Racks

The Widefoot CargoMount™ is the original one-piece aluminum cargo cage. Securely strap down a variety of bottles, smaller bags, and cylindrical objects to your bike frame or fork. Made of sturdy and lightweight aluminum, and available in anodized Black, Silver, Purple, Orange, and Blue finishes. Weighing just 66g, it’s among the lightest cargo cages on the market. Attach your CargoMount to three-bolt mounting systems using our unique 7-slot configuration, which allows fine tuning at multiple positions on frames and forks. For more information on installation and use, see Description below, and Voile Straps page. Installation and Use: A) Install CargoMount by using three bolts to secure to frame or fork mounting bosses. Use 2 bolts and non-bolt mounting applications at your own risk. B) Thread two straps through, then around the outside of the CargoMount. Wrap straps around your cargo, and securely fasten according to your straps instructions so that movement of cargo is eliminated. Tuck away any loose ends, and keep away from moving parts. Use of two straps is always recommended. Note: Mounting hardware is not included. Installation by a professional bicycle mechanic is recommended. Consult with your bicycle manufacturer if you have questions about compatibility with your bike frame or fork. Use of two straps is recommended. Always ensure your CargoMount, straps, and cargo are securely fastened and not interfering with moving parts before riding.

The most tried and tested all-round carrier updated for today’s challenges: 3D feet with perfect force absorption and integrated screw attachment. Comfortable mounting parts for mounting the stays to the frame. Including protection of tail light. If required, a spring clamp can be clicked onto the carrier. Armed for the next tour. - Material: 25CrMo4 - Weight: 780 g | 27.5 oz (28'') - Loading Capacity: 26 kg | 57.3 lbs (tested with 40 kg | 88 lbs*) - 10 mm | 0.4 in

If your fork has inside and outside eyelets, then the DUO is your right choice. Just as the TARA, DUO tolerates extreme loads and almost all panniers. It also ­features a longitudinal hole for optimal fit and increased flexibility. Not suitable for mounting on spring or carbon forks without eyelets. The fork must be approved by the manufacturer, or by the bicycle manufacturer for mounting a carrier. There must be no crimping. - Material: 25CrMo4 - Size: 26" | 28" - Weight: 560 g | 19.8 oz - Loading Capacity: 15 kg | 33.1 lbs - Diameter: 14 / 10 mm | 0.6 / 0.4 in

The Fly is a lightweight carrier designed to carry panniers on a fast road or cross bike. Created with narrower tires in mind, the V-shaped Fly Evo allows for a low profile while protecting the rear wheel. It also features 3D-feet for simpler mounting. A single adjustable strut mounts the Fly to the bake bridge, making it a minimalist's dream. - Weight: 330 grams/11 ounces - Capacity: 18kg/39 pounds - Wheel size: 26-inch/700c

Made for traveling: The top rail is designed extremely narrow, still offering enough space to fit a tent, mattress and sleeping bag. Your panniers are mounted one level down. This lowers the center of gravity and improves the riding stability of your bike. In combination with TARA our LOGO models make the ultimate dream team for long-distance traveling. The LOGO also fits on particularly short frames. - Material: 25CrMo4 - Size: 26'' | 28' - Weight: 800g | 28.2 oz (26" | 28") - Loading Capacity: 26 kg | 57.3 lbs - Diameter: 10mm | 0.4 in

Made for traveling: The top rail is designed extremely narrow, still offering enough space to fit a tent, mattress and sleeping bag. Your panniers are mounted one level down. This lowers the center of gravity and improves the riding stability of your bike. In combination with TARA our LOGO models make the ultimate dream team for long-distance traveling. The LOGO also fits on particularly short frames. - Material: 25CrMo4 - Size: 29'' - Weight: 800g | 28.2 oz (26" | 28") - Loading Capacity: 26 kg | 57.3 lbs - Diameter: 10mm | 0.4 in

