Headlights

The PDW Kepler E-Bike Headlight works with any 6V-15V e-bike system, and it comes packed with 350 lumens and a sturdy stainless steel fork mount. The Kepler E-bike Headlight comes equipped with a Bosch-friendly plug pre-installed for quick attachment to any Bosch e-bike system. For other e-bike installations, the Bosch plug can simply be clipped off, and the light functions just the same directly wired up. - Works with 6-15V systems - Mounts to fork crown with steel bracket - Features a cut-off beam to not blind oncoming riders

The Lars Rover 810 is a USB-rechargeable headlight with a powerful lithium-ion battery and a darkness-destroying CREE LED bulb. Its precision reflector provides superior luminous guidance for up to 10 hours of ride time. The Lars Rover will run for an additional 15 minutes in low-power safety mode after the low-battery indicator light comes on. The rugged alloy construction is weatherproof and strong enough to handle the abuse of an urban commute. - 5 Modes: Steady low (6 hours), Steady medium (3 hours), Steady high (1.5 hours), Fast Flashing (20 hours), Pulse (7 hours) - Li-ion battery, CREE LED, Texas Instruments integrated circuit - Weatherproof exterior for all-season riding - One second delayed power switch to prevent accidental on/off - Light wakes up in last mode used - Micro USB charging cord included; 5.5-hour charging cycle - Includes UV-proof quick on/off handlebar mount

Customized base mount for those helmets that have a vent down the center, making a typical action camera mount impossible to use. This spans that gap. Helmets that we know work well with this mount are: Bell 4Forty MIPS Bell Drifter MIPS Bell Formula Bell Nomad 2 MIPS Bell Sidetrack II Bell Sixer Bell Super Air R Bell Super Air Spherical Bell Super DH Bell Z20 Bontrager Blaze WaveCel Mountain Bontrager Circuit WaveCel Road Bontrager Quantum MIPS Bontrager Ralley WaveCel Mountain Bontrager Solstice MIPS Bontrager Specter WaveCel Bontrager Starvos WaveCel Round Fit Bontrager Velocis MIPS Road Bontrager XXX WaveCel Road Giro Cinder MIPS Giro Ember MIPS Giro Fixture MIPS Giro Hale MIPS Giro Helios Spherical Giro Hex Giro Montaro MIPS II Giro Radix MIPS Giro Register MIPS Giro Source MIPS Giro Switchblade MIPS Giro Trella MIPS Giro Vasona MIPS Giro Verce MIPS iXS Trail Evo iXS Trail XC iXS Trigger AM Kali Alchemy Kali Cascade Kali Invader Kali Lunati Kali Uno Kask Caipi Lazer Coyote MIPS Lazer Impala MIPS Lazer Z1 MIPS POC Axion POC Kortal POC Octal POC Tectal POC Ventral Smith Convoy Smith Network Smith Persist Smith Signal Smith Trace Specialized Prevail 2 Specialized Prevail 3 Specialized Prospero III

Want a helmet light that is actually a light designed for helmets? Not just a flashlight? Then you've come to the right place Hangover borrows its name from the famous trail in Sedona, AZ (not the dreaded “brew flu”). Into it, we poured every ounce of our automotive optics knowledge, creating the most compact, bike light anywhere. But slim does not mean dim. Some serious late-night thinking went into the Hangover, with countless hours prototyping the perfect beam pattern for trail riding and for helmet mounting. The resulting optics fills your entire field of vision with light, not just a spot down the trail. So, you can avoid what you want to miss, and hit what you really want to shred. Good for 90 minutes of strong output, with the ability to USB speed-charge on the go, and yet only 100 grams. USB-C quick charge 3.0 is included as standard. These lights are proudly and expertly made right here in Chicago, with the help of good coffee, homegrown talent, and a couple of dogs in the shop.

