Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Headsets

Whisky Parts Co. Carbon Headset Stack Spacer
$4.50
Whisky Parts Co. Carbon Headset Stack Spacers - Lighter and cooler than alloy - UD full carbon construction - S.H.I.S. Stem Clamp Diameter: 28.6
Chris King Base Plates
$18.00 - $26.00
These baseplates are the foundation that keeps Chris King headsets turning with legendary smoothness. Manufactured from high-quality stainless steel or titanium, Chris King makes replacement baseplates for all standard sizes and a number of ingenious solutions for those that need something a little special to make their headset work. - Engineered and manufactured in Portland, Oregon USA - High-quality stainless steel and titanium baseplates available for all standard Chris King headset sizes - Titanium baseplates are available in 1-inch and 1 1/8-inch sizes only - Devolution baseplates are a stainless steel solution that allow King headsets to adapt to a wide variety of steerer tube sizes - King Stainless Steel baseplates are available in undersized and oversized versions for irregular steerer tube sizes
Chris King Headset Spacer Kit
$40.00
Get some of the most precisely machined spacers on the market. Available in lots of fun colors, Chris King's spacer kits include one each of their 25mm, 12mm, 6mm, and 3mm spacers.
Chris King InSet 7
$165.00 - $170.00
The Inset headset offers Chris King's trademark quality and durability in a low-stack configuration sized for contemporary headtube dimensions. King's legendary, made-in-house bearings still form the centerpiece of the Inset headsets, with precisely machined aluminum cups and headset caps available in all ten classic Chris King colors. The Inset 7 is compatible with tapered 1-1/8 - 1-1/2-inch forks and frames using a 44mm headtube.
Chris King NoThreadSet Headset Sotto Voce (1-1/8-inch)
$149.00 - $154.00
Chris King led the threadless headset revolution with their NoThreadSet. This iconic, incredibly durable piece of equipment embodies the limitless potential found in simple, high-quality design. Equally appropriate on your road or mountain bike, the NoThreadSet has been ridden to World Cup titles on the trail and to victory at the Tour de France. Featuring precision-machined aluminum cups, King's own made-in-house stainless steel bearings, a stainless steel base plate, and all ten Chris King colors, each headset is a statement piece that will likely outlast your bike! The Sotto Voce models feature stealthy, toned down graphics that let you show your Chris King pride in a more subtle manner.
Chris King NoThreadSet Headset Sotto Voce (1-inch)
$145.00 - $150.00
Chris King led the threadless headset revolution with their NoThreadSet. This iconic, incredibly durable piece of equipment embodies the limitless potential found in simple, high-quality design. Equally appropriate on your road or mountain bike, the NoThreadSet has been ridden to World Cup titles on the trail and to victory at the Tour de France. Featuring precision-machined aluminum cups, King's own in-house stainless steel bearings, a stainless steel base plate, and all ten Chris King colors, each headset is a statement piece that will likely outlast your bike! This model fits bikes with a non-tapered 1-inch headtube and threadless steerer tube. The Sotto Voce models feature toned down graphics that let you sport your Chris King style in a more subtle manner.
Cane Creek 10 ZS56 Headset Bottom
$25.50
Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out. • Technical Description: ZS56/40/H4/K • Bottom Type: ZS - ZeroStack • Bottom Head Tube Inside Dia.: 55.95mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Polymer • Bottom Stack Height: 4mm • Bottom Bearing Type: Black Oxide • Material: 6061 aluminum • Weight: 35.35g
Cane Creek 110 IS41 Headset Bottom
$39.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. • Technical Description: IS41/30/H1 • Bottom Type: IS - Integrated • Bottom Head Tube Inside Dia.: 41.1mm • Crown Race Seat Dia.: 30.015mm • Crown Race Type: Aluminum, Dual-Seal • Bottom Stack Height: 1mm • Bottom Bearing Type: Top-quality, sealed stainless steel bearings • Weight: 24.91g
Cane Creek 40 EC44 Conversion Headset Bottom
$43.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: EC44/40/H12/K • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 44.00mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 65g
Cane Creek 40 IS41/IS52 Tapered Headset
$60.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS41/28.6/H9/K|IS52/40/H1 • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 41.1mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Bottom Type: IS - Integrated • Bottom Head Tube Inside Dia.: 52.1mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 1mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 87g
Cane Creek 40 IS42/IS52 Tapered Headset
$60.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS42/28.6/H9/K|IS52/40/H1 • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 42.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Bottom Type: IS - Integrated • Bottom Head Tube Inside Dia.: 52.1mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 1mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 84g
Cane Creek 40 IS44/IS56 Tapered Headset
$74.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS44/28.6/H8/K|ZS56/40/H4/K • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 44.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 8mm • Top Bearing Type: Black Oxide, Sealed • Bottom Type: ZS - ZeroStack • Bottom Head Tube Inside Dia.: 55.95mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 4mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 109g
Cane Creek 40 Series External Cup Headset
$62.00 - $81.00 $62.00 - $90.00 Up to 10% Off
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.
