Parts & Accessories

The EXP Series Direct Mount Thumb Screws allow for quick and easy attachment of Salsa EXP Series Direct Mount Packs to bicycle frames equipped with direct-mount locations. - Can be installed and removed by hand or with allen key - Includes necessary 0.5 mm washers and 4 mm spacers - Sold in packages of two

Lower mount kit for all Salsa's Alternator Racks (sold separately)

The Salsa EXP Series Rubber Strap is a strong, adjustable strap that holds your gear securely to Salsa Anything Cages, Anything Cradles, or racks. Use them anywhere you need to secure a load on your bike. - UV- and weather-resistant - Includes band to keep excess strap out of the way - 22" length is best for use with Salsa Anything Cage and Anything Cage HD - 30" length is best for use with Salsa Anything Cradle - Sold in pairs

The Salsa EXP Series 35.0 Anything Cradle Arms are for mounting the Salsa EXP Series Anything Cradle (sold separately) to handlebars with a 35.0mm or 31.8mm clamp diameter. - Compatible with 35.0mm bars or 31.8mm bars (with included shims) - Compatible with all Salsa EXP Series Anything Cradles - Hinged clamps allow for easy installation and removal from handlebars - Made of 6061 forged aluminum

- Spacers for Explorer Exp Barbag

Our Silicone tape has lots of uses. It sticks to itself, leaves no adhesive residue, adds grip and padding. Wrap it on frame contact points, use as a chain stay protector, wrap your brake levers, seal blown hoses on your car...the list goes on. This tape bonds to itself for adhesion, once applied it forms a semi-solid wrap and should be considered one application only. It can be easily cut off rather than unwrapped. Sold in 10' rolls in clear.

Made from CR4 Steel with a durable powder coated finish, the Restrap Bumper Bar includes a front grille and 30mm slots on the top and bottom that work seamlessly with the retention straps of bar bags. Also included are 5mm diameter holes on the top and bottom for additional mounting options. The front is curved to allow the fitting of most lights, where the position out the front of the steerer is ideal for forward visibility. - Fits 1-1/8" threadless headsets - Acts as a 3mm headset spacer - 178g

The Proviz REFLECT360 pannier cover is adjustable and designed to fit over all standard size panniers (up to 25L capacity). The Proviz REFLECT360 pannier cover, like the whole of the REFLECT360 range, is manufactured from CE EN 20471 certified material. The pannier cover is dual-layered to give you unparalleled water-resistance and is made from 100% reflective material to help your position be more easily identified on the road. The Proviz REFLECT360 pannier cover is attached securely using elasticized cords and press-stud fasteners. The edges of the cover are elasticized to create a secure fit around your pannier. A light loop can also be used for those wishing to attach an extra LED light. About the fabric: The fabric used for the REFLECT360 range is highly technical. During daylight, it is a modest grey color. At night, when the fabric picks up an external light source, e.g. vehicle headlights, it gives "astonishing reflectivity" (quote: Cycling Active Magazine Sep:2014). The material is CE EN 20471 certified. - Made from 100% reflective material—CE EN 20471 certified - Dual-layer 100% waterproofing - Easily fitted to most panniers up to 25L in size - Elasticized edge, straps, and press-stud fasteners - Light loop (to add LED light)

Compatible with Shiner and Shiner Back lights - Rubber pad with loop straps to quickly mount and remove light for recharging - 50mm bolt spacing to fit most rear racks

The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level. - 32mm diameter clamping area for lights - Attaches with two M5 bolts and a steel backing plate - Mounts on left or right side

Universal shoulder strap for ORTLIEB bags. Includes D-rings, plastic shoulder pad and carabiners. For Bike-Packer and Sport-Packer models from 2009 and for all Back-Roller City, Sport-Roller City and Gravel-Pack models. DETAILS: - 1 shoulder strap with carabiners

For all models from 1999 Need to replace a defective buckle? DETAILS: - 1 plastic, side-release buckle

For all models with the QL2.1 system. Inserts are available for the two upper 16-mm mounting hooks that come with the proven QL2.1 mounting system. The inserts allow you to securely attach your ORTLIEB pannier to virtually any bike rack with smaller tube sizes (16 mm). DETAILS (PER PANNIER): - 1 pair of 8-mm inserts - 1 pair of 10-mm inserts - 1 pair of 12-mm inserts

