Skip to main content

White Industries XMR Boost Rear Hub - 32H, Black, 148 x 12mm TA, Microspline

White Industries XMR Boost Rear Hub - 32H, Black, 148 x 12mm TA, Microspline
This item is currently not available.

Details

Our XMR+ (Cross/Mountain/Road) Boost hubs are designed around the ISO 6-bolt rotor mounting interface as opposed to the Center Lock mounting standard used on our CLD hub. The Boost spacing allows for wider hub flange spacing which results in better spoke bracing angles. Made in our shop from U.S. sourced 6061-T6 aluminum, they’re available in a range of drillings, colors, and axle configurations.

A question we always get about our disc hubs is, “CLD or XMR? Which is better?”. Neither is “better” than the other. Both share the same internals and the differences really come down to the respective designs having to accommodate the two different rotor mounting interfaces. Bottom line is you really can’t go wrong with either hub!

Most of the time choosing is simply a matter of which disc rotor system you already have on your bike, so your choice is kind of made for you. And if you’re building a new bike, it’s not a bad idea to stick with the rotor system you’re using on your other bikes, just in case you want to swap things around. And to add to it, Shimano and SRAM don’t offer all their rotor models and sizes in both Center Lock and 6 bolt, so be aware of that when speccing out your new rig.

- U.S. made 6061-T6 aluminum
- Enduro ABEC 5 bearings
- 6/4 titanium driver
- 3-pawl, 48 point (7.5 degree) engagement
- Easily serviceable/rebuildable
- Compatible with 6-bolt rotors

SPECIFICATIONS
- 306g
- 28H, 32H, and 36H drillings
- 12mm x 148mm Thru Axles

Part Numbers

MPN Store SKU
HUBXMRB32RMBK12 210000078567