Wireless Bike Light with a cutoff beam pattern for Road/Gravel riding Our original Road Edition set the bar high for the last several years. So we were challenged on how to improve it. Right away, we've ditched the large battery pack. This is all internal, self contained, USB-C rechargeable, and slim enough to fit in your pocket. Then we fine tuned the heck out of the beam pattern. Extremely smooth and progressive light field from the front of your tire all the way to where you are looking. We also added sidemarker lights to help with visibility from the side, much like on cars. We've incorporated our quick-release fiberglass-reinforced nylon mount that we, ahem, “borrowed” from those clever camera guys to keep everything pointing in the right direction and easy to put on and take off with one hand. We do have a custom mount solution to fit underneath most bike computers for that clean and tucked look: Quick Release Action Camera Adapter Proudly and capably made just down the road in Chicago IL. In The Box - Detour Road Bicycle Light - Quick-Release Bar Mount (fits 31.8mm and 35mm bars) - USB-C to USB-A Charge Cable - 2.5mm Hex Wrench - Instructions Specs and Instructions - Mounting Location: Handlebar - Application: Front Bike Light for Road/Gravel and commuting - Runtime: (see runtime charts) - Charging: USB-C with Pass-Thru Charging (0 to 80% in 2 hours) - Lumens: Approximately 1200 - Battery Capacity: 3.6V 5000mah (18.0 Wh) - Weight: Lighthead = 150g, Quick Release Mount = 36g Adaptive Mode What is adaptive mode? Nothing too fancy, it is just the default mode when the light is turned on. It stays on high for about 5 minutes, and over the course of 30 minutes it will very slowly reduce brightness to medium mode while your eyes ADAPT to the darkness. Letting you get more runtime, without noticing a thing by tricking your brain. All other modes are solid output so you know what you are getting at any time.

Behold the Trail Evo. The sum total of our decades of experience designing automotive optics, all neatly wrapped up in the best bike light we have ever engineered. Featuring a panoramic, perfectly even beam pattern that we fine-tuned the heck out of to meet the demands of trail riding. With a smooth falloff all around you to aid peripheral vision (the beam should fall off, not the biker). With it we created a literal wall of light that illuminates your entire field of view. A quick-release fiberglass-reinforced nylon mount that we, ahem, “borrowed” from those clever camera guys to keep this bike light pointing in the right direction. Good for 150+ minutes of strong output and, should you need it, the ability to USB-C quick charge on-the-go. Proudly and capably made just down the trail in Chicago IL. What’s in the Box: - Trail Evo - Quick-Release Bar Mount - USB-C to USB-A Charge Cable - 2.5mm Hex Wrench - Instructions When we launched the Trail Edition back in 2017 it was a game changer for bike lights. A beam pattern specifically designed for mountain bike riding with a wide evenly illuminated distribution. However it required an external battery pack, and we had lots of customers wanting to go wireless. So we took the best parts of Trail, and evolved it into the Trail Evo. Bringing a long lasting, even brighter, even wider beam pattern to your handlebars, without any external cords. Read on for more nerdy design details! Advanced Optical Engineering When we developed Evo’s beam pattern, we knew we could go wider and brighter, so we redefined our illumination goals, target candela points, beam angles, and then went to work simulating, testing, prototyping and developing the most seamless pattern we've built to date. The extreme width is thanks to the finely tuned blended Total Internal Reflection (TIR) optics. Hundreds of simulations with Lucidshape software let us squish, squeeze, stretch and shape the light to hit that perfect balance of peak brightness, smooth falloff and insane peripheral coverage. Check the slider comparison below to see the difference between a fine tuned optical instrument such as Trail Evo vs a name-brand light that has been around for years. The difference is staggering in person. USB-C Pass-thru Charging Everyone has USB charging ports all over nowadays, so we make sure you can use any of them with the Trail Evo, including almost all QC 3.0-rated chargers for super fast recharge times. But we took that concept one step further and added Pass-Thru Charging (PTC) to allow you full access to all output modes of your light while charging from an off-the-shelf USB Power Bank, so that you can extend runtime for those epic adventures, without limiting the light available to you (bikepackers rejoice!). We even customized the included USB-C cable to seal against the elements when plugged in so you don’t need to worry, just ride. Rock Solid Mounting A good light isn’t so good if it’s bouncing up and down on the bars all the time. That’s why we made a bolt-on clamp mount for Evo so it’s solidly locked to the bar, With a simple shim it adapts from 35mm to 31.8mm bars and the beam won’t shake around like lights with rubber strap mounts do. We adapted an established camera tripod mount concept then miniaturized it for slick snap-in installation with a ramped-cam that always takes up the slack as it wears, so you never have a rattly interface, and an easy one-handed quick-release process to pop the Evo off post-ride to charge. Simple User Interface Few people read instruction manuals, even fewer want to, so we keep our lights dead simple so that you don’t need an advanced degree to remember some complicated sequence of button presses get to the mode you want. Evo’s soft-touch overmolded top shell has a single, large button right in the middle that’s easy to feel through a thick winter glove in the dark, with four green indicators to clearly convey mode and battery status without the need for a decoder. Four simple modes cover the majority of use cases from set-it-and-forget-it pedally XC to long-climb-fast-descent Enduro rides – Adaptive / High / Medium / Low – and no SOS or seizure inducing strobes stuck in between. Electrifying design We like to keep our lights simple on the outside for the user, but that doesn’t mean we’re skimping on the guts inside. The constant-current driver maintains rock solid regulation through the Cree XD16 LEDs over the entire voltage range of the genuine Samsung 21700 cells with a unique battery monitoring algorithm to give you accurate feedback without interruption. Complete with fast QC 3.0 USB-C charging and Pass-Thru capability to boot, we engineer the electronics to maximize efficiency and runtime while minimizing charge times, all without any proprietary connectors that could leave you stranded. Thermal Engineering LED lights get hot, that's a fact of life. One of ou

