Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Suspension

$1,099.99
The Cane Creek Helm MKII Air Suspension Fork features an upgraded damper design for increased support and control and a redesigned air spring that allows for increased air volume for better traction and suppleness. - D-Loc 15mm bolt-on thru-axle
$1,099.99
The Cane Creek Helm MKII Coil Suspension Fork features an upgraded damper design for increased support and control. - Compression and midvalve circuit offer increased support and control - SKF oil seal head cartridge and wiper seals are low friction - Damping features include: high speed compression, low speed compression, low speed rebound - Adjustment options include: high speed compression (10 positions), low speed compression (17 positions), low speed rebound (10 positions), indexed travel adjust system, spring pre-load adjust - Lightweight coil spring - 55 lb Lightweight Coil Spring included from factory
$1,099.99
- Double air spring system with independent positive and negative chambers - Adjustable from 130 to 160mm of travel internally - Redesigned air spring with threadless air seal head for service and travel change ease - Damper: Low speed rebound in addition to high and low speed compression adjustable; with 2.5wt damper oil and 11% lighter viscosity - Air volume adjustment with internal indexed system - Threadless aluminum steerer - 35mm low friction anodized upper tubes with SKF wiper seals - Post mount brake: minimum 180mm rotor with 210mm maximum rotor size - Boost 110: allows for a hub with a wider hub flange that provides the rider with a stiffer wheel for more precise steering - D-Loc 15mm bolt-on thru-axle - 27.5"+: 75mm wide by 739mm tall maximum tire size - 29": 64mm wide by 749mm tall maximum tire size
$1,099.99
The versatility of the Cane Creek HELM continues with the new HELM DJ. The new Cane Creek HELM DJ combines the proven performance, reliability and strength of the HELM MKII's chassis with a new short travel air spring optimized for Dirt Jumps, Dual Slalom and Street riding. Preset at 90mm travel and a 483mm axle to crown to accommodate a 26" wheel without changing the geometry of your dirt jump bicycle.
$1,099.99
In 2019 Cane Creek launched their WS130 down country low travel fork, 4 years later they are paying homage to the WS130 by introducing an extremely limited run of their low travel modular fork, the Works Series Helm. The Works Series Helm is a robust, modular fork that equips riders looking for a fork in the 100-130mm travel range with the confidence to ride through tech or push up climbs. The Works Series Helm is available in 4 travel options: 100mm, 110mm, 120mm and 130mm options. Like Cane Creek’s Helm MKII, the Works Series can easily be travel adjusted in 10mm increments with just a few tools at home. Built with a stiffer chassis, the Works Series gives a smoother, more controlled ride. All of Cane Creek’s suspension products are hand-built in Western North Carolina and rigorously tested in the Pisgah National Forest.
$699.00
The Beryl is a product aimed at the "set it and forget it" rider. The Beryl features all of the smooth qualities you've grown to expect from DVO in a condensed feature package. - D2 damper provides a 3-position low-speed compression adjuster to quickly go from a climb setting to wide open DH - OTT feature offers 3 settings of small bump compliancy to work with any air pressure or rider weight - Easy access external rebound adjuster provides a wide range to work with
$699.00
The Diamond D2 is the ultimate combination of simplicity and performance for the aggressive rider. With the same precision-designed chassis and 35mm stanchions as the D1 model, the Diamond D2 is a 140mm to 170mm aggressive trail weapon with condensed features. Four clicks of low-speed compression give quick access to firming up the fork for pedaling, opening up for descending, and mid-settings for everything in between. Externally adjustable rebound keeps for fork ready for what’s next. The internal 3-position OTT “Off The Top” adjusts the initial stroke. Our D2 product line is aimed at the “set it and forget it” rider. D2 offers all the buttery smooth ride characteristics unique to DVO but in a condensed feature package. - 3 position low-speed compression, rebound, internal 3 positions Off The Top (negative coil spring) adjustment, air spring - 140,150, 160, and 170mm travel options using internal spacers. Set to 170mm travel out of the box - 1-piece magnesium cast lower legs with fender mount with 35mm 7000 series aluminum upper tubes - 15x110mm thru-axle dropouts, 74mm post-mount disc brake only - Axle-to-crown 565mm
$749.00 - $999.00
