Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Your Search: "silca"

$145.00
Two stage gauge gives you accurate readings between 0-30 and 30-110. Perfect for all of your road and off road adventures. Specifications • Two stage gauge • Lightweight and durable aluminum barrel • Full-size Ash wood handle with hose guide • Locking aluminum Presta/schrader chuck with bleed button • Rated to 120 PSI Description In 1988 SILCA noticed the growing MTB market in the US and began developing a high volume pump with low pressure gauge to meet the needs of this completely new category of bicycle. Named the Terra, it was the first of it's kind, high volume, low pressure specific pump for larger volume tires. Now, 34 years later, SILCA reintroduces the Terra concept with new and exciting technology that allows it to be not only the world's most refined low pressure pump, but also to maintain high pressure capabilities as well. Using a revolutionary new non-linear gauge scale technology, the Terra pump uses custom gauge internals to create a gauge which allows for 0.5psi precision at the low end of the range climbing to 2psi precision at the high end of the range (120psi). This unique design allows for a gauge with 120psi overall capability, yet 50% of the gauge face contains 0-30psi (0-2.1bar). Terra maintains SILCA's famous all metal construction with lathe turned Ash wood handle, but breaks the traditional SILCA mold with a unique lever operated chuck based on SILCA's own award winning Tattico mini pump chuck design. This full metal chuck uses a threaded reversible end cap to switch between presta and schrader and contains an inline pressure bleed button.
$24.00
Eliminate the need for any harsh cleaners or degreasers to wax your chain. Drop a single StripChip square into your hot wax, let your chain wax for 10 minutes, and hang to dry. Reuse the same pot of wax for future waxings. Specifications: - Oleogelation wax based formula - Eliminates the need for harsh degreasers - Use one chip per new chain with factory grease - Turns the grease into a wax like substance - No drop in performance - Go from chain in factory package to waxed chain in 10 minutes Description: No More Degreasing Prep: StripChip eliminates the need for degreasing new factory chains. With StripChip, it’s straight into the hot wax for simple chain preparation. Advanced Technology: Each StripChip degreasing additive piece binds with factory grease found in new chains, turning it into wax. SILCA’s advanced technology saves time and expense while ensuring a clean, quiet, and ultra-efficient drivetrain. Convenient Form: StripChip is sold in a candy bar-like form, with each bar containing six pieces (12 grams each). Using one piece per chain effectively eliminates factory grease, allowing hot melt wax to penetrate the inner workings of chain pins and rollers. Simple Application: Integrated seamlessly with the SILCA Super Secret Chain Blend Hot Melt Wax, StripChip ensures a straightforward application process. Follow easy steps for optimal results, making chain maintenance simple and hassle-free. Optimized Performance: StripChip works best with SILCA Super Secret Chain Blend Hot Melt Wax, ensuring the fastest and longest-wearing drivetrain. Experience enhanced performance, reduced friction, and minimized wear with every ride.
$55.00
TATTICO is a highly-efficient mini-pump with an ergonomic design that makes it easy to use in all conditions. Who's it for? The discerning road and adventure cyclist who requires efficient and dependable inflation when completing a road or trailside tire repair. TATTICO works on both Presta and Schrader valves. TATTICO has 4 unique features: - Inverted Design: TATTICO is designed backwards from most pumps. The hose and valving is hidden inside the inner tube rather than the outer cylinder delivering up to 10% more air per stroke compared to pumps of similar length. - Adaptable Cup Seal: Other pumps seal with o-rings which lose effectiveness as friction heat increases. The TATTICO Adaptable Cup Seal grows with the tube resulting in ultimate efficiency at all temperatures. - Hidden Heat Sink: There is a heat sink hidden at the end of the barrel which absorbs a high percentage of heat generated when pumping. This keeps the rest of the pump cool, even at high pressures. - Twin Tube Insulated Grip: TATTICO handle uses 2 thin tubes separated by an insulating air gap to keep hands cool. This results in better grip and control without risk to hands even when inflating multiple tires to high pressures. Specifications: - 6061 Alloy barrel and gripping surfaces - High efficiency piston design - Long extractable filler hose with locking presta/schrader chuck - 100psi - 9-1/2" length - Includes direct-mount bracket with retaining strap