Cane Creek 40 Series ZeroStack Top Cover
$36.00
This is the Top Cover for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.
Cane Creek 40 ZS44/EC44 Tapered Headset
$74.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: ZS44/28.6|EC44/40 • Top Type: ZS - ZeroStack • Top Head Tube Inside Dia.: 44.0mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 8mm • Top Bearing Type: Black Oxide, Sealed • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 44.0mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Steel, Face-Sealed • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum
Cane Creek 40-Series Conversion Headset Bottom Assembly
$42.00
Cane Creek 40 EC Headset Lowers - Compatible with tapered 1-1/8" to 1-1/4" steerer tubes - Bearing Type: Cartridge - Color: Black - Lower Stack Height: 12 mm - Weight: 65 g - Crown Race: 33 - S.H.I.S Lower: EC44
Cane Creek 40-Series Headset
$74.00
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability, and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Compatible with straight steerer 1-1/8" forks - Bearing Type: Cartridge - Color: Black - Defined Color: Black - Weight: 171 g -Upper Stack Height: 8 mm - Lower Stack Height: 12 mm - Crown Race: 30 - S.H.I.S Lower: EC44 - S.H.I.S Upper: ZS44 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless
Cane Creek Crown Race
$9.00 - $13.00
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Durable steel construction
Zipp Stem Top Cap and Bolt
$13.00
Zipp's Stem Top Cap and Bolt are designed to work specifically with Zipp stems. The eight-gram aluminum cap and nine-gram-bolt are the same as those used on bikes built for Zipp-sponsored professional teams. The bolt has a T25 Torx head for ease of adjustment and so you need only one tool for your Zipp cockpit.
Sunlite Sealed Alloy Headset
$20.99
• Aluminum • Semi-sealed mechanism • 1 1/8 inch • S.H.I.S.: EC34/28.6, EC34/30
Sunlite Semi Integrated Threaded
$13.99
- Steel cup semi-integrated design - Threaded semi-integrated design - Fits many Sun cruisers and others - Caged bearing 5/32" x 22A - Cup Diameter: 44mm - Race Diameter: 30mm - Stack Height: 18.2mm
Sunlite Steel 1 1/8-inch Threaded Headset
$9.99
- Steel cups - Steel retainer bearings - Available in chrome or black - S.H.I.S.: EC34/28.6-26tpi|EC34/30 - Steerer Dia: 28.6mm - Cup Dia: 34mm - Race Dia: 30mm - Stack Ht: 40mm Size: 1-1/8"
Sunlite Steel 1 1/8-inch Threadless Headset
$9.99
• Steel • Retainer ball bearings, includes top cap and star nut • 1 1/8 inch • S.H.I.S.: EC34/28.6, EC34/30
Sunlite Steel 1-inch Threaded Headset
$6.99 - $14.99
- Steel cups - Steel retainer bearings - Available in chrome or black - Steerer Dia: 25.4mm - Cup Dia: 30mm
Sunlite Steel 1-inch–21.1mm Threaded Headset
$6.99
- Steel cups - Steel retainer bearings - Available in chrome or black - S.H.I.S.: EC32/25.4-24tpi|EC32/27 - Steerer Dia: 25.4mm - Cup Dia: 32.5mm
Sunday Headset
$19.99
The Sunday BMX headset is a quality headset at an affordable price: period. It offers one of the lower stack heights on the market and uses a Campagnolo standard spec for 1-1/8-inch integrated headsets. - 45º tapered bearings with 41.8mm outer diameter to fit 42mm BMX head tubes - Compatible with Odyssey GTX Gyro, GTX-R, GTX-S and Snafu Mobeus. - Comes with matching 3mm and 5mm spacers - Weight with/without spacers: 2.1/2.3 oz.