Diamond For The Rough. In a time where standards are being reinvented every day, it's important to look through the clutter to find clarity. Find out what's actually here to stay and make an impact. We start with a simple question: What's going to improve the product and rider? The new Diamond has a host of features to cater to the aggressive rider who demands more. We gave the fork a top to bottom chassis overhaul with 10mm wider BOOST spacing that amplifies steering precision and control in the moments of "ultimate shred". We also increased the tire clearance, allowing you to utilize a bigger tire and still have clearance for mud. Six clicks of low-speed compression give quick access to firming up the fork for pedaling, opening up for descending, and mid settings for everything in between. Over thirty clicks of High-Speed Compression give precise control for support on big hits. Shim stack controlled rebound that is 100% dynamic which means the rebound is controlled based on the speed at which oil flows through the system. The fork will react to what you throw at it and be ready for what's next. Our industry-exclusive OTT feature really sets DVO products apart from anything else. It allows you to perfectly fine-tune how the initial stroke feels without any mid/end stroke compromise. You really get the best of both worlds. Combining the stiff chassis characteristics with our exclusive features and damping design gives our forks a unique ride feel unlike anything else on the market. - D1 Damper - Compression Bladder - OTT Off the Top Adjuster - Shim Stack Controlled Damping
$1,049.00
Ready For Rowdy The little brother to the Onyx DC, this is the Onyx SC D1. At 180mm of travel, this is our top-of-the-line enduro race fork. Featuring the proven D1 damper, high/low-speed compression, rebound, and externally adjustable OTT. With 36mm stanchions and our stiffest chassis yet, charge hard into the roughest sections with confidence. Six clicks of low-speed compression give quick access to firming up the fork for pedaling, opening up for descending, and mid settings for everything in between. Over thirty clicks of High-Speed Compression give precise control for support on big hits. Shim stack controlled rebound that is 100% dynamic. meaning, the rebound is controlled based on the speed at which oil flows through the system. The fork will react to what you throw at it and be ready for what's next. Our industry-exclusive OTT feature really sets DVO products apart from anything else. It allows you to perfectly fine-tune how the initial stroke feels without any mid/end stroke compromise. You really do the best of both worlds. Combining the stiff chassis characteristics with our exclusive features and damping design gives our forks a unique ride feel unlike anything else on the market. - D1 Damper - Compression Bladder - OTT Off the Top Adjuster - Shim Stack Controlled Damping
$1,199.00
Experience incredible steering precision, small bump sensitivity, and absolute control with the new Onyx 38. A unique E-Designed chassis, wider-than-ever stance, and burly 38mm stanchions launch the Onyx into a new era of MTB Suspension. All new demands require all new thinking. The Onyx D1 38 sets a new standard in E-Designed suspension. What does it mean to be specifically E-Designed? For years, the market has taken “acoustic” suspension and made after-thought upgrades in order to make it “E-Bike Approved”. Bumping up compression damping, using a slightly thicker crown, or just saying “Add 10 PSI” isn’t doing it right. E-Specific design means we thought about these needs from day one. How can we make a fork flex equally as one unit? How can we achieve unreal steering precision without the harshness or deflection? How can we control the fore and aft flex issues the added weight of an e-bike puts on a fork? Questions like these were the foundation, the bones of this concept. After years of engineering, different thinking, and countless hours testing, we nailed it. The final result wasn’t only a fork that met all the requirements and needs of a modern, aggressive E-bike, but it directly translated to a regular bike. NOT ONLY IS THIS THE PINNACLE OF E-BIKE SUSPENSION, IT’S THE NEW STANDARD FOR SUSPENSION. - Burly fork designed for the rigors of E-Bike use, providing steering precision without harshness or deflection - OTT (Off The Top) is an adjustable coil negative spring that allows the rider to dial in initial compliance without affecting the mid and end stroke - The D1 damper features updated high-flow compression and rebound porting to allow a linear suspension dynamic. This initial damping support without any high-speed harshness paired with a 30% increased volume in the Compression Bladder System results in increased small bump sensitivity and damping consistency - High flow linear rebound update increases response without a loss of control or damping - A purpose-built crown increases drop for extra down tube clearance and features a dual hollow bore design with strategically varied wall-thickness for improved stiffness and strength
$27.00 - $29.00
Service your suspension fork with Enduro Seal KIts. - Custom made for each make and model of fork
$15.00
Air spring seal kits for Fox suspension repair and rebuild.
