Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Riser

$130.00
We partnered with the legendary folks over at S&M Bikes to create a more stylish and affordable Made in the USA crossbar handlebar. This one is an absolute dream come true as we've been huge fans of S&M, and their American Made ethos, ever since our formative years spent prowling the local streets on a BMX bike. Partnering with them is a real honor. These are perfect for your cruiser, MTB, or country bike. They offer a heads up riding position and plenty of leverage for control. The finish is a powder coat in Transparent Gold, Transparent Black, or Clear. They look rad and show off the heat marks from the fabrication process. As clear coats are porous your bars will patina underneath the powder coat. Be aware. "Made in USA" and "Wilde Bicycle Co." are stamped into the steel, but the Wilde logo is just a decal on top of the clear coat that you'll apply yourself. The clamp diameter is 22.2 so you will need shims if you're planning on using a 25.4, 26.0 or 31.8 clamp stem. We recommend utilizing a stem with at least four bolts in the faceplate, you can generate a lot of leverage with these and anything less risks the bars rotating. Specs - 73mm or 2.87" Rise - 15° Back Sweep - 7 ° Up Sweep - 830mm Wide - can be trimmed as low as 730mm - 22mm Clamp - Weight: 793 Grams - 100% Chromoly steel - Handmade in California
$235.00
Our Milhouse Handlebar has the distinction of being the first and only of its kind: A full carbon moto-inspired riser bar. Featuring a 16-degree backsweep and 8-degree upsweep for comfort and control, it's tested and approved for getting rad on the roughest terrain. A statement piece for custom builders and upgraders alike, the Milhouse is equally at home on klunkers, bikepacking rigs, singletrack steeds, or simply cruising the streets with style. Trimmable ends marked with easy-to-read graphics allow you to dial in your fit for maximum confidence wherever the trail takes you. - Unidirectional carbon fiber construction - Trimmable ends, made easy with graphic markings - No rider weight limit - ASTM Condition 3 – For rough off-road riding and jumps less than 24" - 90mm clamping area to fit Salsa Anything Cradle - 31.8mm clamp, 70mm rise, 16-degree backsweep, 8-degree upsweep - 825mm wide - Weight: 288g
$158.00
Whisky's No.9 Riser Bar features a 25mm rise and a 5-degree upsweep to offer a slightly more upright riding position that increases control and comfort. It’s wide, sleek, and tested to the highest standards to deliver a ride you can trust mile after mile. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.
$165.00
The No.9 35.0 Mountain Carbon Handlebar is designed and built for the most extreme trail and all-mountain riding. The oversized stem clamp adds to front-end stiffness for precise input, while the carbon construction provides vibration damping in a lightweight and durable package. - Unidirectional carbon fiber construction - 35mm stem clamp - 8 degrees of backsweep with 5 degrees of upsweep - Trimmable ends, made easy with graphic markings - Rated to ASTM Condition 4 for extreme off-road riding
$14.98
With multiple geometry options to choose from, Wald's Steel Handlebars offer great options for riders looking to accessorize their bike or find a replacement option that feels comfortable. - Chrome finish - Made in the USA - Weight: 372g - Lever Compatability: Mountain 22.2mm
$75.00
In today’s fast-paced world of riseless flat bars and far-too-aggressive-for-our-liking cockpits, Surly harkens back to simpler times. They wanted a handlebar that would suffice for a relaxed cruise to a favorite windowless bar, but would also be suitable should a person decide to take the long way home. The Sunrise Bar is a cruiser bar, a trail bar, and a BMX bar all rolled into one. It has a 22.2mm clamp diameter, but Surly included some Problem Solvers shims so you can mount it up to your fancy 31.8mm stem. Material: CroMoly steel Clamp diameter: 22.2mm; Includes shims for 31.8mm clamp Width: 820mm; Can be cut to 720mm Rise: 83mm Sweep Angle: 14.7 degree backsweep, 6.7 degree upsweep Weight: 778g including shims Color: Black
$80.00
The Terminal Bar blends cruiser-style comfort with off-road touring performance. Able to run with a 40mm drop or rise, its swept-back design makes it great for long rides on rough, technical terrain. - 22.2mm diameter grip area; good to go for MTB shifters, brake levers, and grips - 34 degree backsweep with a 40mm + / - rise
$52.99
