Headsets

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS52/30/H1 • Bottom Type: IS - Integrated • Bottom Head Tube Inside Dia.: 52.1mm • Crown Race Seat Dia.: 30.015mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 1mm • Bottom Bearing Type: Black Oxide, Sealed • Material: N/A • Weight: 72g

This is the Integrated Bottom Bearing for the Cane Creek 40 Series headset. Please contact us if you have any questions about which parts are correct for your headset.

For bikes with press-fit head tubes, the Ritchey Comp Press Fit headset stands out above all others. The Comp features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. The upper bearing is a sealed cartridge, while the lower bearing is coated in titanium. - Upper Fit (S.H.I.S.): ZS44/28.6 - Upper HT OD/ID: 50/44 - Lower Fit (S.H.I.S.): ZS44/30, ZS55/40, ZS55/40 - Lower HT OD/ID: 50/44, 61/55, 61/55 - Material: CroMo - Top cap: 7.3 or 12.4mm - Upper Bearing: Sealed cartridge - Lower Bearing: Ti coated, sealed cartridge - Weight: 83g (7.3mm), 103g (12.4mm)

High-quality replacement headset bearings are smooth like butter. - Sealed cartridge bearing for long life - Durable steel bearing housing

ABI Headset Bearing for new builds or replacements.

Replacement headset uppers from FSA - Internal HS Upper Orbit-Z - Steerer diameter: 1-1/8" - ZS44/28.6 (36 x 45) - 5.3/13.1mm

Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out. • Technical Description: EC49/40/H12/K • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 49.61mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Polymer • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide • Material: 6061 aluminum • Weight: 76.57g

The Ritchey Logic Threadless headset features a smaller upper bearing to save weight, while the lightweight, precision-machined aluminum cups are deep for solid insertion. - Bearing: Semi cartridge - Material: Steel - Stack Height: 30.2mm

Comp Logic Threadless Headset - Lightweight, precision-machined aluminum cups - Deep cups for solid insertion

Ritchey Comp Threaded Headset.

Works specifically with the Ritchey Switch Stem (part #RC1560-64) to route \ncables, wires, and hydraulic lines from the handlebar through to the bicycle frame.

Cane Creek compatible integrated style bearings fit directly into headtube. - 36-degree inner chamfer and 45-degree outer chamfer - Crown Race: 30 - S.H.I.S. Lower: IS41 - S.H.I.S. Upper: IS41 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless

Designed for bicycles with press-fit headsets, the Classic Press Fit Upper Headset features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. Wrapped in our timeless high-polish finish, the Classic Press Fit Upper headset adds that classy detail your bike deserves. - Top cap: 7.3 - Material: Alloy - Upper Fit (S.H.I.S.): ZS44/28.6 - Upper HT OD/ID: 50/44mm - Bearing: Sealed cartridge - Finish: High-polish silver - Weight: 43g (7.3mm)

The Ritchey Comp Cartridge Press Fit Upper Headset features full complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. - Top cap: 7.3 or 12.4mm - Material: CroMo - Upper Fit (S.H.I.S.): ZS44/28.6 - Upper HT OD/ID: 50/44 - Bearing: Sealed cartridge - Weight: 43g (7.3mm), 51g (12.4mm)

The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Zero stack cups press into the head tube with very little stack height. - Sealed black oxide bearings - Steel crown race with integrated seals - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

The Origin8 Twistr Integrated Headset features highly polished sealed angular contact premium bearings ensure smooth operation. Its CNC-machined AL6061 top cover is sealed to keep moisture and grit away from the bearings, while the CNC-machined AL7075 crown race protects the lower bearings and fork. - AL6061 top cap - Forged stainless steel bolt - Includes star nut

Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our Performance Headset is built to include a black oxide-coated chromium steel bearing and a one-year warranty. Our headsets stand above the rest with three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable. Available in a variety of colors. These EC headsets are for frames with external bearing cups, which places the bearing outside of the frame with these headsets. Lower assembly features: - Custom molded dual-lip seal on the crown race to protect the lower bearing in the toughest conditions. - 12.25mm stack. - Service and additional parts available.

Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our Performance Headset is built to include a black oxide-coated chromium steel bearing and a one-year warranty. Our headsets stand above the rest with three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable. Available in a variety of colors. These EC headsets are for frames with external bearing cups, which places the bearing outside of the frame with these headsets. Lower assembly features: - Custom molded dual-lip seal on the crown race to protect the lower bearing in the toughest conditions. - 12.25mm stack. - Service and additional parts available.

