Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Seatposts

Strider Extra-Long Seatpost w/Saddle
$16.00
Is your little Strider rider getting taller? Strider's Extra-Long Seatpost w/Saddle extends your child's Strider Bike (sold separately) saddle height another three inches to a maximum of 19 inches off the ground. Recommended for children over four years old, it easily replaces the standard seatpost and saddle.
Cane Creek Thudbuster Seatpost
$164.00 - $175.00
Cane Creek's Thudbuster Seatpost adds comfort to any hardtail bike. Using a parallel-linkage design, the Thudbuster moves down and back at the same rate as the rear wheel moves forward and up when you hit a bump, helping you maintain control. The post and linkage is made of aluminum with Teflon coated steel bushings so you know it's built to last. And, the interchangeable elastomers (sold separately) can be easily exchanged to your preferences.
ENVE Seatpost
$275.00
Thanks to its strong one-piece molded carbon construction, ENVE's Seatpost is equally at home on technical singletrack and asphalt. Crafted from carbon, it boasts a stellar combination of feathery lightness and supermodel looks. And, its single-bolt head offers easy angle and fore-aft adjustments.
Race Face Turbine Seat Post
$79.99
- 3D forged from 2014 heat-treated aluminum for optimal strength to weight ratio - Race Face's triple butting design maintains strength in critical areas while reducing overall weight - The tube is anodized & shot peened for increased fatigue life - Updated Hunter head design for easy saddle installation and full adjustability - 3D forged from 2014 heat treated aluminum with triple butted mast - Thumbscrew tightening system allows quick dial-in of the saddle angle by hand - Angled clamp bolts allow easy tool access for hassle free adjustment - Rubber grommet seals the post to prevent water from entering seat tube - Accepts 7/8mm CrMo/alloy and 7/9mm carbon rails. 260g (30.9mm)
Whisky Parts Co. No. 7 Alloy Seatpost
$65.00
The Whisky No.7 Seatposts are made from the highest quality materials to be durable, lightweight, and comfortable. Whether you’re remounting during the cross race, or abusing them on the trail, you can trust Whisky’s seatposts. Available in different diameters and offsets. - Convenient finger adjustment of saddle angle - Unidirectional carbon shaft, forged aluminum head - No rider weight limit - 5 year Whisky warranty - ASTM Condition 3 - For rough off-road riding and jumps less than 24"
Thomson Elite Setback Seatpost
$114.95
Thomson's Elite Setback Seatpost is perhaps one of the most recognizable bicycle components in the world and it has earned its reputation as a super-strong, light and reliable beauty. With roots in the aerospace industry, Thomson builds the post with a tough and light 7000-series aluminum body, an elliptical extrusion that adds strength and stiffness, and a head and seat clamp forged and machined from a block of aluminum to eliminate any possible weak areas. Plus, its simple-to-use 2-bolt seat clamp allows speedy, infinite and secure seat angle adjustment from minus 5 degrees to plus 29 degrees. Upgrade your favorite ride to a Thomson seatpost and start riding in style.
Thomson Masterpiece Seatpost
$159.95
The name says it all: Thomson's Masterpiece Seatpost combines the best materials, exceptional strength, perfect function, light weight and the classic beauty of all Thomson products. All Masterpiece posts are extruded and then painstakingly machined from a single block of ultra-strong 7000-series aluminum, and they all weigh less than 200 grams complete. This means you get a post tough enough for any ride on or off road and at a nice and light weight that will complement your dream bike. What's more, you get Thomson's easy-to-adjust and super reliable 2-bolt seat clamp that makes it a breeze to dial in your perfect seat position from minus 5 degrees to plus 29 degrees.
ENVE Seatpost
$275.00
Thanks to its strong one-piece molded carbon construction, ENVE's Seatpost is equally at home on technical singletrack and asphalt. Crafted from carbon, it boasts a stellar combination of feathery lightness and supermodel looks. And, its 2-bolt head offers easy angle and fore-aft adjustments. - Includes cradles for standard round and oval saddle rails - Length: 400mm - Weight: 204 grams (31.6mm version)
Salsa Guide Alloy Seatpost
$50.00
The Salsa Guide Seatpost is designed to blend into the background; just like a good seatpost should. Strong, reliable, and always just where you left it. - 6061 Aluminum shaft - Two-bolt head
Sunlite Alloy 350mm Seatpost
$19.99 - $23.99
• Forged aluminum • Integrated micro-adjust seat clamp
Origin8 Pro Fit Alloy Seat Post
$26.35 - $30.99
Origin-8's Pro Fit Alloy Seat Post is made of light and durable forged aluminum that's been anodized and laser etched for a custom look. It also features an adjustable 2-bolt clamp that holds fast and lets you easily dial in your seat position. And, this fine post comes in a variety of diameters to fit almost any bike.