A low-profile rear carrier with a minimalist approach, the Vega Evo is made for everyday commuting or as a lightweight weekend trip carrier. It utilizes double struts for attachment to the seat stays. The Vega Evo features 3D-feet and stay mounting for the 2012 models on. There are four points that can be attached to your frame (even with small frames). - Weight: 510g/18 ounces - Load capacity: 25kg/55 pounds - Wheel sizes: 26-inch/700c

If you like to ride useful bikes, racks make a lot of sense. Our 24-Pack Rack ups the useable cargo space from our 8-Pack Rack, providing more real estate for more stuff: more beer, more food, more random bits from the hardware store, more whatever. It’s manufactured from Chromoly tubing and uses the same stainless-steel hardware (handily housed in a reusable Surly Tool Bag) supplied with our other rack. It offers the same height adjustability too, so you can keep your cargo close to the ground and stable. It has plenty of braze-ons so you can customize how you secure your cargo…or just light your bike up like the space station. The 24-Pack Rack attaches to most forks that feature mid-blade and crown eyelets. It gives you a stable, rigid assembly upon which you might place your burden. No one likes a sweaty back and a sore ass, so take your stuff out of that messenger bag and put it on the front of your bike. Rack Specifications: Color: Black or silver Weight Limit: 13.6kg (30lb) Finish: ED Coating + Powdercoat Rack Material: Tubular 4130 Chromoly Platform Dimensions: 270mm x 400mm

Most of you don’t need the cargo capacity to land a helicopter on your rack. Sometimes, all you want to do is grab a sixer from the beer store on the way home or pick up a nice bouquet of flowers. For whatever the situation dictates, we offer the 8-Pack Rack. The 8-Pack Rack is a solid pedestal upon which you may rest a handlebar bag, grocery bag, minaudière, satchel…or whatever you use to carry your bowling ball around. The 8-Pack Rack attaches to most forks with mid-blade and crown eyelets. It uses stainless steel hardware (handily housed in a reusable Surly Tool Bag), and has the characteristic durability, versatility, and repairability all Surly products are known for. The 8-Pack Rack has lots of barrel braze-ons, so you can customize your cargo tie-downs…or just bolt on as many lights as you can. Rack Specifications: Color: Black or silver Weight Limit: 13.6kg (30lb) Finish: ED Coating + Powdercoat Rack Material: Tubular 4130 Chromoly Platform Dimensions: 270mm x 160mm

Surly Racks are well-thought-out, durable, expedition-worthy racks that work with most panniers. While their racks aren't limited solely to heavy duty touring, that is what they were designed for. When you're out on the road, the best option is to never ever have anything ever go wrong ever. Right? That's never a guarantee though; so having something that you can repair if it does break can be pretty clutch. Thus, the main bodies of Surly's front and rear racks are made from tubular CroMoly steel with stainless hardware. This means you can probably find someone out there that can torch it back into one piece in the rare instance things go south. The Front Rack is height adjustable and provides either a low or high pannier mounting position, which can be handy depending on terrain. When the ground gets rough, keep your gear high and dry. When the path is smooth and easy, you can load things low and keep everything balanced and stable, with the platform above the wheel providing yet more space for more stuff. It's worth mentioning they've redesigned the Front Rack hardware to be simpler to attach and more compatible with things like disc calipers and fenders. Surly also made attachment plates specifically for their Uni-Crown forks for yet more fork compatibility. This simpler design has fewer moving parts and costs less to manufacture; ergo, costs less for you to purchase. Surly's front rack WILL work with disc brakes on the Troll, Ogre, and Disc Trucker frames. It may take a bit of work to get clearance around the front caliper since the many different calipers out there are many different shapes. The new attachment plates will limit any DIY ingenuity you might need, but if you need to throw a washer or three behind the lower left bolt where the plate attaches to the fork dropout, that's not a big deal. As part of Surly's ongoing effort to make this planet last a little longer, they recently started shipping their racks with a small, reusable Surly Tool Bag that houses the rack struts and hardware. This switch helps eliminate the use of some polybags, thereby minimizing excess waste. Plus, you get a free tool bag out of the deal. Surly Front Rack will haul up to 32kg (70 lb) of well-secured, well-balanced gear over roadways and maintained off-road trails. Front Rack specifications: - Tubing diameter: 10mm - Platform dimensions: 230 x 170mm - Weight: 1382g

