ramps and stainless pins - Specifically designed for 10sp system Shimano and SRAM (D-10) systems
$59.95
Upgrade your e-bike drivetrain with our Bosch e*spec Direct Mount Chainrings. Our M3 narrow-wide tooth profile reduces weight without compromising on chain retention. While the steel version is a direct OEM replacement, the premium aluminum versions provide cleaner aesthetics, lighter weight, and long-lasting performance perfect for when you're ready to upgrade from your original ring. Conquer your e-bike trails at a great price—power up your drivetrain now! - Direct Mount chainring for Bosch and Shimano E-Bike fitment - Updated M3 narrow-wide tooth profile eliminates chain noise and decreases overall system wear while retaining chain - 11/12 speed. Compatible with both Shimano and SRAM 12 speed drivetrains
$69.95 - $94.95
Proven cross-compatibility applied to an ultra-lightweight, durable AL-7075-T6 chainring. Highly CNC'd technical finish. Available to match Helix cassette colors, SRAM™ compatible 3-bolt design. A technology first. Combine with the chain, derailleur/shifter of choice without a change in chain retention quality. Build a dream rig with more freedom and spec creatively. Available in bold colors to match the popular e*thirteen Helix R Cassettes, Plus 35 Stems, and Quick Fill Plasma Valves. - Save weight, keep your drivetrain options open, and use the chain you want - 3-Bolt Direct Mount design for use with SRAM™ 3-bolt direct mount compatible cranks - Cut from billet AL-7075 for the highest strength and wear resistance - SRAM™ and Shimano™ 11 and 12 Speed Chain Compatible - Extensive CNC machining for lightweight and looks that kill - Available in 5 bold Ano colors and 4 sizes 28/30/32/34t - Match and personalize the way you want? - E*thirteen QuickConnect Direct Mount rings include 1mm spacers which allows them to be run on legacy cranks (TRS/LG1/XCX) as well as Helix and Helix R cranks - 3-bolt direct mount chainrings fit SRAM and other similar interface cranks - Tooth profile
$69.95 - $94.95
Customize your ride with The Helix Race Direct Mount Chainring. Made from ultra-lightweight and durable AL-7075-T6, this chainring offers compatibility with SRAM™/Shimano™ chains and features a flip-flop design for chain line adjustment. With bold color options that match e*thirteen's popular components, it's the perfect addition to your dream rig, ensuring maximum strength and longevity. - E*thirteen QuickConnect Direct Mount rings include 1mm spacers, which allows them to be run on legacy cranks (TRS/LG1/XCX), as well as Helix and Helix R cranks - 3-bolt direct mount chainrings fit SRAM and other similar interface cranks - Tooth profile is compatible with both Shimano and SRAM chains in both 11 and 12-speed - Can be flipped to provide either a 52 or 55mm chainline
$59.95
Lighter, stronger, and better looking than our original Guiderings; the Guidering SL is intended for use on TRS, LG1, and legacy e*thirteen cranks. The Guidering SL is -8mm offset. This offset will achieve both boost (52mm) and non-boost (49mm) spacing on e*thirteen cranks that feature adjustable chainline (2019 and newer TRS & LG1). On legacy and XCX cranks the Guidering SL will achieve a 49mm non-boost chainline. - Direct Mount chainring for TRS and LG1 cranks - Updated M3 narrow-wide tooth profile eliminates chain noise, and decreases overall system wear while retaining chain - 10/11/12 speed. Compatible with both Shimano and SRAM 12-speed drivetrains - Allows both Boost 148mm and non-boost 142mm chainline on adjustable TRS and LG1 cranks SL Chainrings are not compatible with Helix cranks. Helix cranks require Helix rings.