Wolf Tooth headsets are machined in the USA with aircraft-grade 6061 aluminum. Our Performance Headset is built to include a black oxide-coated chromium steel bearing and a one-year warranty. Our headsets stand above the rest with three levels of superior custom sealing to protect bearings from the elements and prolong the life of the headset. They are designed to be lightweight, strong, and durable. Available in a variety of colors. These EC headsets are for frames with external bearing cups, which places the bearing outside of the frame with these headsets. Lower assembly features: - Custom molded dual-lip seal on the crown race to protect the lower bearing in the toughest conditions. - 12.25mm stack. - Service and additional parts available.

Headset bearings for Wolf Tooth headsets. - Replacement bearings

Wolf Tooth headsets are machined here in our Minnesota shop with aircraft-grade 6061 aluminum. They are designed to be lightweight, strong, and durable. Performance Headsets with Enduro black oxide bearings have a one-year warranty. Our headsets have three levels of industry-leading custom sealing to protect bearings from the elements and prolong the life of the headset. Available in a variety of colors. These ZS headsets are for frames with internal bearing cups that are pressed into the frame. Lower assembly features: - Custom-molded dual-lip seal on the crown race protects lower bearing in the toughest conditions. - All components are precision machined in-house at Wolf Tooth from aircraft-grade aluminum to ensure the highest level of quality. - Service and additional parts available.

The lightweight Orbit UF uses a mixture of bearing types, with caged ball bearings in the top race and sealed cartridge angular contact bearings in the bottom race. Upper and lower water seals keep the elements at bay. - Forged and CNC machined 6061/T6 Aluminum cups - Patented alignment tip for increased durability and performance - Upper cup uses double sealed 5/32" ball bearings - Lower cup uses a black seal angular contact bearing - Laser etched aluminum top cap - Weight: 99g - Crown Race: 30 - S.H.I.S. Lower: EC34 - S.H.I.S. Upper: EC34 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless

These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work. - Engineered and manufactured in Portland, Oregon USA - High-quality stainless steel and titanium baseplates available for all standard Chris King headset sizes - Titanium baseplates are available in 1-inch and 1 1/8-inch sizes only - Devolution baseplates are a stainless steel solution that allow King headsets to adapt to a wide variety of steerer tube sizes - King Stainless Steel baseplates are available in undersized and oversized versions for irregular steerer tube sizes - 30.0mm ID/40.5mm OD for post-April 1995 1-1/8" Headsets - 30.0mm ID/44.0mm OD for pre- April 1995 1-1/8" Headsets

These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work. - Engineered and manufactured in Portland, Oregon USA - Devolution baseplates are a stainless steel solution that allow Chris King headsets to adapt to a wide variety of steerer tube sizes - 30.0mm for 1.5 lower bearing and 1 1/8" steerer

Our headset spacers are specifically designed to cleanly match our headset bearing covers and top caps for a smooth and seamless look. They are available in sets and individually. Details: - White Industries spacers are compatible with other headsets but not necessarily other headset spacers due to the smaller outside diameter of our spacers (see specs below) - "Tapered" spacers are designed to go directly above the headset bearing cover - Sets include 1 each of: 2.5mm straight (S2.5), 5mm straight (S5), 10mm straight (S10), 5mm tapered (T5), 10mm tapered (T10) Specs: - Tapered spacers are 31.6mm outside diameter on top and 34.7mm outside diameter on the bottom - All spacers designed to fit a 1-1/8" (28.6mm) fork steerer

ABI Headset Bearing for new builds or replacements.

For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the WCS Drop In Integrated Headset stands above all others. This alloy headset lower features stainless steel angular contact sealed cartridge bearings with a titanium coating for corrosion resistance, and they're packed with Ritchey high-webbing grease. - Material: Alloy - Bearing: Sealed cartridge, Ti-coated - Weight: 28-35g

For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the WCS Drop In Integrated Headset stands above all others. This carbon fiber beauty features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. - Top cap: 8.3mm - Material: Alloy - Upper Fit (S.H.I.S.): IS42/28.6 - Upper Bearing OD: 41.8 - Top Cover OD: 46mm - Bearing: Sealed cartridge, Ti-coated - Weight: 36g

Designed for bicycles with press-fit headsets, the WCS Press Fit Lower Headset features full-complement, stainless steel, angular contact cartridge bearings packed with Ritchey high-webbing grease and corrosion-resistant Ti-coated bearings. - Material: Alloy - Bearing: Sealed cartridge, Ti-coated - Weight: 34-54g