Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Salsa DT Swiss RWS Thru-Bolt
$32.20 - $75.00
- Ratcheting system tightens skewers with turns rather than cam - Up to 50% more clamping force than standard quick releases - Lever can be placed in an ideal position - AL7075 axle and alloy lever - Each length corresponds to a different axle. - 15 x 100mm thru-bolt is compatibile with Salsa's Firestarter Carbon Fork - 15 x 142mm thru-bolt is compatible with Salsa's Makwa Fork - 12 x 177mm thru-bolt is compatible with Salsa's Beargrease rear axle.
Salsa Deadbolt Thru-Axle
$49.00
The Deadbolt Thru-Axles feature the classic-looking Salsa lever and can be adjusted to return to the desired position when properly tightened. Lightweight, easy to use, and secure. - CNC-machined from 7000 series aluminum - Designed to fit all current Salsa thru-axle frames - For other frames, check with the manufacturer for compatibility and other specifications
Salsa Deadbolt Ultralight Thru-Axle
$39.00
The Deadbolt Ultralight Thru-Axles are offered in a 6mm flat button head design, for a flush, clean look. Lightweight, easy to use, and secure. - CNC-machined from 7000 series aluminum - Designed to fit all current Salsa thru-axle frames - For other frames, check with the manufacturer for compatibility and other specifications - 6mm hex wrench required for installation
Salsa Fat Conversion Hub End Caps for Front (150mm)
$25.00
- Converts Salsa Conversion hubs from 135/142 to 150mm in order to use with the RockShox Bluto Fork, or other 150 mm Thru-axle forks - Requires the wheel to be re-dished
Salsa Front Stainless Flip-Off Skewer
$32.00
Salsa's Stainless Flip-Offs use stainless steel rods for corrosion-resistant strength. They're strong, lightweight, and gorgeous. - Recommended for front rigid fork or full suspension use - Beautifully machined and hand friendly - Variety of sizes, sold as pairs or individually, front or rear - Black, Silver, Blue, Red, Green, Orange, Purple, or Pewter - More than just eye candy, they’re hand candy, as well - Weight: 49g
Salsa Rear Stainless Flip-Off Skewer
$36.00
- Standard skewers fit either 130 or 135mm spaced hubs, unless listed as another length (i.e. 170mm) - 6061 machined lever with stainless steel pivot and laser-etched logo - All shafts are 5mm in diameter
Salsa Rear Titanium Flip-Off Skewer
$40.00
Salsa's Ti Flip-Offs are as beautiful to the touch as they are to the eye. Lightweight. Smooth. Recommended for road use or rigid front mountain bike use only. Available in a whole host of colors. - Beautifully machined and hand-friendly - Black, Silver, Blue, Red, Green, Orange, Purple, or Pewter - More than just eye candy, they’re hand candy, as well - Weight: 44g
Robert Axle Project Kid Trailer Thru Axle for Surly MDS/Gnot-Boost
$58.00 - $65.00
Purchase our Kid Trailer axle for your bike. and share your stoke for cycling with your kids. Simplify your life by allowing quick and secure attachment of your trailer to your best and favorite bike. Enjoy the adventure. Robert Axles for Kid Trailers are designed specifically to fit your 12mm thru-axle bike and allow attachment of any hitch-mounted trailer. These fit any trailer that has two wheels and a single point of attachment to the axle. This includes all the two-wheeled child, pet, and cargo trailers such as Thule, Chariot, Burley, Instep, Carry Freedom, and many more. - This axle is specifically designed to fit the 142/148 hub standard Surly MDS or Gnot Boost bikes. - The derailleur end of our axle is internally threaded and will use the bolt from your stock Surly axle. The disc brake side of our axle has an engineered mount for your trailer hitch. That mount has been permanently attached to the axle. - The axle shaft and axle end are precision CNC-machined. - The axle shaft is 7075 aluminum and hard black-anodized for rugged durability. - The stainless steel axle end allows for mounting of the hitch provided with your trailer. The threads are M10x1 (metric). - Hardware for attachment of the hitch is included; the hitch, itself, is not. - No special tools required. Design allows for wheel installation and removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
Robert Axle Project Trainer Thru Axle
$54.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
Ritchey WCS Freehub body for Vantage and Trail SRAM XD
$69.95
Replacement XD driver freehub body for Vantage and Trail non 2-piece V2 Ritchey hubs. - SRAM XD
Problem Solvers Axle Nut
$2.49
The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.
Problem Solvers Booster
$19.99 - $24.99
Booster thru-axle hub spacer kits are designed to give your non-Boost front and rear thru-axle hubs the boost they need to fit any Boost-compatible frame or fork.
