Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

26-Inch

Industry Nine Big Rig 770 32H
$1,550.00
Big Rig 770 is our go-to Fatbike wheelset for all-conditions riding - from snow and sand to singletrack, the BR770 is ready for any ride. Laced to our fully customizable and highly adaptable Hydra Fatbike chassis the BR770 is tough for big hits yet light enough to shave potential pounds off your bike over stock wheels. 32h Mountain System Versatile, strong and stiff. Our 32h System hub and spoke chassis forms the foundation of our most capable wheelsets. 6 Pawl HYDRA Freehub Body Our groundbreaking 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control. Direct Thread - Straight Pull Straight pull, integrated nipple, one-piece aluminum spokes that thread directly into the hubshell resulting in a solid, flex-free junction. No special tools or service procedures required. Micro Spline Shimano 11 + 12spd compatible. 2-Year Warranty Warranty coverage against defects on your Industry Nine wheelset or Classic hubset.
HED Big Aluminum Deal 26
$475.00
Fat Bike Wheels That are as B.A.D. as it Gets. Make no mistake, HED’s aluminum variations of Big Deal fat bike wheels are as adventure and race-worthy as it gets. Inspired by the technology of HED’s Big Deal fat bike wheels, HED experts have crafted a set of fat bike wheels made for everyone. At 80mm wide, Big Aluminum Deal wheels offer superb fit with all common fat bike tire sizes. They have the same patented Inflatobam tubeless technology as their carbon counterparts, which means you don’t even need rim tape to set these wheels up tubeless. That means you can save up to a pound of weight per wheel compared to other aluminum fat bike wheels on the market, just in tubes and rim tape! No other aluminum fat bike wheels offer the same combination of easy tubeless setup, stiffness, and jaw-dropping weight savings. Fast-rolling aluminum fat bike wheels are ready for your next adventure, dirt, gravel, snow and beyond, with HED’s Big Aluminum Deal wheels. FEATURES - Built in the U.S.A. - 26" Aluminum Fat Bike Wheel Options - 32 spoke - 12 x 177mm, SRAM XD Driver - 80mm Rim Width - Tubeless Compatible, No Rim Tape Required
HED Big Aluminum Deal 26
$425.00
Fat Bike Wheels That are as B.A.D. as it Gets. Make no mistake, HED’s aluminum variations of Big Deal fat bike wheels are as adventure and race-worthy as it gets. Inspired by the technology of HED’s Big Deal fat bike wheels, HED experts have crafted a set of fat bike wheels made for everyone. At 80mm wide, Big Aluminum Deal wheels offer superb fit with all common fat bike tire sizes. They have the same patented Inflatobam tubeless technology as their carbon counterparts, which means you don’t even need rim tape to set these wheels up tubeless. That means you can save up to a pound of weight per wheel compared to other aluminum fat bike wheels on the market, just in tubes and rim tape! No other aluminum fat bike wheels offer the same combination of easy tubeless setup, stiffness, and jaw-dropping weight savings. Fast-rolling aluminum fat bike wheels are ready for your next adventure, dirt, gravel, snow and beyond, with HED’s Big Aluminum Deal wheels. FEATURES - Built in the U.S.A. - 26" Aluminum Fat Bike Wheel Options - 32 spoke - 15 x 150 hub spacing - 80mm Rim Width - Tubeless Compatible, No Rim Tape Required
DT Swiss BR 2250 Classic 26-inch Front
$416.90
Big tires and wide rims normally mean heavy wheels, but not with the BR 2250 Classic! Nearly as light as standard wheels and with the grip only fat tires can offer, this wheelset turns any fat bike into a fun-machine!
Surly My Other Brother Darryl Rear Rear Wheel - 26
$299.00
Fantastic value for replacement Fatbike wheels. Tubeless-ready and low rolling resistance offer enthusiast performance at budget prices. - Tubeless ready SPECIFICATIONS - Hub/Brake Compatibility: 6-Bolt Disc - Color: Black - Wheel Size: 26" Fat - Cassette Body Type: SRAM XD 11/12 Speed - ISO Diameter: 559 / 26" mtn - Rim Width (Internal): 76.8 - Tire Type: Tubeless Ready Clincher - Axle: 12mm Thru x 177mm
Stan's NoTubes Baron S1
$289.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Baron S1 Wheelset - Use: Plus Tire Performance, Adventure, and Trail - Internal Rim Width: 35mm - Optimal Tire Size: 2.8 to 3.2-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock - Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,998g), 27.5-inch (2,060g), and 29-inch (2,162g)
Stan's NoTubes Crest S1
$289.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Crest S1 Wheelset - Use: Aggressive Cross Country and Trail - Internal Rim Width: 23mm - Optimal Tire Size: 2.0 to 2.25-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock - Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,649g ), 27.5-inch (1,731g), and 29-inch (1,813g)
Quality Wheels SRAM 406 6-bolt / Sun SR25 26-inch Rear
$89.00
Quality Wheels Value Series Disc Rear Wheel 26 SRAM 406 6-bolt / Sun SR25 Black
Quality Wheels SRAM 406 6-bolt / Sun SR25 26-inch Front
$79.00
Best value in quick-release disc wheels.
Sta-Tru 26-inch Double Wall Front Wheel
$57.49 - $60.99
Sta-Tru Double Wall Front Wheels. - Hub/Brake Compatibility: Rim Brake - Wheel Size: 26-inch x 1 3/8 - ISO Diameter: 590 / 26 x 1 3/8-inch - Front Axle: 3/8-inch x 100mm - Valve: Schrader - Tire Type: Clincher
Page 1 of 1