Parts & Accessories

Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts

End Plug For Femto USB and Stvzo Femto USB Front

Compatible with Shiner and Shiner Back lights - Rubber pad with loop straps to quickly mount and remove light for recharging - 50mm bolt spacing to fit most rear racks

Replacement mounting strap for the Zecto and Femto LED lights.

Seamlessly mount your Nip e-Bike light to the underside of the Bosch computer module. - Compatible with Nip e-Bike Headlights

Optional mounting bracket for the CatEye Rapid X, CatEye Rapid X2, and CatEye Rapid X3. Allows you to mount your Rapid to any of the CatEye tail light brackets.

Use Light & Motion's 2.0A USB AC Adapter to charge your light with a USB cable, using a standard wall outlet. - Compatible with: Urban, Vis, Solite, Taz, GoBe

- Compatible with seatpost diameter 20mm-36mm - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal - Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis, Superflash Micros and Blinky Safety rear light

Customized base mount for those helmets that have a vent down the center, making a typical action camera mount impossible to use. This spans that gap. Helmets that we know work well with this mount are: Bell 4Forty MIPS Bell Drifter MIPS Bell Formula Bell Nomad 2 MIPS Bell Sidetrack II Bell Sixer Bell Super Air R Bell Super Air Spherical Bell Super DH Bell Z20 Bontrager Blaze WaveCel Mountain Bontrager Circuit WaveCel Road Bontrager Quantum MIPS Bontrager Ralley WaveCel Mountain Bontrager Solstice MIPS Bontrager Specter WaveCel Bontrager Starvos WaveCel Round Fit Bontrager Velocis MIPS Road Bontrager XXX WaveCel Road Giro Cinder MIPS Giro Ember MIPS Giro Fixture MIPS Giro Hale MIPS Giro Helios Spherical Giro Hex Giro Montaro MIPS II Giro Radix MIPS Giro Register MIPS Giro Source MIPS Giro Switchblade MIPS Giro Trella MIPS Giro Vasona MIPS Giro Verce MIPS iXS Trail Evo iXS Trail XC iXS Trigger AM Kali Alchemy Kali Cascade Kali Invader Kali Lunati Kali Uno Kask Caipi Lazer Coyote MIPS Lazer Impala MIPS Lazer Z1 MIPS POC Axion POC Kortal POC Octal POC Tectal POC Ventral Smith Convoy Smith Network Smith Persist Smith Signal Smith Trace Specialized Prevail 2 Specialized Prevail 3 Specialized Prospero III

The PDW Light Nug Headlight Mount attaches to frame eyelets to add headlight mounting options to your bike. - 26.0 diameter fits most headlight mounts - Knurled for great grip - Includes stainless bolt and lock washer

So many of you wanted to be able to mount our lights underneath your bike computers that we created this nifty little adapter. All the guts of our Quick Release Handlebar Mount that comes with Detour and Evo, but to work with an Action Camera mount. This works with our Detour light the best. This can work upside down or right side up, there is no wrong way, the light will always be positioned correctly.

- Versatile LED and accessories forward mount - Bolts directly to stem faceplate - Included Aluminum Fork Mount, spacer and screw set - Suitable for most Lezyne most E-Bike front lights (Macro, Power, Power Pro, Micro, Hecto)

Replacement bar mount for Urban lights with thumb screw for quick removal. Has a quick release design allowing the mount to quickly separate from the light. Compatible with all model year Urban lights. - Includes mount, strap, allen key, and bolt

Lezyne replacement mounts for ebike lights.

Strap Light & Motion's Vis 360 Spare Rear Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.

Planet Bike's BRT Strap is a small item that provides big visibility. This versatile LED safety band can be used as an arm band, pants keeper, dog collar and anything else you can think of. An included lithium battery provides over 200 hours of run time in either flashing or steady mode.

Bracket for aero seatpost

PWR stands out. Not literally though. In fact the system of mounts are designed to hide PWR away. The world-first side mount holds the PWR Road and PWR Trail lights above or below the headstem. And additional mounting options include extension cables to carry away the extra bulk. - Compatible with: PWR Trail and PWR Road lights. - T Slot: Allows for quick release of the light when parking your bike - Centric mounted: Design allows the light to be centrally positioned both above and below the handlebar. - Thumbscrew: Allows for additional tightening - Fits handlebars: 22.2mm - 31.8mm - Weight: 20g

- Mounts most AA flashlights to handlebars and helmets - Ideal low-cost lighting alternative for cyclists

The NiteRider Tail Light Mount – Seatstay and Seatpost is our classic seatpost mount design that gives riders the option to mount their tail light to their seat stay, using the included seat stay clamp. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL

- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis Superflash Micros and Blinky Safety rear light - Designed specifically for aero seat posts - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal

This mount is designed to securely attach your Light and Motion Vis 180 Micro taillight to your bicycle.

- A great way to mount a light, computer, power meter or GPS unit in the center of a threadless stem - Made in the USA - Material: 6061 Aluminum - Weight: 24g - Outside Diameter: 26.0mm - Stem Size: Threadless 1-1/8"

Helmet mount for all systems that use the slider mounting clip. Not compatible with Lumina Series Lights. System Compatibility - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb

This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.

Take your Light & Motion headlight off your handlebars and along with you wherever the path may lead. Soft fabric and full adjustable sizing make for a comfortable fit.

- Quick Strap mounts, adjusts or removes in seconds without tools - Fits 25.4-35mm handlebars - Compatible with Blazes, Beamers, 1200 and Super Spot

Replacement rubber end plug for the Strip Drive Front, Strip Drive Rear or Strip Drive Pro Rear lights

- Compatible with all Blaze headlights, Beamer 1/3/5, 1200, Dual Spot, and Bright Spot bike headlights - Fits 25.4 – 31.8mm handlebars