Filter By:
Hubs

$435.00 - $470.00
Industry Nine Hydra Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic Hydra hub is made from start to finish in Asheville, NC. From turning and milling bar stock 7075-T6 aluminum for shells, axles, and endcaps, wire EDM cutting A2 tool steel for pawls and driverings, to in-house anodization lab, every step of design, engineering, manufacturing, and assembly is done to exacting standards.
- 690 P.O.E. Hydra Freehub body engages every 0.52 degrees, yielding telepathic control
- 6 pawl, 6 phase
- 115 tooth drivering
- Easily serviced with no proprietary tools—designed to keep you in the saddle and out of the service queue

$470.00
- Featuring the new Hydra internals, designed around a traditional flanged hub
- Angled flanges for lower spoke stress and large diameter disc flange improves wheel stiffness and brake torque transfer
- Hydra freehub mechanism improves over previous Torch hub internals with multiple heads engaging for strength and quicker engagement
- 6-pawl, 6-phase, 115-tooth drive ring with .52 deg between engagement points
- 6-bolt/44mm-BCD International Standard disc mounting dimensions
- There can be color variations during anodization from batch to batch from the colors you see on our site
- Made in Asheville, NC USA
SPECIFICATIONS
- Front/r: rear (Micro Spline)
- Axle/spacing (mm): 12x148 Boost
- Hole: 32h
- Color: turquoise
- Weight: 286g
- Flange diameter: 58mm left, 60mm right
- Center to flange: 38mm left, 25mm right

$460.00
- Made start to finish in Asheville, NC
- Light weight and easy to service
- 690 POE feehub for near instantaneous 0.52 degree engagement

$460.00
- Featuring the new Hydra internals, designed around a traditional flanged hub
- Angled flanges for lower spoke stress and large diameter disc flange improves wheel stiffness and brake torque transfer
- Hydra freehub mechanism improves over previous Torch hub internals with multiple heads engaging for strength and quicker engagement
- 6-pawl, 6-phase, 115-tooth drive ring with .52 deg between engagement points
- 6-bolt/44mm-BCD International Standard disc mounting dimensions
- There can be color variations during anodization from batch to batch from the colors you see on our site
- Made in Asheville, NC USA
- HG 8-11sp: Not compatible with HG 11sp road cassettes
SPECIFICATIONS
- F/r: rear (HG 8-11sp)
- Axle/spacing (mm): 12x148 Boost
- Hole: 32h
- Color: purple
- Weight: 286g
- Flange diameter: 58mm left, 60mm right
- Center to flange: 38mm left, 25mm right

$306.00 - $309.00
Confident and capable of cleaning the A-line yet budget-friendly to save up for a season of bucket-list rides, the 1/1 hub stays true to the performance heritage of Industry Nine. Featuring a dual phased-pawl drive mechanism accomplishing 90 points with 4° engagement, by way of a six pawl driver and 45-tooth drivering.
- High-load sealed cartridge bearings
- Classic j-bend spokes
- Robust protection system using a labyrinth radial lip seal and endcap proximity seals unencumbered by bearing wear or preload
- CNC machined, anodized, and assembled entirely in Asheville, NC
- Service-friendly retained pawls actuated by durable leaf-springs
- Unified service parts across the range

$240.00
- Featuring the new Hydra internals, designed around a traditional flanged hub
- Angled flanges for lower spoke stress and large diameter disc flange improves wheel stiffness and brake torque transfer
- Hydra freehub mechanism improves over previous Torch hub internals with multiple heads engaging for strength and quicker engagement
- 6-pawl, 6-phase, 115-tooth drive ring with .52 deg between engagement points
- Center Lock 35mm splined disc rotor mount
- Made in Asheville, NC USA
SPECIFICATIONS
- F/r: front
- Axle/spacing (mm): 15x110 Boost
- Hole: 28h
- Color: black
- Weight: 137g

$215.00 - $240.00
Industry Nine Classic hubs are the heart of your wheelset, everything revolves around them, literally. Every Classic mountain hub is made from start to finish in our Asheville, NC machine shop. From turning and milling bar stock 7075-T6 aluminum for shells, axles, and endcaps, wire EDM cutting A2 tool steel for pawls and driverings, to our own in-house anodization lab, every step of design, engineering, manufacturing, and assembly is done on-premises to our exacting standards.
Hydra Classic mountain hubs are loaded with features every rider will appreciate, such as revolutionary 0.52° engagement, generously low weights, and an intuitive layout that can be serviced without any proprietary tools.

$240.00
- Featuring all the advantages of the Torch freehub, designed around a traditional flanged hub
- Angled flanges for lower spoke stress and large diameter disc flange improves wheel stiffness and brake torque transfer
- 2 bearing front: end caps available for QR, 9mm thru-bolt, and - 20x110mm thru-axle sold separately
- There can be color variations during anodization from batch to batch from the colors you see on our site
- Made in Asheville, NC USA
SPECIFICATIONS
- F/r: front
- Axle/spacing (mm): 15x110 Boost
- Hole: 32h
- Color: purple
- Weight: 166g
- Flange diameter: 58mm left, 45mm right
- Center to flange: 27mm left, 42mm right

$240.00
- Featuring all the advantages of the Torch freehub, designed around a traditional flanged hub
- Angled flanges for lower spoke stress and large diameter disc flange improves wheel stiffness and brake torque transfer
- 2 bearing front: end caps available for QR, 9mm thru-bolt, and 20x110mm thru-axle sold separately
- There can be color variations during anodization from batch to batch from the colors you see on our site
- Made in Asheville, NC USA
SPECIFICATIONS
- Front/r: front
- Axle/spacing (mm): 15x110 Boost
- Hole: 32h
- Color: turquoise
- Weight: 166g
- Flange diameter: 58mm left, 45mm right
- Center to flange: 27mm left, 42mm right

$180.00
Industry Nine Freehub bodies are machined in North Carolina and contain all necessary pawls, springs and bearings for servicing or converting their hubs.
- Kits include freehub, bearings, inner spacer, pawls, and springs
- Not compatible with Torch Road or Torch Classic Road hubs
SPECIFICATIONS
- Material: Aluminum
- Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed , Shimano Dynasys 11 Speed Mountain

$136.00 - $144.00
Confident and capable of cleaning the A-line yet budget-friendly to save up for a season of bucket-list rides, the 1/1 hub stays true to the performance heritage of Industry Nine.
- High-load sealed cartridge bearings
- Classic j-bend spokes
- Robust protection system using a labyrinth radial lip seal and endcap proximity seals unencumbered by bearing wear or preload
- CNC machined, anodized, and assembled entirely in Asheville, NC
- Unified service parts across the range
Page 1 of 1