Surly's burly line of tubular chromoly steel racks have been used on expeditions all over this planet for years.This Surly Rear Disc Rack is made of tubular chromoly steel and is specifically designed to fit frames with seatstay-mounted disc brakes like the Straggler (650B and 700c), Krampus, and Karate Monkey. - Tubular chromoly rack, stainless-steel hardware - Height-adjustable to accommodate 26-29" wheels - Hardware housed in reusable Surly Tool Bag

From everyday use to light touring stints, the 'Half Moon' rack adds a dimension of capacity, functionality and style to your bicycle's front end. The front rack is often an underestimated accessory for the bicycle, but once it's attached, it lends itself to easy and convenient use in so many instances, that it becomes difficult to imagine being without it. Adding a pannier bag to the Half Moon- below it's top platform opens up an added realm of carrying capacity. The rack can be attached using fender mounting eyelets or cantilever brake pedestals in conjunction with a crown mounted "diving board". The legs of the rack are adjustable in height with SimWorks' original 'DenDen' bolt mechanism, allowing you to set the optimum angle and positioning of the rack for your bike. The updated version for Spring '22 features expanded tire capacity, slightly longer legs, and a brazed bar across the bottom of the rack to help secure a pannier clip After depositing your luggage on the half moon rack, whisper as usual ? If you feel the attraction of the half moon, you may be able to go farther ? Made by Nitto in Japan Specifications: - Material : 9mm CrMo Steel Tube - Weight : avg. 780g -Max Load : 12kg - Leg length : 340mm ~ 360mm / Geometry - Color : Chrome Plated & Black Notes: - Insert the leg adjuster DenDen bolt at least 15 mm. - Please refer to maximum load capacity. - Use with a basket etc. qualifies as modification and is not covered by the warranty. - Do not use with extended loading capacity. - In some instances, Half Moon can even be mounted on the rear end of a bike- given appropriate frame geometry and mounting points.

In case you can’t use a standard dove stay, this longer version will help you out quickly. Height: 26~29mm (from a surface of fender to the center of a bolt)

Our new rear bag support is a highly adaptable compact carrier produced by our partners at Nitto. Able to be mounted on a wide range of cycles, the Burrito rack is a suitable way to carry a compact load, whether as a support for a bag attached to your saddle, or as a standalone rack that a small bag, stuff sac, or sleep roll could be attached to. The rack's decking is constructed of tubular chromoly. The adjustable struts can be eyelet mounted or you can use the included band clamps to secure the rack to your bike's seat stays. A seatpost clamp provides the third necessary attachment point. Nitto recommends using the clamp with seatposts between 26.8mm and 27.2mm. This range could potentially be expanded to larger posts with longer hardware. Studs on the underside of the rack could serve as an anchor point for a strap or lashing. Fit, finish, and hardware are all classic Nitto top shelf specification. * Minimum clearance between top of rear tire and seatpost clamp position: 12cm Specifications: - Chromoly Construction - Trim to length aluminum struts - Stainless Hardware - Load Capacity: 10kg - Weight: 410g - Production: Nitto Japan - Finish option: Chrome / Black Plating

Simple form and function for your daily use and light touring. This simple front rack is designed to have more cyclists use our popular Potluck style of rack, and it features a lunch box size compact table as well as Potluck Rack has. Since there is long size connection rod and clamp in order to correspond to any front folk systems, you can still attach this rack without eyelets. It has a perfect form to match with our On The Road Rack as well. Once you have your Obento lunch box tied on this rack, let’s go to that hillock! - Material: 9mm CrMo Steel Tube / Main Frame - Weight: ave.635g - Max Load: 5kg - Platform Dimension: 210mm x 210mm - Accessories: (Connection Rod 420mm x 2, Connection Rod 350mm x 2, Clip Band 22mm x 2) *This item is designed for a front bag supporter, which means it supports a bottom part of a bag hanging from a handle bar. Please be careful for the withstanding load when you put something by itself on the rack.

