Wheels

Sta Tru Rear Wheels - Single Wall rim - Hub/Brake Compatibility: Rim Brake - Wheel Size: 27.5" - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - ISO Diameter: 584 / 650b / 27.5" - Tire Type: Clincher - Rear Axle: QR x 135mm

The legs of a seasoned mountain biker combined with the power of modern pedal-assist systems means riders are venturing further and further into the backcountry. With these adventures in mind, the H 1900 SPLINE 25 MTB wheelset meets and exceeds convention. Meant to be mounted with standard width tires, it offers a good feel for the terrain, remaining nimble and playful. The straight-pull hubs and oversized parts are in place to withstand many eMTB seasons while retaining the ride experience of your non-electric mountain bike. The H 1900 SPLINE 25 will get you out there and back in total confidence, ride after epic ride.

Rainy days, wet soil, rocks, and roots. The tubeless tires somehow find grip. The M 1700 SPLINE 25 comes stock with tubeless rim tape and valves, just the right tool for demanding trails. The wide rim gives the tire that decisive little bit more support while the Ratchet System freewheel ensures safe engagements even in the most adverse conditions. Finally, being a lightweight helps you to quickly get back up to that trail entrance, to start the slip-and-grip fest all over again.

We came out with our own wheel because we got the opportunity to participate in the development of a new rim, a rim that is of outstanding quality, is tuned to our performance specs, and is made of a recyclable material that doesn’t add to landfills keeping us in line with our commitment to the environment. Performance, good looks, minimal carbon impact, AND backed up by a lifetime warranty? Yes please. Why You Want It The GRD23 is not like other wheels in many respects. It’s an all-road wheel that offers you a bit more compliance than other carbon all-road wheels. Having said that, it’s not soft. It’s not noodly. It’s just a bit friendlier to your bones when you ride it on all the stuff you ride. The GRD23 rim is made of FusionFiber®, a cutting edge thermoplastic that incorporates long-chain polymers. Without diving into the science, FusionFiber® has a wider range of compliance profiles, and that means we could tune this wheel to hit a sweet spot in road feel that we didn’t see being served by more performance-oriented carbon wheelsets that focus on using resin to create unforgiving stiffness. Unlike other carbon rims, the GRD23 rim is recyclable. If you manage to break it somehow, we’ll take it back and make it into something new. Another reason you want this wheelset is that it’s built around our R45D Centerlock hubs, the culmination of over 45 years of bearing experience and more than 20 years of hub building experience. It features a redesigned RingDrive™ system with 45 teeth for lower drag and near instant simultaneous engagement, a lightweight hub body, and our legendary made-in-house bearings. Those bearings, both steel and ceramic, have heat-treated, surgical grade steel races machined in tandem to ensure perfect matching. The quality and speed of our bearings is what you feel (and hear) on every ride. As the tracks on Chris King bearing break in and burnish they actually get faster. A little bit of regular love (i.e. service) will keep this hub rolling for years upon years of demanding use. This wheelset comes with the legendary angry-bee sound: - Built in-house with legendary Chris King precision - Made in the USA - R45D Front 12mm x 100mm - R45D Rear 12mm x 142mm Thru - 24 hole Chris King R45D Centerlock hubs - Centerlock Lock ring included and required for rear rotor installation - Tubeless Tape and Valve Kit included - King Lifetime warranty WHAT EXACTLY DO YOU MEAN WHEN YOU SAY "LIFETIME WARRANTY"? Lifetime warranty. You hear about it, but it can mean a lot of different things, especially when you get into the fine print. So, this is how it works with our new Chris King Fusion Fiber rims. The main thing to remember is that it doesn’t matter if you buy your set from your local dealer or directly from us at chrisking.com. Either way, we’ve got you covered. 1. Shop online while you're bored at work to find the perfect set of carbon wheels. 2. Decide that the new Chris King wheels (with a Lifetime Warranty) are the way to go! 3. Pick them up from your local Chris King Dealer or order them on chrisking.com 4. Get the wheels, ride wheels, love wheels. 5. In the unlikely event they get damaged because you’re just too gnarly, contact your local Chris King Dealer or email info at chrisking.com. We’ll send an RA # and shipping label to send us back the wheel. 6. Once we receive it, we will rebuild your wheel with a brand new, box fresh rim and give your hub a proper once over to make sure it is in tip top shape (free of charge, of course). 7. We ship your wheel back to you so you can get back to having fun on your bike and ship the broken rim off to be recycled. There it is in black and white: free shipping both ways, a hub tune up, and prioritized rebuild scheduling. We know it’s a big investment and we want to keep you on your bike and stoked on your purchase, for life.