Problem Solvers Thru-Axle/QR Adaptor
$19.99
Thru-Axle hub adapters allow the use of 100 mm front thru-axle hubs in 100 mm QR forks. -Allows the use of modern thru-axle wheels in forks designed for quick-release compatible hubs -100 mm front hub spacing only -CNC-machined AL-6061
Mavic 12 > 9.5mm Rear Axle Adapters
$8.00
On today's MTB frames, there are many diameters and width dropouts standards. Most Mavic wheels can be fitted with specific adapters to match with those frames: 142mm extenders for ITS-4 hubs, 142 mm extenders for TS-2 hubs and QR adapters (delivered with a front quick release) for all of them. - Converts a 12mm rear axle to fit in a frame with 9.5mm dropouts - Requires one pair per hub
Fulcrum Road Freehub Bodies And Service Parts
$116.00
- Freehub bodies include: (1) specified freehub body, (3) pawls, and (1) pawl spring - Freehub bodies do not include lockrings
Crank Brothers Front Endcaps Kit
$39.99
9/15/20mm conversion kit for current generation front hubs - Cobalt endcaps – These kits convert current generation Cobalt front wheels to 9/15mm thru-axle. - Iodine/Opium endcaps - These kits convert current generation Iodine and Opium front wheels to 9/15/20mm thru-axle. - Conversion: 9/15/20mm - Cobalt weight: 26g (9mm) / 16g (15mm) - Iodine/Opium weight: 28g (9mm) / 18g (15mm) / 23g (20mm)
Zipp 11-Speed Freehub Kit for 2013 - Current 188 Hub
$136.00
This 11-speed freehub is only compatible with model-year 2013 (V8) and 2014 (V9) Zipp wheelsets. Check that your hub has a black end cap before using this freehub. Use the spacer for compatibility with 10-speed Shimano and SRAM drivetrains after installation. The red freehub is designed for SRAM or Shimano drivetrains and includes a spacer for 10-speed compatibility. The blue freehub is designed for Campagnolo drivetrains. The Campagnolo version requires one 0.25mm axle washer, which is included. - 10 to 11-speed wheel conversion can only be completed by an authorized Zipp Service Center - Not intended to convert older 10-speed freehub wheels to 11-speed freehub wheels - Only intended to swap freehub compatibility (SRAM/Shimano - Campagnolo) with current 11-speed wheels - Includes cassette spacer - Material: Aluminum
Zipp 11-speed Freehub Body for 30/60 Wheels
$72.00
Zipp Speed Weaponry Freehub Bodies - Material: Aluminum
Zipp 11-speed Freehub Kit for 177 Hub
$136.00
Zipp Speed Weaponry Freehub Bodies - Material: Aluminum
Zipp 77/177 Disc Conversion Caps
$17.10 - $27.00
Zipp Speed Weaponry Hub Conversion Caps
Zipp AM Rim Tape
$7.00
Package comes with two pieces of rim tape for use with the Zipp clinchers. Woven nylon material. Tape is extra thin with a thickness of 0.5 mm. Note: For Zipp 700c and 650c aluminum/carbon hybrid clichers, use the 16 mm rim tape. For Zipp 30 wheel set use 18mm but for the wider Firecrest and Firestrike carbon clinchers use the 20mm x 1/2mm rim tape.
Zipp CeramicSpeed Freehub Body and Bearing Kit: 177 SRAM/Shimano Cassette Hub Body
$363.00
- Kits include Freehub body with CeramicSpeed bearings pre-installed for easy installation onto the wheel - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings
Zipp CeramicSpeed Freehub Upgrade Kit ZIPP 177
$363.00
- Lowest resistance hybrid ceramic (ceramic balls and steel cages) available - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - Kits include Freehub body with CeramicSpeed
Zipp Cognition Freehub Kit
$116.30 - $133.00
Freehub bodies for Zipp Cognition hubs.
Zipp Connect Wheel Bag
$163.00
Each bag holds one wheel (up to 700c with 35mm cyclocross tire) for transport. It also connects to a second Zipp Connect wheel bag (sold separately) to form a double wheel bag. - Sturdy, water-resistant EVA construction with distinctive molded Zipp graphics. - Integrated carry handle and detachable shoulder strap. - Removable internal pocket for storing quick-release skewers and axle end caps. - Padding holds wheel in place.
Zipp Conversion Kit 10 – 11-speed 188 SRAM
$190.00
Zipp Speed Weaponry Rear Axle Conversion Kit - Not to be used on 188 V6 or earlier rear hubs - Only to be used to convert Zipp's 188 V7 10-speed rear hubs to 11-speed
Zipp Conversion Kit 11-speed to Track 188 Black
$205.00
Zipp Speed Weaponry Rear Axle Conversion Kits - Converts a road disc into a track disc rear - Fits black 2013 188 V8 disc hubs only - Fits Zipp 900 and Super-9 Discs
Zipp Conversion Kit Super 9 Disc 10-speed to Track for 188 Hub Silver
$176.00
Zipp Speed Weaponry Rear Axle Conversion Kit - Converts a road disc into a track disc rear - Disc must have silver, NOT black flanges - Fits 188 disc hub only - cannot be used on 900 or Sub-9 discs - Fits Zipp Super-9
Zipp Decal Set
$20.00
These die-cut borderless decals provide a distinctive look to go with the distinctive sound and aero-advantage of Zipp wheels rolling at 45km an hour. Zipp’s Matte white and Matte black decals also are still available. Each decal kit has seven decals sufficient to cover one wheel and two matching valve-hole decals. Note: Before applying the decals, make sure the rim surface is free of dirt and debris. We recommend a gentle wipe with acetone or rubbing alcohol. Peel the white backing sheet from the decal, orientate, position and gently press the decal onto the rim surface. Starting at one end, remove the surface clear cover slip and then work the decal into the dimples using a 3M squeegee.
Zipp Disc Wheel Valve Cover Patches
$6.00
A simple solution for completing the Zipp aerodynamic package by covering the valve access hole on most disc wheels. Black, self-adhesive oval patches with the Z logo, in a package of five.