Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Bottles/Cages

$127.00
HSF / AERIA hydration system is designed to seamlessly integrate with the Aeria Ultimate Stem (Stem is required for installation) - combined with the Aeria Ultimate aerobar, this system provides a fully integrated front end “super bike” solution for any bike. This BTA system features the race proven “no splash” fill port, a straw magnet mount for streamlined aero over the top of the system, a bite valve for fluid control and a removable computer mount. - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 30oz (857ml) - Only Compatible With: Profile Design Aeria Ultimate Stem (70mm or 100mm - ONLY) - Weight: 420g
$115.00
The HSF/Aero HC 800+ has been designed to incorporate all the essential features required of an aerobar bottle system along with a couple of premium add-ons. The shape of the bottle has been designed to hide the cage from the wind with minimal frontal area. - Flexible hose with bite valve and magnetic retention - Removable Garmin mount - Rear can be unscrewed for easy cleaning - Fill port with lid for fast refill and to avoid splashing
$113.00
The FC System was designed with one thing in mind: to bring together the most compelling details into one all-inclusive hydration system. - Streamlined Storage: New Profile Design FC Hydration Systems were designed with one thing in mind to create a clean front-end solution that thoughtfully integrates hydration, nutrition and electronic needs. Integrated storage streamlines nutrition needs into rear airfoil compartment. - Forward Computer Mount: Computer mount positions perfectly at the front of the system for optimal viewing. - Sealed cartridge bearings - No-Splash Refill Port: Brand new patent-pending refill port shields splash back. - Dual Straw Positioning: Strategically flexible to fit your preferences. A simple turn of the dial positions straw on the right or left side of the bottle. - Convertible Straw: Swap straw with gap cap to place straw in the front or rear of bottle. Specs - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 25oz (739ml) - Width: 65mm-140mm (center to center) - Weight: 250z (397g)
$100.00
Push the envelope without tipping the scales. Weighing in at just 240 grams, our Podium Titanium bike bottle is where form and function meet, combining unparalleled strength and feather-light agility to help you find your flow even faster. Made from premium, vacuum-insulated titanium, it's built from the ground up to meet the demands of discerning riders who want to curate their kit down to the very last detail. The reliable double-wall construction keeps your drinks refreshingly cold, so you're ready to tackle scorching hot rides and the most relentless roads without breaking a sweat. The high-flow cap provides effortless hydration with no squeezing required, and the leakproof lockout feature provides worry-free protection from spills, and an optimized cage fit ensures a secure placement on every pulse-pounding ride. Made from BPA-free materials, its easy-to-clean design means you'll spend less time scrubbing and more time in the saddle. Designed for those who push boundaries, the Podium Titanium is the peak of performance, effortless style, and precision-engineering. Elevate your ride and conquer new horizons with the exceptional quality of the Podium Titanium.
$89.90
Made to fit any type of saddle, the Vision Trimax rear hydration system can suit any need. With the option to mount two extra high grip cages, no rider will go thirsty whether it’s in a race or riding with friends. - Modular saddle drink system universally fits both traditional and snub-nose saddles - Multiple mounting and lashing points can be customized for water bottles, CO2 pumps, accessory bags, and tie-strap combinations - 3-position (40 degrees) saddle rail mounting options - Bottle cages are mounted for optimized accessibility and ideal aerodynamics - 5-position (40 degrees) bottle cage tilt adjustability - Precision-made alloy frame with corrosion-resistant hardware - Includes Quiver Saddle Mount and two High Grip Cages
$88.00
- CFD refined integrated bottle with Bento box and computer mount - Articulated straw mount to allow precise angulation and unobtrusive fold-away - Forward computer mount with easy line-of-sight - Included Vision Drop Bottle System and Extension Mount - Metron TFE compatible with adaptor SIZES - 700ml FINISH - Matte black - Color graphics WEIGHT - 335 grams
$88.00
Zipp's SL Speed Carbon Bottle Cage features an ultra-light (18g) design engineered for flexibility and strength. Optimized for both side and direct bottle entry the SL Speed cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle.
$88.00
Designed and engineered specifically for the Vuka BTA mount, the Zipp Vuka Carbon BTA bottle cage is constructed completely from UD carbon fiber, for low weight and strength, as well as super secure bottle fitment. It's engineered to virtually eliminate bottle launch.