This is the ultimate bike light setup. Trail Evo on the handlebars for that up-close and mid-range fill light, Hangover on your bike helmet that gives a wide but punchy light throw that with their powers combined, creates the Evo Downhill Package. This system together outperforms ANY single high power lamp on the market. More importantly? No wires. No one wants that anymore for their bike lights, let's be real. Engineered & assembled in Chicago, IL! Package Includes: - Trail Evo bike light for the handlebar with a quick release mount - Hangover for bike helmet, with a GoPro mount installed - Customized USB-C to USB-A charging cables Specifications - Mounting Location: Handlebar and Helmet - Application: Bike Light package for Trail Riding - Runtime: (see runtime charts) - Charging: USB-C with Pass-Thru Charging (0 to 80% in 3 hours for EVO, 0-80% in 60 minutes for Hangover) - What’s in the Boxes: Trail Evo: Quick-Release Bar Mount, USB-C to USB-A Charge Cable, 2.5mm Hex Wrench, Instructions, Hangover: Quick-Release Action Camera Mount, Curved Helmet mount with adhesive pad, USB-C to USB-A Charge Cable, Instructions - Lumens: Approximately combined 3000-3100 - Battery Capacity: 3.6V 3500mah (12.6 Wh) for Hangover, 3.6V 10,000mAH (36.0wH) for Trail Evo. - Weight: Evo = 275g + 36g mount, Hangover = 105g + 20g mount

NiteRider understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the "entry level" commuter lights are nothing more than "be seen" lights. Your overall safety and visibility should not be limited by your budget, that's why NiteRider created the Mako Series. The Mako line offers three models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. A favorite feature is the side "gills" that emits light, it not only looks cool, but makes the Makos more visible. The Mako line is easy on the wallet and easy to operate. - Side lights - Economical, high output light - Super bright flash setting ideal for daylight use - Easy operation battery operated (comes with 2 x AA) - 3 light settings – High, Low and Flash - Lumen Output: 150 - Run Time: 18:00 – 72:00hrs - Weight: 175g - Battery: Alkaline AA x 2 WARRANTY The Mako 150 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Handlebar Mount - 2 AA Alkaline Batteries