$36.00
The YPSILON (pronounced ip.si.lon) is SILCA’s take on the unassuming Y-wrench. Most tools in this layout feature 4mm, 5mm and 6mm keys; meaning that the wrenches for some of the most common use cases in cycling are readily available in one tool. The shape of the Y-wrench also offers superior control and stability over traditional hex keys, especially in tighter work spaces. WHO'S IT FOR? Uncompromising cyclists and mechanics alike who obsess over every fine detail and desire a versatile Y-wrench. WHY WE DESIGNED IT: Ypsilon was designed by a team of engineers and mechanics who obsess over improving products. The body of the tool is constructed using a composite polymer with soft over-mold grips. Unlike traditional Y-wrench designs, YPSILON is customizable and adaptable to the mechanic’s preferences. This is accomplished by using a ¼” bit collet with magnetic bit attachment in place of a fixed 6mm hex. This departure from the traditional Y-wrench design was inspired by the versatility of our T-Ratchet + Ti Torque kit. The YPSILON can easily transform into any required ¼” based tool by swapping out the bit. SPECIFICATIONS: - High strength CrV steel spine leading to 4mm and 5mm hex - Lightweight composite polymer body with ergonomic grips - ¼” bit collet with magnetic bit attachment
$9.00
Replacement gasket for reversible brass chucks, modern Impero Frame Pumps, and Pocket Impero
The ultimate in Marginal Gains for when all out speed is the priority. Partnering with the Nobel Prize winning scientists who discovered graphene, we are the only company certified to be using Nanene® in chain wax. Specifications: - Saves up to 12w - Save half a watt over Secret Chain Blend - 300g - Up to 800km re-wax intervals - Clean to the touch on the chain - No PFAS chemicals - Get up to 30,000 km out of a chain Description: During the development of Secret Chain Blend Hot Melt chain wax, Josh put considerable effort into looking at all possible friction modifiers including Graphene. Sadly, he found that this ‘wonder material’ generally made little to no difference in performance despite it’s very high price, how could this be? So in an attempt to get to the bottom of this Josh went directly to the original source of graphene, Versarien® PLC, a company formed from the partnership between the University of Cambridge and the University of Manchester (where graphene was discovered) and is one of only three graphene producers in the world to be certified by the Graphene Council as producing true graphene. Versarien® produces the highest purity graphene in the world which they call Nanene™. “From our first test with Nanene™, we knew that real Graphene was indeed, the future.” Says Josh Poertner, President of SILCA. “Everything we could throw at it showed it excelling over our existing technologies, and that says a lot when our Secret Chain Blend Hot Wax is already considered to be the fastest and lowest wearing lubricant in the world as independently tested by numerous third party laboratories including ZeroFrictionCycling and Tour Magazin Germany. As a core part of our product development, SILCA have also entered into a partnership with the Ray Ewry Sports Engineering Center (RESEC) at Purdue University just up the road from SILCA headquarters. The RESEC is lead by Jan-Anders Mansson former President of the International Academy of Sports Science and Technology (AISTS), an International Olympic Committee (IOC) co-founded organization. RESEC is an engineering-based sports research center focusing on next generation technologies impacting the sports field. RESEC is also currently developing multiple technologies for measurement of drivetrain efficiency, as well as standardization of smart trainers for E-racing in collaboration with UCI.
$9.00
The factory replacement for SILCA Press on Disc Chucks. The 252 replace the classic SILCA 25.1 gasket after more than 20 years in the market. This unique gasket borrows from industries which require air-tight seals in the harshest of environments. The 252 gasket utilizes a high tech, full synthetic elastomer base material. It tests to a life expectancy of more than 5X the carbon filled rubber or Buna-N materials used previously. In tests with a major disc wheel manufacturer, the current SILCA Disc Wheel Adapter with 252 gasket excelled by posting a blow-off pressure of 393psi where other designs were unable to reach 120psi. Older versions of the SILCA Disc Wheel Adapter will still benefit for the new gasket, but have a lower hands-free max pressure.
