Your Search: "outbound lighting"

Wireless Bike Light with a cutoff beam pattern for Road/Gravel riding Our original Road Edition set the bar high for the last several years. So we were challenged on how to improve it. Right away, we've ditched the large battery pack. This is all internal, self contained, USB-C rechargeable, and slim enough to fit in your pocket. Then we fine tuned the heck out of the beam pattern. Extremely smooth and progressive light field from the front of your tire all the way to where you are looking. We also added sidemarker lights to help with visibility from the side, much like on cars. We've incorporated our quick-release fiberglass-reinforced nylon mount that we, ahem, “borrowed” from those clever camera guys to keep everything pointing in the right direction and easy to put on and take off with one hand. We do have a custom mount solution to fit underneath most bike computers for that clean and tucked look: Quick Release Action Camera Adapter Proudly and capably made just down the road in Chicago IL. In The Box - Detour Road Bicycle Light - Quick-Release Bar Mount (fits 31.8mm and 35mm bars) - USB-C to USB-A Charge Cable - 2.5mm Hex Wrench - Instructions Specs and Instructions - Mounting Location: Handlebar - Application: Front Bike Light for Road/Gravel and commuting - Runtime: (see runtime charts) - Charging: USB-C with Pass-Thru Charging (0 to 80% in 2 hours) - Lumens: Approximately 1200 - Battery Capacity: 3.6V 5000mah (18.0 Wh) - Weight: Lighthead = 150g, Quick Release Mount = 36g Adaptive Mode What is adaptive mode? Nothing too fancy, it is just the default mode when the light is turned on. It stays on high for about 5 minutes, and over the course of 30 minutes it will very slowly reduce brightness to medium mode while your eyes ADAPT to the darkness. Letting you get more runtime, without noticing a thing by tricking your brain. All other modes are solid output so you know what you are getting at any time.

Portal, one of the scariest trails in the Southwest USA. Honestly we have no big story behind the name, it sounds cool and its a wicked trail that we love, so why not make our latest and greatest helmet light pay homage to that famous trail? - Amazingly smooth beam pattern designed to slot between the insane width of Trail Evo, but a wider beam than our beloved Hangover. - Self-contained battery, ZERO wires with a large 21700 lithium ion cell (same as found in Rivians) to power Portal through the night. - USB-C quick charging so you can hit the trail at the last minute, and not have to spend an entire day waiting to charge your light. - Simple user interface since you don’t want to be stuck in the woods wondering why your light won’t turn on! (hint: we don’t have a lockout mode). - Lightweight, tucked close to your helmet, so you forget you are riding at night with how effortless it feels. - Dead reliable, backed by a 3-year warranty and incredible customer service so you can feel confident every time you hit the trail. - Bring another level of excitement to your rides, making the same-old trails thrilling again. - Incredibly fast shipping straight from our production floor to you. - Designed, engineered, assembled, and shipped from Chicago, IL. What's in the Box: - Portal Bike Helmet Light - USB-C to USB-A charging cable (USB-C to USB-C available separately) - Instruction Manual - Curved Action Camera Mount - Flexible Wide Mount Specifications: - Mounting Location: Helmet & Handlebar (with separate handlebar mount, coming soon) - Application: Helmet light for all biking types (Mountain, Commuting, Road, Gravel) - Runtime: See Runtime Tab - Charging: USB-C with Pass-Thru Charging - Lumens: 1650 Lumens on High, 500 on Medium, and 250 on Low. - Battery Capacity: 3.6V 5000mah (18.0Wh) Weight: Lighthead = 170g, Action Camera Mount = 20g Adaptive Mode - What is adaptive mode? Nothing too fancy, it is just the default mode when the light is turned on. It stays on high for about 5 minutes, and over the course of 30 minutes it will very slowly reduce brightness while your eyes ADAPT to the darkness. - Letting you get more runtime, without noticing a thing by tricking your brain. - All other modes are solid output so you know what you are getting at any time. Mounting to your Helmet - Helmets are like snowflakes, none are the same, and this makes mounting a challenge. No fear though. We ship Portal with a standard curved Action Camera Adapter, but also include a flexible wide mount that can adapt to almost every type of helmet out there.

Extra USB C-to-A cable that comes with Hangover and Trail Evo. We designed this plug not to be some proprietary plug to force you into our eco-system or anything. It was designed so that it could seal the light while you utilize pass-through-charging. We don't want to make a killing on this, so this is literally what the cord costs us after manufacturing, shipping, warehousing, etc. Extra long at 36" because no one likes being tethered to a charger, as well as giving you the option to have a battery pack at the bottom of your backpack or hip pack and charge lights like the Trail Evo or Hangover while in use.

