Parts & Accessories

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts

The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads

B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base

B-RAD Half Bottle Mounts allow for cargo customization and cargo optimization. Designed to work in tandem with B-RAD Base, the Half-Bottle Adaptor moves the bottle over about half a bottle radius to make it easier to access. The Accessory strap mounts can be mounted to the other side providing a mounting point for additional items. - Mounts to the B-Rad base mount (not included

Sold as 3 pairs (6 pieces) Foam spaces help to push your bar bag away from the bars, freeing up room for your cables, fingers, bell, or heck, even a small lizard! Our spacers are Die-cut right here in the UK from a very high quality and high-density PE Foam. We believe this makes them the best made in UK spacers available. Perfect for Lil Prestos or if you're running your Shazam on the front. Made in Birmingham, UK

Description 20% thicker, 25% wider. The XL Series straps aren't only bigger, they are also the strongest ever. These Voile Straps® are made of the same tough stretch polyurethane, including the UV-resistant additive that increases their lifespan. Their heavy-duty heat-treated aluminum buckle features a slim profile for packing efficiency and extra durability. Few things in life are as reliable as the original Voile Strap®. Over the last 30 years they have become the ultimate alternative to duct tape, nylon straps, and bungee cords. On the job, in the outdoors, and everywhere in between: they are the definitive way to secure, bundle, and repair almost anything on the go. Specifications: - Usable Length Range: 7.1in — 19.5in / 18.1cm — 49.5cm - Material: UV-Resistant Polyurethane - Buckle: Hardened Aluminum

The all-new NANO Series, our smallest straps yet! 1/2" wide, this micro version of our time tested tiedown offers the same versatility in an even smaller package. Inspired by a few clever users’ modifications to our standard Voile Straps, the all-new Voile Straps Nano Series is designed with the minimalist in mind. They are available in three sizes, each of which will accommodate a load as narrow as a ballpoint pen. They feature the same weatherproof and UV-resistant material that you know and love. They are textured for extra grip, and are fitted with a nylon buckle. So when you need a tiny strap that will overdeliver, the Nano Series helps you keep it together. • Non-Marring • Non-Conductive • Won't Slip • Holds Tight • Super Strong • UV Resistant • Works in Extreme Weather • Daisy Chain Together SPECIFICATIONS - Load Circumference Min-Max: 1in — 10.4in / 2.5cm — 26.3 cm - Material: UV-Resistant Polyurethane - Buckle: Super Tough Nylon

The all-new NANO Series, our smallest straps yet! 1/2" wide, this micro version of our time tested tiedown offers the same versatility in an even smaller package. Inspired by a few clever users’ modifications to our standard Voile Straps, the all-new Voile Straps Nano Series is designed with the minimalist in mind. They are available in three sizes, each of which will accommodate a load as narrow as a ballpoint pen. They feature the same weatherproof and UV-resistant material that you know and love. They are textured for extra grip, and are fitted with a nylon buckle. So when you need a tiny strap that will overdeliver, the Nano Series helps you keep it together. • Non-Marring • Non-Conductive • Won't Slip • Holds Tight • Super Strong • UV Resistant • Works in Extreme Weather • Daisy Chain Together SPECIFICATIONS - Load Circumference Min — Max: 1.25in — 14.3in / 3.2cm — 36.3cm - Material: UV-Resistant Polyurethane - Buckle: Super Tough Nylon

The all-new NANO Series, our smallest straps yet! 1/2" wide, this micro version of our time tested tiedown offers the same versatility in an even smaller package. Inspired by a few clever users’ modifications to our standard Voile Straps, the all-new Voile Straps Nano Series is designed with the minimalist in mind. They are available in three sizes, each of which will accommodate a load as narrow as a ballpoint pen. They feature the same weatherproof and UV-resistant material that you know and love. They are textured for extra grip, and are fitted with a nylon buckle. So when you need a tiny strap that will overdeliver, the Nano Series helps you keep it together. • Non-Marring • Non-Conductive • Won't Slip • Holds Tight • Super Strong • UV Resistant • Works in Extreme Weather • Daisy Chain Together SPECIFICATIONS - Load Circumference Min-Max: 1in — 7.4in / 2.5cm — 18.7cm - Material: UV-Resistant Polyurethane - Buckle: Super Tough Nylon