- Handlebar optimized for 19mm diameter bar ends - Exclusively fits smaller grips for optimal ergonomics. - 650mm Bar - Offers ample width for increased bar control. - 6061 Sand Blasted Aluminum - Requires 22.2 Shim Kit (170915-01) - Rise: 20mm - Handlebar Width: 650mm - Stem Clamp Diameter: 31.8mm - Handlebar Material: Aluminum - Handlebar Weight: 260g
$149.00
These Handlebars may look unconventional but the bottom line is that they flat out provide better handling and more comfort than a traditional bar. A wide range of better hand and body positions ensure more power, comfort and control. 45 degrees of sweep puts your wrists in a natural and relaxed position for lasting comfort. The Jones H-Bars are the perfect upgrade for a bikepacking, touring, mountain, road, gravel, commuting, city, or just about any other type of bike! They're also a great replacement for drop bars with more hand positions, comfort, control, and provide more bag and light mounting locations! The front loop of the bar provides several hand positions and mounting locations for bike computers, lights, GPS devices, sports action cameras and the Jones Gnarwal. This bar provides comfort and power with an impressive weight. The long grip area paired with Jones long Grips provide a wide range of hand and body positions, from fully upright at the ends of the grips, to a tucked aero position when resting your forearms across the crossbar and front loop. In between these extremes, there are many unique and useful positions, making this a true multi-position bar because you'll actually find yourself using all of the positions! The most rearward hand position allows for extra leverage and a wider hand placement - be it for comfort or power. Jeff has heard from a lot of riders who need to get their bars higher in order to get more comfort and control, and while Jeff’s framesets and bikes make this easy, many riders are installing H-Bars on other brands of bikes with a normal, lower stack height with a lower overall intended bar height. For them, and everyone else who wants to get their bars higher, we have the Butted 2.5 Aluminum Loop H-Bar! Think of the 2.5” as an alternative to a 2" stack of headset spacers combined with a standard .5”/13mm rise H-Bar. This H-Bar is essentially a butted loop H-Bar with 2.5" of rise compared to the standard .5" of rise on all of the other H-Bars which makes it ideal for bikes with front ends that are too low. Do you have a bike with a short head tube? Your back and neck want this bar! Are you wondering if it's safe to install a steerer tube extender on a steerer tube? Get this H-Bar and you won't need to find out. Having this higher handlebar with more hand positions will make you much more comfortable. Also a great bar on a Jones Bike for the rider who wants maximum handlebar height! Jones aluminum H-Bars come in two tubing types; butted or straight gauge (SG). Our butted H-bars are double butted meaning the tubing has two different thicknesses, thicker at the joints for strength and thinner elsewhere to reduce weight. Straight gauge tubing is the same thickness throughout which reduces cost but increases weight. The Jones Butted 2.5 Aluminum Loop H-Bar shares the same comfortable 45 degree sweep, black or silver color options, 660mm or 710mm widths, 31.8mm clamp diameter, and standard 22.2mm grip area diameter for flat bar/mountain bike controls as with the rest of the H-Bars. The entire front loop has a 22.2mm diameter. We get a lot of questions about whether this H-Bar will work with the Loophole H-Bar Pack and H-Bar pack, and the answer is yes! The pack fits less tightly, and will be tilted on this H-Bar, but from our experience, it works just fine. The Jones Butted 2.5 Aluminum Loop H-Bar weighs approximately 525 grams, and is about 165 grams lighter than the SG 2.5 Aluminum Loop H-Bar 710mm, making the bar a great way to keep weight down and have great comfort and handling. Colors: Black is bead-blasted and black anodized for a shiny, lightly-textured finish. Silver is bead-blasted and clear anodized for a shiny, but not polished, lightly-textured finish. Testing: All Jones H-Bars pass and exceed the same stringent mountain bike testing standards. Refer to the H-Bar Manual for set-up tips! We highly recommend checking out our selection of longer grips and bar tape specifically designed for the 710mm and 660mm H-Bars. Using longer grips is KEY to getting the full range of positions, and therefore comfort, that the H-Bars are capable of delivering! Great for: Mountain Bikes, Singlespeeds, 29ers, Fat Bikes, Touring, Bikepacking Adventures, Gravel Bikes, Road Bikes, City Riding, E-Bikes and more! Compatible with: Singlespeeds, Trigger shifters, Gripshift, Shimano twist shifters, Rohloff and above the bar hinged thumb-shifters.
