FSA's K-Force Compact Road Handlebar features a racy compact design for improved ergonomics and rider comfort. Its continuous carbon/Kevlar construction is super light and impressively stiff, making it perfect for climbing and big out-of-the-saddle efforts. It also has a 110mm center section for mounting accessories and its reinforced, textured clamping areas hold tight and secure.
Fizik's Cyrano R1 Handlebar gives every cyclist the same low weight, high stiffness, and incredible ergonomics that the pros use. These carbon handlebars use Fizik's unique Spine Concept fitting technology to offer incredible ergonomics and a perfect fit on your bike. Designed for total compatibility with Fizik's saddles and stems (sold separately), the Cyrano 00 Snake handlebar optimizes your position for race day performance.
All Jones H-Bars use a 31.8mm stem clamp diameter, 22.2mm clamp size for controls (standard mountain bike style). All my bars are H-bars. H-bar for Handle-Bar. They have the 45 degrees of sweep, the 0.5" vertical offset, and a multitude of hand-positions. But could I offer more, with less? Yes. Back to basics, back to the beginning, with a twist. Well, with a bend....the Bend H-Bar. The original concept, the 45 degrees of sweep but with the bend, where it is, ensures shifters and levers are a simple fit and the one piece butted aluminium construction delivers a bar 170g lighter than a Loop. Less hand position options, less stuff-mounting space, marginally less stiff but all you might ever need in an H-Bar. No more, no less. The Jones Bend H-Bar. The bikes I ride for long distances or at night have the Loop H-Bars so I have more hand positions and mounting points. The Bend H-Bar is nice for bikes that don't need things attached to the front of the bar (light, GPS, etc.) or an aero position. I am using the Bend H-Bar on my single-track day riding bikes and it's great. Widths - 710mm 355 grams (Best with Jones 205mm Grips)
The Flat Top RDO 780mm Handlebar features the same shape and carbon tuning for ride quality and comfort as all of Niner’s carbon components - all backed up with our C5 Carbon Warranty - a 5 year guarantee. 780mm width with cut-down marks to 720mm Bar-end compatible +/- 5mm rise via Flat Top Design, 9º Sweep 195g (full 780 width) Backed by Niner’s C5 Carbon warranty 31.8 camp diameter
Building on PRO’s knowledge of making elite road and off-road bars comes the DISCOVER range of flared bars to give riders more control in varied off-road situations. - 12 degree flare for optimal riding position - AL-6066 construction for increased rigidity - Shimano DI2 integration - Ergonomic top section for multiple hand positions - The ideal handlebar for long gravel rides
The Pro PLT Compact handlebar is constructed of light and strong AL-2014 DB aluminum. It features a compact bend for an ergonomic position while riding in the drops.
$109.99 - $114.99
An ultra-high performance handlebar constructed to ride the most punishing conditions. The PRO Vibe Alloy handlebar is built to meet cycling’s highest demands using state of the art technology. The Vibe Alloy is developed with Di2 in mind offering ultimate integration for maximum aerodynamic performance and ultra-clean styling.
An ultra-high performance handlebar constructed with Innegra fibers to ride the most punishing conditions. The PRO Vibe handlebar is built to meet cycling’s highest demands using state of the art technology. The Vibe is developed with Di2 in mind offering ultimate integration for maximum aerodynamic performance and ultra-clean styling. The carbon PRO Vibe handlebar series is constructed from high-performance Innegra fiber. The addition of Innegra fibers strengthens the bar’s most vulnerable areas without compromising its weight, so your handlebar is ready to ride the harshest conditions. - UD carbon construction - Integrated brake and shift cable routing (Also for Shimano Di2) - Anatomic and compact design
The Vibe Superlight handlebars feature a compact design and an ergonomic oversized top section for supreme comfort on the road. It's constructed of a super-light UD carbon fiber layup with Innegra fiber. The integrated brake and shift cable routing matches perfectly with Shimano Di2.
Profile's Ultra FR is a tough riser bar that gives you extra control in technical sections and confidence on rough descents. It's made of double-butted 6061-T6 aluminum, which offers superior strength and stiffness and weighs next to nothing.
Profile's Stoker 26 Base Bar features a 26.0mm diameter the entire length across the bar, allowing the widest aero bar clamping area that Profile makes. This makes the bar ideal if you have a wide aero position or need a comfy stoker bar for your tandem. Made from double-butted 6061 aluminum, the Stoker 26 is light, not to mention shot peened and anodized for added strength and durability. Plus, it's pre-drilled for internal cable routing for aerodynamics and a clean look.
