Tools/Maintenance

The Feedback Sports Pro Mechanic HD Bike Repair Stand is constructed with oversized, anodized aluminum tubes, a wide and stable base, stronger jaws, and faster closure. It features a working load range of 10-70lbs (max load 100lbs/45kg) and tube diameters to 2.6 inches (6.6 cm). Yet it’s lightweight and portable at 18 pounds (8 kg) and 8” x 43” (21 cm x 115 cm) when folded for travel. - Oversized, anodized 6061 T6 aluminum construction is ultralight, corrosion-resistant and incredibly durable - Oversized knob to fix the position of a 360-degree rotating clamp, providing easy access to all parts of your bicycle - Strong clutch design holds bike at any angle for repairs: 45% greater grip than Pro Elite - New, ratcheting and rotating crank for jaw closure is faster and one-hand operable: closes 60% faster than Pro Elite - Clamp opening up to 2.6" (6.6cm) accommodates the largest diameter frame tubes - 3-year warranty.

Hirobel is a specially designed clamp for bicycle repair stands that makes it easier to work on your bike. It better distributes stresses and loads through the bicycle frame, offering superior stability while eliminating possible crushing or damage to thin-walled and shaped tubing. The pressure clamps used on contemporary workstands were developed for round steel tubing more than 40 years ago, predating carbon fiber, aluminum, aerodynamic and oversized tube shapes, integrated seat masts, dropper posts, and suspension systems. These legacy designs assume your bicycle tubing to be both round and straight, and when it is not, the clamp can impart very high point loads at the clamp edges causing finish damage, internal carbon layup damage, or outright crushing of tubes on the lightest designs. With Hirobel, specially shaped, paint-friendly cones and bindings cradle the frame at the tube intersections, where wall thicknesses are higher and forces can be distributed over much larger surface areas. Adjustable and adaptable for any possible frame design, the Hirobel also allows the repair stand clamp to be located closer to the bicycle center of gravity. This improves stability and eliminates bouncing of the bike during heavier work while also locating the drivetrain consistently higher for the mechanic, improving visibility while reducing back strain.

Representing the next evolution of our flagship repair stand, the new Pro Mechanic builds on the longstanding reputation of its predecessor, the Pro Elite. With upgraded clamp jaws, clutch components, and mast hardware, the Pro Mechanic is more durable, more stable, easier to use, and even more reliable. The updated front spinner knob on our patented Speed Ratchet clamp head makes operation even faster, and the revised rotating clutch internals hold bikes more securely. This is the premier bike repair stand for mechanics who value class-leading lightweight, compact folded size, and rugged durability combined with unmatched stability, adjustability, and portability. Features: - Patented, ratcheting action seatpost clamp features a spinner knob for fast, one-handed operation and a push-button release. - Updated with more holding force, the 360-degree rotating clamp design provides easy access to any part of your bicycle. - Frame clamp positions from 42"-67" (107-170cm) in height. - Secure clamp with micro-adjustment secures and protects expensive components and beautifully painted frames. - New, rubber clamp jaw covers are tool-free and replaceable. - Clamp opening up to 2.6" (6.6cm) accommodates the largest diameter frame tubes. - Anodized 6061 T6 aluminum construction is ultralight, corrosion resistant, and incredibly durable. - Sturdy metal fittings and quick releases for a lifetime of duty in the field or at home. - Stiff tripod base and rubber-coated end caps create ultimate stability even on uneven surfaces. - Working load range of 10-35lbs (4.5-16kg) accommodates service on road, cyclocross, and XC mountain bikes. Maximum capacity 75lbs (34kg). - Portable and compact construction creates a remarkably small folded footprint of 5" x 8" x 45" (13 x 20 x 115cm). - Available travel bag is water-resistant, durable, and padded to protect your stand and your other equipment. - Quick-release fittings make setup and storage fast and convenient. - At 12.6 lbs (5.7kg), traveling with this repair stand is easy. - A full ensemble of repair parts is available for long-term serviceability. - 3-Year Warranty.