Customized base mount for those helmets that have a vent down the center, making a typical action camera mount impossible to use. This spans that gap. See Outbound Lighting's website for helmet compatibility: https://www.outboundlighting.com/collections/batteries-adapters-accessories/products/wide-helmet-mount-base

Want a helmet light that is actually a light designed for helmets? Not just a flashlight? Then you've come to the right place Hangover borrows its name from the famous trail in Sedona, AZ (not the dreaded “brew flu”). Into it, we poured every ounce of our automotive optics knowledge, creating the most compact, bike light anywhere. But slim does not mean dim. Some serious late-night thinking went into the Hangover, with countless hours prototyping the perfect beam pattern for trail riding and for helmet mounting. The resulting optics fills your entire field of vision with light, not just a spot down the trail. So, you can avoid what you want to miss, and hit what you really want to shred. Good for 90 minutes of strong output, with the ability to USB speed-charge on the go, and yet only 100 grams. USB-C quick charge 3.0 is included as standard. These lights are proudly and expertly made right here in Chicago, with the help of good coffee, homegrown talent, and a couple of dogs in the shop.

Customized base mount for those helmets that have a vent down the center, making a typical action camera mount impossible to use. This spans that gap. Helmets that we know work well with this mount are: Bell 4Forty MIPS Bell Drifter MIPS Bell Formula Bell Nomad 2 MIPS Bell Sidetrack II Bell Sixer Bell Super Air R Bell Super Air Spherical Bell Super DH Bell Z20 Bontrager Blaze WaveCel Mountain Bontrager Circuit WaveCel Road Bontrager Quantum MIPS Bontrager Ralley WaveCel Mountain Bontrager Solstice MIPS Bontrager Specter WaveCel Bontrager Starvos WaveCel Round Fit Bontrager Velocis MIPS Road Bontrager XXX WaveCel Road Giro Cinder MIPS Giro Ember MIPS Giro Fixture MIPS Giro Hale MIPS Giro Helios Spherical Giro Hex Giro Montaro MIPS II Giro Radix MIPS Giro Register MIPS Giro Source MIPS Giro Switchblade MIPS Giro Trella MIPS Giro Vasona MIPS Giro Verce MIPS iXS Trail Evo iXS Trail XC iXS Trigger AM Kali Alchemy Kali Cascade Kali Invader Kali Lunati Kali Uno Kask Caipi Lazer Coyote MIPS Lazer Impala MIPS Lazer Z1 MIPS POC Axion POC Kortal POC Octal POC Tectal POC Ventral Smith Convoy Smith Network Smith Persist Smith Signal Smith Trace Specialized Prevail 2 Specialized Prevail 3 Specialized Prospero III