$85.00 - $93.00
All Jones H-Bars use a 31.8mm stem clamp diameter, 22.2mm clamp size for controls (standard mountain bike style). All my bars are H-bars. H-bar for Handle-Bar. They have the 45 degrees of sweep, the 0.5" vertical offset, and a multitude of hand-positions. But could I offer more, with less? Yes. Back to basics, back to the beginning, with a twist. Well, with a bend....the Bend H-Bar. The original concept, the 45 degrees of sweep but with the bend, where it is, ensures shifters and levers are a simple fit and the one piece butted aluminium construction delivers a bar 170g lighter than a Loop. Less hand position options, less stuff-mounting space, marginally less stiff but all you might ever need in an H-Bar. No more, no less. The Jones Bend H-Bar. The bikes I ride for long distances or at night have the Loop H-Bars so I have more hand positions and mounting points. The Bend H-Bar is nice for bikes that don't need things attached to the front of the bar (light, GPS, etc.) or an aero position. I am using the Bend H-Bar on my single-track day riding bikes and it's great. Widths - 710mm 355 grams (Best with Jones 205mm Grips)
$170.00
The Jemmy Bar was designed with a few goals in mind: First, we wanted a flat bar geared more toward everyday riding than the Oyster Bar, that didn't sacrifice too much control. Second, we wanted plenty of room between the stem and outer grip section of the bar for straps, accessories, alternate hand positions, you name it. Finally we wanted it to look & feel at home on most ATB's of the 80's and 90's (we recommend a shorter, sub 90mm stem if this is your bike) as well as modern tourers designed around shorter stems and wider bars. With that in mind, the Jemmy Bar was born. It's been tested on everything from Karla & Daniel's touring bikes to our own commuters here in the PNW - If you want a truly versatile bar that is equally at home on a fat tired town bike as it is a modern tourer, This one's for you! The Jemmy bar is: - Full 4130 steel tubing, 22.2mm stem clamp diameter (add shims here if needed). - 850mm wide (uncut), 27 degrees of backsweep, 35mm rise, and 6 degrees of upsweep. - 595g, uncut - Able to be cut to about 740mm while retaining a 185mm grip area. - Made by us in Port Townsend, WA and powder coated by our friends at Stunt Doubles Color. - Not for 'downhill' use. Jumps and bumps under 2 ft. are one thing, rocketing down a mountain another.
$190.00
Simply put, it's the perfect trail bar. The M6 bar is tuned for the dream combination of response, compliance, and high strength. Available in a traditional 25mm rise or a low 7.5mm rise, it sweeps back at 9 degrees and up 5 degrees, providing excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain. - Material: Carbon Fiber - Weight: 200g (25mm rise); 190g (7mm rise) - Bar Width (Max): 780mm - Bar Width (Min): 740mm - Clamp Diameter: 31.8mm - Sweep: 9 Degrees - Tip: 5 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm
$190.00
Occupying a class all its own, our Winston Handlebar is a performance carbon mustache bar loaded with versatility and flare. Featuring a 25mm rise and 73-degree backsweep, it offers compatibility with road, mountain, and bar-end controls. Pretty enough to punch up commuter rigs and sport touring bikes alike, it's built tough to handle everything from rough, off-road conditions to long rides in the country. Comfortable in both the drop and riser positions, the unique and multi-functional Winston is sure to inspire upgrades and eye-catching custom builds. - Compatible with road, mountain, and bar-end controls - Tested to ASTM 3 - 90mm clamping area to fit Salsa Anything Cradle - Can be ridden in up or down position - Unidirectional carbon fiber construction - Weight: 250g
$24.99 - $32.99
This mid-rise handlebar provides smooth lines and pure comfort - Black powder coat - 1"(25.4mm) clamp, 5.25" rise, 27" wide - Handmade in Maysville, Kentucky
$28.99
With multiple geometry options to choose from, Wald's Steel Handlebars offer great options for riders looking to accessorize their bike or find a replacement option that feels comfortable. - Chrome finish - Made in the USA - Weight: 726g - Lever Compatibility: Mountain 22.2mm
$75.00
The Atmos 7k aluminum riser bar series feature a 9° backsweep and 760mm width that is trimmable by 30mm at each end for a possible width of 700mm. The bar is available in 3 rise variants: 0mm, 10mm and 20mm. Made from tough 7050 Lightweight aluminum, the bar weighs just 250g at full width. - 760mm wide - Wide to start and trimmable by 30mm each side - Made from tough 7050 lightweight aluminum SPECIFICATIONS - Type: Riser - Application: XC - Clamp Diameter: 31.8mm - Width: 760mm - Backsweep (degrees): 9