Straitline SC Headset Spacer Kits
$32.60
- Precision CNC-machined and color-anodized with laser-etched graphics - 1-1/8" kits include: (1ea) 3mm, 6mm, 12mm, and 25mm spacers - 1.5" kits include: (1ea) 3mm, 6mm & (2ea) 12mm spacers
Salsa Cane Creek +3mm 40mm Lower Race Custom for Salsa
$12.00
Custom Cane Creek lower race for Salsa.
SRAM Headset Spacer Set
$20.00
SRAM's Headset Spacer Set gives you what you need for setting handlebars to the correct height for a custom fit. These lightweight 1 1/8-inch headset spacers feature a carbon finish with stylish SRAM logos. You get two 5mm spacers and one 10mm and 15mm one.
RockShox Headset Spacer Set
$20.00
RockShox's Headset Spacer Set is a perfect compliment to your RockShox fork. These lightweight 1 1/8-inch headset spacers feature a carbon finish with stylish RockShox logos. You get two 5mm spacers, one 10mm, and one 15mm.
Ritchey Comp Logic Zero Press-Fit Headset (Tapered)
$29.99
Ritchey's Comp Logic Zero Press-Fit Headset is compatible with bike frames that accept internal headset cups in tapered head tubes. It's a sleek, low-profile headset made with Ritchey's proven angular-contact bearings, special Ritchey grease and steel cups.
Ritchey Comp Press-Fit Headset Lower
$32.95
Full complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. - Sealed cartridge bearings - Material: CroMo - Lower Fit (S.H.I.S.): ZS56/40 - Bearing: Ti coated, sealed Cartidge - Weight: 40-52g
Ritchey Comp Press-Fit Headset Upper
$23.95
Full complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. - Sealed cartridge bearings - Top cap: 7.3 - Material: CroMo - Upper Fit (S.H.I.S.): ZS44/28.6 - Upper HT OD/ID: 50/44 - Bearing: Sealed cartridge - Weight: 43g (7.3mm)
Ritchey Cyclocross Pro Press-Fit Headset (1 1/8 inch)
$59.99
Ritchey's Cyclocross Pro Press-Fit Headset is compatible with head tubes that accept internal headset cups. It's a sleek, low-profile headset with an integrated brake cable hanger that will clean up your cable routing. Made with Ritchey's proven angular-contact bearings, special Ritchey grease and aluminum components, this light, durable headset will steer you to the podium.
Ritchey Cyclocross WCS Press-Fit Headset (1 1/8 inch)
$79.99
Ritchey's Cyclocross Pro Press-Fit Headset is compatible with head tubes that accept internal headset cups. It's a sleek, low-profile headset with an integrated brake cable hanger that will clean up your cable routing. Made with Ritchey's proven angular-contact bearings, special Ritchey grease and aluminum and carbon components, this light, durable headset will steer you to the podium.
Ritchey Headset Crown Race
$7.95
- Traditional and integrated type replacement headset crown races
Ritchey Logic 1-1/8-inch Threaded Headset
$15.95
The Ritchey Logic Threaded Headset is your go-to headset for threaded steerers. Featuring a smaller upper bearing to save weight, the Logic Threaded headset also features lightweight, precision-machined aluminum cups that are deeper for more confident insertion. - Smaller upper bearing to save weight - Lightweight, precision-machined aluminum cups - Deep cups for solid insertion - Material: CrMo/Plastic - Upper Fit (S.H.I.S.): EC34/28.6 - Lower Fit (S.H.I.S.): EC34/30 - Bearing: Ball bearing
Ritchey Logic 1-inch Threaded Headset
$14.85
The Ritchey Logic Threaded Headset is your go-to headset for threaded steerers. Featuring a smaller upper bearing to save weight, the Logic Threaded headset also features lightweight, precision-machined aluminum cups that are deeper for more confident insertion. - Smaller upper bearing to save weight - Lightweight, precision-machined aluminum cups - Deep cups for solid insertion - Material: CrMo/Plastic - Upper Fit (S.H.I.S.): EC34/28.6 - Lower Fit (S.H.I.S.): EC34/30 - Bearing: Ball bearing
Ritchey Logic Comp Threadless Headset
$29.95
The Ritchey Logic Comp threadless headset is constructed of steel and uses replaceable cartridge bearings. • Bearing Type: Cartridge • Color: Black • Crown Race: 30 • Defined Color: Black • Lower Stack Height: 13 mm • S.H.I.S Lower: EC34 • S.H.I.S Upper: EC34 • S.H.I.S. Stem Clamp Diameter: 28.6 • Upper Stack Height: 16.8 mm • Weight: 142 g