The WING/10a offers great fit versatility - allowing the rider to fine-tune the grip height for their riding style and comfort preferences. The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. For optimal aero performance, the bar should be set in the low position to increase the separation from the armrests. Aero The Wing/10a employs a truncated airfoil (Kamm Tail) to stay within UCI regulations while offering the performance of a much deeper section. This, along with tidying up the underside of the wing where the cables used to exit has led to a small improvement in performance. For optimal aero performance the bar should be set in the low position to increase the separation from the armrests. Fit Data - The WING/10a is available in the following widths: 36, 38, 40, 42, 44 - The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. The grip length can also be trimmed by up to 30mm. - The WING/10a offers the greatest fit versatility of any alloy basebar we’ve previously made, allowing the rider to fine tune for their riding style and comfort preferences. - An additional reason for the truncated design of the wing was to improve hand comfort when sitting up on the bar tops
Reversible basebar wing improves fit for bicycles with smaller headtubes. Two-Way Fit System: Standard fit provides a low drop for aggressively positioned athletes who favor or fit needs dictate a low out-of-the-aerobars position which translate to fast, aggressive riding style. Flip the bar for an elevated position ideal for riders requiring higher stack in their cockpit position and higher relative pursuits. - Straight Brake Extensions: Straight, ergonomic brake extensions help maintain control while remaining aerodynamic. - Clean Cable Routing Pre-slotted internal cable routing on both sides for a clean profile. Di2 Compatible. - Weight: 220g (42cm) - Width: 40cm (center to center) - Center Clamp Diameter: 31.8mm - Clamp Width: 100, 120, 140mm - (44mm) - Clip Compatible: Yes - Material: Multi-Direction, Multi-layer Carbon Fiber - Pursuit Reach: 160mm (center to tip) - Pursuit Drop: ±20mm - Pursuit OD/ID: 25.4 / 19.5mm - Drop Outsweep: No
The Aeria Evo maintains the aerodynamics of the original version but increases the ability for the rider to get into their best possible position. The expanded fit range and tilt capability make it a class leader for adjustment and position optimisation. Specifications - The Aeria Evo is an update of our well proven Aeria bar. We have evolved the fit range of the bar with new brackets, armrests and extensions. - The new brackets add the ability to tilt the entire assembly, as well as letting the armrests - go much narrower than the first generation design. - A 35 degree ski-bend extension suited to riders who prefer to adopt a wrist angle that is on the low side of the neutral range. - The new Ergo armrests increase rider comfort with a smoothly curved shape and expand the fit range with an expansive set of adjustment options. - The extension rotation can be easily adjusted using the shaft bolt. There is a 40mm range of extension length adjustment once the extensions have been cut. - The bracket can be tilted by up to 10 degrees. - There are 100 distinct position options achievable just by moving the armrests. Combine that with the risers and this bar offers 1700 possible configurations of Reach, Stack and Pad Width. Adding in the tilt factor magnifies this adjustment range even further. - All hardware and component pieces were not only designed for performance and ease of use but also strength. - Basebar Width: 42cm (Center-to-Center) - Basebar: Carbon - Pursuit Reach: 157.5mm (center to tip) - Bracket: Aeria Evo (6061-T6 aluminum) - Armrest: Ergo - Armrest Stack: 56mm to 80mm (5mm Increments) - Armrest Offset: -66mm to 1.5mm (7.5mm Increments) - Armrest Width: 100mm to 266mm (18.5mm Increments) - Extension Length Adjustment: 40mm - Extension Length: 340mm - Extension Height: 80mm - Extension Angle: 35° - Extension Material: 6061-T6 aluminum, pre-drilled for bar-end shifter cable - Armrest Rotation: 7° - Bracket Tilt Adjustment: 0-10° - Weight: 809g
Race Face's Chester bar is made of tough 6061 alloy with the perfect width, sweep and rise to be at home on both your DH and hardtail rigs. These bars will last long after your bones, bruises and scrapes heal up and you’re ready to tackle that gap jump that has had your number. Features - Manufactured from cold drawn, seamless 6061 Alloy. - Butted for an optimal strength to weight ratio. - Wider construction & re-designed taper offers - 740mm wide - 9° rearward, 6° upward
The Race Face Aeffect handlebar is a budget-friendly alloy bar intended for XC and Trail use — the most affordable option for riders looking for a 35mm handlebar. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 8°
A slightly modified profile gives the RaceFace Aeffect R handlebar the extra boost you’re looking for at high speeds. Built for tearing down your favorite trail...fast. Generous 780mm width to give you the stance and control you need. This is a no-nonsense, set-and-forget bar that is equally at home on your trail bike as it is on an enduro machine. Take your bike to the Rally level without breaking the bank. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 9°