NiteRider understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the "entry level" commuter lights are nothing more than "be seen" lights. Your overall safety and visibility should not be limited by your budget, that's why NiteRider created the Mako Series. The Mako line offers three models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. A favorite feature is the side "gills" that emits light, it not only looks cool, but makes the Makos more visible. The Mako line is easy on the wallet and easy to operate. - Side lights - Economical, high output light - Super bright flash setting ideal for daylight use - Easy operation battery operated (comes with 2 x AA) - 3 light settings – High, Low and Flash - Lumen Output: 200 - Run Time: 15:00 – 60:00hrs - Weight: 175g - Battery: Alkaline AA x 2 WARRANTY The Mako 200 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Handlebar Mount - 2 AA Alkaline Batteries

The NiteRider Swift 300 delivers everyday reliable performance in an economical ultra compact head light. Sporting features like an easy on and off handlebar strap mount, low battery indicator and to top it off, it's USB Rechargeable; making it the perfect light of choice for commuters and cycling enthusiasts. Although small in size, make no mistake; the Swift 300 packs a big punch with a maximum light output of 300 lumens! Powered by an internal Lithium Ion battery, in Walk Mode, the Swift 300 can run for up to twenty-seven hours before it needs a charge. - Highly durable design made with fiberglass reinforced plastic - Smooth 300 lumen beam pattern in an ultra compact and lightweight design - Innovative Collimator Lens – optimizes your field of view - Built-in, easy on and off handlebar strap mount - 4 Light Levels plus 1 Daylight Flash Mode - Fuel Gauge / Battery Level Indicator - FL1 Standard IP64, dust and water-resistant - Convenient USB rechargeable WARRANTY - The Swift 300 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Build-in, Handlebar Mount - USB Charging Cable

NiteRider understand lights are an integral part of your daily commute. Using a light can mean the difference between being seen or not by automobile drivers. Many of the “entry level” commuter lights are nothing more than “be seen” lights. Your overall safety and visibility should not be limited by your budget, that's why NiteRider created the Mako Series. The Mako line offers four models and up to 250 lumens, not only allowing the cyclist to be seen, but allowing the cyclist to see as well. The Mako line is easy on the wallet and easy to operate. - Low cost, high powered light - Highly visible in traffic = keeps you safe - 3 light settings – High, Low and flash - Tough durable design - Lumen Output: 250 - Run Time: 12:30 – 28:00hrs - Weight: 175g - Battery: Alkaline AA x 2 WARRANTY The Mako 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Handlebar Mount - 2 AA Alkaline Batteries

The NiteRider Swift 500 delivers everyday reliable performance in an economical ultra compact head light. Sporting features like an easy on and off handlebar strap mount, low battery indicator and to top it off, it's USB Rechargeable; making it the perfect light of choice for commuters and cycling enthusiasts. Although small in size, make no mistake; the Swift 500 packs a big punch with a maximum light output of 500 lumens! Powered by an internal Lithium Ion battery, in Walk Mode, the Swift 500 can run for up to twenty-five hours before it needs a charge. - Highly durable design made with fiberglass reinforced plastic - Smooth 500 lumen beam pattern in an ultra compact and lightweight design - Innovative Collimator Lens – optimizes your field of view - Built-in, easy on and off handlebar strap mount - 4 Light Levels plus 1 Daylight Flash Mode - Fuel Gauge / Battery Level Indicator - FL1 Standard IP64, dust and water-resistant - Convenient USB rechargeable WARRANTY - The Swift 500 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Build-in, Handlebar Mount - USB Charging Cable

The Adventure line of NiteRider Headlamps receive a healthy bump-up in lumens this year. Now pumping 320 lumens output on High. Featuring a lightweight yet rugged build quality, the Adventure 320 Pro is a bright, versatile light that delivers reliability through NiteRider’s long history of outdoor digital electronics; so you can continue on through the darkest of nights. Equipped with our Pivot Stick-on Mount, this light easily mounts to most flat smooth surfaces. Meets FL 1 Standard IP67, protected against the effects of immersion in water to depth between 15 cm and 1 meter. - 4 Light Levels plus 1 Night Vision Mode - 4 Safety Flash Modes, including SOS - FL1 Standard IP67, water immersion ok between 15 cm and 1 meter - Removable mount - Adjustable light angle - Lightweight, weighing in at just 70 grams - Convenient USB rechargeable - Low battery indicator WARRANTY - The Adventure 320 Pro is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Headlamp - Internal Li-Po Battery - Pivot Stick-on Mount - USB Charging Cable