Race Face Turbine R Dropper Seatpost
$280.24 $294.99 5% Savings
The Turbine R dropper brings you the function and reliability you deserve with Race Face aesthetics to complete your build. - Race Face 1x Lever or Universal Lever compatible - Compatible with Matchmaker
RockShox Reverb Dropper Seatpost
$299.00
New Guts, New Glory Don’t let its familiar good looks fool you—Reverb is a whole new weapon. Its internals have been completely re-engineered to improve on its already legendary performance and to offer enhanced reliability: all the smallest details, down to the single seal, have been re-evaluated and updated to pass the hardest and longest durability tests. This is the brand-new Reverb, engineered for the next-generation mountain biker. - Completely redesigned internals with new SKF internal floating piston - Improved performance and durability in all conditions - Increased bushing overlap - New dedicated post length per travel length - WEIGHT: 520g (Weight based on 340mm post length, 30.9mm diameter, 100mm travel, MMX remote with shifter hardware and 1300 hose) - LENGTH: 340mm, 390mm - COLORS: Black - MATERIAL: Shaft: 3D forged 7050 alloy , Head: 7050 forged alloy - OTHER: Zero offset , remote: adjustable return speed at the handlebar, discrete or Match Maker X, left or right
X-Fusion Hilo Strate Dropper Seatpost
$242.99 - $289.99 $269.99 - $289.99 Up To 16% Savings
X-Fusion's Hilo Strate dropper seatpost is a no-nonsense post with air spring and hydraulic lockout. The internal cable routing keeps your bike's appearance clean and simple while keeping the cable out of harm's way. The BAT activation remote with uni-directional lever can be mounted on the left or right, above or below the handlebars. - Double key-way design prevents lateral twisting - Double bolt clamp with wide range of seat angle adjustment - Seat clamp fits both standard and 7 x 9 mm Carbon Rails - Cable activated, hydraulic action, infinitely adjustable travel - Weight: 530g - Remote Position: Left or Right - Cable Routing: Internal - 2-year warranty
Dimension Two-Bolt Seatpost
$24.99
Dimension Two-Bolt Seatposts provide a sturdy and durable saddle perch for cross country and all-mountain riding in three diameters, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - 0mm offset
Ritchey WCS Kite Dropper Seatpost
$299.95 - $369.95
When designing the WCS Kite dropper, Tom looked at what makes existing droppers fail and why their lifespan was so short. He knew service was a main contributing factor in dropper's lives, and wanted to create a post that could be easily serviced should something happen. In doing so, he created a system that is deceptively simple and incredibly reliable. The 3-position Kite offers 30mm of initial drop - the optimal height for lowered center of gravity while still providing an efficient pedal stroke - and full drop for when getting low and behind the rear end is necessary. - Three travel stops (0, 30mm, full drop) - Weight: sub 500 grams (including remote & housing) - 31.6 diameter - Stealth cable routing - Compatible with a variety of brake lever and bar mount configurations including Shimano I-SPEC I / II & SRAM Matchmaker - New two-bolt Trail post clamp offers easy adjustment and will not slip - Easily serviceable - Watch service video
Ritchey WCS Zero Carbon Seatpost
$149.95
The redesigned Zero post offers no-slip saddle engagement and high adjustability by securing the rails with fore and aft bolts. Whether you're hitting rough singletrack or remounting in a hurry, this ensures the saddle stays exactly where you want it. - Carbon Construction with alloy clamps - Fore/aft adjustment bolts for precision adjustment and secure clamping - Zero offset - Length: 400mm - 200g (27.2x400)
Origin8 Vertex Carbon Seatpost
$149.99
Full UD carbon shaft with alloy clamp - Wide saddle clamp design reduces rail stress and flex - Micro-adjust 2 bolt clamp design - Available in 0mm and 15mm setback options - ISO-Mountain safety certified
FSA SL-K Seatpost
$104.99