$99.99
TruVativ is proud to announce the TRUVATIV CoLab Series, a collection of bars specifically engineered to match the demands of each signature athlete's discipline and riding style — and to enhance each rider's cockpit interface. - Upsweep: 5° - Backsweep: 9° (760mm bars) - Backsweep: 7° (all other bars)
$194.00
On the big days, it's the small comforts that make the ride better, longer. That's why we re-engineered our carbon riser bars to improve feel, flex and rider positioning and reduce trail buzz. These bars are stiff, precise and forgiving. With a re-tuned carbon laminate, your shoulders, arms and hands keep fresh all day. - Available in 760mm carbon with 20mm rise - 35mm clamp - Super-wide to start and trimmable by 40mm (20mm each side) - Specialty tuned carbon laminate to absorb noise while maintaining stiffness SPECIFICATIONS - Type: Riser - Clamp Diameter: 35.0mm - Width: 760mm - Rise: 20mm - Backsweep (degrees): 7
$75.00
You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Stiff, precise, and super-wide - Made with tough 7050 alloy - Descendent geometry from TruVativ's best enduro rider’s input - Backsweep: 9° - Upsweep: 5°
$194.00
RIP, NO RATTLE. Arm fatigue is real. The solution? More muscle. Or, our new carbon laminate, made to tackle the trail buzz, not transfer it. We re-engineered our bars to improve rider position (adding 5mm rise) and reduce the chatter transferred to the hands and arms. These bars offer the right bit of flex while keeping things stiff, precise, and responsive. Features: - Super-wide to start and trimmable by 40mm (20mm each side) - Specialty tuned carbon laminate to absorb noise while maintaining stiffness Specifications: - Clamp Diameter: 35.0mm - Width: 800mm - Material (HB): Carbon - Rise (HB): 25mm - Type (bar): Riser - Backsweep (degrees): 9 - Upsweep (degree): 5
$75.00
Combine a proven shape, proven width, proven materials, and a take-no-prisoners approach, and you’ve got the 7050 Descendant riser bar. It’s stiff, tough, dependable, and gives you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Stiff, precise, and super-wide - Made with tough 7050 alloy - Descendant geometry from TruVativ's best enduro rider’s input - Backsweep: 7° - Upsweep: 5°
$200.00
Proven shape, proven width, proven materials, and the artistic touch of Troy Lee Designs: voilà, the TRUVATIV CoLab TLD Carbon riser bars. These bars are stiff, tough, dependable, and give you all the comfort and positive steering feel you want. This is art on your bars for artistry in the corners. - Stiff, precise, and width-optimized for enduro, trail and aggressive xc - Carbon fiber perfection - DESCENDANT geometry from their best enduro rider’s input - Signature Troy Lee Designs style
$75.00
You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Material: Al-7050 - Width: 800mm - Backsweep: 9-degrees - Rise: 25mm - Upsweep: 5-degrees - Colors: Black
$194.00
It's Stiff, Not A Stiff. It's the little things that matter most. That's why we scrutinized our carbon riser bars, tasking our pros and engineers to make great even better. The result? We added 5mm to the rise of our widest bar; and fine-tuned the carbon laminate. This translates to an improved riding position, more feel and flex, and less arm fatigue making your time on the trail more smiles, less chatter. Features: - Super-wide to start and trimmable by 40mm (20mm each side) - Specialty tuned carbon laminate to absorb noise while maintaining stiffness Specifications: - Clamp Diameter: 31.8mm - Width: 760mm, 800mm - Material (HB): Carbon - Rise (HB: 25mm - Type (bar): Riser - Upsweep (degree): 5
$70.00
Combine a proven shape, proven width, proven materials and a take-no-prisoners approach, and you’ve got the new Carbon 7050 Descendant riser bars. They are stiff, tough, dependable, and give you all the comfort and positive steering feel you could want. Descendant series bars are the new normal for comfort and control. - Material: Al-7050 - Width: 760mm - Backsweep: 7-degrees - Rise: 20mm - Upsweep: 5-degrees - Colors: Black
$100.00
Truvativ design built in collaboration with, and featuring the creativity of, Troy Lee Designs. The Truvativ CoLab TLD bar is the command center of cornering with an artistic flair. - Includes Rockshox sticker pack to give fork and handlebar a unified custom look - Stiff, precise and wide - Signature Troy Lee Designs style - Geometry and 7050 aluminum are designed for DH and gravity events - Back Sweep (deg): 9 - Upsweep: 5 - Weight: 349g - Material: Aluminum
$33.00
TruVativ's tough Hussefelt Comp Riserbar is made from butted aluminum for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.