Big things come in small packages and the NiteRider Lumina Micro 650 is the proof. The Lumina Micro 650 delivers a powerful punch with 650 lumens of light output, helping you to safely navigate your ride. Allowing you to see and be seen. As with all Luminas in the series, it features a low battery indicator – when the power button changes from blue to red color this indicates that there is approximately 15-20% battery life remaining. - All New Collimator Lens, produces a generous even widespread beam - Daylight Visible 650 lumen output head light - CREE LED at 6000k - Ride safely with Daylight Flash Mode! - 4 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable Handlebar Mount - Fits standard and oversize 35mm handlebars - Compact and lightweight design that's perfect for helmet mounting (Helmet Mount Sold Separately) - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY - The Lumina Micro 650 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - USB Charging Cable

Looking for our best selling Lumina series in a smaller and lighter package? Look no further than our Micro 900. NiteRider makes this headlight USB rechargeable for convenient on-the-go charging. Another feature of note on the 900, Intellicharge, which reduces your charge time in half—giving you more time riding and less time waiting. Its light weight at 130 grams makes it quite suitable as a helmet mountable option as well as bar compatible—standard and oversized 35mm diameters. - 900 lumen output - All New Collimator Lens, produces a generous even widespread beam - 4 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - High output light using a CREE LED at 6000k - Ultra lightweight 900 lumen head light, weighing in at only 130g including mount - Secure on and off-road handlebar mount - Fits standard and oversize 35mm handlebars - Small compact design that’s perfect for helmet mounting (Helmet Mount Sold Separately) - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 8-10 seconds to lock out operation of light. USB RECHARGEABLE The Lumina Micro 900 is USB Rechargeable. Another feature of note on the 900, Intellicharge, which reduces your charge time in half—giving you more time riding and less time waiting. Charge time is 2:30 hours, when plugged into a power source outputting over 500 mA and 4:30 hours when below 500 mA. MOUNTING OPTIONS Its compact profile and high light output make the Lumina Micro 900 ideal for helmet mounted applications, helmet mount available as an optional accessory. Or use handheld in Walk Mode for an amazing 60:00 hours run time. WHAT'S INCLUDED? - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fit up to 35mm - USB Charging Cable

Nightrider Lumina Pro Series features 5 light levels plus 3 Daylight Flash modes and customizable light output and flash patterns by way of NiteRider App. Compact size fits on crowded handlebars and fuel gauge provides battery life at a glance. NiteRider Vmax+ 150 Taillight features 150 lumens in a low profile design with a full LED light panel.

Epro 1000 is NiteRider's first headlight specifically made for electric bikes. It comes with pre-wired power line for connection to the eBike's battery. Power line cable measures approximately 52" in length. Headlamp powers on with ignition switch. Features two modes-Steady ON and Pulse Flash-with Built-in Mode Memory (remembers last setting). FEATURES - Lumen Output: 1000 - 2 Modes - Hardwired, Voltage 12 to 40 Volts 1.2 amps at 12v, 300mA at 40 volts - Water / Dust Resistant IP64 Rated - Weight: 166 grams - Fits 22mm-31.8mm seat posts - Includes a pre-wired Epro 1000 Head Light, Handlebar Clamp Mount, and Rubber Mounting Shims LIGHT MODES 1) Steady ON 2) Pulse Flash NiteRider recommends this headlight be installed by an authorized e-bike service and repair shop. Please reference your bike manufacturers manual for compatibility. Not compatible with 6 Volt systems.