Race Face Atlas riser handlebar with an anodized, shot-peened finish. - Anodized, shot-peened finish - Cold-drawn and butted proprietary AirAlloy aluminum tubing - 4 degree upsweep
Race Face Atlas riser handlebar with an anodized, shot-peened finish. - Aonodized, shot-peened finish - Cold-drawn and butted proprietary AirAlloy aluminum tubing - 4 degree upsweep
Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it? - Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform - Requires 35mm bar clamp diameter stem - Full 800mm width that can be trimmed down to a minimum 750mm - 8 degree rearward sweep, 5 degree upward sweep
- Intended for Cross Country and Trail use - 1/4 Risers have a 2deg upsweep - Unidirectional carbon fiber with reinforced stem anti-crush zone - Bar Clamp Diameter: 31.8 mm - Bar Rise: 5 mm - Bend: 8 deg - Weight: 175 g
The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face's SixC bars. DH strength and Enduro weight for when you really need to lean into it. - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - 35mm bar diameter for incredible strength/weight ratio
Race Face set an industry benchmark with the its Sixc product group - light and strong carbon DH rated crank and bar. Building on the unprecedented success of their proprietary Carbon Technology program, SIXC rewrites the rules in the 6-8 inch travel bike world. SIXC (the C is silent, eh!) represents the culmination of years of Race Face engineering in both carbon and all mountain products. Race Face has created a bar for the aggressive rider who demands the ultimate in performance. Strong enough for DH, yet light enough to not hold you back on the pedal up to that new trail you have been hearing so much about, SIXC blows up the limits of carbon performance. - SIXC bars are manufactured with a leading edge composite material which allows us to reach our high strength requirements at an impressively low weight - Minimum bar width of 28" or 710mm at indicated cut marks - Reinforced clamping zones for lock-on grip - Daily destructive testing from each production run ensures each bar meets the exacting standards set by our engineers
With a classic 25.4mm clamp diameter, the extra-tall 30mm of rise gives way to comfort and added control for an economic option for any classic mountain bike build. - Material: 6061 alloy - Width: 670mm - Rise: 30mm - Backsweep: 9° - Upsweep: 2° - Clamp diameter: 25.4mm - Bar-end compatible: yes - Weight: 399g
The standard for which Ritchey performance is based on. Race-worthy components priced for the casual cyclist. - Gentle sweep for ergonomic performance - Bar Clamp Diameter: 31.8mm - Width: 740mm - Back Sweep: 9 degrees - Weight: 380g - Material: Alloy
$33.95 - $39.95
The Richey Comp Curve Road Handlebar features a short reach, shallow drop and a smooth double radius drop section. - Double butted 6061 aluminum - Aero bar compatible - Bar Clamp Diameter: 31.8mm - Bar Drop: 128mm - Bar Reach: 73mm - Bar Top Style: Round - Accessory Mount Diameter: 31.8 - Drop Bend Style: Compact - Cable Routing: External - Clip-on Compatible: Yes - Flare: 0
The standard for which Ritchey performance is based on. Race-worthy components priced for the casual cyclist. - Double butted 6061 alloy construction - Gentle sweep for ergonomic performance - Bar Clamp Diameter: 31.8mm - Rise: 5mm - Weight: 276g
An adventure bar from Ritchey. Extra wide with subtle rise and sweep, these bars are perfect for handling dodgy terrain while packing a week's worth of supplies. - 6061 alloy - Bar Clamp Diameter: 31.8mm - Width: 800mm - Rise: 30mm - Back Sweep: 27 degrees - Upsweep: 27 - Weight: 355g
Crucial for dialing-in fit, Ritchey 2x bars help get your hands in just the right position for the best ride performance on your mountain bike. - Material: double-butted 6061 alloy - Width: 740mm - Backsweep: 9° - Rise: reversible +/- 5mm flat rise - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 276g
The Logic-E Rizer handlebar expands Ritchey's heritage of legendary cycling products into the world of e-bikes and electronic shifting. Suitably strong and sufficiently wide, the Logic-E Rizer offers a shallow rise and a gentle sweep and is made from 6061 alloy. The bar is drilled and has a cable channel on the side and stem clamp area in order to allow internal cable routing for STEPS or MTN Di2 system. Used in conjunction with the Ritchey LOGIC-E headset, the Logic-E Rizer completes a clean internal routing solution. - Material: double-butted 6061 alloy - Width: 780mm (cutting not recommended) - Rise: 20mm - Backsweep: 9° - Upsweep: 2° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 325g - Electronic compatibility: Shimano Di2 / STEPS (Shimano EW-SD50 cable – internal routing. Note: For proper assembly stems with open faceplates are required, such as the Ritchey C220 Trail)