Description These Voile Straps® are made of tough stretch polyurethane, with a UV-resistant additive to increase their lifespan. Their Super Tough nylon buckle is non-marring, non-conductive, and non-reflective. Few things in life are as reliable as the original Voile Strap®. Over the last 30 years they have become the ultimate alternative to duct tape, nylon straps, and bungee cords. On the job, in the outdoors, and everywhere in between: they are the definitive way to secure, bundle, and repair almost anything on the go. Specifications: - Usable Length Range: 4.3in — 9.4in / 10.7cm — 23.7cm - Material: UV-Resistant Polyurethane - Buckle: Super Tough Nylon

The Original Gear Strap Made in USA Voile Straps will securely hold your cargo where you need it. Strap down gear to your bike frame, handlebars, seat rails, or rack, or upgrade the existing straps on your cargo cage or pack. They’ve become an essential part of our everyday kit. We’ve seen these straps used worldwide on ski trips and bikepacking expeditions, and for everyday uses from backyards to roof racks. These straps will outperform and outlive the nylon webbing, straps, or cords you’re currently using. High performance polyurethane makes these straps durable, UV and moisture resistant, and workable in cold conditions. The slim-profiled buckles are forged of heat-treated aluminum and are both durable and lightweight.

The Rando Pocket is an accessory bag fit to carry a small repair kit, wallet, keys, a cell phone, or a small point-and-shoot camera. Designed as the perfect match for our most revered bicycle bags, the Rando Pocket attaches to our Kestrel Handlebar Bag, Ardea Pack, and Anchor Hip Pack, and mounts to the Wald 137 Front Basket to upgrade any kit. The Rando Pocket is made out of Challenge ECOPAK 100% recycled polyester and contains roughly 1 plastic bottle rescued from ocean beaches. Add versatility to your favorite set-up: The Rando Pocket weaves securely onto the Wald 137 Basket using standard MOLLE attachment and feeds onto our Kestrel Handlebar Bag, Anchor Hip Pack, and Ardea Pack to add space for your small belongings. The Rando Pocket is padded to protect your point-and-shoot camera and is the ideal pouch to keep repair supplies at arm's reach. Because the attachment mechanism is universal to the MOLLE system, our Rando Pocket is the perfect addition to any bag that features MOLLE webbing. Cool Features: - MOLLE attachment - Single-handed closure - Fully padded with closed-cell foam Attaches to the following bicycle bags: - Kestrel Handlebar Bag - Ardea Pack - Merlin Randonneur Bag - Anchor Hip Pack Dimensions: - Measurements: 5.25"h X 4"d - Capacity: .8L - Weight: 2oz Built with: - Recycled ECOPAK™ EPLX400 - Packcloth - Closed Cell Foam - Nylon Webbing

Surly's Junk Straps are basically really long toe straps. They're 120cm woven nylon with a stainless steel buckle. Surly had them made to specification to ensure that they work well and last a long time. They're easy to use and they stay tight. Once you're ready, loosening them is quick and easy. They're light, pack small, and securely and conveniently attach all kinds of stuff to your rack, basket, handlebar, backpack, under your seat, around your thigh…just about anyplace. You can combine them for even longer straps. - Pack of 6

Suitable as a tourniquet or stylish headband in a pinch, the Whip Lash's primary function is to help you attach whatever needs attaching to your bicycle frame. Available in a multi-pack that includes two 550mm lashes and one 695mm lash, the Whip Lash's potential is limited only by your imagination. You could use one to strap your beverage to the down tube when the trail says you ought to keep your hands on the bars. Or you could use another to fix your fishing gear to the top tube when rack space is maxed out. Whatever you get into on or off the bike, they're handy to have around because they're light, compact, and easy to use. Rubberized on one side to keep your stuff from slipping around, the Whip Lash's trimmable design features nylon construction and a simple hook-and-loop style closure.

In case you can’t use a standard dove stay, this longer version will help you out quickly. Height: 26~29mm (from a surface of fender to the center of a bolt)

The EXP Series Direct Mount Thumb Screws allow for quick and easy attachment of Salsa EXP Series Direct Mount Packs to bicycle frames equipped with direct-mount locations. - Can be installed and removed by hand or with allen key - Includes necessary 0.5 mm washers and 4 mm spacers - Sold in packages of two

Lower mount kit for all Salsa's Alternator Racks (sold separately)

Our Silicone tape has lots of uses. It sticks to itself, leaves no adhesive residue, adds grip and padding. Wrap it on frame contact points, use as a chain stay protector, wrap your brake levers, seal blown hoses on your car...the list goes on. This tape bonds to itself for adhesion, once applied it forms a semi-solid wrap and should be considered one application only. It can be easily cut off rather than unwrapped. Sold in 10' rolls in clear.