The All New NiteRider Lumina Dual 1800 represents the next evolution of our best-selling Lumina headlight into a dual LED set-up that produces a far-reaching beam pattern with extensive peripheral illumination; making it the ideal choice for any riding situation or terrain. The Dual emits an amazing 1800 lumens while in Boost Mode, making it one of the brightest self-contained bicycle lights available today. Simply double tap the power button to set the light to Boost Mode. When in Boost Mode, the power button will illuminate red and blue to notify the user at a glance. The Dual is also equipped with side lighting to increase your visibility day or night. Tested, meeting an IP64 rating; The Dual 1800 is designed to be used in a variety of riding conditions because of its high resistance to water and dust. Its high-strength Dupont Fiberglass reinforced nylon body casing and aluminum heat sink are engineered for extreme resistance to cracking and abrasion. - All New Collimator Lens, distributes a smooth widespread beam pattern - Side lighting for increased visibility day or night - Long lasting 20 hour runtime at 100 lumens in Walk Mode - 5 Light Levels plus 2 Daylight Flash Modes - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Helmet mountable (Helmet Mount sold separately) - Fast 3 hour charge via the included AC power charging adapter - Low battery indicator - Extend your ride time, 6 hour runtime at 350 lumens in Low Mode - Boost Mode indicator, power button will light up red and blue - Boost Mode, double tap power button to unleash maximum LED output at 1800 lumens! - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. WARRANTY - The Lumina Dual 1800 is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - Dual LED Head Light - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - AC Power Charging Adapter

NiteRider Lumina Max lights light up the night and are daylight visible with Cree LEDs and Max Boost mode. They're high-powered and feature a rugged design made with Dupont fiberglass-reinforced plastic body with integrated aluminum heatsinks. Max series lights feature NiteLink wireless connectivity with the Omega 300 taillight. - NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the headlight and Omega EVO 300 taillight wirelessly. (Taillight sold separately) - Multiple light modes including varying Steady and Safety Flashes - Handlebar mounting (Up to 35mm) with Quick Release Tab for easy light removal - CREE LEDs—the highest-performing LEDs on the market - Compatible with NiteLink Wireless Remote Switch (Sold separately) - Lumens: 2500 - Battery: Li-Ion - Recharge Type: USB

NiteRider Lumina Max lights light up the night and are daylight visible with Cree LEDs and Max Boost mode. They're high-powered and feature a rugged design made with Dupont fiberglass-reinforced plastic body with integrated aluminum heatsinks. Max series lights feature NiteLink wireless connectivity with the Omega 300 taillight. - NiteLink Wireless Technology allows the rider to pair and simultaneously power on/off the headlight and Omega EVO 300 taillight wirelessly. (Taillight sold separately) - Multiple light modes including varying Steady and Safety Flashes - Handlebar mounting (Up to 35mm) with Quick Release Tab for easy light removal - CREE LEDs—the highest-performing LEDs on the market - Compatible with NiteLink Wireless Remote Switch (Sold separately) - Lumens: 2000 - Battery: Li-Ion - Recharge Type: USB

The Pro 2200 boasts one of the category's best power-to-weight ratios. With 2200 lumens of light output, using 3 CREE LEDs- set into a NiteRider custom reflector, guarantees to set the darkest bike trail ablaze. It features an accurate eight-step fuel gauge, keeping the rider informed of battery levels at all times. These attributes make the Pro 2200 the "go to" light among the world's top athletes and enthusiasts alike. - Compact and lightweight, perfect for race inspired riders - Custom 3 cone reflector producing brilliant trail illumination - 3 – class leading CREE LEDs at 6000k - Rugged design with Dupont Fiberglass reinforced nylon housings - Handlebar mount fits up to 35mm diameter bars - Helmet mountable - Lightweight 4 cell Li-Ion battery - Easily check battery power levels with the 8 step fuel gauge - FL 1 Standard IP64, dust and water-resistant - Convenient nylon storage pouch WARRANTY The Pro 2200 Race is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Headlamp - Li-Ion Battery - Helmet Mount - Handlebar Mount – Fits up to 35mm - 36" Extension Cable - AC Adapter - Nylon Storage Pouch