Ritchey Logic Threaded Headset
$19.95 - $21.95
1-inch model: • Bearing Type: Cup and Cone • Color: Silver/Black • Crown Race: 26 • Defined Color: Silver • Lower Stack Height: 10.5 mm • S.H.I.S Lower: EC30 • S.H.I.S Upper: EC30 • S.H.I.S. Stem Clamp Diameter: 25.4-24tpi Quill • Upper Stack Height: 26 mm • Weight: 130 g 1-1/8-inch model: • Bearing Type: Cup and Cone • Color: Silver/Black • Crown Race: 30 • Defined Color: Silver • Lower Stack Height: 10.7 mm • S.H.I.S Lower: EC34 • S.H.I.S Upper: EC34 • S.H.I.S. Stem Clamp Diameter: 28.6-26tpi Quill • Upper Stack Height: 26 mm • Weight: 140 g
Ritchey Logic Threadless Headset
$15.95 - $19.95
Ritchey's Logic Headset boasts machined aluminum cups for excellent longevity, light weight and super looks. A smaller upper angular cartridge bearing saves weight while a larger lower angular cartridge bearing boosts strength and durability.
Ritchey Road Comp Drop In Integrated Headset Straight 1-1/8-inch Steerer
$24.95
For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the Comp Drop In Integrated Headset stands above all others. The Comp features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. - Top cap: 8.3 or 15.3mm - Material: Alloy - Upper Fit (S.H.I.S.): IS42/28.6 - Lower Fit (S.H.I.S.): IS42/30 - Upper Bearing OD: 41.8 - Lower Bearing OD: 46/42 - Top Cover OD: 46 - Bearings: Sealed cartridge - Weight: 74g
Ritchey SuperLogic Zero Press Fit Headset
$119.99
Ritchey's SuperLogic Zero Press Fit Headset is compatible with head tubes that accept internal headset cups. It's a sleek internal headset with Ritchey's proven angular-contact bearings, a special Ritchey grease and aluminum cups for super light weight. For smoothness and durability, the bearings are Ti-coated ceramic hybrids that carry a lifetime guarantee.
Ritchey Superlogic Zero Press Fit Tapered Headset
$119.99
Ritchey's Superlogic Zero Press Fit Tapered Headset is compatible with head tubes that accept internal headset cups in tapered head tubes. This slick set features ceramic bearings for the smoothest turns, while the minimal profile keeps your stack height low. It's light, durable, and smooth; you're set.
Ritchey WCS Drop In Integrated Lower Headset Assembly
$24.95 - $39.95
For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the WCS Drop In Integrated Headset stands above all others. This alloy headset lower features stainless steel angular contact sealed cartridge bearings with a titanium coating for corrosion resistance, and they're packed with Ritchey high-webbing grease. - Material: Alloy - Bearing: Sealed cartridge, Ti-coated - Weight: 28-35g
Ritchey WCS Drop In Integrated Lower Headset Assembly: 1-1/4-inch
$34.95
For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the WCS Drop In Integrated Headset stands above all others. This alloy headset lower features stainless steel angular contact sealed cartridge bearings with a titanium coating for corrosion resistance, and they're packed with Ritchey high-webbing grease. - Material: Alloy - Bearing: Sealed cartridge, Ti-coated - Weight: 28-35g
Ritchey WCS Drop In Integrated Upper Headset Assembly: 1-1/8-inch
$29.95
For bikes featuring integrated headsets (such as the Ritchey Road Logic and Swiss Cross), the WCS Drop In Integrated Headset stands above all others. This carbon fiber beauty features full-complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease. - Top cap: 8.3mm - Material: Alloy - Upper Fit (S.H.I.S.): IS42/28.6 - Upper Bearing OD: 41.8 - Top Cover OD: 46mm - Bearing: Sealed cartridge, Ti-coated - Weight: 36g
Ritchey WCS Logic Cross Threadless Headset
$84.99
Ritchey's WCS Logic Cross Headset boasts machined aluminum cups for excellent longevity, light weight and super looks. A smaller upper angular cartridge bearing saves weight while a larger lower angular cartridge bearing boosts strength and durability. The integrated brake-cable hanger is a nice, clean touch.