Behold the Trail Evo. The sum total of our decades of experience designing automotive optics, all neatly wrapped up in the best bike light we have ever engineered. Featuring a panoramic, perfectly even beam pattern that we fine-tuned the heck out of to meet the demands of trail riding. With a smooth falloff all around you to aid peripheral vision (the beam should fall off, not the biker). With it we created a literal wall of light that illuminates your entire field of view. A quick-release fiberglass-reinforced nylon mount that we, ahem, “borrowed” from those clever camera guys to keep this bike light pointing in the right direction. Good for 150+ minutes of strong output and, should you need it, the ability to USB-C quick charge on-the-go. Proudly and capably made just down the trail in Chicago IL. What’s in the Box: - Trail Evo - Quick-Release Bar Mount - USB-C to USB-A Charge Cable - 2.5mm Hex Wrench - Instructions When we launched the Trail Edition back in 2017 it was a game changer for bike lights. A beam pattern specifically designed for mountain bike riding with a wide evenly illuminated distribution. However it required an external battery pack, and we had lots of customers wanting to go wireless. So we took the best parts of Trail, and evolved it into the Trail Evo. Bringing a long lasting, even brighter, even wider beam pattern to your handlebars, without any external cords. Read on for more nerdy design details! Advanced Optical Engineering When we developed Evo’s beam pattern, we knew we could go wider and brighter, so we redefined our illumination goals, target candela points, beam angles, and then went to work simulating, testing, prototyping and developing the most seamless pattern we've built to date. The extreme width is thanks to the finely tuned blended Total Internal Reflection (TIR) optics. Hundreds of simulations with Lucidshape software let us squish, squeeze, stretch and shape the light to hit that perfect balance of peak brightness, smooth falloff and insane peripheral coverage. Check the slider comparison below to see the difference between a fine tuned optical instrument such as Trail Evo vs a name-brand light that has been around for years. The difference is staggering in person. USB-C Pass-thru Charging Everyone has USB charging ports all over nowadays, so we make sure you can use any of them with the Trail Evo, including almost all QC 3.0-rated chargers for super fast recharge times. But we took that concept one step further and added Pass-Thru Charging (PTC) to allow you full access to all output modes of your light while charging from an off-the-shelf USB Power Bank, so that you can extend runtime for those epic adventures, without limiting the light available to you (bikepackers rejoice!). We even customized the included USB-C cable to seal against the elements when plugged in so you don’t need to worry, just ride. Rock Solid Mounting A good light isn’t so good if it’s bouncing up and down on the bars all the time. That’s why we made a bolt-on clamp mount for Evo so it’s solidly locked to the bar, With a simple shim it adapts from 35mm to 31.8mm bars and the beam won’t shake around like lights with rubber strap mounts do. We adapted an established camera tripod mount concept then miniaturized it for slick snap-in installation with a ramped-cam that always takes up the slack as it wears, so you never have a rattly interface, and an easy one-handed quick-release process to pop the Evo off post-ride to charge. Simple User Interface Few people read instruction manuals, even fewer want to, so we keep our lights dead simple so that you don’t need an advanced degree to remember some complicated sequence of button presses get to the mode you want. Evo’s soft-touch overmolded top shell has a single, large button right in the middle that’s easy to feel through a thick winter glove in the dark, with four green indicators to clearly convey mode and battery status without the need for a decoder. Four simple modes cover the majority of use cases from set-it-and-forget-it pedally XC to long-climb-fast-descent Enduro rides – Adaptive / High / Medium / Low – and no SOS or seizure inducing strobes stuck in between. Electrifying design We like to keep our lights simple on the outside for the user, but that doesn’t mean we’re skimping on the guts inside. The constant-current driver maintains rock solid regulation through the Cree XD16 LEDs over the entire voltage range of the genuine Samsung 21700 cells with a unique battery monitoring algorithm to give you accurate feedback without interruption. Complete with fast QC 3.0 USB-C charging and Pass-Thru capability to boot, we engineer the electronics to maximize efficiency and runtime while minimizing charge times, all without any proprietary connectors that could leave you stranded. Thermal Engineering LED lights get hot, that's a fact of life. One of ou

Have multiple bikes? Want to swap Trail Evo or Detour between them often? Here ya go. Fits 35mm and 31.8mm handlebars. Now updated in Q2 2021 with improved fit and finish, better angle adjustments, and smoother lever action. Updated again in Q4 2021 with a thumbscrew to make adjustments on the trail tool-free. ?? If you have a broken Evo mount, please contact us before buying another!

This is the ultimate bike light setup. Trail Evo on the handlebars for that up-close and mid-range fill light, Hangover on your bike helmet that gives a wide but punchy light throw that with their powers combined, creates the Evo Downhill Package. This system together outperforms ANY single high power lamp on the market. More importantly? No wires. No one wants that anymore for their bike lights, let's be real. Engineered & assembled in Chicago, IL! Package Includes: - Trail Evo bike light for the handlebar with a quick release mount - Hangover for bike helmet, with a GoPro mount installed - Customized USB-C to USB-A charging cables Specifications - Mounting Location: Handlebar and Helmet - Application: Bike Light package for Trail Riding - Runtime: (see runtime charts) - Charging: USB-C with Pass-Thru Charging (0 to 80% in 3 hours for EVO, 0-80% in 60 minutes for Hangover) - What’s in the Boxes: Trail Evo: Quick-Release Bar Mount, USB-C to USB-A Charge Cable, 2.5mm Hex Wrench, Instructions, Hangover: Quick-Release Action Camera Mount, Curved Helmet mount with adhesive pad, USB-C to USB-A Charge Cable, Instructions - Lumens: Approximately combined 3000-3100 - Battery Capacity: 3.6V 3500mah (12.6 Wh) for Hangover, 3.6V 10,000mAH (36.0wH) for Trail Evo. - Weight: Evo = 275g + 36g mount, Hangover = 105g + 20g mount

So many of you wanted to be able to mount our lights underneath your bike computers that we created this nifty little adapter. All the guts of our Quick Release Handlebar Mount that comes with Detour and Evo, but to work with an Action Camera mount. This works with our Detour light the best. This can work upside down or right side up, there is no wrong way, the light will always be positioned correctly.

Shim for the Quick Release Handlebar Mount to adapt to 22.2mm or 25.5mm handlebars.