With a 2200 lumen output, you'll be sure to see every trail line, root, rut or rock with relative ease. The Pro 2200 Enduro spec includes an 8 cell battery for double the run times, when compared to the 2200 Race spec. The four steady light modes, two steady flashes and S.O.S. give you seven options for any adventure you decide upon. FEATURES - Lumen Output: 2200 - 7 Modes with Run Times: 3:00 – 50:00hrs - Charge Time: 5:00hrs - Weight: 702g - Battery: Li-Ion - 8 Step Fuel Gauge - Handlebar and Helmet Mountable - Water / Dust Resistant IP64 Rated RUN TIMES Low—12:00h at 500 Lumens Medium—6:00h at 800 Lumens High—3:00h at 2200 Lumens Flash—50:00h at 730 Lumens Beacon—50:00h at 730 Lumens S.O.S.—50:00h at 730 Lumens Race—50:00h at 250 Lumens

Boasting 4200 lumens and 6 CREE LEDs at 6000k; the Pro 4200 Enduro offers 4 brightness settings and a daylight flash mode that are factory-tuned to optimize riding in any condition. And, a long-lasting 8-cell battery that doubles as a USB portable charger makes this lighting system perfect for long night rides, high speed MTB descents, or backcountry touring. - Ultra bright 4200 lumen output - 8 Cell Li-Ion battery, doubles as a USB portable charger - Remote switch for ease of operation - The preferred light for serious MTB riders - Highly durable light housing with Dupont Fiberglass reinforced nylon - Perfect for handlebar mounting - FL 1 Standard IP64, dust and water-resistant - 4 steady light modes and 1 daylight flash - Custom 3 cone dual-beam reflectors utilizing 6 CREE LEDs at 6000k - Convenient nylon storage pouch Warranty: - The Pro 4200 Enduro Remote is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. System Includes: - LED Headlamp with Remote Switch - Li-Ion Battery/USB Portable Charger - Handlebar Mount - Fits up to 35mm - AC Adapter - Nylon Storage Pouch

Vis Adventure's powerfully focused beam and compact size make for a versatile light that can be used for any outdoor sport. It is perfectly designed to run on your helmet, bars, or anywhere you can fit a GoPro mount. Designed to maximize output in a compact design, the Vis Trail features an optimized reflector to make the beam broader and smoother without hotspots. Paired with either a 2, 3, or 6-cell interchangeable external battery, the Vis Trail gives you the flexibility to achieve the runtime you desire for the right price. This light is built for long gravel races, steep snowy slopes, and any adventure you throw at it. Charger not included and must be purchased separately. Key Features - 800 lumen output certified to the FL-1 Standard - Highest rated CREE LED - Custom engineered LED optics create a smooth, even beam pattern - Waterproof design provides all-weather reliability (submersible up to 1 meter) - 50" cord provides plenty of length for any setup requirement - Illuminated power button with low-runtime indicator - Compatible with 2, 3, and 6 cell batteries - Multiple mount options available including GoPro adapter - Additional one-touch 'Race Mode' feature enables riders to conveniently toggle between high and medium output Tech Specs - Lumen Output: High (800), Medium (400), Low (200), Pulse (200) - Beam Angle: 20° (spot) - IP Rating (FL-1): 67 - Depth Rating (FL-1): 1 meter - Impact Resistance (FL-1): 1 meter - Thermal Management: Passive Cooling - Fast Charge: False - Product Dimensions: 2.5'' x 1.2'' x 1.2''

Seca 2000 builds on the world’s most popular trail light family in a cost-effective solution that is reliable, durable, and features a trail-optimized beam pattern that is unmatched in the market. Robust waterproof construction, custom optics, enhanced firmware, and GoPro mount compatibility further the Seca’s reputation. The 2000 Race comes standard with the lightweight 3-cell battery pack that is perfect for the after-work ride. Features - 2000 Lumen output certified to the FL-1 Standard - Premium illumination from a 4 LED array with industry leading CREE LEDs - Custom engineered reflector/optics diffuses flood LED to provide ultra-wide beam pattern and focuses spot LEDs to maximize forward visibility - Advanced electronics with custom firmware keeps lumen output from sudden drops - Additional ‘Race Mode’ feature enables riders to conveniently toggle between high and medium output - Illuminated power button with low-runtime indicator and enhanced tactile engagement specifically for gloves - Waterproof design provides all-weather reliability (submersible up to 1 meter with battery connected) - Multiple mounting options include helmet, handlebar, and GoPro interface Specifications - Lumens: 2000 (high), 1000 (medium), 500 (low), 500 (pulse) - Runtime: 90 min (high), 180 min (medium), 360 min (low), 720 min (pulse) - Beam Angle: 25° (spot) - Charge Time: 150 min