EX 1700 SPLINE wheels feature a super strong and welded 30 mm wide aluminum rim with a profile design made to withstand the hardest use of Enduro racing, while still keeping the weight low for long and demanding uphills. Laced to double butted competition straightpull spokes, the EX 1700 SPLINE wheels are built to take a beating. - Welded Aluminum rim with 30mm internal width - 350 hub with 36 point SL Ratchet system - Competition spokes and Squorx nipples - Designed for Enduro applications

The pinnacle of aluminum road wheels. The ceramic OXIC surface coating brings brake performance to rim brakes like it has never be seen before. The rims are wide, asymmetric, and lightweight, making for an outstanding stiffness to weight ratio. If set up tubeless, supreme comfort and grip are added to the athletic character. - OXiC rim surface technology for improved braking performance and wear - Tubeless Ready rim compatible with standard clincher tires - 240 hub and ProLock Squorx ProHead spokes built with radial lacing - Factory installed tubeless-ready tape - Includes titanium RWS skewer, tubeless valve and Swissstop BXP blue brake pads

In spirit of constantly improving, we've taken one of our most popular wheels and updated the rim to tubeless and slightly increased the inner rim width. Now amazing value and performance includes modern tire options. - Professional tubeless tape installation included - 19mm inner width Specifications: - Hub/Brake Compatibility: Rim Brake - Color: Black - Wheel Size: 700c - Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - ISO Diameter: 622 / Road / 29" - Rear Axle: QR x 130mm - Valve: Presta - Rim Width (Internal): 19 - Tire Type: Tubeless Ready Clincher

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs Specs: - Wheel Tire Type: Tubeless Ready - Wheel-Brake Comp.: Disc IS 6-bolt - Rim Material: Aluminum - Spoke Type: Sapim D-Light - Valve: Presta - Rim Construction: Double wall

Being a company of mountain bikers, when Race Face set out to design a new wheel the goal was simple: make the wheel they want to ride. R is for rally. HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster - Wider bearing stance - 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Each pawl has its own spring - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - 30mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - New stronger alloy for highest impact resistance of any Race Face or Easton rim - High gloss black water transfer logos

Race Face's first carbon wheelset comes to market during peak enduro, meaning people are hitting the trails as hard as they can at all angles. Striking the balance between shred-ready and climb-crushing, Race Face incorporated a generous 31mm internal width for a trail-stomping footprint, a durable carbon layout built for enduro style abuse, and an offset spoke hole layout delivering improved tension balance to up the sturdiness. With the Vault Hub’s super fast engagement, long bearing life and spoke flanges designed for maximizing lateral stability, you can take your rally to the next level. Get ready to be fast in every direction. 2 year no fault guarantee HUB - Large oversize flange for improved bracing angle - Larger bearings - No bearing adjuster needed - Wider bearing stance 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Independently sprung pawls - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - Full carbon fiber construction - 31mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - High gloss black water transfer logos

Find the road less travelled on the new EA70 AX. Joining forces with the EA70 and EC70 AX Bar in our AX adventure road line, the new EA70 AX wheel has the durability to withstand trail riding but is translated to drop bar applications with center lock hubs and 11-speed road compatibility. From bikepacking adventures loaded with gear, to washboarded gravel descents with only your wheels and tires providing the compliance, we have you covered. The welded tubeless ready rim boasts a generous 24mm internal rim width that increased tire volume and gives an optimal tire profile for 35 to 50C tires. It’s the perfect wheel to round out any adventure drop bar build.

- Position Rear - Wheel Diameter/ISO 26'' / 559 - Axle Type QR - Hub Spacing 135mm - Wheel-Brake Comp. Rim - Freehub Body Freewheel -Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 18.4mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Formula FM-31-QR - Wheel Weight - - Spoke Type Stainless - Valve Schrader - Rim External Width 24.4mm - Depth 16mm - Rim Model Alex DM18 - Skewers Included Yes

- Position Front - Wheel Diameter/ISO 700C / 622 - Axle Type Bolt-on - Hub Spacing 100mm - Wheel-Brake Comp. Rim - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 19mm - Rim inner width range 0-21.9mm - Rim Color Silver - Rim Drilling 32 - Hub Model Formula TH-50 - Wheel Weight - - Spoke Type Stainless - Valve Presta - Rim External Width - - Depth 35mm - Rim Model Evo E-Tour 19