$85.00
Never lose a bottle again with these incredible royal purple titanium bottle cages. This lightweight design doesn't mark your bottles, allows easy access, and holds your bottles on the worst terrain. Specifications - Single Cage - Bourbon anodized finish - Seamless 3-2.5 titanium tubing - 30 g/cage - 21mm fore/aft adjustment - Hand bent in Indianapolis - Easy in-and-out - Extremely secure design - Laser welded - Optimized for purist bottles In our quest to create the ultimate bottle cage, we found ourselves completely fascinated by the look, feel, and durability of tubular titanium construction. This combination of design characteristics produces a cage that has better retention on gravel and other harsh surfaces and has proven to be the superior design when mounted on the underside of the down tube, so common in adventure riding and touring. While classic in appearance, this material, and its manufacturing are as complex and high tech as it gets. Cleaning and care: Oils from your hands and fingers can change the anodized color. To revive color and/or clean the cages (and straws), use rubbing alcohol and a soft cloth. Do not use abrasive products, this will damage the anodized finish. Please note that anodized titanium is only as hard as the titanium itself, and is less hard than many types of sand or abrasives found in sand and soil, including aluminum oxide and garnet which are naturally occurring and are harder than steel. Titanium anodize continually exposed to abrasion by these sand materials will eventually scratch and begin to wear and will not be covered under warranty. Routine cleaning of the cages and cleaning of bottles is recommended to remove any embedded abrasive particles which can accelerate this wear.
$85.00
Never lose a bottle again with these incredible unicorn titanium bottle cages. This lightweight design doesn't mark your bottles, allows easy access, and holds your bottles on the worst terrain. - Single Cage - Unicorn anodized finish - Seamless 3-2.5 titanium tubing - 30 g - 21mm fore/aft adjustment - Hand bent in Indianapolis - Easy in-and-out - Extremely secure design - Laser welded - Optimized for purist bottles In our quest to create the ultimate bottle cage, we found ourselves completely fascinated by the look, feel, and durability of tubular titanium construction. This combination of design characteristics produces a cage that has better retention on gravel and other harsh surfaces and has proven to be the superior design when mounted on the underside of the down tube, so common in adventure riding and touring. While classic in appearance, this material, and its manufacturing are as complex and high tech as it gets. Cleaning and care: Oils from your hands and fingers can change the anodized color. To revive color and/or clean the cages (and straws), use rubbing alcohol and a soft cloth. Do not use abrasive products, this will damage the anodized finish. ?Please note that anodized titanium is only as hard as the titanium itself, and is less hard than many types of sand or abrasives found in sand and soil, including aluminum oxide and garnet which are naturally occurring and are harder than steel. Titanium anodize continually exposed to abrasion by these sand materials will eventually scratch and begin to wear and will not be covered under warranty. Routine cleaning of the cages and cleaning of bottles is recommended to remove any embedded abrasive particles which can accelerate this wear.
$85.00
All the benefits of a highly secure titanium bottle cage with a black finish that won't wear away. Other secure cages don't allow easy access to bottles, scratch your bottles, etc, but not SICURO. • 30g • Black Cerakote coating • Will not chip, break, or fade • Easy in-and-out • 3-2.5 titanium tubing • Hand bent in indianapolis • Laser welded • Extremely secure design
$80.00
Never lose a bottle again with these incredible rainbow titanium bottle cages. This lightweight design doesn't mark your bottles, allows easy access, and holds your bottles on the worst terrain. In our quest to create the ultimate bottle cage, we found ourselves completely fascinated by the look, feel, and durability of tubular titanium construction. This combination of design characteristics produces a cage that has better retention on gravel and other harsh surfaces and has proven to be the superior design when mounted on the underside of the down tube, so common in adventure riding and touring. While classic in appearance, this material, and its manufacturing are as complex and high tech as it gets. Cleaning and care: Oils from your hands and fingers can change the anodized color. To revive color and/or clean the cages (and straws), use rubbing alcohol and a soft cloth. Do not use abrasive products, this will damage the anodized finish. Please note that anodized titanium is only as hard as the titanium itself, and is less hard than many types of sand or abrasives found in sand and soil, including aluminum oxide and garnet which are naturally occurring and are harder than steel. Titanium anodize continually exposed to abrasion by these sand materials will eventually scratch and begin to wear and will not be covered under warranty. Routine cleaning of the cages and cleaning of bottles is recommended to remove any embedded abrasive particles which can accelerate this wear. Specifications - Single Cage - Rainbow anodized finish - Seamless 3-2.5 titanium tubing - 30 g - 21mm fore/aft adjustment - Hand bent in Indianapolis - Easy in-and-out - Extremely secure design - Laser welded - Optimized for purist bottles
$79.99
Special design facilitates the insertion of the bottle and keeps it firmly in place until the next drink. - For bottles up to 74mm in diameter - Weight: 35g
$75.00
Zipp's Vuka Alumina BTA Mount with QuickView is cleverly designed to sit between the arms for aerodynamic efficiency while riding. The 104-gram, rock-solid aluminum mounting frame includes a QuickView quarter-turn mount for all Garmin Edge series head units, and is compatible with Zipp's Vuka BTA Carbon Water Bottle Cage (each sold separately). Mounting hardware is laser etched with a precision alignment scale, allowing wide-range adjustability so you can focus on the road ahead.