$69.95 - $79.95
UL Chainrings are the lightest 1x XC/Gravel chainrings on the market. Using the SL Chainring as the platform, we tweaked the arm design and strategically machined the chainring so that only minimal sacrifice was made in impact strength for large gains in weight reduction. - Direct Mount chainring for XCX, TRS, and LG1 cranks - Updated M3 narrow-wide tooth profile eliminates chain noise, and decreases overall system wear while retaining chain - 10/11/12 speed. Compatible with both Shimano and SRAM 12-speed drivetrains - Provides Boost 148mm chainline on XCX Mountain cranks and 142mm chainlines on XCX Gravel cranks - Provides chainline for Superboost spacing on TRS and LG1 cranks UL Chainrings are not compatible with Helix cranks. Helix cranks require Helix rings available soon.
$72.00
Compatible with *SRAM Direct Mount BB30 Narrow/Wide Snaggletooth chainring features our highly sought-after tooth profile. Combine this chainring with any modern-day clutch derailleur and never worry about dropping a chain again. - Highly sought-after narrow-wide tooth design provides excellent chain retention without a chain guide - Perfect for 1x setups and compatible with 9/10/11, and 12-speed systems. 9-speed drivetrains require a 10-speed chain - For SRAM DM Boost cranks, 3mm offset for a perfect 52mm chainline - For SRAM DM cranks, 6mm offset for a perfect 49mm chainline - CNC'd in Canada from 7075 aluminum with laser-etched graphics
$90.00
- CNC machined from single blocks of 7075 aluminum - Compatible with Cinch direct mount cranks - Available in Q-ring oval version
$72.00
Our Narrow/Wide Snaggletooth chainring features our highly sought-after tooth profile. Combine this chainring with any modern-day clutch derailleur and never worry about dropping a chain again. - Highly sought-after narrow-wide tooth design provides excellent chain retention without a chain guide - Perfect for 1x setups and compatible with 9/10/11, and 12-speed systems. 9-speed drivetrains require a 10-speed chain - For SRAM DM Boost cranks, 3mm offset for a perfect 52mm chainline - For SRAM DM cranks, 6mm offset for a perfect 49mm chainline - CNC'd in Canada from 7075 aluminum with laser-etched graphics
$76.95 - $81.95
More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval but without the funky, uneven pedal stroke. Ride one once and you’ll wonder why you waited so long to try oval. Think of an oval chainring as two chainrings in one. A major benefit of the oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body’s natural biomechanics. Here’s how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what’s known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power while behaving like a 32T chainring when you’re climbing. We’ve also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone. The direct mount chainrings for SRAM cranksets replace your existing spider and chainring with one clean-looking, lightweight, and stiff piece of machined billet. They are available in 3 different offsets: 6mm offset for 49mm chainline, 3mm offset for 52mm chainline, and 0mm offset for 55mm chainline and SRAM Transmission optimization. They are available in various tooth profiles to suit your drivetrain, including Drop-Stop B, which is optimized for SRAM T-Type Transmission and compatible with many other chains. Crankset and chainring compatibility questions? Check out our helpful guide here.
$12.00 - $40.00
64BCD chainring for MTB cranksets
$43.00
- CNC machined 7075/T6 aluminum with thick and thin tooth design for maximum chain engagement - Long tooth profile enhances chain retention
$26.00
Single-speed oriented chainring for 1x DH or DJ application. - 3mm thick CNC machined 7075-T6 aluminum
$97.00
Designed with ROTOR's oval chainring shape to take full advantage of your strongest pedaling point, the Direct Mount Oval chainring helps you get the most out of every trail ride and enduro race with less overall effort and fatigue required. This oval chainring is direct-mount compatible with Rotor R-Hawk and R-Raptor cranksets designed specifically for 1x drivetrains on all-mountain and enduro bikes. It's fully compatible with all modern groupsets, ranging from 9-speed through 12-speed drivetrains, giving you the perfect excuse to ditch your old 2x drivetrain for the efficiency gains and weight savings of a 1x set-up. Wide-narrow teeth mean you won't have to worry about the chain falling off, especially if you choose to ride without a chain guide. This oval chainring is CNC machined from 7075-T6 aluminum for a simplified design that saves approximately 40 grams compared to the ring, spider, and bolt combo you'd need with a more traditional chainring and crankset. This design also improves overall rigidity for powerful pedaling, as well as giving it slight advantages in the aero department. - 7075-T6 aluminum for optimal strength-to-weight - Oval chainring shape reduces the "dead spot" in pedal stroke - Direct-mount with ROTOR Kapic, INpower, 2INpower, RHawk, RRaptor cranksets - Semi-aero design improves rigidity and aerodynamics - Wide-narrow teeth for chain retention with 1x set-ups - Optimum Chainring Positioning personalizes to your pedaling - Compatible with 9, 10, 11, 12, and 13-speed groupsets (including SRAM AXS Eagle). - Weight: 51g per 32t