$12.00
This chuck comes from the same vendor who supplied them to SILCA pumps for more than 25 years. It makes a great replacement or addition if you are buying a new Stainless Presta chuck or CP1 Disc Adapter for your older pump. This part is made from nickel-plated brass and uses an o-ring to seal the connection. - Hose barb fits into all SILCA hoses both old and new - Threads onto Schrader valves and all SILCA chucks with male Schrader threads (17-4 Presta chuck, HIRO, and CP1 Disc Adapter) - All metal construction, nickel-plated brass
$46.00
Named after the Italian word for Brick, Mattone is a water-resistant, ultra-compact seat bag that attaches to the rails using the BOA® Closure System. Unique zipper design allows it to be accessed while on the bike, or to open like a book when removed from the bike for easy access. Who's it for? Mattone is for the cyclist looking to carry a spare tube, CO2, Multi-Tool, and some cash in a discrete, water-resistant package. Internal divider holds ID, credit card or cash while also protecting your tube from your multi-tool! WHY WE DESIGNED IT: Seat bag users fall into two categories: Seat Roll aficionados and seat bag users. Traditionally, seat bags have been simple open spaces that allowed content to jangle about, making noise and rubbing against each other. Often times a spare tube was pulled out of a seat bag to reveal it was more full of holes than the tube being replaced due to friction against a house key or multi-tool. With Mattone, we designed a layout similar to a book, where the bag can fully open to hold the tube and CO2 cartridge on one side, separated by a padded ballistic nylon ‘page’ separating it from the other side where you can store an inflator head, multi-tool, contact lens case, etc. The ‘page’ also contains a slot for a credit card, ID, money, or house key. The unique off-center Aquaguard Zipper allows the case to completely open and lay flat when off the bike, while also allowing easy access to the multi-tool and money/card slots when on the bike without risk of spilling all the contents of the bag. A high friction Hypalon strap with BOA® Closure completes the package. Making more than 15x the power of Velcro®, the BOA® Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the Mattone will remain ‘high and tight’ under your saddle until you need to access it... no swinging, swaying, or rattling... ever. SPECIFICATIONS: - Exterior - Sleek black finish with reflective graphics - Interior - Hi-contrast red material with separate ID, credit card or money flap - Interior Volume - Holds one inner tube, one CO2 cartridge, one tire lever (all of these components are sold separately and are not included) - BOA® Closure System with open guide release on Hypalon retaining strap - YKK Aquaguard® zipper - Outside Dimensions: 13cm x 8.5cm x 5.5cm - Volume: Approximately .61 L - Strap Measurements: 27cm x 4.5cm
$36.00
The YPSILON (pronounced ip.si.lon) is SILCA's take on the unassuming Y-wrench. Most tools in this layout feature 4mm, 5mm, and 6mm keys; meaning that the wrenches for some of the most common use cases in cycling are readily available in one tool. The shape of the Y-wrench also offers superior control and stability over traditional hex keys, especially in tighter workspaces. Ypsilon was designed by a team of engineers and mechanics who obsess over improving products. The body of the tool is constructed using a composite polymer with soft over-mold grips. Unlike traditional Y-wrench designs, YPSILON is customizable and adaptable to the mechanic's preferences. This is accomplished by using a 1/4" bit collet with magnetic bit attachment in place of a fixed 6mm hex. This departure from the traditional Y-wrench design was inspired by the versatility of our T-Ratchet + Ti Torque kit. The YPSILON can easily transform into any required 1/4" based tool by swapping out the bit. - High-strength CrV steel spine leading to 4mm and 5mm hex - Lightweight composite polymer body with ergonomic grips - 1/4" bit collet with magnetic bit attachment
$80.00
Never lose a bottle again with these incredible rainbow titanium bottle cages. This lightweight design doesn't mark your bottles, allows easy access, and holds your bottles on the worst terrain. In our quest to create the ultimate bottle cage, we found ourselves completely fascinated by the look, feel, and durability of tubular titanium construction. This combination of design characteristics produces a cage that has better retention on gravel and other harsh surfaces and has proven to be the superior design when mounted on the underside of the down tube, so common in adventure riding and touring. While classic in appearance, this material, and its manufacturing are as complex and high tech as it gets. Cleaning and care: Oils from your hands and fingers can change the anodized color. To revive color and/or clean the cages (and straws), use rubbing alcohol and a soft cloth. Do not use abrasive products, this will damage the anodized finish. Please note that anodized titanium is only as hard as the titanium itself, and is less hard than many types of sand or abrasives found in sand and soil, including aluminum oxide and garnet which are naturally occurring and are harder than steel. Titanium anodize continually exposed to abrasion by these sand materials will eventually scratch and begin to wear and will not be covered under warranty. Routine cleaning of the cages and cleaning of bottles is recommended to remove any embedded abrasive particles which can accelerate this wear. Specifications - Single Cage - Rainbow anodized finish - Seamless 3-2.5 titanium tubing - 30 g - 21mm fore/aft adjustment - Hand bent in Indianapolis - Easy in-and-out - Extremely secure design - Laser welded - Optimized for purist bottles