The BKD-1 Hydraulic Brake Bleed Kit will bleed most models of DOT-fluid-based hydraulic brakes. Hydraulic systems need bleeding to remove any air bubbles and to inject new, clean fluid. - Designed and built for home use and the rigors of daily commercial use - Includes two syringes, hoses with shutoff clips, multi-size bleed blocks and a unique attachable syringe mount - Housed in a rugged reusable case - Machined stainless steel and 7075 aluminum fittings to service SRAM, Hayes, Formula, Hope and other brands of DOT-fluid-based hydraulic brake systems - Replacement parts available - Brake fluid not included

High-quality Kraftform Plus screwdriver. The ballpoint drive profile means that it is possible to swivel the tool axis away from the screwdriving axis, thus enabling "round the corner" screwdriving. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace. - Kraftform Plus: hard gripping zones for high working speeds, while soft zones ensure high torque transfer - Hexagonal ball point screwdriver - Multi-component Kraftform handle for fast and ergonomic screwdriving - "Take-it-easy" tool finder: color coding according to profile and size - Hexagonal blade and ballpoint for secure working even in difficult installation situations - The Wera Black Point tip offers an exact fit and optimum corrosion protection

Lefty Hub Adaptor for The DT Swiss Truing Stand.

The basics of what you need to perform maintenance on TRP and Tektro hydraulic disc brakes. Includes the following: - 1 Syringe - 1 Plastic tubing for syringe/caliper - 1 Plastic tubing for lever/overflow - 1 M5 Silver bleed fitting - 2 M6 Silver bleed fittings - 1 M7 Black bleed fitting

The new B-gap adjustment tool is simple and easy to use, allowing for a quick set up experience. Small enough to be able to pack in your ride bag or stash in your toolbox for repeated use, it is also industrially recyclable if you find you no longer have use for it. This is the most precise tool for setting up and adjusting your drivetrain.

A sturdy bicycle cleaning brush with a unique angled and contoured shape – perfect for cleaning cassettes and freewheels as well as tires. With a strong ergonomic handle and stiff nylon bristles, the GSC-4 scrubs away the toughest muck and mess.

Low viscosity mineral oil for use with Campagnolo hydraulic brake systems. - Does not absorb water so regular bleeding is not necessary - Non-toxic and will not irritate skin - Will not damage frame finishes

Portable bicycle pressure washer with three lances, custom waterproof bag, cleaning solution, Bike Protect, Drivetrain Cleaner and C3 Ceramic Lube. Water supply is required. - Includes 3 lances; 1 for bicycles, 1 for motorcycles (higher- pressure), 1 bespoke (adjustable higher presser) for heavy grime, custom waterproof dry bag carry case - Also includes snow foam lance for Muc-Off Nano Tech Bike Cleaner creating a thick snow foam for deep cleaning - Weight: 15lbs - Intended for use with cold water only

The MTB-5 packs 16 functions into one slim, tough folding multi-tool, making it the ideal companion for any trailside adjustment or emergency fix. Features a full set of hex wrenches and screwdrivers, a T25 Torx-compatible driver, and five specialty tools to aid in common on-the-ride repairs. Includes the following: - 2, 2.5, 3, 4, 5, 6 & 8 mm hex wrenches - T25 Torx-compatible driver - Philips #2 cross tip & flat head screwdrivers - Chain tool (5 to 12 speed compatible)* - Spoke wrenches (equivalent to SW-0 and SW-2) - Presta valve core removal tool - Disc brake rotor truing tool - Disc brake pad spreader *The MTB-5 will not peen Campagnolo 11, 12 or 13 speed chain rivets - Dimensions: 3.1" x 1.8" x 0.8" (79 x 45 x 20 mm) - Weight: 6.9 oz. (195 g) - Replaceable chain tool pin (Part #985-1)

The included 9 function Multi Tool contains your most used tools and is designed to live inside your stem/steerer tube. Never get stuck without a Multi Tool on a ride ever again. - 2, 2.5, 3, 4, 5, 6, 8mm - T25 Torx - Flat Head Screwdriver - A stripped down version of the EDC tool containing a 9 function multi-tool neatly stored in your steerer tube - Very easy to install without removing your star nut or threading your steerer tube

Each kit contains: - Nano Tech Bike Cleaner: 1L, MO-94: 400ml, Dry Weather Lube: 50ml, Expanding Microcell Sponge

The DTD-8 is a precision Torx®-compatible driver machined to exact standards to ensure a perfect fit on compatible component fasteners. The stubby size of the DTD-8 provides extra control during removal and installation of delicate hydraulic brake fittings. Featuring an ergonomic CNC-machined hard-anodized 6061 aluminum handle and a precision T8 tip. - T8 Torx®-compatible wrench - Not intended for high-torque applications - Total length: 3.75" (95mm) - Shaft length: 1.7" (43mm) - Weight: 2.22 oz. (63g)