$155.00
110BCD & 130BCD Cold Forged road chainring sets are the result of relentless testing matched with the best materials and manufacturing processes to create some of the most durable and sweetest shifting sets available. - Designed for 5-arm standard, mid-compact, compact, and Cyclocross setups - One-Shot Cold Forging: The exclusive manufacturing process creates a more complex tooth profile and provides more shifting features on a chainring which normal CNC manufacturing won't allow. Individual tooth profiles, alternating tooth angles, timed ramps, and tactically placed shift pins are all jam-packed onto a Praxis ring. The process creates a harder and tougher tooth overall durability - LevaTime: Praxis unique timing and shifting technology. Several shift pins are placed strategically at points on the ring to provide a perfectly timed lift. Synchronized ramps are tuned with a specific inner ring, providing a clean channel for the chain to move - Not compatible with Campagnolo/Fulcrum Ultra-Torque/Racing Torque cranksets - Unauthorized online sales are prohibited by manufacturer * 32/48t rings: This is a custom ring set that can only be installed on the new Praxis Works branded 110BCD road cranks, and also the new Specialized alloy 110BCD spider. This specific set includes custom bolts required for installation. This set will not install on prior generation “TURN” road cranks or other brand cranks.
$147.99
The special PVD Rainbow Titanium coating process makes chainrings very durable and incredibly beautiful. NOTE: Due to the nature of the PVD process, every chainring is unique and color may vary. Not a single chainring is the same which makes your new ring completely individual - Designed to fit Shimano XTR M9100 , M9120, XT M8100, M8120, M8130, SLX M7100, M7120, M7130 and FC-MT900 cranksets - Works ONLY with CN-M9100, 8100 & 7100 chain - Oval rings help the rider to spin smoother and more efficiently - 32t is equivalent to 30t at the dead spot and 34t at the power zone - Narrow-wide tooth profile keeps the chain snug, allowing you to leave the chain guide behind - Designed in the UK, manufactured in Poland
$52.99 - $57.99
Improve chain retention, reduce drivetrain wear, and keep your bike running smoothly with a fresh 104 BCD chainring. We’ve designed the new 104 BCD ring to accommodate the added power and increased load from E-Bikes. The tooth profile eliminates chain drop and sheds mud. A simple upgrade you’ll notice every ride. - Narrow-wide teeth prevent unwanted chain drop - Perfect chainline with 2mm shims included with 32T and 34T rings (30T rings have built-in offset). For 2x crank conversions, shims between the crank and ring get you back to an ideal 49-50mm chainline - Excellent mud-shedding performance for extended ring life - Compatible with SRAM and Shimano 12-speed chains - Made from 7075-T6 aluminum alloy - Third-party online sales are strictly prohibited by the manufacturer
$69.95 - $86.95
"More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you’ll wonder why you waited so long to try oval. Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body’s natural biomechanics. Here’s how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what’s known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power, while behaving like a 32T chainring when you’re climbing. We’ve also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone. These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch chainrings feature our patented Drop-Stop® tooth profiles for the best wear life, chain retention and mud clearance. We have optimized tooth profiles for SRAM T-Type Transmission, Shimano Hyperglide+, and all 12, 11, 10, and 9-speed chains. Compatibility - Any Race Face Cinch™ system crankset (including Next SL, Sixc, Turbine, Aeffect) - Riders running SRAM Transmission w/ Race Face Cinch cranksets with a Boost 136/137mm spindle use a Cinch direct mount 0mm offset chainring. - Riders using a Cinch crankset with a Super Boost 151mm spindle use a Cinch direct mount 3mm offset chainring. - Standard (142mm rear hub spacing) 6mm offset, Boost (148mm hub spacing) 3mm offset, and Boost for T-Type Transmission 55mm chainline 0mm offset are available. - Use a 3mm offset chainring for Super Boost applications running standard drivetrains or Transmission. - Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability. - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) --- If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). - Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!) - Chainline 49mm (standard), 52mm (Boost), 55mm (T-Type Boost) - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! Without these precautions, you may experience chaindrops and/or chainsuck."