$9.00
If you have a SILCA PISTA made since 1946, a SUPERPISTA since 1989, or any of the Impero Frame Pumps since 2015, it has a check valve assembly like this to ensure that air can only go in one direction
$36.00 - $144.00
Completely strip and prep your chain for wax in 10 minutes. Submerge the chain or even just drip it on the chain, rinse, and apply super secret. Take all the work and harsh chemicals out of chain waxing! Specifications: - Biodegradable ingredients - Cleans chain in 10 minutes - Improves wax treatment adhesion - Strip chain on or off bike - Made in USA Far and away, the largest hurdle for people converting to a waxed drivetrain has always been the need to completely strip the factory lubricant from the chain in order for the wax to properly adhere. Traditional methods have involved using 2-3 different solvents and rinse steps, moving from non-polar solvents that thin greases and oils to progressively more polar solvents that evaporate quickly to eliminate residues. For the design of SILCA Chain Stripper, we started from the end and worked backwards, identifying chemicals which drive out greases and oils while promoting wax adhesion to metal. The result is an organic cleaner that lifts and encapsulates greases and oils allowing them to easily be rinsed away from the metal surface. The result is the world's first wax optimized chain cleaner which not only removes greases and oils, but actually primes the metal surface for improved adhesion from wax lubricants. The aggressive 'lift and encapsulate' action of SILCA chain stripper allows for 2 quick and easy cleaning options. Option 1: For hot-melt waxing a new, factory chain with SILCA Secret Blend Hot Melt, simply immerse the chain in the Stripper and agitate 30 seconds. Allow to sit for 5-10 minutes and agitate again for 30 seconds. Remove the chain from the Stripper and rinse with water and then drop the chain directly into the hot wax, the water will boil off within a few minutes and the chain will be fully waxed with up to 30% longer application life than a chain cleaned by traditional methods. Option 2: For drip applied waxing of a new or nearly new chain with SILCA Super Secret without removing the chain from the bicycle. Apply 1 drop of SILCA Chain Stripper to each roller of the chain while backpedalling. Allow to soak for 5 minutes. Backpedal 10 revolutions of the crank to agitate cleaner and re-apply 1 drop per roller allowing to sit for 5 more minutes. Rinse with clean water while backpedalling at least 10 revolutions.
$40.00
The Italian Army Knife, a very SILCA take on the traditional multi-tool. We've addressed the things that frustrate us with conventional multi-tools, while keeping the layout that fits conveniently in the SILCA EOLO Wallet or Seat Roll Premio. The mid-length tool design is long enough to provide access to recessed fasteners, but short enough not to experience twist or damage under moderate torque as can happen on longer tools. All tools are forged rather than bent from hex stock. While this method of construction is more expensive, the value is unquestioned during a road-side repair. Mid-length tools also allow us to position the tools within the same plane, reducing the thickness of the overall package by half. Double-chromed tools and fully stainless steel hardware and bushings guarantee a long life without corrosion (the number 1 killer of multi-tools is corrosion). Forged aluminum sidebars contain rare-earth magnets for holding a spare chain connector. - Forged and machined sidebars with integrated chain-connector storage. - Tredici (Tre-dee-chee) 13 forged and plated tools: Hex 2/2.5/3/4/5/6/8 + Torx 10/20/25 + PH2/Flat + DiscPadSpreader. - 8mm adapter connects to the 5mm hex for optimal use of space. - Stainless steel pivot hardware - 98 grams
$35.00
The Italian Army Knife, a very SILCA take on the traditional multi-tool. We've addressed the things that frustrate us with conventional multi-tools, while keeping the layout that fits conveniently in the SILCA EOLO Wallet or MATTONE. The mid-length tool design is long enough to provide access to recessed fasteners, but short enough not to experience twist or damage under moderate torque as can happen on longer tools. All tools are forged rather than bent from hex stock. While this method of construction is more expensive, the value is unquestioned during a road-side repair. Mid-length tools also allow us to position the tools within the same plane, reducing the thickness of the overall package by half. Double-chromed tools and fully stainless steel hardware and bushings guarantee a long life without corrosion (the number 1 killer of multi-tools is corrosion). Forged aluminum sidebars contain rare-earth magnets for holding a spare chain connector. - Forged and machined sidebars with integrated chain-connector storage. - Nove (No-vay) 9 forged and plated tools: Hex 2/3/4/5/6/8 +Torx 25 +PH2/Flat - 8mm adapter connects to the 5mm hex for optimal use of space. - Stainless steel pivot hardware - NOVE- 79 grams
