Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Other

Steve Potts Steve Potts Cycles Siskiyou Bar
$139.99
Steve Potts has been making the titanium Siskiyou MTB-gravel-travel bar by himself for many years now. This is a high-quality chromoly version made in Japan by Nitto. • Satin nickel finish or Black • Width: 760mm c-c • Backsweep/Grip angle: 30° • Reach of horns: 80mm • Reachback: 72mm • Center: 25.4mm or 31.8mm • Weight: 820g (25.4mm), • 750g (31.8mm)
Jones H-Bar® Cut, Butted Aluminum, 710mm
$119.00
All Jones H-Bars use a 31.8mm stem clamp diameter, 22.2mm clamp size for controls (standard mountain bike style). The entire front loop has a 22.2mm diameter. The Cut H-Bar has the same hand, stem and brake lever position as the Loop H-Bar but with the front cross bar cut out. The cross bar sweeps forward to allow the levers to go behind the cross bar instead of in front. This gives longer uninterrupted hand positions and will allow trigger and grip/twist shifters to fit on the rearward extensions (unlike the original H-Bar and the Cut H-Bar). The continuous front loop of the bar enhances stiffness and is good for additional aero hand positions and mounting lights, GPS devices etc. This bar provides comfort and power with an impressive weight. With the levers in the optimum position the rider is superbly placed for fast riding while still enjoying all the hand positions available. The rearward extensions allow extra leverage and a wider hand position - be it for comfort or power. All H-bars are for a 31.8 stem and the cross tube is now tapered and butted with a 31.8 mm clamp area. The grip tubes on the aluminum version are also butted for strength, and weight savings. - 470 grams
Odyssey 10-4 Bar
$89.99
The 10-4 Bar is the biggest bar Odyssey makes. It uses large radius bends, thicker walled, butted tubing, and a traditional 7/8-inch crossbar for superior strength and durability. These bars have a post-weld heat-treating which is guaranteed against manufacturer’s defects. Features: - 1.8/1.3mm thick, multi-butted main tubing - Butted, traditional 7/8? crossbar for strength - Large radius bends for greater durability - Post-weld heat-treated Specs: - 10-inch rise - 30-inch width - 11-deg backsweep - 4-deg upsweep
FSA Metropolis Handlebar
$75.00 - $80.30
FSA's Metropolis multi-position handlebar features a stylish wing shape for an ergonomic, flip-flop design at home on your commuter, cruiser, or cafe racer. Set it as a high flyer or low rider to suit your personal and riding styles. - Weight: 300g - Width: 620mm - Backsweep: 46.5­° - Lever Compatability: Mountain 22.2mm - Rise: 32mm
Jones H-Bar® Bend Aluminum
$75.00
All Jones H-Bars use a 31.8mm stem clamp diameter, 22.2mm clamp size for controls (standard mountain bike style). All my bars are H-bars. H-bar for Handle-Bar. They have the 45 degrees of sweep, the 0.5" vertical offset, and a multitude of hand-positions. But could I offer more, with less? Yes. Back to basics, back to the beginning, with a twist. Well, with a bend....the Bend H-Bar. The original concept, the 45 degrees of sweep but with the bend, where it is, ensures shifters and levers are a simple fit and the one piece butted aluminium construction delivers a bar 170g lighter than a Loop. Less hand position options, less stuff-mounting space, marginally less stiff but all you might ever need in an H-Bar. No more, no less. The Jones Bend H-Bar. The bikes I ride for long distances or at night have the Loop H-Bars so I have more hand positions and mounting points. The Bend H-Bar is nice for bikes that don't need things attached to the front of the bar (light, GPS, etc.) or an aero position. I am using the Bend H-Bar on my single-track day riding bikes and it's great. Widths - 710mm 355 grams (Best with Jones 205mm Grips)
Surly Open Bar Handlebar
$60.00
Surly's Open Bar Handlebar is the go-to option for a good time. It features lots of space for grips, shifters, brake levers, or any combination of the a fore mentioned. The swept-back angle is comfortable for your wrists, and the stout chromoly construction is durable yet compliant. It's at home on bike paths or neighborhood cruises, and at an ominous 666mm, it's even wide enough to tackle some singletrack.