$50.00
TruVativ's super-tough Hussefelt Riserbar is made from triple-butted AL-66 for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.
$123.95
Wide, smart and strong, Thomson's Aluminum Handlebars love ripping trails as much as you. With a low rise and proper sweep, you get plenty of stability and control on even the sketchiest terrain. They're made of tough 7050 aluminum and hydraulically press formed for consistent thickness and tolerance, especially in tapered sections of the bar, which means you get exceptional quality and strength. With a 90mm middle section on the downhill bars, using a wide-set, direct-mount stem is no problem. On top of all that, these lightweight bars have the beautiful, subtle, all-black Thomson look.
$134.95
Thomson MTB Aluminum Handlebar 800mm 35mm Rise 9degree back 5 degree up 35.0 clamp. - Produced from 7050 alloy then butted and tapered for optimal fatigue life - Produced with an advanced hydraulic forming press to ensure consistent wall thickness and exact tolerances - Bar Clamp Diameter: 35.0mm
$201.95
Thomson's Carbon MTB bars are made with three different fiber types for strength, durability and long times in the saddle. Thomson's MTB Carbon Cross Country Handlebar is a flat bar with an off center clamp area allowing a flat riding position and reversible for a 5mm drop. It also has 8° of backsweep for comfort and 730mm in width for plenty of leverage. The bars are made with three different fiber types with different tensile strength and tensile modulus, including high strength carbon fibers. This helps to allocate stiffness and flex where needed. The bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders. All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibers from shortening the bar or impact with the ground. With a light weight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+. Friction Paste recommended for installation
$201.95
Thomson's Carbon MTB bars are made with three different fiber types for strength, durability and long times in the saddle. The MTB Carbon Trail Handlebar is built for strength with enough flex built in for all day comfort. It’s strong enough for all mountain/trail riding and light enough for racing. The bars are made with three different fiber types with different tensile strength and tensile modulus, including high strength carbon fibers. This helps to allocate stiffness and flex where needed. The bars are molded with an EPS mandrel inside to avoid wrinkles inside the layup during molding. Most other bars are molded over inflated nylon bladders. All carbon fiber material is produced by Toray and uses tailor made nano Epoxy Resin for very high impact resistance. Toray is the main supplier of carbon fiber to Boeing and Airbus. 1.5K woven impact ends help prevent damage to unidirectional fibers from shortening the bar or impact with the ground. With a light weight and precision tolerance clamp sections, it’s the best bar for your Thomson X4 stem. It’s also certified to EN, tested to DIN+. Friction Paste recommended for installation
$389.95
Upgrade the front end of your favorite ride with Thomson's MTB Titanium Handlebars. Besides being light, stiff, corrosion-proof and incredibly durable, titanium damps vibrations for comfort making easy work of rough and challenging terrain. Install these sweet bars on your daily ride, race rig or trail-crusher and enjoy them for years to come.
$123.95
Thomson's Trail bar is 750mm wide with 20mm of rise. The clamping area is 50mm wide, allowing a different bend profile for a more compliant ride. The Trail bar is designed to give you a lightweight aluminum all-around bar no matter your riding style. - Backsweep: 8° - Upsweep: 5° - Material: Aluminum
$79.99
Developed to offer the same feel and shape as our T1 Carbon handlebars at a sweeter price. 5° Upsweep and 7° Back sweep offers stable comfort for all types of riding. - Available in 20, 30 & 40mm rises - All our aluminum bars are 800m wide
$159.99
Developed with our Oval Tech construction the T1 Carbon Handlebars are ready for any trail. 5° Upsweep and 7° Back sweep offers stable comfort for all types of riding. Available in 10, 20, 30 & 40mm rises all our carbon bars are 800m wide.