$70.00
Carbon Water Bottle Cage For road, mountain, cyclocross, and gravel riders who prefer rolling hydration using a water bottle. - Ultra-lightweight construction that provides a secure hold in all conditions - Access Style: Top - Mount Type: Bolt-On - Weight: 19g
$70.00
Each SICURO Ti cage is hand-made in the USA at our Indianapolis, IN headquarters using custom manufacturing processes and a state-of-the-art laser welder, the first of its kind in the bicycle industry. Made from aerospace-grade titanium tubing, these cages feature unique slotted mounting eyelets that allow fore/aft adjustability on the bike. The second-generation Ti Bottle Cage has a base-plate change to add more flexibility to the positioning on the frame, allowing usage for smaller frames. In our quest to create the ultimate bottle cage, we found ourselves completely fascinated by the look, feel, and durability of tubular titanium construction. This combination of design characteristics produces a cage that has better retention on gravel and other harsh surfaces and has proven to be the superior design when mounted on the underside of the down tube, so common in adventure riding and touring. While classic in appearance, this material, and its manufacturing is as complex and high-tech as it gets. - Seamless 3-2.5 titanium tubing - Extended adjustment mounting: up to 21mm fore/aft - Weight: 30 grams - SILCA Shield Warranty included covering your cage for 25 years! - Please note: bolts are not included
$70.00
An absolute masterpiece, this cage screams style. The Fly Cage Carbon’s clean lines and hand-painted edges really stand out. No cage outperforms the Fly Cage Carbon with LockTight wings, which hold bottles securely while keeping them accessible. - 100% 3k Carbon - LockTight Wings - Hand-painted - Road and MTB approved - High-end and durable
$69.99
Special design facilitates the insertion of the bottle and keeps it firmly in place until the next drink. - For bottles up to 74mm in diameter - Weight: 35g
$69.95
- The Wolf Tooth Morse Cage is a lightweight and low profile way to reposition bottle cages. - Named for its dot-dash-dot-dash mounting pattern, the Morse Cage base plate offers four positions across 32mm of vertical adjustment, fully capturing one mounting bolt in every position to prevent movement. - Can be bent back into shape if damaged, and is available in both titanium and stainless steel
$66.00
Thick Wall Hollow Tube Titanium: - Weight without Straps: 80 grams - Stamped titanium back plates - 4-bolt mount with slots for hose clamp attachment - Available with two King Cage branded 20" Voile Straps or without straps (straps weigh 60 grams - Includes four 1 inch O-rings to attach King Cage branded Voile Straps - Dimensions: 2 1/2” wide x 15” tall, and the shelf sticks out ~ 2 1/4” Mounting is the same as our Manything Thing Cage. Please watch the below video for instructions;
$66.00
Expand the hauling capabilities of you bicycle with this lightweight and heavy duty carrier. It's great for attaching gear of larger water bottles on your next adventure. - Titanium - 3-bolt mount - Includes straps (colors vary)
$66.00
The Bottle Lowering Cage is a problem-solver for small frames or where space is limited. Lowers bottle 1.1" to allow a lower mounting position to increase bottle clearance. - Lowers the bottle ~1.1 inch - Titanium
$64.99
- Durable fiber-reinforced Composite Matrix construction - Optimized side-load design for easy access in compact frames - Available in right-side configuration only - Integrated storage container - CO2 cartridge holder on both sides of the cage - Integrated storage container includes CO2 head, V Pro 17 multi-tool with tubeless reamer, and tire plug kits - Includes two 20g CO2 cartridges
$60.00
The HSF Aerodrink 880 follows in the footsteps of the Aerodrink with updated features. This Front-end hydration system easily mounts between aerobars so you don't have to deviate from the aero position to stay hydrated. - Flexible hose with bite valve - Flip cap for refill port - Secure mounting bracket and easy to remove bottle - Straw can be mounted in either the front or rear - Shape design to improve airflow onto the frame - Bottle Construction: BPA-Free, Food safe HDPE Bottle - Bottle Capacity: 30oz (880ml) - Compatibility: Aerodrink BTA bracket - BTA Construction: Injected nylon/glass fiber construction - Extension Width Requirement: 65mm - 140mm (center - center) - Weight: 289g (System), 130g (Bracket Only)