$34.99 - $36.99
Race Face Light Bash Guard Chainring Guards - Machined from AL-7075 - Compatible with all current and older Race Face cranks - Designed to protect your middle and inner chainring from impacts - Manufactured from bombproof, heat treated aluminum - CNC profiling gives a 25% weight savings over 'cookie cutter' bash rings - 4 bolt (104 BCD) configurations to cover rings from 32T through 40T
$54.99
- CNC-machined 6061-T6 aluminum with rounded tooth profile to reduce chain wear
$107.00
The radical look and feel of SRAM's X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. They subjected every size of chainring to untold environmental and mechanical tortures, abuse and neglect, in both lab and real-world settings, to come up with a chainring that would augment the Eagle drivetrain’s performance in all conditions. The longer, positive-rake tooth shape has been designed to work perfectly with the Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise and wear.
$99.00 - $107.00
Make SRAM 1x even better with the simplicity of the SRAM X-SYNC Direct Mount chainring. Engineered in Germany, the new Direct Mount rings brings lighter weight and greater simplicity to XX1, X01, X1-1400, and GX-1400 cranksets. SRAM’s Direct Mount rings give riders the perfect opportunity for a serious upgrade. - Fully CNC AL rings - X-SYNC technology - Lighter weight than spider version (~25-50g depending on size) - Offset: 0mm (BB30), 6mm (GXP)
$21.00
The SRAM X-Sync STEEL 1x chainrings are the perfect replacement ring for the cost conscious with added durability of steel. The same SRAM X-SYNC technology at a price well below competitors’ imitation “narrow wide” rings. Best performing chainrings at the best price. - Drivetrain Speeds: 10 , 11 - Material: Steel - Ring Position/Type: Single - Weight: 110 grams (32t), 96 grams (30t),
$59.49 - $76.49
Narrow/Wide tooth design for chain retention on 1x systems - 10 or 11 speed compatible - Mud clearing channels - CNC 7075 Swiss Alloy
$238.00 - $343.00
Shimano Dura-Ace 9000 11-Speed Chainrings. - Chainring BCD: 110 Shimano Asymmetric - Color: Silver/Black - Defined Color: Silver - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Outer
$69.99 - $74.99
Narrow wide chainrings compatible with Race Face CINCH system cranks. Direct mounting allows an easy switch between rings and spiders. - Compatible with 9, 10, 11, and 12 speed - Narrow Wide tooth profiling ensures consistent chain retention - Lockring installed/removed with ISIS BB tool - Stiff 4mm plate thickness to transfer loads without flexing
$21.00 - $74.00
Replacement PowerGlide ring for 11 speed crankset. - Compatible with Asymmetrical Yaw front derailleurs - Bolt Circle Diameter (BCD): 110 BCD - Material: Aluminum
$18.00 - $102.00
Shimano 105 FC-R7000 asymmetric 110 BCD chainrings for 2x11 drivetrains.