$69.99
Based on team rider feedback, Sunday introduces the new Nightshift Handlebars. - Laboratory tested and team proven - 4130 chromoly with post-weld heat-treatment - Large radius bends for greater durability - Traditional 7/8" crossbar for strength - 1.8/1.3 thick multi-butted main tubing - ED coating for anti-corrosion protection
$114.99
- Completely redesigned geometry 780mm wide for the aggressive Trail or All Mountain rider. - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm - Key Technologies: Vibrocore, Dual XGT, CNC Bending, MGR - Material: Zirconium Doped 7-Series Alloy - Weight (g): ±270g (15) / ±275g (25) - Diameter (mm): 31,8 - Rise (mm): 15 / 25 - Length (mm): 780 - Geometry (deg°): 5° up x 7° back - Finish: Shot peen anodized, decal logos
$129.99
- DH and Freeride, ultra-wide, 820mm wide handlebar - Big and burly 35mm barclamp with increased strength and stiffness compared to conventional 35mm alloy bars - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Shot-peening and anodizing enhances fatigue life even further - Weight optimized and adjustable to 760mm Features: - Key Technologies: Vibrocore, Dual XGT, CNC Bending, MGR, Big-Taper (105mm) design - Material: Zirconium Doped 7-Series Alloy - Weight: ±300g - Diameter: 35mm - Rise: 25mm - Length: 820mm - Geometry: 5° up x 8° back - Finish: Shot peen anodized, decal logos
$89.99
World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more. - Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy - Material: MGR Super Six Alloy - Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm) - Diameter: 31.8mm - Rise: 5mm / 15mm / 30mm / 50mm - Length: 800mm (Adjustable to 740mm) - Geometry: 4° up x 8° back - Finish: Shotpeen anodized, decal logos
$114.99
- DH Race tuned award-winning alloy handlebar design, developed with World Cup professionals - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Increased strength and stiffness compared to conventional alloy bars - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm Features - Key Technologies: Vibrocore, Dual XGT, CNC Bending, Impact Ends, MGR Super 6 Alloy - Material: MGR Super 6 Alloy - Weight: ±340g (15mm) / ± 350g (30mm) / ±360g (50mm) - Sweep: 4° up x 8° back - Finish: Shot peen anodized, decal logos
$114.99
- DH race-tuned award-winning alloy handlebar design, developed with World Cup professionals - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Increased strength and stiffness compared to conventional alloy bars - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm
$79.99
A Spank-quality 35mm handlebar that won't cost you an arm and leg? Freeride-inspired all-mountain geometry makes the bar extremely versatile, and the Spoon 35 is rock-solid whether you live for trails or bike parks. 800mm wide, you can dial your fit as the Spoon 35 is adjustable to 740mm. - Cost-effective upgrade to your cockpit without sacrificing quality - Shot-peening and anodizing enhances fatigue life - Length: 800mm - Dial your fit—adjustable to 740mm - Choose 25/40 - 35mm clamp diameter - 5° up x 8° backsweep - Recommended for: ASTM 5, All mountain, trail, free ride, E-Bike
$69.99
Rock-solid in the park or on the trail, the Spank Spoon 800 handlebar gets a refresh for 2020. With new, fresh graphics, the Spoon bar is now 800mm wide for ultimate control. In addition, you can dial in your fit with the ability to cut it down to 740mm for a wide variety of uses. Spank Spoon: the best-priced handlebar on the market without compromise! - Cost-effective upgrade to your 31.8mm cockpit without sacrificing quality - Freeride inspired all-mountain geometry makes the bar extremely versatile - Shot-peening and anodizing enhances fatigue life - Dial your fit—adjustable to 740mm - Recommended for: ASTM 5, All mountain, trail, free ride, DH, E-Bike
$41.99
- Freeride inspired all mountain suitable geometry makes the bar extremely versatile - Rock solid in the park or on the trail - Cost effective upgrade to your cockpit without sacrificing quality - Shot-peening and anodizing enhances fatigue life even further - Material: Alloy - Weight (g): ±395 (25mm) / ±400 (40mm) / ±420 (60mm) - Diameter (mm): 31.8 - Rise (mm):25 / 40 / 60 - Length (mm): 785 - Geometry (Degree): 5°up x 8°back (25mm) / 5°up x 9°back (40mm) / 4°up x 10°back (60mm) - Finish: Shotpeen anodized, laser logos
$89.99