$275.00
This third-generation Silca SuperPista combines all of the handcrafted elements which have made SuperPista the go-to pump of the ProTour for more than 30 years, with our two most mechanic and consumer requested features: a high accuracy digital gauge, and gauge readout located at the top of the barrel for easier reading. Who's it for? The data-driven cyclist requires a highly efficient floor pump suitable for all tire pressure applications. Why we designed it: With specifications more akin to a suspension fork than a traditional pump, the SuperPista combines a full metal shock piston design with the classic Italian leather plunger washer and self-lubricating linear bearings to create the highest efficiency, smoothest running SuperPista to date. Efficient, accurate, durable are the trademarks or the SUPERPISTA DIGITAL floor pump. Specifications: - High-mount digital gauge accurate to 1% with backlight, adjustable pressure alarm and adjustable pressure units (uses two CR2032 batteries) - Full-size Ash wood handle with secure carrier strap - High-efficiency 28mm SILCA leather piston assembly - Brass air check-valve assembly - Alloy barrel with plated steel piston shaft - Long filler hose with integrated Schrader chuck - Hiro locking-lever Presta chuck with magnetic dock - Rated to 220psi
$499.00
While "good enough" gets the job done, there is beauty in going above and beyond. The SILCA SuperPista Ultimate is the pinnacle of what a floor pump can achieve. From the highly accurate analog gauge to the magnetic HIRO dock to the lathe-turned Purpleheart wood handle, this floor pump embodies the SILCA mantra of passion, precision, performance. - Full Stainless Steel, Aluminum, Wood and Brass Construction—NO PLASTICS - SILCA Lifetime PLUS Shield Warranty—the most comprehensive warranty in all of Cycling - Ergonomic Purpleheart wood and Investment Cast Stainless Steel Handle - Full IGUS Linear Bearings for Ultimate Smoothness - Thick Full Grain Leather Piston Gasket—More Efficient and Durable than Rubber! - 1% Gauge Accuracy allows for Ultimate Ride Tuning
$55.00
The Italian Army Knife VENTI builds on the flat design, forged mid-length tools, and Stainless Steel hardware of our award-winning line of Italian Army Knives. Adding new tools including the most ergonomic and functional chain breaker ever featured in a portable multi-tool, the VENTI has everything you need. The unique magnetic slide-lock design of the VENTI chain-tool allows it to be more than twice as long as other designs for exceptional ergonomics in use, while also allowing it to be removed completely from the tool for improved functionality. The forged mid-length tools are long enough to reach all common cycling fasteners, but not so long that they twist or deform under load. The ergonomic side plates also hold a discreet magnetic storage feature for a spare master link and all tools are coated with SILCA's unique high-grip chrome plating which provides better torque transfer at the bolt interface. - Metal injection sidebars with knurled grip surface and stainless steel hardware - Forged chain breaker for 10-12 speed chain - Magnetic storage for 10-12 speed compatible chain connectors - Forged and plated tools: - Hex 2/2.5/3/4/5/6/8 - Torx 8/10/20/25 - PH2/SL4 - 7mm box wrench - 8mm flare nut wrench - 10mm open-end wrench - Disc pad spreader - Valve core remover - Spoke wrenches—13G / 15G - 172 grams
$150.00
Hirobel is a specially designed clamp for bicycle repair stands that makes it easier to work on your bike. It better distributes stresses and loads through the bicycle frame, offering superior stability while eliminating possible crushing or damage to thin-walled and shaped tubing. The pressure clamps used on contemporary workstands were developed for round steel tubing more than 40 years ago, predating carbon fiber, aluminum, aerodynamic and oversized tube shapes, integrated seat masts, dropper posts, and suspension systems. These legacy designs assume your bicycle tubing to be both round and straight, and when it is not, the clamp can impart very high point loads at the clamp edges causing finish damage, internal carbon layup damage, or outright crushing of tubes on the lightest designs. With Hirobel, specially shaped, paint-friendly cones and bindings cradle the frame at the tube intersections, where wall thicknesses are higher and forces can be distributed over much larger surface areas. Adjustable and adaptable for any possible frame design, the Hirobel also allows the repair stand clamp to be located closer to the bicycle center of gravity. This improves stability and eliminates bouncing of the bike during heavier work while also locating the drivetrain consistently higher for the mechanic, improving visibility while reducing back strain.