The Rampage rear wheel rolls on a four-bearing sealed cassette hub with 14mm chromoly axle. It's hand-laced to a 36-hole Rampage double-wall rim, and features a 9T chromoly driver with 3-pawl system. - Axle: 14mm chromoly - Driver: 1-pc chromoly RHD, 9T - Driver Bearings: 6802 (x2), verify bearing number on side of rubber seal - Driver Pawls: 3 Pawl - Driver Spring: Wraparound (x1) - Hardware: Steel (17mm wheel nuts) - Hub Shell Bearings: 6902 (x2) verify bearing number on side of rubber seal - Drilling: 36H

ENVE AM30 Carbon Wheelsets use a 30mm inside width rim that is tuned for compliance and damping for performance on All-Mountain, Enduro, and Trail riders. - 30mm internal rim width - Gravity rated impact strength - Rim shape tuned for compliance and damping - Wide Hookless Bead Anti-pinch flat technology

Control and stability for enduro riding. Details - Wheels sold individually not in sets. - Tuned Front and Rear Alloy Wheel System for enduro riding and racing. - Front- and rear-specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. - Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning. - Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip. - Welded and sleeved rim joint for additional strength.

- Full carbon fiber construction - 32mm Internal width - Tubeless ready rim (tape and valves installed) - 45mm Offset improves spoke tension balance and wheel stiffness - High gloss black logos and interchangeable vinyl decals - Single spoke length for entire wheel - Hub and bearing system designed and validated for longevity, smoothness, low drag, and zero play - 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - One length spoke used throughout wheelset (F&R)

- Position Rear - Wheel Diameter/ISO 700C / 622 - Axle Type QR - Hub Spacing 135mm - Wheel-Brake Comp. Rim - Freehub Body Shimano HG - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 19mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 32 - Hub Model Shimano Acera FH-T3000 - Wheel Weight - - Spoke Type DT Stainless - Valve Presta - Rim External Width 24mm - Depth 17.5mm - Rim Model Mavic A119 - Skewers Included Yes

Sta Tru Rear Wheel - 104mm spacing - Includes 18 tooth rear cog - Single Wall rim - Hub/Brake Compatibility: Coaster Brake - Wheel Size: 12-inch - Cassette Body Type: 3 Prong Cog - ISO Diameter: 203 / 12.5-inch - Rim Width (Internal): 24 mm - Tire Type: Clincher - Rear Axle: 5/16-inch x 104mm

Control and stability for enduro riding. Details - Wheels sold individually not in sets. - Tuned Front and Rear Alloy Wheel System for enduro riding and racing. - Front- and rear-specific wheels tuned and optimized to address the specific performance requirements and loads of mountain bike riding. - Compliant tuned front wheel improves handling and maximizes grip and control in turns. Wider inner rim width supports wider tire profile in front, increased volume and contact patch, and rounds tire profile to enhance turning. - Stiff tuned rear wheel supports peak loads and enhances stability and tracking at speed. Narrower inner rim width supports narrower tire profile in rear, improves rolling resistance, and sharpens tire edge for grip. - Welded and sleeved rim joint for additional strength.

Each component of this wheel has been optimized in the wind tunnel in order to improve its aerodynamic performance. It therefore delivers multiple benefits that can be noted on different routes, from the most demanding of sprints to relaunching after a bend, while still ensuring efficiency on the flat and now also suitable for the hardest uphill finishes! It is a turning point in the all-rounder segment: a truly multi-purpose wheel. The wheel features carbon rims with a unidirectional aerodynamic finish, new aerodynamic aluminum hubs, and the ceramic USB cup-and-cone bearing system: every design choice has been made with a view to optimizing performance. The profile of the rim, which has an internal diameter of 19 mm, corresponds perfectly with 23 mm, 25 mm and 28 mm tyres. In addition, with the 2-Way Fit version, Campagnolo offers its tried-and-tested technology with full compatibility with clincher and tubeless tyres. While the key purpose of these wheels is to deliver extreme performance, safety is also guaranteed thanks to the G3 spoking system with double spokes on the left of the front wheel, to ensure balanced and safe braking in all conditions. - Cassette Body Type: Campagnolo 10/11/12 Speed - Wheel Size: 700c - ISO Diameter: 622 / road / 29" - Valve: Presta - Rim Width (Internal): 19 - Tire Type: Tubeless Ready Clincher, Clincher

Rims: Alex AT490 700C - ETRTO 622-17 - External width: 22mm - Inner width: 17mm - Profile height: 24mm - CSW Machined Sidewall - TRS Tubeless Compatible - For Presta valve - 32 holes Front hub: Shimano Sora HB-RS300 - 9x100mm - Angular contact bearings - Contact sealed hub - Quick Release Binder (Internal Cam) included Assembled in North America by experienced wheel builders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