- Unique multi-use bar with excellent ergonomics - Shot peened 6061 aluminium - 2" forward bend from clamp area negates the need to change stems to make up for the grip area sweep. - 1.5" rise for ideal positioning - Bars can be flipped for another take on moustache bars
$79.99
- 6061-T6 polished aluminum handlebar, similar to Torrington North Road - Compatible with MTB-style levers and grips - Clamp diameter: 25.4mm - Width: 21.3" (540mm) - Rise: 2.0" (51mm)
$145.00
Mountain bike terrain is bigger and burlier than ever, so why shouldn’t your components be? Our Guide 35.0 Carbon handlebar increases front-end strength and stiffness for more precise handling inputs. The carbon fiber construction keeps weight to a minimum and soaks up trail chatter. Pair these carbon mountain bike handlebars with our Guide Trail 35.0 Stem and carve, drop, pump, and jump your way down the mountain with confidence. - Bar Clamp Diameter: 35.0mm - Color: Carbon - Width: 760/800mm - Rise: 10/20/40mm - Back Sweep (deg): 8 degree - Upsweep: 5 degree - Material: Carbon
$140.00
Whatever your adventure, Rustler handlebars are tough, durable, and comfortable. Whether you are out exploring a new trail or devouring your favorite descent, they’ll help keep you in control and ready for the terrain ahead. - Signature 11° back sweep, 6° up sweep, 20mm rise - 800mm and 750mm width options - Graduated lines for easy trimming - 31.8mm clamp diameter with 160mm width for use with Salsa Anything Cradle and aerobars - Weight: 221g - Note: Rustler bars are not compatible with bar ends
$75.00
Whatever your adventure, Rustler handlebars are tough, durable, and comfortable. Whether you are out exploring a new trail or devouring your favorite descent, they’ll help keep you in control and ready for the terrain ahead. - Lightweight and strong 7050-T6 series aluminum alloy construction - Signature 11° back sweep, 6° up sweep, 20mm rise - 800mm and 750mm width options - Graduated lines for easy trimming - 31.8mm clamp diameter with 93mm width for use with Salsa Anything Cradle and aerobars - Weight: 330g - Note: Rustler bars are not compatible with bar ends
$40.00
Whatever your adventure, Rustler handlebars are tough, durable, and comfortable. Whether you are out exploring a new trail or devouring your favorite descent, they’ll help keep you in control and ready for the terrain ahead. - Lightweight and strong 6061-T6 aluminum alloy construction - Signature 11° back sweep, 6° up sweep, 20mm rise - 800mm and 750mm width options - Graduated lines for easy trimming - 31.8mm clamp diameter with 93mm width for use with Salsa Anything Cradle and aerobars - Weight: 374g - Note: Rustler bars are not compatible with bar ends
$135.00
Whatever your adventure, Salsa's Salt Flat Handlebars are lightweight, comfortable, and durable. Whether you are racing, riding laps at your local track, or exploring new trail for the first time, grab hold and let’r rip! - Signature 11° back sweep, 6° up sweep, zero rise - 800mm and 750mm width options - Graduated ends for easy trimming - 31.8mm clamp diameter with 100mm width for use with Salsa Anything Cradle and aerobars - Weight: 189g - Note: Salt Flat bars are not compatible with bar ends
$339.99
Fast, Light, and Agile. SQlab ergonomics experts are not only quite impressive in just ergonomics, but also very well versed in high-tech, material science and carbon manufacturing. Ergonomics: With an aggressive sitting position and a handlebar width from 740mm and under 9° backsweep, the wrists are always overstretched. SQlab currently has the monopoly for aggressive MTB handlebars. Damping: The 311 FL-X has been developed with regard to flex behavior. In an elaborate study, we were able to prove that almost all high-quality handlebars have damping characteristics between 0% and 15%, depending on the intensity. The 311 FL-X is between 20% and 30%. The higher flex has no disadvantages in steering precision. The steering forces are clearly below the vertical forces. Stability: SQlab is one of only two manufacturers to remain in the big bike magazine break test without damage. - Weight: At 200g, the handlebar is one of the lightest and most stable on the market. - Area of use: MTB Race - The 12° backsweep with its short reach provides a natural transition from the lower arm to the hand when in a more upright riding position thus protecting the wrist from the extreme strain - The 15mm or 30mm Rise (handlebar height) allows an individual adjustment of the sitting position. - This bar utilizes a 31.8mm clamping area. If you have a 35mm stem, please refer to our shim kit.