$55.00
Similar to the original MATTONE, a high friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the MATTONE will remain 'high and tight' under your saddle until you need to access it... no swinging, swaying, or rattling... ever
$20.00
n partnership with the rubber and tire experts at Continental , we are offering a custom extruded 3/16" ID air hose compatible with all historic PISTA Handles.
$85.00
Few tools are used as frequently and can cause as much heartache or wasted time as the seemingly simple Hex and Torx keys. It's one of the first things you notice at the top levels of motorsport tools, or in the toolboxes of Pro-Tour mechanics: extremely high-quality tools. The reasoning is simple, better tool fit leads to better feel and confidence for the mechanic as well as a significant reduction in the likelihood of damaging exotic fasteners made from titanium or aluminum. - High-strength S2 steel tools - Precise tool interface dimensions - Polymer coating for superior grip - Laser-etched size indication - Compact tool holder - Hex Wrenches: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm - Torx Wrenches: T7, T8, T9, T10, T15, T20, T25, T27, T30 - PLEASE NOTE: The T7 tool features a 100-degree bend rather than a 90-degree for improved control and access to very small fasteners
$9.00
The Iconic SILCA 24.1 gasket is the heart of the press-on Presta chuck. The current 242 gasket utilizes a high tech and very red, fully synthetic elastomer base material.
$85.00
Never lose a bottle again with these incredible unicorn titanium bottle cages. This lightweight design doesn't mark your bottles, allows easy access, and holds your bottles on the worst terrain. - Single Cage - Unicorn anodized finish - Seamless 3-2.5 titanium tubing - 30 g - 21mm fore/aft adjustment - Hand bent in Indianapolis - Easy in-and-out - Extremely secure design - Laser welded - Optimized for purist bottles In our quest to create the ultimate bottle cage, we found ourselves completely fascinated by the look, feel, and durability of tubular titanium construction. This combination of design characteristics produces a cage that has better retention on gravel and other harsh surfaces and has proven to be the superior design when mounted on the underside of the down tube, so common in adventure riding and touring. While classic in appearance, this material, and its manufacturing are as complex and high tech as it gets. Cleaning and care: Oils from your hands and fingers can change the anodized color. To revive color and/or clean the cages (and straws), use rubbing alcohol and a soft cloth. Do not use abrasive products, this will damage the anodized finish. ?Please note that anodized titanium is only as hard as the titanium itself, and is less hard than many types of sand or abrasives found in sand and soil, including aluminum oxide and garnet which are naturally occurring and are harder than steel. Titanium anodize continually exposed to abrasion by these sand materials will eventually scratch and begin to wear and will not be covered under warranty. Routine cleaning of the cages and cleaning of bottles is recommended to remove any embedded abrasive particles which can accelerate this wear.