$549.00
Whether you’re racing to make it to your meeting across town or striving for a personal best down your favorite new trail, the AWL e-SUV fork will get you there on time and in style. Featuring an all-new chassis, RAIL damper, and different travel options, the AWL is equipped to forgive rock and roots as well as curbs and potholes. Includes integrated mounts for fenders, lights and accessories. - Award-winning RAIL damper delivers premium suspension performance with simple yet effective adjustability and maximum durability - Stiff 34mm e-optimized chassis meets the most stringent e-bike testing standards - Integrated fender and light mounts delivery maximum versatility - Clearance for tires up to 2.6” wide - 160-230 mm rotor compatible
$549.00
Whether you’re racing to make it to your meeting across town or striving for a personal best down your favorite new trail, the AWL e-SUV fork will get you there on time and in style. Featuring an all-new chassis, RAIL damper, and different travel options, the AWL is equipped to forgive rock and roots as well as curbs and potholes. Includes integrated mounts for fenders, lights and accessories. - Award-winning RAIL damper delivers premium suspension performance with simple yet effective adjustability and maximum durability - Stiff 34mm e-optimized chassis meets the most stringent e-bike testing standards - Integrated fender and light mounts delivery maximum versatility - Clearance for tires up to 2.6” wide - 160-230 mm rotor compatible
$769.00
Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Performance rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor. - Black anodized upper tubes - 32 mm upper tubes and ample bushing overlap for a quality ride - Hollowed out lower legs provide even more weight savings - FIT GRIP damper and FLOAT air spring - Performance Series black-on-black graphics package
$769.00
Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Performance rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor. - Black anodized upper tubes - 32 mm upper tubes and ample bushing overlap for a quality ride - Hollowed out lower legs provide even more weight savings - FIT GRIP damper and FLOAT air spring - Performance Series black-on-black graphics package
$769.00
Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Performance rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor. - Black anodized upper tubes - 32 mm upper tubes and ample bushing overlap for a quality ride - Hollowed out lower legs provide even more weight savings - FIT GRIP damper and FLOAT air spring - Performance Series black-on-black graphics package
$769.00
With a FLOAT EVOL air spring and on-the-fly compression adjustability, 32 Taper-Cast Performance delivers just enough tunable travel to take the edge off of wherever your gravel adventures may lead you. - 700c chassis with clearance for large volume tires (50 mm max) - Black anodized 7000 series aluminum stanchions and 12x100mm bolt-on thru axle - FLOAT EVOL Air Spring and GRIP damper, featuring three on-the-fly settings - Open, Medium, and Firm - Lightweight air spring optimized for short-travel - Lightweight 32mm Step-Cast chassis with Lower Leg Air/Oil Bypass Channels - Integrated full fender mounts (700c x 45 mm max with fender)
$779.00
Designed for trail riding, the Factory Performance 34 features a FIT GRIP damper, FLOAT EVOL air spring, and lightweight chassis. The 34 provides proven trail performance that instills confidence and control. - Black anodized upper tubes - FIT GRIP damper and FLOAT EVOL air spring - Performance Series black-on-black graphics package SPECIFICATIONS - Positive Spring: Air - Wheel Size: 29" , 27.5+ - Brake Type: Post Mount 160 - Crown Race: 40 - External Adjustments: Low Speed Compression Damping , Rebound Damping - Negative Spring: Air - Stanchion Diameter: 34 - Steerer Type: Tapered - Maximum Tire Width: 64 - Offset: 44 - Color: Matte Black - Steerer Tube Length (mm): 264 - Front Axle: 15mm Thru x 110mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Travel (mm): 140 - Axle to Crown Length: 547 - Lockout Switch: Crown
$849.00
The 34 Step-Cast Performance is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Black anodized upper tubes - FIT GRIP damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities - Performance Series black-on-black graphics package SPECIFICATIONS - Positive Spring: Air - Wheel Size: 29" , 27.5+ - Brake Type: Post Mount 160 - Crown Race: 40 - External Adjustments: Low Speed Compression Damping , Rebound Damping - Negative Spring: Air - Stanchion Diameter: 34 - Steerer Type: Tapered - Maximum Tire Width: 66 - Offset: 44 - Color: Matte Black - Steerer Tube Length (mm): 264 - Front Axle: 15mm Thru x 110mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Travel (mm): 120 - Axle to Crown Length: 530 - Lockout Switch: Crown
$849.00
The 34 Step-Cast Performance is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Black anodized upper tubes - FIT GRIP damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities - Performance Series black-on-black graphics package
$919.00