Seca 2500 is the world's ultimate trail light - its reliability, durable design, and trail-optimized beam pattern is unmatched. The newest generation of Seca features a robust waterproof construction, updated optics, enhanced firmware, and GoPro mount compatibility. Featuring: - 2500 Lumen output certified to the FL-1 Standard - IP67 Waterproof Rating (Submersible to 1 Meter) - Advanced electronics with regulated output to keep lumens steady through entire runtime - A 4 LED array using the best CREE LEDs and enhanced firmware. - Custom engineered reflector/optics diffuses the bottom LED to cover an ultra-wide spread down in front and focuses the top LEDs to penetrate the darkness and maximize riders' depth perception - Illuminated power button with enhanced engagement designed specifically for gloves - GoPro mount compatibility Included: - Handlebar mount, GoPro mount, helmet mount, 6 Cell battery, battery strap, Mini L 1.5 Charger (US/JP, UK, EU, AUS compatible)

The Lezyne Femto Drive is a compact, bright light that features a CNC-machined aluminum body that is durable and weather resistant. the Femto Drive provides 15 lumens and mounts quickly without tools. - High-grade, optical Lens also serves as an activation button that cycles through the five modes - Multi-position silicon rubber strap attaches directly to the back plate to secure to a wide range of handlebar and seat tube sizes - Clip-on System features a patent pending Clip-Strap back cap design and is made of durable composite Matrix material - Threaded back cap resists cross threading - Two CR2032 batteries are included - Five Power Modes: four Flash and one Steady Specifications - Battery: CR2032 - Recharge Type: Not Rechargable - Weight: 31 - Lumens Front: 15

Compact, super-lightweight USB rechargeable LED cycling safety light. Its durable co-molded construction is minimal and has an IPX7 water-resistance rating. A versatile mounting strap quickly mounts to a variety of bar sizes. Five output modes offer up to 15 lumens and the custom Wide Angle Optics lens provides up to 270° of visibility. The Femto USB Front can run for up to 20 hours and is easily rechargeable with the included Micro USB cable. A secure, threaded composite matrix cover keeps the USB port clean and sealed. The Femto USB is perfect for commuters and recreational riders looking for a simple and inexpensive way to add visibility. Specs - Max Lumens: 15 - Weight: 22g - Max Runtime: 22 hours - Recharge Time: 2:30

Compact cycling safety light with two bright LEDs and a 200-lumen Daytime Flash mode. It features a super lightweight, yet durable co-molded construction that is IPX7 (waterproof) rated. NEW -- Up to 20 hours of runtime (eight hour increase) and up to 200 lumens (20 lumen increase) of output. And it features an integrated USB stick for convenient cable-free recharging. The KTV Drive Front offers five output modes. Specs - Max Lumens: 200 - Weight: 47.5g - Max Runtime: 20 hours - Recharge Time: 2:15

A compact cycling safety light built around three high-output LED emitters, the KTV Drive Pro 300+ Front light offers up to 300 lumens of output and a highly disruptive Daytime Flash mode. It features a lightweight yet durable waterproof construction, rigorously tested to IPX7 Waterproofing standards. The KTV Drive Pro 300+ Front offers convenience and versatility with six output modes, up to an impressive 100-hour max runtime, and waterproof USB-C charging(cable not included). Note: This light is not being distributed within the German market. - Max 300 lumen blast mode / 100-hour runtime in Femto mode - Max 300 lumen blast mode / 100-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Waterproof USB-C charging port with charge indicator - Low-profile mounting with integrated strap hooks - Rigorously tested to IPX7 Waterproofing standards - 1400 mAh battery capacity