Models with the QL1 system from 2005; Models with the QL2 system. The right hook inserts allow you to securely attach your ORTLIEB pannier with its proven QL1 or QL2 mounting system (16 mm) to virtually any bike rack. - 2 inserts measuring 8 mm - 2 inserts measuring 11 mm

For all models with the QL2.1 system. If your mounting system-s lower anchoring hook is lost or worn, you can easily replace it with a new anchoring hook. DETAILS: - 1 anchoring hook and mounting screw

For all models, including the Back-Roller and Sport-Roller, with Stealth buckles Need to replace a pair of broken buckle? - 2 plastic buckles (male and female ends, 25 mm, black)

The shoulder strap for your Ultimate Compact, Bike-Box, E-Glow, E-Mate, Velo-Shopper, Trunk-Bag RC or Bike-Tourer is just what you need to carry on once you reach your destination. CONTENT: - 1 shoulder strap with plastic pad

This mounting set allows you to attach your Saddle-Bags to other bicycles. For all Saddle-Bag, MudRacer and Micro models. - 1 mounting set for Saddle-Bags, including screws

To avoid chafe marks on the handlebars, you can simply re-order these foam pads as a set of 5. CONTENT: - 5x distance pads, grey

Metric screws and plastic screws for mounting the upper QL2.1 rail. For all models with the QL2.1 system. CONTENT (FOR ONE PAIR OF BAGS): - 4x metric screws incl. nut washers - 2x self-tapping screws incl. plastic washers

For all models with the QL1 or QL2 system. Missing or defective screws or nuts? Get this screw-and-nut set to conveniently replace any defective or missing screws. - 12 screws - 12 plastic nuts

For all models with the QL2 or QL2.1 system. If the standard mounting hooks are too small to fit on the tubes of your bike rack, simply replace the standard hooks with a set of 18-mm ORTLIEB hooks (cannot be used with inserts). - 2 QL2.1 mounting hooks (18 mm) and adjustable handle

Perfect for safe storage of maps, passports, and other important documents while traveling. The dust and waterproof transparent bags are made of UV-, tear-, and crease-resistant fabric with seams as tough as the material itself. They will withstand extreme atmospheric temperatures and repeated use. Also suitable for electronic devices such as GPS, cell phones, or MP3 players. Comes with neck cord and stainless steel eyelets. Available in three sizes (A4, A5, A6).

The integrable mesh inner pocket with zipper for the Handlebar-Pack QR. For all small items, such as wallet, snacks, cell phone or keys.

For all models with the QL1 system from 1993. Worn, broken or lost QL1 mounting hooks? No problem! Simply replace the hooks with a new set of QL1 hooks and adjustable handle. If the new hooks are too loose on your bike rack, use the appropriate hook inserts for a snug fit. - 2 QL1 hooks (16 mm) and adjustable handle - 1 pair each of hook inserts in sizes 8 mm and 11 mm

For all models with the QL2 or QL2.1 system. If the standard mounting hooks are too small to fit on the tubes of your bike rack, simply replace the standard hooks with a set of 20-mm ORTLIEB hooks (cannot be used with inserts). DETAILS: - 2 QL2.1 snap hooks (20 mm) with adjustable handle

For all models with the QL2.1 system, except for: Office-Bag, Commuter-Bag, Commuter-Bag Two and Downtown Two Worn, broken or lost mounting hooks? Replace your QL2.1 hooks with a new set of QL2.1 hooks and plastic handle. If the new hooks are too loose on your bike rack, use the appropriate hook inserts for a snug fit. - 2 QL2.1 hooks (16 mm) with plastic handle - 1 pair each of hook inserts in sizes 8 mm, 10 mm and 12 mm

Replacement wire cord for your Handlebar Mounting Set. If the mounting wire for your handlebar adapter is defective, you can find the right spare part here. Contents - 1x wire cord with a length of 105 cm in black

- Strap with buckle and hook for supporting the Seat-Packs - Prevents lowering of pack with uneven weight distribution - Additional support for Seat-Pack straps when fully loaded - Excessive strap is fixed with Velcro - Can be used for Seat-Pack M and L

If you have unconventional handlebars (sold separately) but still want a bag with easy access when riding then pick up Ortlieb's Extension Mounting Set for the Ultimate5 handlebar bag (sold separately). It pushes the bag out front further than normal so you can still use your fun hand positions and enjoy the convenience of a handlebar bag.