Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts & Accessories

$15.99
- Shimano SPD-SL-style
- Engineered thermoplastic injection body
- Weight of 24 grams per cleat
- 4.5-degree floating arc

$24.95
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.

$7.99
Dimension Nylon Toe Clips.
Included instructions account for toe strap installation, but straps must be purchased separately
-Toe straps are NOT included
-Sold as a pair

$7.99
Dimension Nylon Basic Toe Straps
-Durable metal buckle
-Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution must be used to keep the strap tail out of the wheel)

$11.99 - $13.99
Dimension Toe Straps.
- Durable metal buckle
- Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel)
- 430mm length

$9.99
Dimension Mini Toe Clips
- Toe clips do not accept toe straps
- Sold as a pair
- Mounting hardware for the toe-clip is included

$9.99
Dimension Toe Straps.
- Durable metal buckle
- Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel)
- 440mm length

$11.99
Dimension Toe Straps.
- Durable metal buckle
- Multi-purpose strap can also be used as a lash strap for -bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel)
- Poly leather (vegan) toe strap
- Velvet finish
- 450mm length

$10.95
Dimension Toe Clips and Straps Set.
Includes:
- 4 bolts
- 4 nuts (washers included)
- 2 nylon toe straps
- 2 toe clips

$12.99
- Strapless design is easy to engage without fully committing to the pedal
- No special shoes required
- Improves pedaling efficiency
- Molded from unbreakable nylon
- Please make sure your pedals have visible mounting points or a removable reflector for mounting prior to purchase
- Includes mounting hardware. Note: metal plate may not be required during installation.

$11.99
Crank Brothers' 5050 Pin Kit includes fifty 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.

$9.99
Polyurethane pads with diamond plate traction pattern allow riders to customize their pedals for a perfect interface with any shoe.
- Kit includes eight 1mm traction pads and eight 2mm traction pads
$7.99
Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.

$49.99
Widen your Q-factor to 57mm.
- Long spindles are 5mm longer than standard.
- The kit includes: 1 pair long spindles + refresh kit (Enduro cartridge bearings, igus ll-glide bearings, DSS double seal system: internal and external seals, hex alloy end caps, o-rings, nuts, sleeve bushings, & bearing removal tool).
- Compatible with: Eggbeater, Candy, Mallet, 5050, Double shot, model years 2010-present
- Weight: 112g per pair
- Spindle material: forged SCM 435 chromoly steel
- Q-factor: 57mm

$15.00 - $19.99
Everything you need to keep those Crank Bros pedals spinning freely is found in their Pedal Rebuild Kit. Each kit includes parts and instruction to rebuild one pair of Crank Bros. pedals.

$24.99
Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy.
Pedal Refresh Kit includes:
- enduro catridge bearings
- igus LL-glide bearings
- double seal system (internal and external seals)
- hex alloy end caps
- o-rings
- nuts
- sleeve bushings
- bearing removal tool
Compatible with the following pedals (2010-present):
- Eggbeaters
- Candys
- Mallets
- 5050s

$24.99
A revolution in performance and reliability.
- The kit includes premium internal components:
- Inner spindle seal x 2
- Outer spindle seal x 2
- Inner Igus solid bearing x 2
- Outer Enduro cartridge bearing x 2
- Spindle nut x 2
- Outer bearing carrier x 2
- Compatibility: Doubleshot (2016), Doubleshot 2 (2017+), Soubleshot 3 (2017+)

$24.99
A revolution in performance and reliability.
The kit includes premium internal components:
- Enduro catridge bearings
- Enduro sealed needle bearing
- Double seal system (internal and external seals)
- Hex alloy end caps
- O-rings, nuts
- Sleeve bushings
- Bearing removal tool

$24.99
A revolution in performance and reliability.
The kit includes premium internal components:
- Inner bearing o-ring x 2
- Spindle seal x 2
- Outer Igus solid bearing x 2
- Inner Igus solid bearing half x 4
- Bearing Retainer Bolt x 4
- Outer o-ring x 2
- Grease port screw x 2
- Compatibility: Stamp (2016), Stamp 7 (2017+), Stamp 11 (2017+)

$26.99
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.

$29.99
Crank Brothers' Quattro 3-Hole Cleats are the perfect cleats to use with your 3-hole compatible road shoes and Crank Brothers pedals. They're made from solid brass for crisp entry and exit, and durability.

$9.99
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.

$150.00
The ultimate weight-saving upgrade.
- The kit includes: 1 pair titanium spindles + refresh kit (Enduro cartridge bearings, Igus ll-glide bearings, DSS double seal system: internal and external seals, hex alloy end caps, o-rings, nuts, sleeve bushings, & bearing removal tool).
- Compatible with: Eggbeater, Candy, Mallet, 5050, Double Shot, model years 2010-present
- Weight: 60g per pair
- Spindle material: 6al/4v titanium
- Max. rider weight: 200lb/90kg
- Q-factor: 52 mm

$14.99
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer.
The kit includes:
- 8 × 1mm traction pads
- 8 × 2mm traction pads
Compatible with:
- Candy 7 & 11
- Model years 2016 – present

$14.99
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer.
The kit includes:
- 8 × 1mm traction pads
- 8 × 2mm traction pads
Compatible with:
- Mallet E
- Model years 2016 – present

$9.99
Crank Brothers' Tread Contact Sleeves shim the area between the pedal and your shoes' tread so there is no rocking or play when you're clipped in. They provide a solid platform to put down all your power! They work with either your Eggbeaters or Candy pedals, and each includes 1mm, 2mm, and 3mm shims.