-This new 'Off The Road' rack is, so-to-speak, a wider and heavier-duty version of the 'On The Road' rack. It was developed for off-roaders who wish to load more and travel further. Fit is tailored through our clever 'Denden' bolt height adjustment for the rack 'limbs' and Daruma-secured connection rods. Fit and finish is sublimely Nitto- as always. -Your search has ended for a rear carrier to transport you further. Welded with the 'Off The Road' mentality of a sweeping elegant curve- it is a functional and ample solution for a cosmic navigation machine that seamlessly roams through our increasingly entropic world. -Material : 12mm CrMo Steel Tube Weight : ave.1.15kg Max Load : 16kg Required Bolt Inserts : 15mm Color : Chrome Plated & Black * 15mm minimum Denden insertion depth * Please follow load capacity for safe use

Good thing about a bicycle is that you can ride for shopping and also touring whenever you feel like. We wanted to make a carrier that will expand a capacity of your ride. Chromium molybdenum steel tube which is the essential requisites of touring carrier is light, durable, and able to be fixed by welding when something happens on your trip. Craftsmen at NITTO created exactly what we asked for, “A carrier with less tubes”, and moreover they completed this durable rear rack with less welding parts as well. Chrome plating will provide you a better look as usual and give you an easier solution for re-painting. After pretreatment of nickel plating for black carrier, electrodeposition coating is done, so that it is considered that it won’t be corroded easier even though the black part comes off. Specifications: - Material: 10mm CrMo Steel Tube - Weight: ave.778g - Max Loading: 5kg - Required Bolt Inserts: 15mm

The Alternator Rack 190 is the rear rack solution for all Salsa 190mm-spaced Alternator dropout equipped frames. Load up your panniers, get off the beaten track, and start exploring! - NOTE: Deck requires a minimum of 320mm clearance from seatstay mounting points - NOTE: Salsa Rack-Lock needed for frames without upper seatstay mounts - Tubular AL-6061-T6 construction - 135 x 325mm cupped deck - Extra-long struts for improved range of fit. Straight and shaped (kinked) struts included - Large pannier hook stops - Black powdercoat finish - 15kg maximum recommended load - Mounting kit included - 765g

Set out on an adventure with Salsa's Alternator Rear Rack. Built for 135mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.

Set out on an adventure with Salsa's Alternator Rack. Built for 170mm-spaced dropouts, this rack is constructed of sturdy, light 6061 aluminum and finished with a black powder coat. The Alternator features large pannier hook stops, extra long struts for an impressive fit range and it includes a mounting kit.

The Salsa EXP Series Anything Cage HD is a unique cargo mounting system that allows you to carry lightweight gear or large bottles on forks and down tubes that have Three-Pack mounts. - Versatile system designed for the Salsa Anything Cage Bag with EXP Series Rubber Straps (included) or nylon EXP Series Anything Cradle Straps - Constructed with glass-filled nylon for strength and durability - Holds gear low on fork blades or down tubes with Three-Pack mounts - Includes Anything Cage HD with hardware, Anything Cage Bag, and two 20" Salsa EXP Rubber Straps - Maximum load: 6.6 lb (3kg)

Load up and go! Salsa's Wanderlust HD Rear Rack is built from chromoly steel for real-world strength. A large deck teams up with multiple cross bars for securing panniers and other gear. To get you going, a mounting kit is included, and to help you stay visible, there's also a taillight mounting bracket.