- Bottom bracket and bearing installation kit - (1) 1/2" rod, (2) threaded handles - (1) 2237 OPEN BORE, (2) 2437 OPEN BORE, (2) 29mm OPEN BORE, (2) 6806 OPEN BORE, (1) FRAME DRIFT

- Bearing extractor set for medium bearings - (1) 6002, (1) 6003, (1) 6804, (1)6805

- Multi-function chain wear checker and chain holder. - Constructed from precision machined stainless steel. - Integrated valve core tool and bottle opener. - Included steel ring for hanging storage. - Works with 5 to 12-speed chains.

A puncture in your tubeless tire doesn't have to be a death sentence for your ride. This handy carry-along tool repairs small punctures and cuts in tubeless bicycle tires without removing the tire from the rim, getting you back on the trail in no time. The TPT-1 easily plugs the hole by inserting one of the 5 included vulcanized rubber plugs into the puncture. This shrinks the puncture down to a manageable size, allowing the tubeless sealant to do its job and reestablish a seal. The unique sliding plug retainer holds the plug in place and prevents it from being pulled back out as the tool is removed. Everything is stored in a compact package that fits easily in a saddlebag or backpack pocket. - Includes 5 vulcanized rubber plugs (refills available — part #2370K) - Dimensions: 89 x 27 x 40 mm (3.5" x 1.1" x 1.6") - Weight: 79 grams (2.8 oz.) with plugs NOTE: Intended for tubeless bicycle tires using sealant only. Not compatible with inner tube systems.

200 Hour/1 Year Service Kit (Includes Dust Seals, Foam Rings, O-Ring Seals, Charger 2 RLC Sealhead) - Sid RLC A1+ (2017-2019)/Ultimate B4 (2020)

Zyklop Mini 2 is for the direct take-up of special Wera Zyklop sockets. Offers rapid screwdriving even in confined working spaces, the Zyklop Mini 2 is the preferred choice whenever fastening with a power tool or conventional hand tool is impossible due to a lack of space. - Direct attachment of special Zyklop sockets - Small return angle of 6 degrees for precise working - Simple left/right switchover - Ideal for confined working situations

The Wera 2go tool container is the ideal solution for individual and convenient tool transport thanks to its hook-and-loop fastener system and its compact size. The inner and outer hook-and-loop fastener zones ensure a maximum in terms of space utilization. This means that an incredible number of tools can fit in container. Wera 2go 2 ensures a low weight since only the tools really needed for the job are taken along. The robust and dimensionally stable material protects the tools carried against damage and moisture and enhances the service life of the tool container. The padded and width-adjustable shoulder strap and the snug fit of the container on the body mean that the container is easy and convenient to carry, hands-free. It comes with an individually adjustable hook-and-loop fastener partition for screwdrivers and other tools. - Wera 2go tool container with inner and outer hook-and-loop fastener zones - Individually configurable for greater mobility - Ideal also for the docking of Wera textile boxes and pouches equipped with hook-and-loop fastener zones - Easily packed and cleared out - Hands-free transport

High-quality, metric, combination ratchet wrench by Wera. The new generation of combination ratchet wrenches. Suitable for hexagon socket screws, bolts or nuts. Comes with holding function, thanks to the metal plate in the jaw, which reduces the risk of dropping nuts and bolts. The replaceable metal plate in the jaw secures nuts and bolts with its extra-hard teeth and reduces the danger of slipping. The integrated limit stop prevents any slipping around the bolt head and allows higher torque to be applied. - Practical holding function due to metal plate in the jaw - Limit stop prevents any slipping - The double-hex geometry reduces the risk of slipping - Return angle of only 30 degrees - "Take-it-easy" tool finder: color coding by size

T-handle screwdriver: The ideal handle shape to allow high torque transmission in difficult tightening and loosening situations. The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. There is a special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head. - T-handle screwdriver for the transmission of high tightening and loosening moments - Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for high power transmission and fatigue-free working - "Take-it-easy" tool finder: color coding according to profile and size - With additional short arm for the transmission of extremely high torques due to the leverage of the long arm - With holding function (HF) securely holds the hexagon socket screw on the tool