Soma Hwy One Bar
$49.99
- 6061-T12 aluminum with round, Compact bend and a shallow drop - easy to reach brake lever positioning - Drop: 130mm - Reach: 75mm
Fyxation Rodeo Bullhorn Alloy Bar
$34.95 - $45.95
- Wide center profile for on-the-top spinning and a 205mm forward extension with upswept ends for sprints in the city or on the track - Can be used with track grips, bar-end shifters, or brake levers if needed - 1-piece 6061-T6 aluminum construction
Velo Orange Porteur Handlebar
$35.00 - $42.00
Remember those great Belleri Porteur bars from France? Of course Belleri is long out of business, but those handlebars are still sought-after. So, Velo-Orange decided to make their own Porteur bars. They are 480mm wide; reach is 140mm. The grip area is about 130mm, and they have about 15mm of rise or drop. The clamp area is 25.4mm. The quality and polishing are very nice. The transition from the grip to the curve on the originals was a bit abrupt; The Velo-Orange version has a gentler transition. The curves on both versions are fuller and, we think, prettier than the somewhat similar Champs Elysées bars used on the old Herse bikes. These bars are available in two tubing diameters, 23.8mm road-sized and 22.2mm mountain bike-sized (clamp area is 25.4mm on both): - 22.2mm diameter (MTB-size) bars accept MTB brake levers and clamp-on shifters. They do not work with bar-end shifters. The only inverse levers that work are Dia Compe levers in the 22.2mm size. - 23.8mm diameter (road-size) bars accept standard inverse brake levers, standard bar end shifters, and 23.8mm city brake levers. In short, anything made for road bars fits. They do not accept MTB levers or shifters.
Dimension Trekking Handlebar
$29.99
Traditional trekking bar with butterfly bend provides many options for hand positions, making this bar a comfortable choice for touring and recreational cyclists alike. - Designed for City-Trekking use - Not intended for mountain biking - Bar Clamp Diameter (mm): 25.4 - Color: Black - Lever Compatibility: Mountain 22.2 - Weight: 479g - Width: 585mm
Sim Works Sim Drops Bar End Plug - 22mm
$25.00
If you would like to assemble your bike completely as you desire, you need to feel like making every little part perfect. We, SimWorks, prepare several beautiful handlebars by Nitto brand and at the end of these handlebars, you might want to consider to equip Sim Drops for your safety and your precious sparkling riding time. - SimDrops 22 for 22mm diam. Flat handlebars. - Material : Aluminum - Bar inside : 15.5~17m
Dimension Arc Bar Handlebar
$19.99
A great bar for your fixie, single speed, or cruiser. - Aluminum Arc bar with wide sweep - May come in OEM packaging - Back Sweep (deg): 27 - Material: Aluminum - Rise: 0mm
Dimension Cruiser
$19.99
A wealth of rise and plenty of backsweep make Dimension Cruiser bars great for a comfortable, upright riding position. - AL-6061 aluminum alloy - ISO4210 safety tested for city/trekking use - Not recommended for use with bar-ends or clip-on aero bars - 50-degree sweep
Dimension Urban Cruiser Handlebar
$19.99
Dimension's Urban Cruiser Bar is a great way to customize your ride. Available in a variety of configurations to suit your needs and style. - Material: Aluminum - Lever Compatability: Mountain 22.2mm
Wolf Tooth Components Alloy Bar End Plugs - Black
$19.95
The Wolf Tooth Alloy Bar End Plugs feature a machined 6061-T6 aluminum end cap, a bolt, and an expandable plastic nut to create a lightweight, secure bar end plug option. Plugs are available in multiple color options that match existing anodized Wolf Tooth components. - Compatible with both drop bars and MTB bars
Wald 815 Handlebar
$14.98
With multiple geometry options to choose from, Wald's Steel Handlebars offer great options for riders looking to accessorize their bike or find a replacement option that feels comfortable. - Chrome finish - Made in the USA - Weight: 372g - Lever Compatability: Mountain 22.2mm
Problem Solvers Handlebar Shim - 25.4 to 31.8mm, 60mm length, Black
$12.99
The Problem Solvers Handlebar Clamp Shim adds thickness to a smaller diameter handlebar so it can be used with a larger diameter clamping stem. - Aluminum SPECIFICATIONS - Bar Clamp Diameter (mm): 25.4
Wald 8095 Touring Handlebar
$12.99
This classic touring handlebar is great for bicycle restorations or for adding a touch of traditional class to any bike - 1"(25.4mm) clamp, 2.5" rise, 23.75" wide - Handmade in Maysville, Kentucky
Page 1 of 1