Salsa's Wanderlust Rear Rack carries essentials for touring and bikepacking over the rear wheel of your bike. It's constructed from aluminum to keep the weight down and features multiple cross bars for panniers, a taillight mounting bracket, and a long, cupped deck to load up your gear. For easy installation, the Wanderlust features long, very adjustable struts.

The Manivelle Front Rack is the result of our collaboration with Caddie, a historical French manufacturer based in Alsace, which is 15km away from our workshop. Their know-how and experience allow us to propose a high quality and durable commuter front rack With its adjustable mounting kit, our commuter rack fits on most of city and touring bikes, even those without mounting eyelets on the fork. Do you have a question about the product? We invite you to visit our F.A.Q. https://www.cyclesmanivelle.com/f-a-q or contact us at contact@cyclesmanivelle if you can’t find your answer there! Specifications: - Dimensions : 27x38cm - Max load : 10kg - Weight : 940g - Compatible with wheels from 26’’ to 29’’. Need a drilled fork - Supplied with screws, adjustable mounting kit and light support - Ultra strong Zinc-plated steel

The EXPÉ is one of the biggest fork cage available on the market, and also one of the most off-road ready! Thanks to its adjustable mounting kit, they fits most of forks, including those touring forks with one central eyelet and one bottom mudguard eyelet. Do you have a question about the product? We invite you to visit our F.A.Q. https://www.cyclesmanivelle.com/f-a-q or contact us at contact@cyclesmanivelle if you can’t find your answer there! Specifications: - Dimensions 31x11x9.5cm - Weight : 265 grammes l’unité - Loading capacity : 4kg, 12L - Supplied with screws and straps - Available with or without Guy Cotten drybags (7L, made in France) - Inox 304L tubes - Aluminium 6061 - Screws in inox

The Unirack, handcrafted in our workshop, is a seatpost rack designed for offroad riding. Its design is particularly rigid, thanks to its triangulation around two fixing points. Its design pushes the rear bag farther from the saddle than on the supports already available on the market, giving the rider much more freedom of movement. Thanks to its 3D printed mounting kit, the Unirack adapts to all seatposts in D27.2 and 31.6 and will therefore equip both a gravel and a suspended mountain bike. We did not want to make the Unirack compatible with telescopic seatposts, knowing that in any case the use of a telescopic seatpost would not be suggested with a remote load. Originally designed around the SHAZAM saddle bag from our friends from Wizard Works, the Unirack is compatible with most saddle bags of this type (Zeitgest and Catalyst Pack from Swift Industries, Werewolf from Helmut Equipement, etc). A product which catches interest of TheRadavistand Bikepacking.com ! Do you have a question about the product? We invite you to visit our F.A.Q. https://www.cyclesmanivelle.com/f-a-q or contact us at contact@cyclesmanivelle if you can’t find your answer there!

When it's time to ditch the backpack, the back soreness and the back sweat, look no further than the MSW Pork Chop Light Duty rack. It's got plenty of capacity for those key items on your journey. - W-bend stays keep pannier hooks in place - Fits most bikes with 26" - 700c wheels - Designed for bikes without disc brakes (for disc brake bikes, see RCR-100D) - Holds up to 40 lbs. of cargo - Top platform dimensions are 310mm x 112mm

Boost Sideloader Rack - Fits all Boost 2016-22.

Axiom's Journey Adjustable 2429 Rack is made of light, rugged aluminum with vertically adjustable stays meaning it mounts on a wide range of rear wheel sizes. It handles even large, heavy panniers (sold separately) with additional looped struts that keep your panniers steady. There also is a platform on top, which adds strength and doubles as a mini fender.

Wald bicycle racks offer a simple rear rack design for easy use. Lightweight, yet sturdy construction with simple mounting points located at eyelets near the rear axle and the brake mount. The 215 works perfectly with Wald's innovative 582 rear folding basket. - Simple design for easy use - Lightweight, yet sturdy - Steel rack w/adjustable brake bolt mount - Loading surface = 13" x 5" - Lightweight at just over 2 pounds