3/8" drive Zyklop bit sockets. - 8-piece bit socket set on a robust textile belt, 3/8 - Bit-sockets with all the advantages of the Wera bit technology - Bit-sockets with holding function for screws/bolts - Smooth Twist to Unlock mechanism for a secure fit and simple removal of the sockets - Suitable for attachment to a wall, shelf, tool trolley and to the Wera 2go System - 1x Belt B 2 Zyklop In-Hex-Plus bit socket set with holding function, 3/8" drive, 8 pieces - 8x 8740 B HF Zyklop bit socket with holding function, 3/8" drive - 3.0x35.0, 4.0x35.0, 5.0x35.0, 6.0x35.0, 7.0x38.5, 8.0x38.5, 9.0x38.5, 10.0x38.5 - 1x Socket rail B (textile belt), 8 location, unloaded, 45 x 275 mm - 1x Hook-and-Loop Fastener Strips 30, 200 x 30 mm

L-keys made from circular material with plastic sleeve for use on bicycles. The plastic sleeve makes working comfortable even at low temperatures and is easy on the fingers. All L-keys are easily accessible due to their color coding and size markings. For hexagonal socket screws and Torx screws. In a robust and lightweight folding pouch. - L-key set for hexagonal socket screws and Torx screws - L-keys with Hex-Plus advantage for a longer screw life - L-keys are easy to find thanks to their wear-resistant size markings - In a practical, lightweight folding pouch for easy carrying

Incredibly compact set arrangement with many tools in a minimum of space. A completely new ratchet set feeling thanks to the unique textile boxes that are very robust and durable. They can be positioned upright for tidy storage on the workshop shelf. Additional surface protection due to textile outer material. Low weight and volume for simpler mobility. - Freely pivoting ratchet head with 5 predefined locking positions - Fine toothing with 72 teeth - Small return angle of only 5 degrees - Free-turning sleeve for high working speeds - Take-it-easy tool finder: color coding by size

3/8" drive Zyklop bit sockets. - 9-piece socket set on a robust textile belt, 3/8 - For manual and power tool operations (non-impact) - Smooth Twist to Unlock mechanism for a secure fit and simple removal of the sockets - "Take-it-easy" tool finder: color coding by size - Suitable for attachment to a wall, shelf, tool trolley and to the Wera 2go System - 1x Belt B 4 Zyklop socket set, 3/8" drive, 9 pieces - 9x 8790 HMB Zyklop 3/8" socket: 8.0x29.0, 10.0x29.0, 12.0x29.0, 13.0x29.0, 15.0x29.0, 16.0x30.0, 17.0x30.0, 18.0x30.0, 19.0x30.0 - 1x Socket rail B (textile belt), 9 location, unloaded, 45 x 310 mm - 1x Hook and Loop Fastener Strips 30, 200 x 30 mm

Wera ZyklopT-handle for higher torque transfer. For 3/8" square sockets with ball lock. Adjustable drive for more flexible usage. - 3/8" Zyklop T-handle with adjustable drive - For 3/8" square sockets with ball lock - High-quality chrome vanadium steel, matte chrome-plated - For higher torque transfer

The Mini P20 is a 20-function, pro-quality, precision mini-tool with a sleek forged alloy body. Integrated chain tool with built-in master link tool for removing master link type chains folds away for a streamlined profile. Perfect for any road or trailside repair. - Body Material: Forged aluminum - Tool Material: Chrome vanadium steel - Size: 7.4 x 2.9 x 1.8cm / 2.9" x 1.1" x 0.7" - Weight: 131g / 4.62oz - Additional Features: Knife blade lock, extendable for leverage, and secondary chain link fence - Includes neoprene bag Tools: - S2 / 3 / 4 / 5 / 6mm Allen wrenches - 8mm hex socket - T15 / T25 Torx wrenches - 14G / 15G / Mavic M7 / Shimano 4.5mm spoke wrenches - CrMo steel chain tool, CrMo master link tool - #2 Phillips screwdriver - Serrated knife / saw

- The world's fastest race lube… period - Ultra-low coefficient of friction - Class-leading low wear on chain components - Provides the ultimate performance in both wet and damp or dry and dusty conditions - Continues to improve with chain run-in due to continued surface improvement at a molecular level - Non-wax based lubricant - Outperforms competitor chain lubes and waxes - Biodegradable and sustainable - Proprietary additives for self-lubricating capabilities - Synthetic polymers for long-distance performance - Works in temperatures down to -20°C - Low noise formulation - Pipette system for easy application