$75.99
Shimano STEPS E8000 chainrings are specially designed for STEPS drivetrain systems. - For use with E-Bike rear derailleur system compatible chain - Chainring for 50mm chain line
$64.99
The Shimano Deore XT SM-CRM85 chainring is designed for use with Shimano's M8100 and M8130 1x cranksets. - Special MTB gear tooth profile with Dynamic Chain Engagement+ improves chain engagement and retention - Direct Mount Type: Direct Mount Shimano - Tooth Count: 28T, 30T, 36T - Drivetrain Speeds: 12 - Defined Color: Black - Ring Position/Type: Chain-Retaining Single Ring - Round or Oval: Round - Chainline/Hub Compatibility: 141/148 Boost Hubs , 157 Super Boost Hubs
$74.99 - $78.99
absoluteBLACK Oval 104/64 BCD Chainrings greatly improve traction and climbing abilities. They are designed for use with all cranksets with a 104/64 BCD interface, including Shimano, SRAM, Race Face, FSA, and more. These chainrings allow you to run a 1x system without chain retention issues. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 9, 10, 11, and 12-speed Eagle compatible
$83.99
absoluteBLACK Oval Direct Mount 1x Chainrings for CINCH greatly improve traction and climbing abilities. They are designed for Race Face cranks that utilize the CINCH system. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 3mm offset is designed for bikes with Boost spacing and fat bikes (when reversed)
$88.95
This absoluteBLACK 1x Oval Direct Mount Chainring for CINCH is designed exclusively for use with Shimano Hyperglide+ chains (CN-M9100, 8100, and 7100). Oval chainrings greatly improve traction and climbing abilities. They are crafted from CNC machined 7075 aluminum for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%. - This chainring will only work with Shimano Hyperglide+ CN-M9100, 8100, & 7100 chains due to the different thickness of the teeth - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - 3mm offset is designed for bikes with Boost spacing and fat bikes (when reversed) - Provides excellent weight-to-strength ratio
$88.95 - $147.99
absoluteBLACK Oval Direct Mount 1x Chainrings for Shimano greatly improve traction and climbing abilities. They are designed for Shimano XTR M9100, XT M8100, and SLX M7100 cranks and will only work with 12-speed Hyperglide+ chains. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - This chainring will only work with Shimano CN-M9100, 8100, & 7100 Hyperglide+ chains due to the different thickness of the teeth - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio
$89.99
absoluteBLACK Oval Direct Mount 1x Chainrings for CINCH greatly improve traction and climbing abilities. They are designed for Easton EC90SL cranks or Race Face cranks that utilize the CINCH system. The super-stiff design is well suited for cyclocross and gravel riding. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-12.1%, with timing of 110.5-112.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 3mm Offset
$83.99
absoluteBLACK Oval 110 BCD 1x Chainrings for Cyclocross greatly improve traction for CX or gravel riding. They are designed for all Shimano 4-bolt cranks such as Dura-Ace 9100, 9000, Ultegra 8000, 6800, and more. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.5-11.4%, with timing of 112-113° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Provides excellent weight-to-strength ratio - 12-Speed Eagle compatible - Chainring bolts are included
$61.99 - $189.99
absoluteBLACK Premium Oval 110 BCD Road Chainrings utilize absoluteBLACK's top-tier design features to greatly improve traction and speed. They are designed for Shimano Dura-Ace 9100, Ultegra 8000, & 105 R7000 4-bolt cranks only. Optimized with smooth shifting in mind, premium chainrings have a 6-point ramp and recess design. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Chainring design reduces the possibility of leg cramps and allows you to maintain a better cadence while climbing - 10, 11, and 12-speed compatible - Ramps are designed specifically for a 50/34 combination - If only switching the inner chainring to oval, use all original crank bolts - 6.5% ovality is ideal for road climbing
$78.99
absoluteBLACK Round Direct Mount 1x Chainrings for CINCH allow for flawless boost drivetrain setup. They are designed for Race Face cranks that utilize the CINCH system. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 3mm offset is designed for bikes with Boost spacing and fat bikes (when reversed)
$49.99