THE HARD CHARGING DO IT ALL TRAIL FORK Smoother, lighter, more tunable, and more capable than ever before; when it comes to a do-it-all trail fork the 34 is in a class of its own. - LOWER LEG BYPASS CHANNELS As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Our lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. - LOWER LEG ARCH Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. - GRIP2 Our GRIP2 damper is the benchmark for unparalleled ride quality and ultra-precise adjustability. GRIP2 includes our patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance. GRIP2 achieves with the twist of a knob what typically requires the time consuming and complicated task of completely disassembling and reassembling the fork. -FLOAT EVOL Returning with the same legendary suppleness and longevity, the EVOL air spring in 34’s now has an enlarged negative air spring to assist with mid-stroke support. - Performance-Elite series with black anodized stanchions - Step Cast (SC) legs with narrow stance and stepped design to saves weight, decrease frontal area, and provide clearance for the spokes and brake rotor - FIT4 damper with 3-position damper control - 160mm to 203mm rotor compatible post mount - Lightweight Kabolt thru-axle - Tapered threadless steerer
$949.00
Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Factory rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor. - Genuine Kashima Coating on upper tubes - 32 mm upper tubes and ample bushing overlap for a quality ride - Hollowed out lower legs provide even more weight savings - FIT4 damper and FLOAT air spring
$969.00
34 Factory is the ultimate trail companion. Featuring an EVOL air spring, choice of dampers, and a lightweight yet robust chassis, you can count on 34 to get up and down the mountain, every time. - Genuine Kashima Coating on upper tubes - FLOAT EVOL air spring
$969.00
34 Factory is the ultimate trail companion. Featuring an EVOL air spring, choice of dampers, and a lightweight yet robust chassis, you can count on 34 to get up and down the mountain, every time. - Genuine Kashima Coating on upper tubes - FLOAT EVOL air spring
$989.00
The 38 Performance Series forks retain the same black anodized 7000 series aluminum upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. - Black anodized upper tubes - FIT GRIP damper and FLOAT EVOL air spring - Three on-the-fly compression damping positions: Open, Medium, Firm - Performance Series black-on-black graphics package
$1,019.00
34 Factory is the ultimate trail companion. Featuring an EVOL air spring, choice of dampers, and a lightweight yet robust chassis, you can count on 34 to get up and down the mountain, every time. - Genuine Kashima Coating on upper tubes - FLOAT EVOL air spring SPECIFICATIONS - Positive Spring: Air - Wheel Size: 29" , 27.5+ - Brake Type: Post Mount 160 - Crown Race: 40 - External Adjustments: High Speed Compression Damping - Negative Spring: Air - Stanchion Diameter: 34 - Steerer Type: Tapered - Maximum Tire Width: 64 - Offset: 44 - Color: Shiny Black - Steerer Tube Length (mm): 264 - Front Axle: 15mm Thru x 110mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Travel (mm): 140 - Axle to Crown Length: 547 - Lockout Switch: None
$1,019.00
The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Genuine Kashima Coating on upper tubes - FIT4 damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities - Kabolt Thru Axle
$1,019.00
The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Genuine Kashima Coating on upper tubes - FIT4 damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities
$1,019.00
The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Genuine Kashima Coating on upper tubes - FIT4 damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities - Kabolt Thru Axle
$1,039.00
Competition drives innovation, and as cross-country athletes and course designers push the boundaries of lightweight components, 32 Step-Cast Factory rises to meet the demand. A redesigned crown for 2020 increases stiffness to the same level as the trail-proven 34. The distinct shape of the Step-Cast chassis uses a narrow stance to save weight and the step design makes room for the spokes and brake rotor. - Genuine Kashima Coating on upper tubes - 32 mm upper tubes and ample bushing overlap for a quality ride - Hollowed out lower legs provide even more weight savings - FIT4 damper and FLOAT air spring
$1,069.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment
$1,079.00
The award-winning 36 with FIT4 adjustable damper features patent-pending Variable Valve Control (VVC) high- and low-speed rebound adjuster, improved compression damping, and less friction overall. With all this and the legendary Fox feel, the 36 offers a level of performance and adjustability sought by today's riders. "Factory" says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth and ultra durable Genuine Kashima Coat. These products are World Cup proven. Buttery smooth Kashima's distinctive gold color is backed by its high performance attributes—properties that provide an exceptionally smooth feel and extreme durability. EVOL — Air Transfer Port System Our EVOL linear spring curve gives forks and shocks plushness off the top, extra mid-stroke support, and more tunable bottom-out progression, allowing riders to tap into the ideal pairing of front and rear-end feel. FLOAT EVOL Air Spring EVOL technology from rear shocks is integrated into all FOX forks. EVOL increases negative air spring volume, specifically positioned and sized for optimum small bump sensitivity.