Made from CR4 Steel with a durable powder coated finish, the Restrap Bumper Bar includes a front grille and 30mm slots on the top and bottom that work seamlessly with the retention straps of bar bags. Also included are 5mm diameter holes on the top and bottom for additional mounting options. The front is curved to allow the fitting of most lights, where the position out the front of the steerer is ideal for forward visibility. - Fits 1-1/8" threadless headsets - Acts as a 3mm headset spacer - 178g

To avoid chafe marks on the handlebars, you can simply re-order these foam pads as a set of 5. CONTENT: - 5x distance pads, grey

Perfect for safe storage of maps, passports, and other important documents while traveling. The dust and waterproof transparent bags are made of UV-, tear-, and crease-resistant fabric with seams as tough as the material itself. They will withstand extreme atmospheric temperatures and repeated use. Also suitable for electronic devices such as GPS, cell phones, or MP3 players. Comes with neck cord and stainless steel eyelets. Available in three sizes (A4, A5, A6).

For all models with the QL2.1 system. If your mounting system-s lower anchoring hook is lost or worn, you can easily replace it with a new anchoring hook. DETAILS: - 1 anchoring hook and mounting screw

For all models, including the Back-Roller and Sport-Roller, with Stealth buckles Need to replace a pair of broken buckle? - 2 plastic buckles (male and female ends, 25 mm, black)

The shoulder strap for your Ultimate Compact, Bike-Box, E-Glow, E-Mate, Velo-Shopper, Trunk-Bag RC or Bike-Tourer is just what you need to carry on once you reach your destination. CONTENT: - 1 shoulder strap with plastic pad

Weatherproof cell pocket that’s designed to work with all Mission Workshop Rucksacks, Arkiv Packs, Cargo bags, and Barrel Duffles. Small size fits standard size phones such as the iPhone 7. Large size can fit most plus size phones such as the iPhone 7+ (with case).

- 4 removable plastic hooks - To tighten, pull inner cord over additional hook - 25cm x 25cm (10" x 10") unstretched - Durable 3.5mm diameter bungee cord

Benno Wheel Guards prevent cargo, and passenger body and clothing from becoming entangled the spinning wheel and spokes.

Benno Rack Pads affix to the Utility rack models with hook and loop fasteners, creating a seating platform for passengers. - Use only with Benno High, or Half Rails, Wheel Guards. - Make sure that no parts of the body or clothing come near moving parts on the bicycle, such as chain, spokes, tires or brakes

Benno Rack Parts

Sporting your favorite bike shop logo, these Voile Straps® are made of tough stretch polyurethane, with a UV-resistant additive to increase their lifespan. Their Super Tough nylon buckle is non-marring, non-conductive, and non-reflective. Few things in life are as reliable as the original Voile Strap®. Over the last 30 years they have become the ultimate alternative to duct tape, nylon straps, and bungee cords. On the job, in the outdoors, and everywhere in between: they are the definitive way to secure, bundle, and repair almost anything on the go.

Stash your ride snacks, repair kit, keys or other ride essentials in this secure and stylish Angry Catfish logo KEG. - Fits in standard bottle cages - Keeps contents secure and dry - Easy screw-down top - 16 oz

- Replacement stabilizers set for Bike Travel Bag Pro

Cargo Straps

The EVOC FRAME PAD protects the bike frame from scratches and other transport damage. - Fits most bike frames - Attachment for handlebar - Velcro straps attachment

Phone Pouch

Raincover Sleeve Commute

Tool Wrap WP

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Long, four-slotted mount allows two, smaller bottles to be mounted in-line - Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts

The B-RAD Dogbone allows for the bottle cage to mounted off center with additional B-RAD accessories, without needing the B-RAD base. Most commonly used for smaller, curved or dual suspension frames where the slotted bases won't fit or are not needed.

The B-RAD pump bag protects your frame pump from water and dirt ensuring it is working when you need it. - Mounts to the B-RAD system or on its own - Dimensions: 12 in x 2.5 in x 2.5 in (30 cm x 6.5 cm x 6.5 cm)

A classic Wald design, this Flashlight Holder can clamp a standard size flashlight to your handlebar or serve as a convenient wall mount.