absoluteBLACK Silver Series Oval 110 BCD Chainrings feature many of the same benefits as absoluteBLACK's Premium line, but with less material machined out on the outer side, allowing for easier maintenance and cleaning. They are designed for pre-2014 5-bolt cranks, such as Shimano Dura-Ace FC7900, Ultegra FC6750, Shimano 105 5750, and more. Optimized with smooth shifting in mind, these chainrings have a 6-point ramp and recess design. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - Designed for your winter/training bike where weight is not an issue, but ease of cleaning is - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Chainring design reduces the possibility of leg cramps and allows you to maintain a better cadence while climbing - Not compatible with SRAM hidden bolt cranks
$83.99
absoluteBLACK Oval 110 BCD 1x Chainrings for cyclocross greatly improve traction for CX or gravel riding. They are designed for all Shimano 5-bolt cranks such as Dura-Ace 7950, Ultegra 6750, Shimano 105 5750, and more. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.5-11.4%, with timing of 112-113° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 12-Speed Eagle compatible - Chainring bolts are included
$89.99 - $99.99
absoluteBLACK Oval 110 BCD 1x Chainrings for gravel greatly improve traction for gravel or road 1x setups. They are designed for all Shimano 5-bolt cranks such as Dura-Ace 7950, Ultegra 6750, Shimano 105 5750, and more. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.5-11.4%, with timing of 112-113° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Provides excellent weight-to-strength ratio - 12-Speed Eagle compatible - Chainring has 1.5mm offset toward frame to provide the perfect chainline - Chainring bolts are included
$78.99
absoluteBLACK Oval 96 BCD 1x Chainrings greatly improve traction and climbing abilities. They are designed for use with Shimano XT M8000, SLX M7000, and MT700 1x or 2x cranks only. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Only compatible with Shimano XT M8000, SLX M7000, and MT700 1x or 2x cranks - Chainrings fit boost and non-boost bikes, as correct offset is realized by the crank spider itself, not chainring - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Chainrings have built-in standoffs to provide the ideal 1X chainline - For 49mm chainline - Only use the included extra-long chainring bolts
$74.99
absoluteBLACK Oval 96 BCD 1x Chainrings greatly improve traction and climbing abilities. They are designed for use with Shimano XTR M9000 and M9020 cranks only. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Only compatible with Shimano XTR M9000 and M9020 cranks - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Rings have built-in threads for ease of mounting and reduction in weight - Not compatible with Shimano XT M8000 cranks
$34.00
FSA ATB and Pro ATB chainrings deliver flawless shifting. - Precision CNC-machined AL7075/T6 - Shifting ramps and SS pins - Material: Aluminum - Tooth Count: 36 - Ring Position/Type: Inner - Drivetrain Speeds: 11 - Chainring BCD: 96mm
$28.00 - $56.00
- Precision CNC-machined AL7075/T6 - Shifting ramps and stainless steel pins on outer rings - Laser-etched logo - Crankset Compatibility: Gossamer ABS 2019
$38.00
True value and performance are found in this FSA road chainring. It offers both long wear life and smooth shifting. - Stamped AL7075/T6 - N11 chainrings are compatible with all 10-speed drivetrains, and compatible with FSA, SRAM and Shimano 11-speed drivetrains - For 46/36T ring combination - Ramped and pinned for excellent shifting - FSA 120 BCD - 4-Bolt
$19.00 - $38.00
Shifting performance has helped Full Speed Ahead to become a world leader for high-end chainrings. No one studies the design and manufacturing of each system, and each tooth, as carefully as we do. Our dedication shows in every revolution of the crank, and every perfect shift achieved. To meet or exceed the needs of any drivetrain, Full Speed Ahead has developed sophisticated design, testing and manufacturing protocols. This allows Full Speed Ahead to match your needs as perfectly as our chainrings match a chain. We offer more options, levels, and finishes than our competitors. We use the best materials available, imported from the USA, Europe, or sourced from our qualified vendors in Asia, to guarantee the durability, performance, and appearance will out-perform, and outlast the competition. Full Speed Ahead chainrings have powered multiple World, Tour de France, and Olympic champions, and will exceed your expectations. - Stamped AL7075/T6 - Chainrings are compatible with all 10-speed drivetrains, and compatible with FSA, SRAM, and Shimano 11-speed drivetrains - Drivetrain Speeds: 11, 10
Page 1 of 6 Next page