$60.00
- Whisky Carbon Water Bottle Cage - Cage Material: Carbon - Mount Type: Bolt-On - Weight: 28 grams (C3), 25 grams (C2), 30 grams (C1)
$59.99
The TWIST bottle revolutionized the water bottle. Without the conventional bottle cage, this magnet-mechanical bike bottle system offers a new kind of freedom in handling and application. It is simply released from the bike with an easy “TWIST” movement and just as easily reattached by bringing together the magnetic holds, which include a mechanical locking system. If the bike has no thread inserts at all or if they are already blocked, the TWIST bottle 590 comes with the TWIST uni base. This universal frame adapter can be easily attached to any pipe with a width of 28 – 62 mm thanks to the long TPU zip ties. The smooth rubber back of the universal bike bottle holder protects your frame against scratches and helps to hold the uni base in place. Includes the TWIST uni base for attachment to any tube with re-closable zip ties. - 590 ml / 19.95 fl oz - Always BPA-Free & BPS-Free - Leak-proof, self-sealing bottle cap with high-flow valve - Includes removable dust cap - Includes removable connector - Includes TWIST Universal Bike Base for attaching to any tube - Compatible with all TWIST Bases - Bottle is dishwasher-safe without Connector - Proposition 65 Approved
$59.99
- Durable fiber reinforced Composite Matrix construction. - Optimized side-load design for easy access in compact frames. - Available in right-side configuration only. - Integrated storage container. - CO2 cartridge holder on both sides of the cage (CO2 cartridges sold separately) - CO2 inflator head - V Pro 17 multi-tool with tubeless reamer and tire plug kits
$59.99 $79.99 25% Off
Never lose a bottle again with these incredible royal purple titanium bottle cages. This lightweight design doesn't mark your bottles, allows easy access, and holds your bottles on the worst terrain. Specifications • Single Cage • Royal Purple anodized finish • Seamless 3-2.5 titanium tubing • 30 g/cage • 21mm fore/aft adjustment • Hand bent in Indianapolis • Easy in-and-out • Extremely secure design • Laser welded • Optimized for purist bottles Description In our quest to create the ultimate bottle cage, we found ourselves completely fascinated by the look, feel, and durability of tubular titanium construction. This combination of design characteristics produces a cage that has better retention on gravel and other harsh surfaces and has proven to be the superior design when mounted on the underside of the down tube, so common in adventure riding and touring. While classic in appearance, this material, and its manufacturing are as complex and high tech as it gets. Cleaning and care: Oils from your hands and fingers can change the anodized color. To revive color and/or clean the cages (and straws), use rubbing alcohol and a soft cloth. Do not use abrasive products, this will damage the anodized finish. ? Please note that anodized titanium is only as hard as the titanium itself, and is less hard than many types of sand or abrasives found in sand and soil, including aluminum oxide and garnet which are naturally occurring and are harder than steel. Titanium anodize continually exposed to abrasion by these sand materials will eventually scratch and begin to wear and will not be covered under warranty. Routine cleaning of the cages and cleaning of bottles is recommended to remove any embedded abrasive particles which can accelerate this wear.
$59.95
Your water bottle is one of the most important pieces of equipment on your bike. Keep it stable with the carbon fiber Ritchey WCS Carbon Water Bottle Cage. This lightweight cage was designed by Tom Ritchey to perform on the roughest roads or the most gnarly mountain bike trails. - Carbon bottle cage shape designed by Tom Ritchey - Extra strong grip, perfect on the roughest or smoothest rides - Matte UD carbon with black or white logos - 32g
$57.00
This rear-mounted hydration system holds two bottles and attaches directly in front of seatpost for easy hydration on the go. - Full angular adjustment allows bottles to be rotated - 6061-T6 aluminum construction - Brackets included to mount two Co2 cartridges - Fits 31.6mm to 27.2mm seatpost with shims (included) - Includes two cages and 6061-T6 Aluminum clamp and extension
Page 1 of 9 Next page