$125.00
Roughly 70% of damage to high-end carbon components like seat posts, handlebars, and stems happen when making adjustments without using torque measurement. This problem is accentuated by the majority of adjustments occurring on the roadside or trail-side. T-Ratchet + Ti-Torque solves these problems by delivering a highly ergonomic tool with a torque measuring extender that provides real-time feedback as you are tightening the fastener. The Ti-Torque beam has three separate scales on it, 2-6, 3-5, and 4-8, which allow you to easily see when you've reached your desired torque setting. Ti-Torque weighs in at a mere 30 grams meaning you'll hardly notice it's there until you need it. The T-Ratchet uses interchangeable magnetic components to convert from a screwdriver to a ratchet, to a ratcheting T-Handle in seconds, which gives the user the ability to have several tools at once in an extremely small package. - Ti-Torque beam with three separate scales for measuring 2-8Nm - Precision ratchet with convertible magnetic extension - Steel bit extender - S2 steel Hex bits: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm - S2 steel Torx bits: T10, T20, T25 - S2 steel 2mm Phillips head bit - Duck-waxed canvas carrying case measuring 120mm x 70mm x 30mm - Kit weight: 220 grams
$85.00
Never lose a bottle again with these incredible royal purple titanium bottle cages. This lightweight design doesn't mark your bottles, allows easy access, and holds your bottles on the worst terrain. Specifications • Single Cage • Royal Purple anodized finish • Seamless 3-2.5 titanium tubing • 30 g/cage • 21mm fore/aft adjustment • Hand bent in Indianapolis • Easy in-and-out • Extremely secure design • Laser welded • Optimized for purist bottles Description In our quest to create the ultimate bottle cage, we found ourselves completely fascinated by the look, feel, and durability of tubular titanium construction. This combination of design characteristics produces a cage that has better retention on gravel and other harsh surfaces and has proven to be the superior design when mounted on the underside of the down tube, so common in adventure riding and touring. While classic in appearance, this material, and its manufacturing are as complex and high tech as it gets. Cleaning and care: Oils from your hands and fingers can change the anodized color. To revive color and/or clean the cages (and straws), use rubbing alcohol and a soft cloth. Do not use abrasive products, this will damage the anodized finish. ? Please note that anodized titanium is only as hard as the titanium itself, and is less hard than many types of sand or abrasives found in sand and soil, including aluminum oxide and garnet which are naturally occurring and are harder than steel. Titanium anodize continually exposed to abrasion by these sand materials will eventually scratch and begin to wear and will not be covered under warranty. Routine cleaning of the cages and cleaning of bottles is recommended to remove any embedded abrasive particles which can accelerate this wear.
$70.00
Tattico is a highly efficient mini-pump with an ergonomic design that makes it easy to use in all conditions. - Tattico has 4 unique features: - Inverted Design: Tattico is designed backwards from most pumps. The hose and valving is hidden inside the inner tube rather than the outer cylinder delivering up to 10% more air per stroke compared to pumps of similar length. - Adaptable Cup Seal: Other pumps seal with o-rings which lose effectiveness as friction heat increases. The Tattico Adaptable Cup Seal grows with the tube, resulting in ultimate efficiency at all temperatures. - Hidden Heat Sink: There is a heat sink hidden at the end of the barrel which absorbs a high percentage of the heat generated when pumping. This keeps the rest of the pump cool, even at high pressures. - Twin Tube Insulated Grip: Tattico handle uses 2 thin tubes separated by an insulating air gap to keep hands cool. This results in better grip and control without risk to hands even when inflating multiple tires to high pressures. - 6061 Alloy barrel and gripping surfaces - High-efficiency piston design - Long extractable filler hose with locking Presta/Schrader chuck - 120psi - 9-1/2" length - Includes direct-mount bracket with retaining strap
$85.00
Traditionally, mountain cleats have only had two material options. Mild steel and brass. This has largely been to ensure that the cleat wore out faster than the pedal interface, but has left us with cleats that are often times very fast wearing, and in all cases, are quite heavy. Enter 6/4 Titanium, only slightly less hard than tool or spring steel used in the pedals, it's a remarkable 2.25 times stronger and 3 times tougher than brass or mild steel. Best of all, the extreme toughness and abrasion resistance of 6Al/4V titanium means that you can expect 300-400% wear life compared to traditional materials. Now we couldn't just stop there, but by combining 3D printing technology with this material that is 1/3 lighter than steel, we are able to achieve a cleat with internal lattice structure (called a gyroid) which maintains stiffness and strength while reducing weight to create a cleat set that is HALF the weight of a standard cleat set. This savings of 25-30 grams per set of cleats is significant over time, particularly in CX events where running is crucial. 25gm reduction x 100 rpm = 180kg of mass not lifted per hour of riding, 90kg per leg!
$9.00
Replacement gasket for the SILCA HIRO Chuck
$50.00
The most advanced foam ever used in bar tape along with an extremely long wearing and tacky top layer, this is the ultimate in comfort. - 2.5mm of cushion similar dampening to 3.5mm in other tapes. - Laser engraved aluminum end plug. - Fully adhesive finishing tape. - Butterfly clamp cover that doesn't add bulk. - SILCA Crash Replacement Program
Page 1 of 2 Next page