Skip to main content

Otso Fenrir Ti Drop Bar 12 Speed

Otso Fenrir Ti Drop Bar 12 Speed
$5,120.00
Please select options Unavailable

Details

Fenrir isn't your typical mountain bike. This one was designed from the trail up for bikepacking. Where most bikes can feel wobbly when loaded with a week's worth of gear, Fenrir rides confident and strong as ever. Build it with drop bars or flat bars, suspension fork or rigid fork, dropper post or rigid seatpost, gears or single speed, and a mechanical or electronic drivetrain. A tire clearance of 29” x 2.6” or 27.5” x 2.8” keeps the Fenrir rolling on rough terrain, while extra frame and fork braze-ons are ready to carry gear for days or weeks on the trail. Like all Otso bikes, the Fenrir has adjustable geometry via the patented Tuning Chip rear dropout system that makes the bike as adaptable as its rider.

**************************************************************
Angry Catfish's website is tied into Otso's available inventory. If you are visiting our store to view the bike, please contact us before coming, to ensure we have what you're looking for.
**************************************************************

DESIGNED FOR BIKEPACKING

Every last feature of Fenrir Ti is optimized for bikepacking. The titanium frame is strong, smooth, and lighter than steel. It can be built with flat bars or drop bars depending on your affinity for large handlebar rolls. Single speed is an option for folks who like simplicity while touring. It has extra mounts on the frame and fork for hauling all the gear you'll need for days (or weeks) on the trail. The frame and fork can clear 29" x 2.6" or 27.5" x 2.8" tires for trails that are especially gnarly. No matter your destination and how long it takes to get there, Fenrir Ti is ready.

VERSATILITY

While all Otso bikes are known for their versatility, the Fenrir might be the most versatile yet. It was designed to accommodate drop bars with a 50mm stem or MTB bars with an 80mm stem. It can be build with gears or single speed, with a suspension fork or rigid, with a mechanical or electronic drivetrain, or with a dropper or rigid seat post. The ability to fully customize the build of the bike makes the Fenrir as versatile as its rider.

FENRIR WITH FLAT BARS

When built with MTB bars, Fenrir rides like a 90s XC bike. It's fun and lively, yet efficient and Capable with a capital C. It can handle any sketchy descent or technical climb with ease. Because the top tube is relatively short for a mountain bike, a longer stem (80-90mm) is ideal for maintaining reach. Ride it on your local singletrack or load 'er up for that backcountry tour that you've been dreaming about –you know the one. However you choose to build it, Fenrir will ride any road/trail on the map and carry all the gear to get you there.

FENRIR WITH DROP BARS

Fenrir was designed with the option to be built with drop bars or MTB bars. When configured with drop bars, the Fenrir rides like an extra-capable gravel bike. The relatively longer top tube means a shorter stem is needed with drop bars to align with the rider's preferred reach. It can be built with standard road/CX/gravel bars for rides on local trails or with wider bars to fit a handlebar roll loaded with lots of gear.

SO MANY MOUNTS

A bikepacking bike needs to be able to carry all the gear for days or weeks on the trail. Fenrir has mounts for bottles, fenders, and racks. The Enve fork also has three-pack mounts on either side for sharing the load.

CAPABLE GEOMETRY

Pick a trail on the map and ride it. Fenrir has the endurance of a gravel bike, with the stability of a mountain bike. Above all, it is Capable with a capital C so you can stay the course and reach your destination.

DROPPER FRIENDLY

A small port near the bottom of the seat tube allows for the cable routing of a dropper post. If you don't ride with a dropper, you probably won't even notice the port.

AMPLE CLEARANCE

Tires need to meet demands of the trail for traction, stability, and comfort. Fenrir can ride up to 29" x 2.6" or 27.5" x 2.8" tires.

SINGLE SPEED

All metal Otso bikes have the option to be built single speed or with gears. Fenrir is included in that group because it has a small notch on the rear dropout near the Tuning Chip. If you build your Fenrir with gears, but want to convert to single speed later on, we have the single speed Tuning Chip available on our website alongside other accessories. There's no wrong way to build your Fenrir.

Specs

Frame 3Al/2.5V B338 grade 9 titanium
Fork Carbon Lithic Mountain Fork, 15mm thru axle
Headset Wolf Tooth Performance Headset
Rims/Wheels DT Swiss M1900 29"
Tires Schwalbe Racing Ralph 29x2.35 Super Ground
Crankset Race Face Aeffect, 34T Chainring
Rear Derailleur Shimano SLX M7100, 12-speed
Rear Cogs Shimano SLX M7100, 11-51T, 12-speed
Shifters Shimano GRX 600 mechanical, 12-speed
Handlebars Lithic Corundum aluminum compact drop with 16° flare
Tape/Grips Anti-Slip Gel Bar Tape
Brakes Shimano RX400 Hydraulic

* Subject to change without notice.