$1,079.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvements
$1,089.00
34 Factory is the ultimate trail companion. Featuring an EVOL air spring, choice of dampers, and a lightweight yet robust chassis, you can count on 34 to get up and down the mountain, every time. - Genuine Kashima Coating on upper tubes - FLOAT EVOL air spring
$1,089.00
The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Genuine Kashima Coating on upper tubes - FIT4 damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities
$1,089.00
The 34 Step-Cast Factory is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Genuine Kashima Coating on upper tubes - FIT4 damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities - Kabolt Thru Axle
$1,139.00
36 E-Optimized Factory forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses. - Genuine Kashima Coating on upper tubes - FIT GRIP2 Damper and FLOAT air spring - E-Bike Chassis - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment
$1,139.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment
$1,149.00
36 E-Optimized Factory forks are made specifically for the rigors of E-Bikes with a stouter chassis and longer durability due to adding material to strengthen critical areas. The design also uses tuning originally done for Enduro use, which fits the needs of the E-MTB and overall E-Bike uses. - Genuine Kashima Coating on upper tubes - FIT GRIP2 Damper and FLOAT air spring - E-Bike Chassis - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvements
$1,149.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvements
$1,149.00
The award-winning 36 with FIT GRIP2 4-way adjustable damper features patent-pending Variable Valve Control (VVC) high- and low-speed rebound adjuster, improved compression damping, and less friction overall. With all this and the legendary Fox feel, the 36 offers a level of performance and adjustability sought by today's riders. "Factory" says it all. The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth and ultra durable Genuine Kashima Coat. These products are World Cup proven. Buttery smooth Kashima's distinctive gold color is backed by its high performance attributes—properties that provide an exceptionally smooth feel and extreme durability. GRIP2 — Next-Generation Sealed Cartridge FIT Damper GRIP2 is our next-evolution sealed cartridge FIT system, our highest performing gravity-focused damper. The new damper shares its roots with the original GRIP architecture, but has been seriously enhanced with all-new technology: 4-way adjustability, VVC high-speed rebound circuit, high-performance mid-valve, and overall friction-reducing treatments. EVOL — Air Transfer Port System Our EVOL linear spring curve gives forks and shocks plushness off the top, extra mid-stroke support, and more tunable bottom-out progression, allowing riders to tap into the ideal pairing of front and rear-end feel. FLOAT EVOL Air Spring EVOL technology from rear shocks is integrated into all FOX forks. EVOL increases negative air spring volume, specifically positioned and sized for optimum small bump sensitivity.
$1,149.00
Own the mountain with the award-winning 36 Factory, featuring high- and low-speed rebound adjuster, improved compression damping and reduced friction for unmatched performance and adjustability. - Genuine Kashima Coating on upper tubes - FIT damper and FLOAT EVOL air spring - Low friction seals for improved performance - Lower Leg Bleeders and Bypass Channels - Floating axles for perfect alignment - Updated Crown Design saves up to 20 grams, and offers significant structural improvements
$1,149.00
FOX 38 Performance Elite Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. Performance Elite forks retain the same adjustments, features, dampers, weight, and 7000 series aluminum upper tubes as Factory Series, but have black anodized stanchions. - GRIP2 damper includes Fox's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance - Next generation FLOAT EVOL with larger negative air chamber increases small bump sensitivity - Floating axle design provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality - Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button - Equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release - Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping
$1,249.00
E-Bike specific long-travel Enduro fork with 38mm stanchion tubes featuring, floating axle, new arch design, and lower leg bleeders to release built-up pressure. - Genuine Kashima Coating on upper tubes - GRIP2 damper with Variable Valve Control - Next generation FLOAT EVOL with larger negative air chamber increases small bump sensitivity - Floating axle design - Lower leg bleeders - Direct mud guard mount
$1,249.00
FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. - The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs - Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality - The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release - Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping - Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button - The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding
$1,249.00
FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. - The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs - Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality - The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release - Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping - Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button - The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding
$1,249.00
FOX 38 Factory Series Suspension Fork is the long-travel enduro specialist. It redefines what you think a long travel single crown fork is capable of, and sets a new benchmark for confidence, performance, and durability. - The floating axle offers a distinct performance advantage due to its unique ability to match the exact width of the fork’s wheel mounting surface precisely to the front hub flange spacing, thus creating perfect chassis alignment and eliminating unwanted friction between the upper and lower fork legs - Floating axles provide much smoother suspension movement throughout the entire range of the fork’s travel, notably improving sensitivity and overall ride quality - The 38 Fork comes equipped with a quick-release lever operated patent-pending floating axle system, combining the benefit of a floating axle with the ease of a tool-free quick-release - Lower leg bypass channels alleviates air pressure by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping - Lower leg bleeders allow for atmospheric pressure equalization at the simple press of a button - The 38's lower leg arch design pulls out all the stops, shaving every possible gram while making sure not to compromise stiffness or strength requirements of modern enduro and gravity style riding - GRIP2 damper includes Fox's patented Variable Valve Control (VVC) technology which allows for external fine-tuning of suspension performance - FLOAT EVOL air spring technology increases negative air spring volume, optimizing small bump sensitivity - Direct mud guard mount - Genuine Kashima Coating on upper tubes - 27.5: 723mm peak tire diameter
$1,819.00
The 40's GRIP2 damper delivers ultimate performance and control when the going gets rough. Equipped with the Variable Valve Control (VVC) high- and low-speed rebound adjuster, improved compression damping and less friction overall, the 40 is just as comfortable in the bike park as it is racing the World Cup circuit. - Genuine Kashima Coating on upper tubes - Variable Valve Control (VVC) - Low friction seals for improved performance - FIT GRIP2 damper and FLOAT EVOL air spring - 29": 755mm peak tire diameter
$9.99
- Protective neoprene and velcro cut-To-Fit boot fits most rear shocks
$1,049.95
- All Mountain/Enduro fork with 35mm stanchions - Twin-tube damper with low-pressure IFP and air spring (positive and negative air chambers), internal travel adjustment (120-160mm of travel in 5mm increments*) easily adjustable, and all parts included - ChocoLUXE Internals - ChocoLUXE is a proprietary material utilized in the damper plug, damper seal, damper IFP, and damper support. - Norglide Bushings—Norglide Bushings from Saint Gobain are metal-reinforced, self-lubricating bushings with a layer of a low friction PTFE compound. - Damper adjustments include air spring pressure, 8-position compression, ramp control (air spring ending stroke feel), and rebound - Ramp Control—'on the fly' ending stroke compression adjustment - 74mm post-mount 180mm disc brake only - Boost 15x110mm QR thru-axle - Every MRP fork is built in the MRP factory and dyno verified to ensure the highest level of quality and ensure long-term reliability - 4.2lb (1950g)