Ritchey WCS Logic Headset: 1-inch
$69.95
The WCS Logic Threadless Headset the reliable workhorse of the Ritchey threadless headset range. This smooth and reliable specimen features lightweight, precision-machined aluminum cups, sealed cartridge 45/45-degree hybrid ceramic bearings with a titanium coating, and comes packed with Ritchey Grease and a sealed design promises minimal penetration from the elements. - Stack Height: 28.3mm - Material: Alloy - Upper Fit (S.H.I.S.): EC34/28.6 - Lower Fit (S.H.I.S.): EC34/30 - Bearing: Sealed cartridge (ACB) - Ti coated
Ritchey WCS Logic Threadless Headset
$74.95
The Ritchey Logic WCS threadless headset features angular-contact cartridge bearings with a lifetime guarantee. • Bearing Type: Cartridge • Color: Black • Crown Race: 30 • Defined Color: Black • Lower Stack Height: 12.9 mm • S.H.I.S Lower: EC34 • S.H.I.S Upper: EC34 • S.H.I.S. Stem Clamp Diameter: 28.6 • Upper Stack Height: 15.4 mm • Weight: 110 g
Ritchey WCS Press Fit Headset Lower
$44.95
- Full complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease - Corrosion-resistant Ti-coated bearings - Material: Alloy - Lower Fit (S.H.I.S.): ZS56/40 - Lower HT OD/ID: 62/56 - Bearing: Sealed Cartidge, ti coated
Ritchey WCS Press Fit Headset Upper
$34.95
- Full complement stainless steel angular contact cartridge bearings packed with Ritchey high-webbing grease - Corrosion-resistant Ti-coated bearings - Top cap: 7.3 - Material: Alloy - Upper Fit (S.H.I.S.): ZS44/28.6 - Upper HT OD/ID: 50/44 - Bearing: Sealed cartridge, ti coated - Weight: 43g (7.3mm)
Promax Stem Spacer Kit
$9.99
- Superlight CNC machined 6061 aluminum spacers for fine-tuning stem height - Includes one each 3, 5, 10mm spacers and two each 1mm spacers
Profile Design Carbon Headset Spacers (1-1/8-inch)
$25.99
Profile Design's lightweight and sleek looking headset spacers are just what you need to make sure your bike functions and looks great. Available in 2, 3, 5, 10, and 20mm thicknesses.
Profile Design Threadless Size Converter
$16.99
Converts quill style forks to use threadless stems.
Origin8 1-inch Threaded Headset
$30.60
• Sealed cartridge bearings • CNC machined 6061-T6 aluminum cups with laser etched logos • 26.4mm & 27.0mm races included • S.H.I.S.: EC30/25.4-24tpi|EC30/26 • Steerer Diameter: 25.4mm • Cup Diameter: 30.2mm • Race Diameter: 26.4mm • Stack Height: 42.5mm • Size: 1-inch • Black or Silver • Weight: 110g including lock nut
Origin8 3K Weave Compression Plug
$17.99
- 3-piece expander design provides a secure fit within carbon steerer tubes - 22-25mm range of expansion - 50mm height reinforces carbon steerer tube beneath the stem - New design evenly distributes headset compression forces - Lightweight AL6061 alloy construction - Stainless steel bolt
Origin8 Alloy Flat Compression Plug
$13.99
- 3-piece expander design provides a secure fit within carbon steerer tubes - 22-25mm range of expansion - 50mm height reinforces carbon steerer tube beneath the stem - New design evenly distributes headset compression forces - Lightweight AL6061 alloy construction - Stainless steel bolt
Origin8 Alloy Headset Spacers
$9.99
Lightweight aluminum alloy - Non-Keyed - Height: 20mm - 10 to a bag
Origin8 Alloy Lite Compression Plug
$13.99
- 3-piece expander design provides a secure fit within carbon steerer tubes - 22-25mm range of expansion - 50mm height reinforces carbon steerer tube beneath the stem - New design evenly distributes headset compression forces - Lightweight AL6061 alloy construction - Stainless steel bolt
Page 1 of 4 Next page