FSA's SL-K Seatpost is lighter and stiffer than ever! Using a UD carbon shaft with a bonded alloy head and a sophisticated MTC clamp design, FSA has achieved what they believe is the finest seat post yet. - UD Carbon shaft, 2-bolt SBS alloy head, and chromoly hardware - Min. Height: 40mm - SB0 = 0mm offset - SB20 = 20mm offset
Race Face Turbine Dropper
$379.00
Introducing the Turbine Dropper Post: A patented hybrid design that couples mechanical and hydraulic locking technologies, inspired by MTB disc brakes. The rider's body weight is supported with a mechanical lock; meaning a solid connection and less potential for failure over time. Lower air pressures and static seals offer unrivaled performance, control, and reliability. Turbine also operates in below-freezing temperatures making it perfect for Fat Bikes and cold weather riding. Less down time for service equals more saddle time on the trails. - Internal cable routing - Infinite-adjust within stroke - Race Face proven Hunter Head 2-bolt design - Quick Connector allows easy, tool-free disconnection - Remote uses standard shifter cable and housing - Functions at full capacity in below-freezing conditions (i.e. suitable for Fat Bikes & winter riding) - 1x Front shifter style hop-up lever available in Black, Red, Blue, Green, Orange
Dimension Suspension Suspension Seatpost
$33.99
Dimension Suspension Seatpost - Clamp Style: Std Rails - Diameter: 27.2mm - Length: 350mm - Material: Aluminum - Max Height: 255mm - Min Height: 130mm - Offset (mm): 0mm - Seatpost Type: Suspension - Travel (mm): 35mm - Weight: 450g
Odyssey Pivotal Seat Post
$29.99
It’s a traditional straight up pivotal design with a 200mm length.
FSA Metropolis Seatpost
$62.99
FSA's Metropolis seatpost is CNC machined from AL6069 aluminum and features a forged alloy single-bolt head with chromoly hardware. Simple and elegant, this seatpost gets the job done weighing a scant 257 grams.
Zipp Service Course SL Seatpost
$160.00
Since the introduction of Zipp's line of Service Course SL components, they've had amazing success with pro-level athletes in all disciplines. While the successes have been coming, they've also drawn from riders' feedback. Zipp not only learned how and why athletes make their equipment choices, but how manufacturing methods and materials affect product performance. With new knowledge as well as new engineering, they're proud to introduce a completely redesigned Service Course SL seatpost with a carbon tube and aluminum head for better shock absorption and weight savings. - Lightweight clamping system - Updated carbon tube material
Soma Wakizashi Aero Seatpost
$35.90
- Retro-looking aero seatpost for road bikes - Aluminum, body with a single bolt head
FSA K-Force Seatpost SB32
$191.99
The K-Force post’s one-piece carbon fiber shaft and head are topped off with a forged alloy Minimal Top Clamp, giving a full range of adjustment and secure saddle mounting at a very low weight. There’s also the option of mounting a Shimano Di2 battery in the bottom of the post. - One piece continuous carbon fiber construction - Forged alloy Minimal Top Clamp (MTC) - UD carbon finish - Removable mounting hardware for FSA WE or Di2 battery
Easton EA70
$64.99
The EA70 Zero is Easton’s top-end aluminum seatpost, with a sleek, low-profile clamp design, impressive stability and great clearance. This post features EA70 TaperWall aluminum tubing coupled with a durable two-bolt integrated head.
Easton EA90
$99.99
Our new EA90 seatpost applies our patent pending ISA saddle adjustment allowing for independent seat angle and fore-aft movement, helping you refine your positioning without needing to undo your rail clamps for each minute tweak. Saddle angle is then locked in place so you have the confidence your saddle will stay put after you find your fit. - Finish: Black anodized - Weight: Zero, 295g; Setback, 268g - Head offset: 0mm, 20mm - Length: 350mm w/ 80mm min. insert - Quill size: 27.2mm - Material: EA90 alloy
Sunlite Adjustable Suspension Seatpost
$31.99
• Aluminum • Coil spring provides plush suspension • Adjustable pre-load design • Micro-adjust seat clamp • 450 grams
Sunlite Steel Pillar Seatpost
$5.99 - $9.99
• Steel • Polished-chrome finish • 7/8-inch seat-clamp diameter
Page 1 of 4 Next page