$21.50
- Replacement leg guards for Dorado forks
$97.90
- Replacement damper kits
$259.99
Handles terrain like a goat. Just because you're on a budget doesn't mean you can't ride a suspension fork that gives you excellent, smooth control. The Markhor features our KwikToggle damper with easy on/off lockout. With travel between 100mm and adjustable to 120mm, 80-100mm on (26"), the Markhor fork smooths out any line the trail puts in front of you. - Cost-effective and lightweight air spring fork that features the same Twin-Piston Chamber (TPC) rebound damping as the more expensive Manitou forks - 30mm aluminum stanchions with aluminum steerer - 100mm or 120mm Travel - 80-100mm on (26") - TS Air Spring - Kwik Toggle Compression Damping - TPC Rebound Damping
$299.99
Handles terrain like a goat. Just because you're on a budget doesn't mean you can't ride a suspension fork that gives you excellent, smooth control. The Markhor features our KwikToggle damper with easy on/off lockout. With travel between 100mm and adjustable to 120mm, 80-100mm on (26"), the Markhor fork smooths out any line the trail puts in front of you. - 100mm or 120mm Travel - 80-100mm on (26") - TS Air Spring - Kwik Toggle Compression Damping - TPC Rebound Damping - 30mm aluminum stanchions with aluminum steerer - Cost-effective, lightweight air spring fork that features the same Twin-Piston Chamber (TPC) rebound damping as the more expensive Manitou forks
$314.99
The Circus project started as a way to get our slopestyle riders into competition, but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade. - Coil Spring - ABS+ Compression Damping w/ Jump Stack - Adjustable TPC Rebound Damping - Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping - 20mm hex axle provides superior torsional stiffness - Forged I-beam style crown: bigger, stronger and more durable - 1-1/8" threadless steel steerer and 32mm steel stanchions - Can be reduced to 80mm travel with included spacers
$314.99
Handles terrain like a goat. Just because you're on a budget doesn't mean you can't ride a suspension fork that gives you excellent, smooth control. The Markhor features our KwikToggle damper with easy on/off lockout. With travel between 100mm and adjustable to 120mm, 80-100mm on (26"), the Markhor fork smooths out any line the trail puts in front of you. - Cost-effective and lightweight air spring fork that features the same Twin-Piston Chamber (TPC) rebound damping as the more expensive Manitou forks - 30mm aluminum stanchions with aluminum steerer - 100mm or 120mm Travel - 80-100mm on (26") - TS Air Spring - Kwik Toggle Compression Damping - TPC Rebound Damping
$314.99
Handles terrain like a goat. Just because you're on a budget doesn't mean you can't ride a suspension fork that gives you excellent, smooth control. The Markhor features our KwikToggle damper with easy on/off lockout. With travel between 100mm and adjustable to 120mm, 80-100mm on (26"), the Markhor fork smooths out any line the trail puts in front of you. - 100mm or 120mm Travel - 80-100mm on (26") - TS Air Spring - Kwik Toggle Compression Damping - TPC Rebound Damping - Cost-effective and lightweight air spring fork that features the same Twin-Piston Chamber (TPC) rebound damping as the more expensive Manitou forks - 30mm aluminum stanchions with aluminum steerer - Requires 15x110mm Boost front hub
$382.49 - $464.99
The Machete is purpose-built for slicing trails, with Kwik Toggle compression damping inspired by our renowned Absolute+ technology. Kwik Toggle achieves on/off lockout simplicity in a lightweight, practical package. - TS air spring with in-leg adjustable TPC rebound damping - Kwik-Toggle damper with lockout, adjustable rebound, and high-speed compression - 32mm black anodized stanchions with hollow bore forged aluminum crown - Easily upgradeable to remote using MILO upgrade kit part #314934 - Travel is internally adjustable from 80 to 120mm in 10mm increments - Disc brake only (74mm/6" post-mount) - 27.5x3.0"/29x2.5" maximum tire width
$474.99
The Circus project started as a way to get our slopestyle riders into competition, but it wound up becoming an industry-leading dirt jump fork for riders all over the world. Circus has set the benchmark for everyday riders' jump session requirements and delivered podium results at pro-level competitions for almost a decade. - 80/100mm or 120/130mm Internally Adjustable Travel - Air Spring - ABS+ Compression Damping w/ Jump Stack - Adjustable TPC Rebound Damping - Wheel Size: 26" - 130mm travel models can be reduced to 120mm and 100mm models can be reduced to 80mm travel using included spacers - 20mm hex axle provides superior torsional stiffness - Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping - Forged I-beam style crown: bigger, stronger, and more durable - Alloy steerer, and 32mm aluminum stanchions
Page 1 of 3 Next page