Replacement hardware, bolts and nuts for Wald baskets. Works with Wald Basket models: 520, 520GB, 535 and 535GB

By using the accessory bolt mounts on a frame or fork, the Wald Standoff kit allows the user to space a basket or rack away from other components that would otherwise be in the way, like disc brake calipers. - 2 Phillips head frame bolts in 1.5-inch (38mm) length - 2 Standoff spacers in 1-inch (25.4mm) length

Common on European utility bikes, a front wheel stabilizer makes loading front racks simpler. It is a spring connecting the fork to the down tube. It adds a subtle self centering action to the front wheel, making loading and unloading of a bike with a basket, or say, our Porteur Rack much easier. The spring also offers some resistance to steering, so it counteracts deflections from hitting potholes and road debris. - Mounts to the back of the fork crown via brake bolt or through bolt - Fork crown mount diameter is made to fit an M6 bolt - common on nutted calipers - Use Sheldon's Fender Nuts to work with recessed brake bolts - Rust resistant and includes all required brackets and hardware - Available for Small (31.8mm and smaller) and Large (38-62mm) sized downtubes

The Gel Fuel Rack / NDM 1 give the user the ability to reach their gels and similar snacks at any time while our on the trails. The "grab-n-pull" aspect of the rack makes it super fast for you to fuel up with new energy. The accessory is compatible with backpacks equipped with the No Dancing Monkey 1.0 and No Dancing Monkey 1.2 harnesses. This attachment is compatible with the following products: - Raw - MTB Hydro - Airborne - Ranger - Patriot - Vertical - Outlander (NOT Compatible with Outlander PRO) With the Gel Fuel Rack / NDM 1 you'll always have instant access to your gels or other small snacks. The "grab-n-pull" make it super fast to fuel up with new energy. The accessory can be attached to the harness of all backpacks equipped with the No Dancing Monkey 1.0 and No Dancing Monkey 1.2 harnesses. The accessory is simply attached to the Velcro shoulder strap. This attachment is compatible with the following products:

Bolt-on eyelet for use with Tubus Lowrider racks and bags requiring bungee hook attachment.

LM-1 Fork Adapter for rigid forks* with a diameter from 20mm up to 32mm. For all Tubus Lowriders except for Duo. *Please Note: Do NOT mount on suspension forks!

LM-BF 35 Fork Adapter, for forks without eyelets. Use with rigid forks* with a diameter from 25mm up to 40mm. For all Tubus lowriders except for Duo. *Please Note: Do NOT mount on suspension forks!

Mudgard Bracket for Rear Carriers

Replacement stays for a variety of Tubus racks. Every roundstay is made out of solid aluminum, and they are available in various lengths and offsets. - 8mm diameter stay - Drilled for M5 bolts

Topeak's Cargo Net works with the Trolley Tote or MTX Rear Basket (sold separately). Make sure your goods stay in place on those bumpy rides home!

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

QuickClick mount for racing type saddles. Works with all Topeak Wedge Bags. - Material : Injected Nylon - Weight: 30g / 1.06 oz

Topeak's front basket handlebar fixer fits standard bikes or eBikes with display units. - Fits up to 1-inch handlebars

Adapter for mounting the Topeak MTX rear basket to any MTX QuickTrack compatible rack.

Fast and easy attachment of Topeak handlebar bags. - Clamp: Fits 25.4/28.6/31.8 mm Handlebars (shims included)

Topeak handlebar bag fixer for eBikes with display units.

For BabySeat II Racks and MTX Tubular Racks (34.5 cm in length for small bike frames). - If you have a small frame bike and cannot install Topeak rack or BabySeat in recommended position (2 or 3 degrees from horizontal), please use the 34.5cm extra long mounting bracket arm for proper installation.

Omni QuickTrack Adapter attaches to a standard rear rack or Racktime* system platform allowing the use of popular Topeak TrunkBags and rear baskets. Adjustable mounting brackets fit rear rack widths from 90mm to 120mm with 10mm to 12mm rack tube dimensions. - Attachments: Rear rack deck - Material: Engineering grade polymer - Max Load: Limited to rack max loading rating - Size: 32 x 9.4 x 6.1cm - Weight: 230g / 8.11oz Compatibility - Fits rear rack without top plate and spring clip, - Rear rack width 90mm - 120mm, - Rack tubes, 10mm to 12mm diameter - Compatible with Topeak MTX / RX TrunkBags and MTX rear baskets *Racktime is a registered trademark of tubus carrier systems GmbH.