- State-of-the-art, professional-strength biodegradable cleaner - Rapidly breaks down the stickiest of oils, grease and the nastiest grime on all chains - A unique combination of active ingredients rips through dirt and oil without damaging the chain - Safe to use in Ultrasonic Tanks up to 40°C - Quickly, easily and gently removes oil, dirt and grime - Formulated to be ultra-safe - Water-based and readily biodegradable* formula - Solvent-free & non-caustic - Easily washes off with water * Only contents are biodegradable

- New high-pressure turbo spray - Easily cuts through tough grease in seconds - No rinse, heavy duty formula - Can be used on chains, gears and individual components - Works on tough waterproof grease and chain wax

The Muc-Off Bike Care Duo Kit covers Stage 1 and 2 in the Muc-Off cleaning system. Our award winning Nano Tech Bike Cleaner cuts through dirt, mud and grime quickly and safely without the need for acids or dangerous chemicals. This unique formula is also 100% biodegradable so it's safe for your bike and the planet. After you've given your bike a good clean with the Nano Tech Bike Cleaner, it's time to add some protection. Muc-Off Bike Spray is the ultimate post-wash water dispersant. Not only does Bike Spray rid your bike's frame and components of moisture, but it also leaves a non-sticky layer of protective PTFE to prevent rust and corrosion. It also makes future cleaning and maintenance a breeze. - Contains Nano Tech Bike Cleaner, Premium Formula PTFE Bike Spray and cleaning sponge

Smartphones are proven to be 7 times dirtier than a toilet seat! That's where the Muc-Off Antimicrobial Screen & Device Cleaning Kit comes in, to help keep bad bacteria away. Each kit has a premium antimicrobial cloth that has been specifically designed to clean delicate finishes. The pack also includes a 32ml Device Cleaner spray bottle containing an advanced pH balanced, eco-friendly cleaning formula that gives a streak-free finish. - Formulated using deionized water and is pH neutral - Antimicrobial treatment includes silver ions to kill 99.9% of bacteria (fights bacteria, mold and fungi - Anti-odor cloth that stays fresh - Fast acting, eliminates 99.9% of bacteria in less than an hour - Cloth is Machine-washable and effective through as many as 100 washes

Muc-Off Device Cleaner spray bottle contains an advanced pH balanced, eco-friendly cleaning formula that gives a streak-free finish for phones, tablets and laptops. It’s never been easier to keep your devices bacteria-free with the Muc-Off treatment. - Gives devices a streak-free finish - Formulated using deionized water and is pH neutral - Store in a cool dry place

This one's for the speed freaks. Say hello to the world's fastest race lube – Ludicrous AF! In development for over three years and perfected throughout the 2020 Grand Tour season, with multiple podiums and an overall win at the Giro d'Italia. Stripped back to the bare essentials–no coloring, no fragrance, no additional corrosion inhibitor, just a unique blend of environmentally friendly raw ingredients designed to minimize chain friction and wear, while maximizing performance in all conditions. - Ultra-low coefficient of friction - Class-leading low wear on chain components - Provides the ultimate performance in both wet and damp or dry and dusty conditions - Continues to improve with chain run-in due to continued surface improvement at a molecular level - Petroleum-free formula, environmentally friendly ingredients and biodegradable - Works in temperatures down to -20°C

Fingerprints and glossy marks are now a thing of the past. Matte Finish Detailer has been specifically developed for satin matte paints, matte finishes and matte vinyl wraps. The premium-grade formula will leave any matte surface with a streak and gloss-free protective finish that reduces dirt adhesion. - Quick to use spray developed specifically for matte finishes - Leaves a non-sticky, streak and gloss-free protective finish - Carbon Fiber safe - Biodegradable

Silicon Shine not only leaves your bike looking factory fresh, but it also acts as an amazing friction reducer for suspension parts and reduces dirt adhesion. Spray it onto your fork stanchions and rear shocks to reduce resistance for a silky smooth, World Cup performance. - Protects and leaves a sparkling shine on metal, plastic & rubber parts - Reduces friction on fork stanchions and rear shocks - Silicon formula prevents grime build up on treated surfaces - Cuts down on future cleaning and maintenance