$134.99
The perfect combination of form, wall thickness and diameter, with the corresponding anatomically-optimized bend for various riding dynamics, make the SQlab 3OX handlebar series the most stable, as well as the lightest, bar in its field. SQlab's handlebars feature an ergonomic design that ensures the wrist is not overstretched, the carpal tunnel is not constricted and the supply to the hands is improved. The risk of sleepy and numb fingers is minimized and discomfort in index and middle fingers is reduced. The 12° backsweep, with its short reach, provides a natural transition from the lower arm to the hand when in a more upright riding position, thus protecting the wrist from the extreme strain of downhill riding. The 4° upsweep brings the elbows into a perfect position for a dynamic riding style. - Use: MTB, Gravity & E-Performance - 15mm, 30mm or 45mm rise options allow individualized positions - 31.8 clamp diameter
$319.99
The perfect combination of form, wall thickness and diameter, with the corresponding anatomically-optimized bend for various riding dynamics, make the SQlab 3OX handlebar series the most stable as well as the lightest bar in its field. SQlab's handlebars feature an ergonomic design that ensures the wrist is not overstretched, the carpal tunnel is not constricted and the supply to the hands is improved. The risk of sleepy and numb fingers is minimized and discomfort in index and middle fingers is reduced. The 12° backsweep, with its short reach, provides a natural transition from the lower arm to the hand when in a more upright riding position, thus protecting the wrist from the extreme strain of downhill riding. The 4° upsweep brings the elbows into a perfect position for a dynamic riding style. - Use: MTB, Gravity & E-Performance - 15mm, 30mm or 45mm rise options allow individualized positions - 31.8 clamp diameter
$134.99
The perfect combination of form, wall thickness and diameter with the corresponding anatomically-optimized bend for various riding dynamics, make the SQlab 3OX handlebar series the most stable as well as the lightest bar in its field. SQlab's handlebars feature an ergonomic design that ensures the wrist is not overstretched, the carpal tunnel is not constricted and the supply to the hands is improved. The risk of sleepy and numb fingers is minimized and discomfort in index and middle fingers is reduced. The 16° backsweep, with its short reach, provides a natural transition from the lower arm to the hand when in a more stretched riding position, while the 4° upsweep brings the elbows into a perfect position for a dynamic riding style. - 15mm, 30mm or 45mm rise allow individualized positions - 31.8 clamp diameter
$319.99
The perfect combination of form, wall thickness and diameter, with the corresponding anatomically-optimized bend for various riding dynamics, make the SQlab 3OX handlebar series the most stable as well as the lightest bar in its field. SQlab's handlebars feature an ergonomic design that ensures the wrist is not overstretched, the carpal tunnel is not constricted and the supply to the hands is improved. The risk of sleepy and numb fingers is minimized and discomfort in index and middle fingers is reduced. The 16° backsweep, with its short reach, provides a natural transition from the lower arm to the hand when in a more stretched riding position and the 4° upsweep brings the elbows into a perfect position for a dynamic riding style. - 15mm, 30mm or 45mm rise allow individualized positions - 31.8 clamp diameter
$339.99
Fast, light, sporty and agile. Who would have thought that the SQlab ergonomics experts are also quite good in high-tech, material science and carbon manufacturing. - Stability: Syntace and SQlab are the only manufacturers to remain in the big bike magazine break test without damage. - Weight: At 200g, the handlebar is one of the lightest and most stable on the market. - Ergonomics: With a sporty sitting position and a handlebar width from 740mm and under 9° backsweep, the wrists are always overstretched. SQlab currently has the monopoly for sporty MTB handlebars. - Damping: The 311 FL-X has been developed with regard to flex behavior. In an elaborate study we were able to prove that almost all high-quality handlebars have damping characteristics between 0% and 15%, depending on the intensity. The 311 FL-X is between 20% and 30%. The higher flex has no disadvantages in steering precision. The steering forces are clearly below the vertical forces. - Area of use: Marathon, Cross Country and Trail bikes with sporty sitting position and under 130mm suspension. The pictured stem is not included in the scope of delivery. The 15mm or 30mm Rise (handlebar height) allows an individual adjustment of the sitting position. - Area of use: MTB race - Width: 740mm - Shortened maximum width: 720mm - Backsweep: 16° - Upsweep: 4° - Material: carbon - Clamping: 31.8mm - Downsweep: 0° - Stretch: 0mm
$54.95
Answering a call from the wild and satisfying the style-conscious among us, the new Classic Kyote is the latest offering from Ritchey for adventure riding and bikepacking. Featuring a super-comfortable 27.5-degree sweep and 35mm rise, the Kyote bar is perfect for skirting ridge lines, cutting trails, and exploring near and far. With a plentiful 800mm width, there's lots of space for bags, lights, and navigation, while the Kyote's rise and sweep offer a natural hand position for comfort and control—even when loaded with gear. Featuring the timeless high-polish silver finish, the Kyote represents Ritchey's deep heritage with handlebar design and a never-ending quest for adventure. Embrace the Kyote, and chase the ultimate adventure experience. - Designed for adventure and bikepacking - Classic high-polish silver finish - 800mm wide for control and plenty of space for bags, lights, etc. - Material: double-butted 6061 alloy - Width: 800mm - Rise: 35mm flat rise - Backsweep: 27.5° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 360g
$41.95
The Ritchey Classic Rizer handlebars are a refined version of its high-performance predecessors featuring a classy high-polish silver finish.
Page 1 of 3 Next page