Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Hubs

$77.70
DT Swiss Sinc Ceramic cartridge bearings. - The black dust cover is intended to be installed facing the hub and the tan seal is intended to face externally
$77.70
DT Swiss Sinc Ceramic cartridge bearings. - The black dust cover is intended to be installed facing the hub and the tan seal is intended to face externally
$76.90
Direct power meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.
$76.90
Direct power meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.
$76.90
The value-packed DT Swiss 350s Straightpull road hub hits the sweet spot between light weight and reliability. The straight pull spoke design makes for a stiff, responsive wheel that will roll for thousands of nearly frictionless miles.
$73.00
Replacement XD Drivers for DT Swiss hubs. - XD drivers for repair or replacement - If you are changing from a Shimano Freehub body, you will need new end caps; see below SPECIFICATIONS - Material: Alloy - Cassette Body Type: SRAM XD 11/12 Speed
$58.30
Replacement HG compatible mountain freehub bodies for DT Swiss hubs. - Compatible with DT star ratchet rear hubs - Accepts Shimano/SRAM 8,9,10 Speed cassettes and Shimano Dynasys 11-Speed mountain cassettes SPECIFICATIONS - Material: Steel - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed , Shimano Dynasys 11 Speed Mountain
$47.70
Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set. - End caps are compatible with DT Swiss 350/370 series hubs - Fits boost and non-boost hubs
$43.50
Rear-axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted. - DT 12 x 142mm and 12 x 148mm rear hubs use the same end caps - Also used for 12 x 157mm spacing - Not SCS compatible - End caps do not convert non-Boost hubs to Boost 148mm spacing. DT 142x12mm and 148x12mm hubs simply share the same end caps SPECIFICATIONS - Rear Hub Spacing (mm): 142 , 157 - Rear Axle Type: 12mm Thru-axle
$43.50
Rear-axle conversion kits convert your hub to fit a new axle measurement or for a new groupset. All DT Swiss hubs can be converted. - DT 12 x 142mm and 12 x 148mm rear hubs use the same end caps - Also used for 12 x 157mm, 12 x 177mm and 12 x 197mm spacing - End caps do not convert non-Boost hubs to Boost 148mm spacing. DT 142x12mm and 148x12mm hubs simply share the same end caps SPECIFICATIONS - Rear Hub Spacing (mm): 142, 148 - Rear Axle Type: 12mm Thru-axle
$43.50
Rear-axle conversion kits convert your hub to fit a new axle measurement or for a new groupset. All DT Swiss hubs can be converted. - 135mm QR end cap kit for DT 240, 350, and 440 hubs with XD Driver for SRAM 11-speed cassette SPECIFICATIONS - Rear Hub Spacing (mm): 135 - Rear Axle Type: Standard QR
$43.50
Rear-axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted. - 135mm x 12mm thru-axle end cap kit for DT 240, 350, and 440 hubs with XD Driver for SRAM 11-speed cassette SPECIFICATIONS - Rear Hub Spacing (mm): 135 , 150 - Rear Axle Type: 12mm Thru-axle
$27.20
DT-Swiss CenterLock adaptor. Allows 6-bolt rotors to be used on CenterLock hubs. - Rotor thickness between 1.8mm and 2.2mm - Easy assembly and only 29g - Made in Switzerland by DT Swiss - Maximum rotor size 230 mm
$27.20
DT-Swiss CenterLock adaptor. Allows 6-bolt rotors to be used on CenterLock hubs. - Rotor thickness between 1.8mm and 2.2mm - Easy assembly and only 29g - Made in Switzerland by DT Swiss - Maximum rotor size 160mm
$3.40
Parts for repair and maintenance of DT Swiss hubs.
Front axle conversion kits convert your hub to fit a new axle measurement or for a new group set. - End caps are compatible with DT Swiss 350/370 series hubs - Fits boost and non-boost hubs
Previous page Page 2 of 2