White Industries 11 speed Titanium Freehub - Shimano

Our freehub bodies (also referred to as “drivers”) are made from 6-4 Titanium and are only compatible with White Industries hubs. These modern versions are made to work with 11 and 12 speed cassettes (but can work with older cassettes) and are compatible with all our current hubs and some older models. They feature pockets for 3 pawls/springs and will accept 24T or 48T pawls depending on the drive ring in your hub. Most of the hubs we’ve made in the last 3 years will have the 48T drive ring and pawls installed but it’s always good to confirm what you have by counting the teeth in the drive ring (inside the hub body) or calling us for guidance.

It is possible to retrofit your hub to a 48T drive ring and pawls but it requires a drive ring tool which ain’t cheap (RRINGTL24) in addition to the parts. You will also have to confirm your hub is compatible with these newer freehub bodies by calling us to help you figure it out.

- Shimano Hyperglide 8/9/10/11 speed
- Comes with a 1mm spacer for use with 8/9/10 speed cassettes

*Freehub bodies include bearings and springs, not pawls. Your old pawls will work fine unless damaged.