Filter By:
Parts & Accessories

$20.00
The DELTA standard requires a rotational movement of the foot toward the outside or inside for disengagement. This function improves cyclist's safety; no body or bearing prevents disengagement toward the inside. Compatible with non-KEO LOOK pedals, their contact area is wide for optimal comfort. They also feature a memory positioner to aid when changing cleats.
- Use: Road & Indoor Bike
- Material: Polyacetal + PTFE
- Lateral adjustment: 4mm
- Longitudinal adjustment: 12mm
- Weight (pair + fasteners): 75g

$20.00
The MADE by LOOK KEO standard is recognized in the cycling world for its minimal weight and compact design of the cleat and pedal combo. Of course, compatible with all pedals on the market, their memory positioner is a major advantage when changing your cleats. Their principle and use are the same as the DELTA cleat standard; engagement and disengagement remain efficient and reassuring.
- Use: Road
- Material: Polyamide + PTFE
- Lateral adjustment: 4mm
- Longitudinal adjustment: 12mm
- Weight (pair + fasteners): 68g

$25.00
The KEO GRIP cleats closely resemble the KEO CLEAT model, yet they boast the added feature of a TPU layer on the shoe side which prevents the risk of cleats sliding on carbon soles. Their anti-slip surface on the pedal side offers extra safety and stability when walking.
- Use: Road
- Material: Polyamide + TPU
- Lateral adjustment: 4mm
- Longitudinal adjustment: 9mm
- Weight (pair + fasteners): 68g

$10.89
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers.
- Compatible with Exustar cleat C01, C03, and C05
- Durable and flexible rubber
- Can be used with either floating or fixed position cleats
- Weight of only 14 grams/pair

$12.79
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers.
- Compatible with Look Keo System
- Durable and flexible rubber
- Can be used with either floating or fixed position cleats
- Weight of only 45 grams/pair

$24.95
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.

$7.99
Dimension Nylon Basic Toe Straps
-Durable metal buckle
-Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution must be used to keep the strap tail out of the wheel)
- 450mm

$9.99
Dimension Mini Toe Clips
- Toe clips do not accept toe straps
- Sold as a pair
- Mounting hardware for the toe-clip is included

$9.99
Dimension Toe Straps.
- Durable metal buckle
- Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel)
- 440mm length

$9.99 - $10.95
Dimension Toe Clips and Straps Set.
Includes:
- 4 bolts
- 4 nuts (washers included)
- 2 nylon toe straps
- 2 toe clips

$11.99
Dimension Toe Straps.
- Durable metal buckle
- Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel)
- 430mm length

$11.99
Dimension Toe Straps.
- Durable metal buckle
- Multi-purpose strap can also be used as a lash strap for -bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel)
- Poly leather (vegan) toe strap
- Velvet finish
- 450mm length

$19.90
- Set of 44 total replacement steel pins for vault pedals
- Run threads-out for maximum traction or flip the pins to heads-out for less grip
- 16 Short pins (for use in the center) overall length 8.5mm, stud is 4.5mm
- 28 Long pins (for use in the outside edge) overall length 12.5mm, stud is 4.5mm
- Use either a 5mm spanner or the included 2mm hex wrench to secure/remove
$7.99
Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.

$9.99
Polyurethane pads with diamond plate traction pattern allow riders to customize their pedals for a perfect interface with any shoe.
- Kit includes eight 1mm traction pads and eight 2mm traction pads

$9.99
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.
- Sold in pairs

$11.99
Crank Brothers' 5050 Pin Kit includes fifty 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.

$14.99
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer.
The kit includes:
- 8 × 1mm traction pads
- 8 × 2mm traction pads
Compatible with:
- Candy 7 & 11
- Model years 2016 – present

$14.99
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer.
The kit includes:
- 8 × 1mm traction pads
- 8 × 2mm traction pads
Compatible with:
- Mallet E
- Model years 2016 – present

$15.00 - $16.00
Everything you need to keep those Crank Bros pedals spinning freely is found in their Pedal Rebuild Kit. Each kit includes parts and instruction to rebuild one pair of Crank Bros. pedals.

$24.99
Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy.
Pedal Refresh Kit includes:
-Enduro catridge bearings
- Igus LL-glide bearings
- Double seal system (internal and external seals)
- Hex alloy end caps
- O-rings
- Nuts
- Sleeve bushings
- Bearing removal tool
Compatible with the following pedals (2010-present):
- Eggbeaters
- Candys
- Mallets
- 5050s

$24.99
A revolution in performance and reliability.
- The kit includes premium internal components:
- Inner spindle seal x 2
- Outer spindle seal x 2
- Inner Igus solid bearing x 2
- Outer Enduro cartridge bearing x 2
- Spindle nut x 2
- Outer bearing carrier x 2
- Compatibility: Doubleshot (2016), Doubleshot 2 (2017+), Soubleshot 3 (2017+)

$24.99
A revolution in performance and reliability.
The kit includes premium internal components:
- Enduro catridge bearings
- Enduro sealed needle bearing
- Double seal system (internal and external seals)
- Hex alloy end caps
- O-rings, nuts
- Sleeve bushings
- Bearing removal tool

$24.99
A revolution in performance and reliability.
The kit includes premium internal components:
- Inner bearing o-ring x 2
- Spindle seal x 2
- Outer Igus solid bearing x 2
- Inner Igus solid bearing half x 4
- Bearing Retainer Bolt x 4
- Outer o-ring x 2
- Grease port screw x 2
- Compatibility: Stamp (2016), Stamp 7 (2017+), Stamp 11 (2017+)

$26.99
Cleats with a more forgiving 10-deg release.
- Optimized for novice riders or those new to clip-in pedals
- 10-deg release angle makes it easier to unclip
- 2-hole bolt pattern for mountain bike shoes
- Plastic spacing shims included
- Compatible with all Crankbrothers clip-in pedals

$26.99
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.

$26.99
Crank Brothers' Zero Float Cleats offer no pedal float for greater pedaling efficiency. They're made from solid brass for crisp entry and exit, and top-notch durability.
- Weight (pair): 30 grams
- Shoe compatibility: SPD
- Release angle: 15 degrees

$49.99
Widen your Q-factor to 57mm.
- Long spindles are 5mm longer than standard.
- The kit includes: 1 pair long spindles + refresh kit (Enduro cartridge bearings, igus ll-glide bearings, DSS double seal system: internal and external seals, hex alloy end caps, o-rings, nuts, sleeve bushings, & bearing removal tool).
- Compatible with: Eggbeater, Candy, Mallet, 5050, Double shot, model years 2010-present
- Weight: 112g per pair
- Spindle material: forged SCM 435 chromoly steel
- Q-factor: 57mm

$150.00
The ultimate weight-saving upgrade.
- The kit includes: 1 pair titanium spindles + refresh kit (Enduro cartridge bearings, Igus ll-glide bearings, DSS double seal system: internal and external seals, hex alloy end caps, o-rings, nuts, sleeve bushings, & bearing removal tool).
- Compatible with: Eggbeater, Candy, Mallet, 5050, Double Shot, model years 2010-present
- Weight: 60g per pair
- Spindle material: 6al/4v titanium
- Max. rider weight: 200lb/90kg
- Q-factor: 52 mm