Disc brake rotors should be regularly checked for wear to ensure safety and performance. The DCA-1 installs onto most digital, dial, or vernier calipers (including the Park Tool DC-1) and features protruding contact points that allow measurement of the center of the braking surface, bypassing the unworn edge to ensure an accurate measurement. The conical end points of the DCA-1 can be used to measure center-to-center distances of bolt holes for calculating bolt circle diameter (BCD) of chainrings and cranks. - Compatible with most standard vernier, dial, and digital caliper designs

A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 36-notch tool fittings, including Praxis Works M35 bottom brackets. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. Fits 36-notch bottom bracket tool fittings with a major diameter of 51–53 mm and a minor diameter of 50.7 mm, including: - Box® Two Oversized M35 - Praxis Works® M35

200 Hour/1 Year Service Kit (Includes Dust Seals, Foam Rings, O-Ring Seals, Damper Sealhead, Air Spring Sealhead) - Boxxer RC2 C1 (2019)

Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.

Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.

200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals, Charger 2 sealhead, SA sealhead) - RS-1 RLC/RL A1 (2018+)

RockShox, 00.6815.066.020, Reverb post bleed tool

The Headset Press Pro Install Kit is a robust, and easy to use tool. The kit includes a machined aluminum handle, 1/2" threaded rod, two machined aluminum drifts and the adjustable press stop allowing for easy drift placement. One drift is machined with multiple steps to fit common head tube inner diameters listed in the compatibility tab below. The other drift has two sizes to press in cups with either 1-1/8" or 1-1/2" bearings. - machined aluminum handle and drifts - red anodized drifts and handles - zinc-plated 1/2" diameter threaded rod - long threaded rod works with long head tubes up to 250mm includes - 1 head tube drift includes - 1 headset cup drift - 1 adjustable press stop - 1 threaded handle includes on 1/2"-13x17" unc threaded rod

Factory service kits for Reba A7 forks

Thru Shaft Bleed Plug (Required for Thru Shaft 200 hour service) - RE:Aktiv Thru Shaft Shocks

Rear Shock Piston Bolt Socket Tool (used to remove piston bolt) - Deluxe NUDE

Attractive, durable foam-lined zipper carry case. Perfect for protecting your tool and keeping your bits within easy reach. 12 of the most common Bit sizes for bicycles are included inside. Weather-resistant case materials and impact protection make this the perfect case to add to your toolset-to-go. A complete pocket multi-tool! Three-way pocket Ratchet with Extension and T-Handle function, all in a compact, lightweight design to carry on your bike! The Patented reversible thumb-wheel ratchet head is rated to up-to 60Nm of total force, so this tool can even be used to install and remove Pedals. A high quality, durable tool. Prestacycle T-Handle 3 way Ratchet is compatible with all tool bit sets from Prestacycle and all standard ¼ bits. The patented Ratchet head firmly holds bits in place without a magnet. Releasing the bit is simple with a finger-press into the hole on the top. The ratchet offers an easy to use thumb wheel to speed screw installation and removal. The ratchet reverse knob is easily accessible right on top of the tool. Highest quality bits Prestacycle offers the highest possible quality 1/4" hex tool bits for use on Bicycles and much more. Our bits are compatible with all Prestacycle hex-based hand tools, and are industry-standard to fit all other tools that use 1/4" hex bits. Engineered for long life All Prestacycle Professional bits are made with hardened S2 steel, which is much stronger than most hand tools which are made of CRV Steel. S2 steel also resists stretching, preventing rounded edges on the bits that could damage bolts. We apply nickel-plating to all Professional bits to prevent marring to Stainless Steel, Aluminum and Titanium screws and to provide a long-lasting finish. Specific hex bits have micro surfacing to reduce slippage when in use. Specifications: - Carry-along pocket Ratchet with 1/4" bits set - Remove and install all kinds of Bolts and Screws on your Bike - Slimline 100mm Extension can also be 50/50 installed to use as a T-Handle. - Patented Reversible Ratchet with thumb wheel. - Heavy-duty design withstands up to 60Nm of force. - Uses standard 1/4" Hex bits of all sizes. - Dimensions 4.5" x 5/8" x 7/16" (119mm x 16mm x 12mm). - Tool weight (including extension) is only 88 Grams! - 12 piece Bicycle Tool Bits set - Precision tools in 12 unique sizes specific for bicycles - Hardened steel bits are non-marring on titanium and alloy bolts - Trim-able bit carrier for a custom tool-set to-go Sizes: - HEX: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm - TORX®: T10, T20, T25, T30 - SCREWDRIVERS: PH1

Simply Accurate – Maintenance-free, Reliable and Affordable Our torque tools use intelligent design for accuracy without the need for expensive calibration. An industrial-grade internal spring manufactured within extremely tight tolerances pre-determines torque setting. The tool does not need to be set into calibration and cannot shift out of calibration. Easy to use Ergonomic handle fits your palm with a four-finger grip to make wrenching easier. Tool provides an unmistakable 20 degree overrun when the torque limit is reached. Users can be confident knowing they have the correct tension. Low profile allows the tool to fit into more places for use, overall 60% lower height than tools costing twice as much. Use it like a tool – safe to un-screw! Prestacycle's TorqKey is fast and easy-to-use as an everyday tool. Color-coded tension markings on both sides make it a quick-grab on your workbench. 50% thicker walls in the bit shaft make our tools stronger and more reliable than others. They provide Torque relief in the right (clockwise) screw tightening direction, and hold firm in the left (counterclockwise) unscrew direction. You can unscrew fittings that were just tightened with the TorqKey. This is very handy when making multiple attempts to get a cable adjustment just right. NOTE: Do not use TorqKey to remove stuck, damaged, rusted or over-tightened fittings. More Options Prestacycle TorqKeys are available in 4Nm, 5Nm, 6Nm, 7Nm, 8Nm, 10Nm and 12Nm. Combine TorqKeys with our Ratchets and Bit sets to make a more complete tool set for Bicycle servicing. Standard Magnetic Hex Tip works with our 20 Piece Bicycle Bits set, our long Bicycle bits and any other 1/4" Hex bits. Prestacycle TorqKeys are different… designed from the start with real-world experience on Bicycles. Specifications: - Torque value accurate to + / – 10%. - Provides 20 degree overrun when maximum torque is reached. - Overrun provides user with unmistakable feedback when torque value is reached. - Polymer T-Handle ergonomically designed for comfortable four-finger & palm grip. - Color-coded tension markings on both sides. - 12mm wide Zinc shaft has 50% thicker walls – stronger than other Torque tools. - Magnetic 1/4" hex bit retention makes bit changes easy. - Torque accuracy life-cycle exceeds 5000 cycles. - Simple to Judge – If the logo is worn, the tool is past life. - Replacing the tool costs less than other tool's calibration service. - Height: 64.5 mm, 2 1/2 inches. - Width: 81 mm, 3.18 inches. - Weight: Approx. 75 grams. - 1 Year limited consumer warranty. Disclaimers Check with the manufacturer of your components and fittings for proper torque specifications. Always follow Manufacturer guidelines for installation and removal of nuts, bolts and screws.

Maxima Plush Dynamic is an advanced specialty fluid formulated for high-performance suspension systems. Formulated and tested with OEM engineers and designed for use in lower fork legs and multiple other non-damper components. Surface active technology reduces static and dynamic friction and considerably lowers the force needed for easy breakaway, providing smooth action throughout the entire range of travel. Contains special seal conditioners for extended seal life. Ultra-clean detergents keep the system clean and off long-life, trouble-free operation. For all lower fork legs and other non-damper suspension components, including All Mountain, XC, Gravel, Downhill, Enduro, and Freeride. Also approved for use in some dropper seat post designs. NOTE: Rockshox will be listing Plush Dynamic as the lower lube to use in all MY23 + beyond forks. Dynamic Light is a direct replacement for 0w30 in all forks specifying the use of Rockshox 0w30. Features: - High-performance lube for lower fork legs. - Dynamic Lube activates on loaded bushings and seals. - Reduces static (stiction) and dynamic (running) friction. - Proprietary additive system minimizes wear and keeps the system clean. - Long-life fluid extends the time between rebuilds.

High-performance brake and clutch fluid designed to lubricate and protect critical brake system componentry while providing reliable stopping power. Anti-vapor lock formulation maintains responsiveness and performance by fighting both water contamination and vaporization. Advanced chemistry resists corrosion, and oxidation and is compatible with SBR, EPDM, and natural rubbers. Exceeds the requirements of US FMVSS 116 DOT 5.1, DOT 3 & DOT 4, SAE J1703, SAE J1704, and ISO 4925 (Classes 3, 4 and 5.1). For use in all hydraulic clutch systems and all brake systems specifying DOT 5.1 brake fluids. Do not use in DOT 5 silicone brake systems or mix with silicone-based fluids. Features: - For use in all vehicles specifying DOT 5.1 brake fluid. - Durable and reliable stopping power. - Anti-vapor lock formulation maintains a responsive lever and pedal feel. - Resists corrosion, oxidation, and boil-off. - Mixes with other DOT 3, DOT 4, and DOT 5.1 brake fluids. - Exceeds US FMVSS 116 DOT 5.1, DOT 3 & DOT 4, SAE J1703, J1704 and ISO 4925 (Classes 3, 4 and 5.1).

Because we love the Morgan Blue Aqua Proof Paste, we decided to work with them on a grease-for-bearing service. Low Friction grease is resistant to high loads and smoother than a fresh jar of Skippy. Use this grease inside your bearings, not for the installation of any parts. The 5ml size is for a single bottom bracket service, the 200ml jar will last a long time, even for professional use. - Designed specifically to work with Kogel Bearings hybrid ceramic bearings - Bearing service once a year is recommended and required for a full 2-year warranty. Service consists of removing seals, thorough cleaning of bearings and races with a degreaser (no disassembly needed), application of Secret Grease Mix, and replacement of seals

Specifically formulated for Fox dropper posts

Prestacycle One is a complete Lubrication and Cleaning product for your Bicycle. It is Bio-based and USDA Certified. As a lubricant, it is so good it broke the ASTM 4 Ball Wear test. As a cleaner, degreaser and corrosion protectant, it provides the ultimate in bicycle care, all in one environmentally friendly package. Uses: - Dry Lube - Wet Lube - Bike Wash - Degreaser - Rust Remover - Rust Preventer - Anti-Seize - Paint Protectant - Metal Polish - Leather Conditioner Performance: - Substantially reduces friction improving pedaling, shifting and drive train performance - Sheds water - Clean, Lube and Protect with one product - Improved lubrication and wear resistance even when run dry - Temperature performance range from -48F to +600F - Extends chain life - Seasons chains and cables after 3-4 applications - State of the art penetrating characteristics - Road, Track, Gravel, CX, MTB, BMX & eBike - Motorcycles - Skateboards Technical: - State of the art Sub-Micron formulation enables the product to be run wet or dry for all riding conditions - Not vegetable oil or vegetable ester based. Will not dry out or gum up - No thermal decomposition even in extreme riding conditions - No Petroleum - No Alcohol Environmental: - Green Engineered - Bio-based Product - Non-Toxic - Biodegradable - USDA Certified - Made in the USA with USA raw ingredients Meets or Exceeds: - MIL-PRF-6340E ASTM D93 Flash Point - MIL-PRF-6340E ASTM D445 Kinematic Viscosity 104 F - MIL-PRF-6340E ASTM D4172 Wear Preventative Characteristics - MIL-PRF-6340E ASTM D5620 Load Carrying Capacity Jaw Load - MIL-PRF-6340E ASTM Corrosion Production - ASTM D 5183, Determination of the Coefficient of Friction for Lubricants: No Fail

- Machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body - Anodized in Wheels MFG red.

- The factory standard grease for leading bike and bearing manufacturers that exceeds the unique and demanding requirements of bicycle bearings - Prevents wear and distortion in headsets, hubs, and bottom brackets

Finish Line® Dry Lube is the bicycle industry's original and most versatile dry-style chain lubricant. It is formulated with high-performing nano-ceramic boron nitride. This Non-Stick Ceramic Technology is 100% fluoro-free and sets up with a dry ‘wax-like’ film. It attracts less grime and delivers a low coefficient of friction over long re-lubrication intervals. It is ideal for riding on or off-road, in dry, dirty, dusty environments, and also holds up well in wet conditions. Designed for chain applications, it can also be used on derailleurs, shifters, cables, and brake pivot points. Dry Lube delivers optimum drivetrain efficiency without attracting excessive amounts of abrasive contaminants. • Formulated with Non-Stick Ceramic Technology • Lowers friction, improves pedaling efficiency, reduces wear • Quickly sets up dry and clean • Minimizes the attraction of abrasive contaminants • Low surface tension easily penetrates chain pins • Biodegradable and 100% fluoro-free