Rims: WTB CZR i30 Carbon 29" - ETRTO 622-30 - Inner width: 30mm - Torayca T700 UD carbon fiber for stiffness and compliance - Asymetric and angled spoke hole drilling - Externally reinforced spoke bed - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip (included) - 32 holes Front hub: Shimano XT HB-M8110-B Boost - 15x110mm (Axle not incl.) - Center Lock (6-Bolt adapter incl.) - Polished angular contact bearings - Contact sealed hub Rear hubs options: Shimano XT FH-M8010-B (Boost, HG) / FH-M8110-B (Boost, MS) / FH-M8130-B (SuperBoost, MS) - Center Lock (6-Bolt adapter incl.) - Quick Engagement Freehub, 36 Points of Contact, 10 deg. engagement - HG compatible 10/11 speed MTB (12 speed HG with 1.85mm spacer, not included) - MS compatible 12 Spd Micro Spline Sold in Pair, including: - Tubeless Valve (x2) Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), Polyax Nipples (Black)

Proterra Tough i30 wheels keep the trail in check while everything else blurs by in the periphery. Reinforced by our proven Dual I-Beam support, Proterra Tough rims feature a 30mm internal width to provide higher tire volume while also increasing sidewall support at lower pressures. High-quality EZO sealed bearings are designed to endure through seasons of aggressive riding, while a responsive 6-pawl freehub provides the snappy 3.7 degrees of engagement you demand when cranking out of corners. Choose Proterra Tough when you need a wheel that won't let you down. - 30mm inner rim width with 32 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge brass nipples provide bomber durability, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - 6-bolt rotor mounts - Top-tier EZO sealed bearings

Proterra Light i23 wheels check all the boxes for a fast and light alloy wheelset. The 23mm inner rim width provides the optimal tire profile for adventure road and gravel tires ranging from 30-42mm. Its open-cavity profile features thin, weight-optimized walls that provide the perfect blend of stiffness, resilience, and efficiency. Subdued graphics on a bead-blast finish ensure these wheels won't clash with the colors of your dream bike. We didn't skimp on hubs either. Top-tier EZO bearings, a swift 6-pawl freehub, and 3.7 degrees of engagement provide the look, sound, and feel you expect of a high-end tubeless wheelset. - 23mm inner rim width with 28 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim that is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge alloy nipples minimize rotational weight, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - Center Lock rotor mounts

Zipp's 3ZERO MOTO carbon 29 enduro/trail wheelset is inspired by moto to provide riders with the control and durability required for pure trail speed. This wheel and its MOTO Technology have already been proven by multiple victories in the Enduro World Series with our pioneering partnership with the Lapierre Zipp Collective. While other wheel brands limit their focus to traditional box-section rim designs, Zipp engineers—uninhibited by legacy technology—took a different approach. They looked to motorsports as a model. Zipp's Moto Technology's single-wall rim is the optimal approach for an enduro/trail wheelset. The resulting rim provides something we call "ankle compliance." Imagine a runner rounding a sharp turn, the ankle naturally flexing to maintain grip as the runner leans. The 3ZERO rim can locally flex to stay parallel to the ground during cornering, increasing traction like a human ankle adjusts while running. This ability to twist locally allows it to deflect during single bead impacts without the rider getting bounced offline. 3ZERO MOTO helps you take the most direct route, saving seconds when and where they count most. At the center of the 3ZERO MOTO is the ZM2 hubset. This German-engineered hubset features 12 pawls and 132 points of engagement for a quicker response. The hub's improved seal design means better durability on rough terrain. Quarq's TireWiz is an add-on option for 3ZERO to dial in your pressure for an even more compliant ride. - Higher impact resistance - Reduced chance of pinch flatting - More traction in rough corners - Smoother ride in rocky terrain - Ability to run lower tire pressure - Reduced rider fatigue - Frustration-free tire installation - Rim is designed for compliance, creating the feel of extra suspension - German-engineered hubset features 12 pawls and 132 points of engagement for quicker response and also has improved durability - Lifetime Warranty

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs Specs: - Hub Model: E-SYNC - Freehub Body: Shimano HG - Wheel Tire Type: Tubeless Ready - Wheel-Brake Comp.: Disc IS 6-bolt - Rim Material: Aluminum - Spoke Type: Sapim D-Light - Valve: Presta - Rim Construction: Double wall

- Light enough to take XC racing but was born from research and testing on the Enduro World Series circuit, making it a great rim for anyone looking to improve both descending and climbing - Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 28mm internal width ideal for 2.2-2.5" tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs