Gifts Under $200

Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

The Steel Hitch provides the critical connection from your Burley Trailer to your bicycle. The hitch installs easily on the rear skewer of your bike, and then stays attached so the Burley can be connected at any time. If you’d like to swap the Burley from bike to bike, pick up a couple spare hitches and install them on the extra bikes so the hitch doesn’t need to be un-installed when swapping bikes.

Completely strip and prep your chain for wax in 10 minutes. Submerge the chain or even just drip it on the chain, rinse, and apply super secret. Take all the work and harsh chemicals out of chain waxing! Specifications: - Biodegradable ingredients - Cleans chain in 10 minutes - Improves wax treatment adhesion - Strip chain on or off bike - Made in USA Far and away, the largest hurdle for people converting to a waxed drivetrain has always been the need to completely strip the factory lubricant from the chain in order for the wax to properly adhere. Traditional methods have involved using 2-3 different solvents and rinse steps, moving from non-polar solvents that thin greases and oils to progressively more polar solvents that evaporate quickly to eliminate residues. For the design of SILCA Chain Stripper, we started from the end and worked backwards, identifying chemicals which drive out greases and oils while promoting wax adhesion to metal. The result is an organic cleaner that lifts and encapsulates greases and oils allowing them to easily be rinsed away from the metal surface. The result is the world's first wax optimized chain cleaner which not only removes greases and oils, but actually primes the metal surface for improved adhesion from wax lubricants. The aggressive 'lift and encapsulate' action of SILCA chain stripper allows for 2 quick and easy cleaning options. Option 1: For hot-melt waxing a new, factory chain with SILCA Secret Blend Hot Melt, simply immerse the chain in the Stripper and agitate 30 seconds. Allow to sit for 5-10 minutes and agitate again for 30 seconds. Remove the chain from the Stripper and rinse with water and then drop the chain directly into the hot wax, the water will boil off within a few minutes and the chain will be fully waxed with up to 30% longer application life than a chain cleaned by traditional methods. Option 2: For drip applied waxing of a new or nearly new chain with SILCA Super Secret without removing the chain from the bicycle. Apply 1 drop of SILCA Chain Stripper to each roller of the chain while backpedalling. Allow to soak for 5 minutes. Backpedal 10 revolutions of the crank to agitate cleaner and re-apply 1 drop per roller allowing to sit for 5 more minutes. Rinse with clean water while backpedalling at least 10 revolutions.

The ultimate bikepacking bag, the framebagracadabra frame bag utilises the space within the main triangle and doesn't require any racks or mounts; your stuff is neatly snugged in your bike's belly, with no opportunity for bounce or waggle. Perfect for storing an extra layer and snacks on day rides or as part of a full bikepacking set up. By keeping heavy things near the centre of your bike, you can carry those tools and cans of soup without compromising your bike's handling. A recycled HDPE plastic bottom helps maintain its cute dogfish shape, whether empty or full. Elastic webbing at the top takes the strain off the zipper when the bag is full, helping to prolong the life of the zip. A mesh pocket inside allows you to separate your good snacks from your emergency snacks, for the most efficient snack stops. Includes multiple removeable and adjustable straps for a great fit! See our Fit Guide here and find your perfect fit. Made in-house, London, UK

With your everyday ride in mind, the Stow Away Gilet delivers exceptional reliability for unpredictable weather. Suited to early morning rides and cold descents, this lightweight gilet easily packs away in a back pocket, always leaving you well equipped and prepared for the sudden shower. This piece stands up to the elements while helping you stand out on the road with its attractive new seasonal colourways. Constructed from a DWR (Durable Water Repellent) treated Japanese fabric technology, the gilet offers optimal wind protection and will withstand the occasional shower. This gilet features a double-sided zipper with a woven zip puller to provide easy access to your jersey pockets. A mesh-lined collar helps prevent overheating and the stretchable mesh side panels keep the gilet snug to your body while providing an optimal level of ventilation. A guarded zip end is implemented in order to prevent skin irritation. 100% Japanese nylon Race fit Two-way zipper for easy access Road to Nowhere branded zip puller Stretchable side panels Packs easily into your back pocket Available in various colour options Made in Vietnam Care instructions Wash cool 30° / Use non bio detergent / Iron low / Do not bleach

Alger because we ride the Alger Grade, one of our favorite local and remote gravel roads, and Draw because of the drawcord opening. It’s the perfect seat pack for your shorter gravel (or road) rides, and it eats fat bike tubes, tools, and extra layers for lunch. With the drawcord opening and lid, it opens wide to quickly retrieve your gear when you need it. The two compression straps, coupled with an HDPE stiffener, cinch the load so it stays in place without sagging or swaying whether it’s jammed full or completely empty. - 1000 Denier Cordura Nylon Exterior - Sailcloth Interior - HDPE Plastic Stiffener - Hypalon Reinforced Seat Rail Strap - Toughtek Gripper and Velcro Seat Post Cinch

Roomier through the hips and thighs. Tapers like the original fit from the knee down. If our original cut was a little too tight for you this is the answer. • Made in USA • 32" inseam • Raw untreated 12 oz. with 2% Lycra™ • Patented Cadence seat reinforcement to slow blow out from riding • Double layer back pockets • Reflective back patch detail • Custom Cadence hardware • Perfect riding pant • Looks better with age Models in photos are both 6'3 and around 185lb. Wearing size 33

The all-new Range Torque Wrench + Ratchet Wrench Combo simplifies proper bike maintenance by combining the precision of a bar-style torque wrench and speed of 2-way ratchet wrench in a compact, lightweight and portable package. There’s no need to set a specific indexed torque, or go searching for missing bits – select your bit from the case’s labeled inserts, ratchet for quick thread engagement and use the torque head to match manufacturer specifications for torque. - Ratchet wrench for speed; torque wrench for precision - Portable and light – fits in a ride pack or travel-transport - Infinite torque capabilities within the 2-10Nm range - 2-way ratchet wrench protects the integrity of torque wrench function - 6-degree ratchet engagement maneuvers in tight spaces - Torque validation for “bolt-checks” on any bicycle components - Compact head and bit design allows clearance and full function in tight spaces - 14 labeled S2 Steel* allen key, torx bit, and Phillips head bits covering the most common bicycle applications - #2 Philips; Torx: T10 , T20, T25, T30; Hex: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm; - Extended length: 5mm Hex & T25 Torx - User ‘zero’ ensures accuracy of the torque bar for every use - 3rd-party tested and validated for accuracy and longevity (exceeds ISO standard) *S2 Steel is industry-leading tool steel for precision edges and durability

Spare/replacement lens for the Aim sunglasses. With the spare lenses for the Aim sunglasses, it's possible to change lenses for a lighter or darker tint, so you can use your sunglasses in a wider range of conditions. The Clarity road lens technology filters specific peaks in the color spectrum to enhance precision vision.

Featuring 800 lumens of crystal-clear illumination, the Lite Pro 800 Switch (High Volt) e-bike cycling light maximizes usable output with its enhanced Maximum Optical Reflection (MOR) lens while a compact CNC-machined aluminum body is equipped with cooling fins to maximize heat dissipation. Compatible with higher-voltage e-bike inputs (12-48v), the Lite Pro draws 8 watts during operation and easily plugs into batteries from top makers including Bosch, Shimano, and Yamaha. An integrated remote switch simplifies operation while the inclusion of both an e-bike stem mount and aluminum CNC fork mount maximize the light's versatility. A 130cm power cable is included. - Max Lumens: 800 - Weight: 173g

Nightrider Lumina Pro Series features 5 light levels plus 3 Daylight Flash modes and customizable light output and flash patterns by way of NiteRider App. Compact size fits on crowded handlebars and fuel gauge provides battery life at a glance. NiteRider Vmax+ 150 Taillight features 150 lumens in a low profile design with a full LED light panel.

Named after our favorite San Francisco burrito shop, the Toro brings advanced materials and weatherproof construction to the traditional burrito-style handlebar bag. Compatible with all road, gravel, MTB, and commuter bikes. The Toro is super stable with zero bounce even on the roughest trails, and the universal attachment system ensures a perfect fit with all handlebar and stem sizes. - Universal fit for any handlebar and stem combo - Frame sheet stiffener maintains structure and shape - Super stable / Zero bounce - Suitable for Road, Gravel, MTB, Townie - Weatherproof - Internal Key Clip - YKK Aquaguard Zippers - Hypalon accessory lash points - Subtle laser etched logo treatment - Made in the USA SPECIFICATIONS - Dimension Polyant X-Pac® and Cordura Multicam fabrics - Dimensions: 9" x 4" - VX Weight: 0.28lbs (0.128kg) - Multicam Weight: 0.31lbs (0.14kg)

Our Classic Freehub Grease is specifically designed for all freehubs that require a lightweight grease. These style hubs we like to call the more mechanical hubs. Unlike the simpler, fewer parts of the Pawl style hubs. Dumonde Tech Freehub Grease performs in a broad temperature range from the heat of summer to the frigid temperatures of the north. "Pour Point" of Freehub Grease is -30 degrees. Follow the manufacturer's specification for the volume required in your freehub body to experience the superior performance of Dumonde Tech's Freehub Grease. Our Freehub Grease is Exclusively used by: Industry 9 "Legacy", "Hydra" and "101" hubs and Stan's NoTubes, Hermes Sport, and Hawk Racing. Used, endorsed and/or recommended by: Crank Brothers, Boyd Cycling, Ritchey Design and Paul Components. Campagnolo North America recommends our Freehub Grease as an alternative to their lb-100 Grease as it is no longer available in North America. Our Freehub Grease is a proven replacement for any hub or wheel company's grease.

The 100% recycled nylon, take-it-anywhere jacket with weather-resistant protection for high-output endeavors. Made in a Fair Trade Certified™ factory. Specs & Features - Fit: Slim fit - Featherweight 100% Recycled Nylon Shell: Featherweight 100% recycled nylon ripstop shell with a durable water repellent (DWR) finish made without perfluorinated chemicals to resist light moisture - Integrated Stuffsack: Zippered left-chest pocket converts to a stuffsack with a reinforced carabiner clip-in loop - Slim Fit with Drop-Tail Hem: Slim fit with a slight drop-tail hem offers optimal movement - Adjustable Hood: Hood adjusts in one pull and won’t block peripheral vision - Half-Elastic Cuffs and Drawcord Hem: Durable half-elastic cuffs and a drawcord hem help to seal out weather - Reflective P-6 Logo: Reflective P-6 logo on the left chest - Supporting the People Who Made This Product: Made in a Fair Trade Certified™ factory, which means the people who made this product earned a premium for their labor - Country of Origin: Made in Vietnam - Weight: 105 g (3.7 oz)

We took the same great fit and comfort of our Signature Short and sought where we could make the short more affordable without generally compromising quality. A new lightweight, recycled fabric gives balanced compression and an opaque finish. With the same leg gripper and trims found on the Signature and a high-density chamois, these shorts provide excellent support in a slightly thinner form - perfect for shorter distances or the mid-week lunch ride. With all that packed in, the Foundation is a premium bib short at a not-so-premium price. Features - 78% Recycled nylon fabric with Extra Life Lycra: balanced compression & breathability, comfort and longevity - High Gauge for excellent recovery and second skin fit - 5-Panel design: anatomically cut, compressive and supportive to enhance performance - Foundation chamois, developed with Elastic Interface for excellent mid-distance comfort & support

For bears! The Ursack Major is a lightweight yet extremely durable alternative to traditional canisters and is one of Ursack's best-selling products. All Ursack bear bags are made of ultra-high-performance UHMWP fabric and designed to prevent bears from getting your food in their territory. OPSAKS Available HERE: Recommend the 12x20 Features: - Certified Bear Resistant - Collapsible and easy to store - 6 foot–high tensile strength with reflective tracer - Reflective Exterior Tag for increased visibility at night ***Discounts are not available on Ursack products. Specs: - Volume: ~10.65L - Capacity: ~5 days of food for 1 person - Dimensions: 12.5" W x 18" H - Weight: 7.6oz Materials: - UHMWP fabric

The Macro Drive 1300XXL is a new high-powered LED cycling light offering up to 1,300 lumens of output. It features our Tri-Focus optics, which creates a brighter center spot in a large wide-angle pattern. It’s constructed from machined aluminum and has cooling fins that optimize performance. The light is micro-USB rechargeable and it can run for up to a massive 148 hours on a full charge. A versatile strap secures it to a variety of handlebar sizes, and the 1300XXL is Remote Switch compatible. Specs - Max Lumens: 1300 - Weight: 208g - Max Runtime: 148 Hours (In Femto Mode) - Recharge Time: 3:30Hours

The Manivelle Front Rack is the result of our collaboration with Caddie, a historical French manufacturer based in Alsace, which is 15km away from our workshop. Their know-how and experience allow us to propose a high quality and durable commuter front rack With its adjustable mounting kit, our commuter rack fits on most of city and touring bikes, even those without mounting eyelets on the fork. Do you have a question about the product? We invite you to visit our F.A.Q. https://www.cyclesmanivelle.com/f-a-q or contact us at contact@cyclesmanivelle if you can’t find your answer there! Specifications: - Dimensions : 27x38cm - Max load : 10kg - Weight : 940g - Compatible with wheels from 26’’ to 29’’. Need a drilled fork - Supplied with screws, adjustable mounting kit and light support - Ultra strong Zinc-plated steel

Look, your child is destined for greatness. We won't dispute that. But, why wait until they can walk for them to rock their awesomeness? If they're crawling, they're ready to explore the world. Attach the Strider Rocking Base to a Strider 12 Bike and get them rocking. The rocking base doesn't just familiarize them with a bike, the rocking motion helps develop their balance, spatial awareness, and core strength. No batteries. No annoying sounds. Just pure, rocking fun. - Compatible with the Strider 12 Classic, Sport, and Pro Balance Bikes - When the Strider 12" Bike is attached this product is intended for ages 6 months – 5 years old for Strider Sport and Pro, and ages 6 months – 3 years for Strider Classic.

The Slice is sleek and streamlined, maximizing storage without getting in the way of your knees. Designed to fit perfectly in the front triangle of road and gravel frames and sized to work alongside two water bottle cages so that you won’t have to sacrifice storage for hydration. Made in the USA from Dimension Polyant X-Pac® fabrics and Hypalon, it is lightweight, highly water resistant and features YKK Aquaguard zippers on both the main compartment and external pocket. Product Details - Universal fit for road and gravel bikes - YKK Aquaguard Zippers - Weather resistant - Lightweight - Made in USA Specifications - X-Pac® and Hypalon Fabrics - Dimensions: 12" x 10" x 8" - Weight: 129g - Capacity: 1.56 liters

Made of durable and waterproof polyester fabric, the ORTLIEB Ultimate Six Classic is a compact handlebar bag that plays a key role in the gear management plan of all bike touring enthusiasts.

Waste not, want not is the rallying cry behind the Hold Fast Half Frame Bag. Pack smarter by making clever use of the inner triangle of your frame. Finally! A practical home for awkwardly shaped essentials like your pump, your tent poles, or your hydration bladder. Running frame-mounted water bottles? Don’t fret: We took extra care to maintain clearance so you can easily slip your bottles in and out of their cages. The Hold Fast Half Frame bag will add functional capacity to your setup, whether it’s for your daily commute or an overnight adventure! The Hold Fast Half Frame Bag is made from recycled polyester and contains roughly 5-7 recycled bottles rescued from polluted rivers. Description The space beneath your top tube has always been a coveted zone for convenient and spacious storage capacity, and with the Hold Fast Half Frame Bag, Swift Industries has at last entered the triangle! The roomy main compartment, accessed by a water resistant zipper, is a perfect home for long or oddly shaped items commonly used by cyclists — think pumps, locks, water bladders, etc. On the non-drive side of the bag you will find a small zipper pocket with room to stow a wallet and snacks. There’s even more to the Hold Fast Half Frame Bag: on the underside we added an external daisy chain that runs the length of the bag to give you the flexibility to add capacity or quickly lash on last-minute or mid-ride items to the bottom. In order to accommodate different frame sizes the Hold Fast Half Frame Bag comes in three sizes. Please, check the measurements of each size and measure the internal dimensions of your frame to get the bag that will fit best. Grab your measuring tape and queue up our Hold Fast Half Frame Bag sizing guide here. Cool Features - Challenge Sailcloth ECOPAK (EPLX400) shell fabric - Challenge Sailcloth recycled polyester bag cloth rip stop (450D) - Large, main pocket and small, external organizer pocket - Water resistant zippers - One-wrap velcro attachment straps - Hydration hose/cable port on top panel of bag Measurements - 2.75 L: 17.5” X 4” X 2.25” - 3.25 L: 19.5” X 4.5” X 2.25” - 4 L: 21” X 5.25” X 2.25”

When searching for a bag partner we looked locally to the folx who we think are the best in the business, the North Shore’s own, Cedaero. Their commitment to quality and to sourcing only made in the USA components is something that really calls to us, and the fact that they are incredibly kind and wonderful human beings sealed the deal. We’ve worked with them to select colors and combinations that are both stylish and timeless, and that will age to perfection with use. Cedaero Bar Hopper: From town to trail, handlebar bags are ideal for all types of riding and adventures. This one sports a gusseted zipper for easy access to your items and a velcro One-Wrap strap and daisy chain on the backside to ensure that things stay composed when everything else gets rowdy. These are a must in any cyclist’s repertoire of accessories. *Note: canvas packs may require occasional re-waxing with heavy use, and cannot be run through the washing machine - Brush Brown Waxed Canvas - Made in Minnesota of domestically sourced materials - 1000D Cordura Nylon or 15oz Martexin Waxed Canvas Exterior - 200D Nylon Silver Lining - 9.5” Wide x 5.5” Diameter - Velcro One-Wrap strap stem/steerer tube strap - Daisy chain on the front for various accouterments - #9 Ideal Zipper with Nanosphere Coating - Interior Pocket and Key Hook

This basket find its origin in our collaboration with CADDIE®, the french historic manufacturer of shopping carts. Their know-how and experience allow us to propose a high quality and durable basket. With its adjustable mounting kit, our commuter rack fits on most of city and touring bikes, even those without mounting eyelets on the fork. Do you have a question about the product? We invite you to visit our F.A.Q. https://www.cyclesmanivelle.com/f-a-q or contact us at contact@cyclesmanivelle if you can’t find your answer there! Specifications: - Size : 26x36x11cm - Max load : 10kg - Weight : 1,3kg - Compatible with wheels from 26’’ to 29’’. Need a drilled fork - Supplied with screws, adjustable mounting kit and light support - Ultra strong Zinc-plated steel

This aluminum wrench and insert kit is designed to provide a bike tool solution that is compact and lightweight enough to carry with you on the road but still be durable enough for everyday use. The aluminum wrench has magnets that hold the nickel plated steel inserts in place. The wrench has splines for bottom brackets and centerlock rotors and the four included inserts cover most common bike applications. This kit includes: - Pack Wrench - ultralight 1" hex and bottom bracket wrench - Ultralight Cinch and ISIS Spline Wrench Insert - older ISIS bottom brackets or the Race Face Cinch direct mount chainring system - Ultralight Cassette Lock Ring Wrench Insert - cassette lockrings and some centerlock rotor lockrings - Ultralight 8mm Hex Wrench Insert - pedal removal and other 8mm hex applications - Ultralight 16mm Hex Wrench Insert - Race Face Cinch aluminum spindle bolts, frame pivots, and other 16mm hex applications All inserts are made in the USA and CNC machined from hardened steel with electroless nickel plating. Compatibility - Designed for use with most modern mountain and road bikes. - 1-inch hex drive interface compatible Related Products - Pack Whip - Ultralight chain whip - Pack Pliers - Master Link Combo Pliers Tech Specs - Weights: Pack Wrench • 88g | Cassette Lock Ring Wrench Insert • 31g | Cinch and ISIS Spline Wrench Insert • 56g | 8mm Hex Wrench Insert • 63g | 16mm Hex Wrench Insert • 78g - Material: wrench • aluminum | Inserts • nickel-plated 4140 Chromoly steel -Made in the USA

The Bandito Bicycle Bag is perfectly sized for your essentials, like tools, an extra layer, snacks, and other small necessities. It is at home on both your road bike and gravel rig and stays secure with two included Swift Straps and an elastic lash cord. Damn, it’s cute, especially with the whimsical patch artwork by Japanese artist Okataoka. - Patch with artwork by Okataoka - Includes Swift Straps, 9? Pair - Attachment points for standard saddle tab spacing - Side d-rings for a shoulder strap - Structured body - Horizontal front daisy chain - Measurements: 8.5?w X 5.5? diameter - Capacity: 3.2 L - Weight: 8 oz Built with: - CarTex Wax Cordura 12oz - Packcloth - Coverlite™ - HDPE - Made in Seattle, USA.

Featuring FlyFree, our latest generation Signature Chamois and a refined fit. Our flagship bib designed for high performance riding, the Signature has won awards, gained a reputation for comfort and raised the bar for performance. Now with the latest iteration of our pee-break friendly functionality - FlyFree - we've improved the fit and comfort and streamlined the look. Premium fabrics, balanced compression and the finest supple bib straps and grippers available make this a go-to for any ride. Black color way is made from 100% Recycled Lycra fabric: part of our commitment to finding a better way forward Premium Italian Compression Lycra: balanced compression & breathability, excellent opacity High Gauge for excellent recovery and second skin fit 5-Panel design: anatomically cut, compressive and supportive to enhance performance Seamless Microfiber bib straps & leg gripper Reflective logos for added visibility Updated Proprietary Signature Chamois developed with Elastic Interface Patent Pending FlyFree design: the latest generation of our pee-break functionality without removing jersey, helmet or glasses. No more zipper, no compromises.

Mission shorts use a bluesign®-approved fabric made from recycled nylon. The 4-way stretch woven technical fabric makes them light enough to ride in and durable enough to be your daily driver. Our popular shorts feature a versatile style and are ready for any adventure. Pair them with our trail shirt for a full day of adventure or class it up with your button-down shirt. These shorts are perfect for traveling the country, shreddy dirt sessions, or obligatory Sunday yard work. Stash your valuables in the rear zippered pocket and get lost. Feel good and do good knowing that the recycled fibers used in construction reduce energy and water consumption while cutting greenhouse gases and waste from landfills. Sewn right here in the SF Bay Area. You could wear it on your bike, Ornot. FEATURES - 8.5" inseam. - bluesign®-approved fabric with 95% Nylon / 5% Elastane - Full panel gusset and 4-way stretch for increased mobility. - 4 Pocket construction, 1 rear zippered pocket for secure storage. - Designed in San Francisco and sewn in Oakland, Ca.

Drummond because we ride the Drummond Grade, one of our favorite local and remote gravel roads, and Draw because of the drawcord opening. It’s the perfect seat pack for your sub 24 hour gravel (or road) rides: not too big, not too small. Large enough to carry a spare tire, tube, tools, plus a jacket, hat, gloves, etc. With the drawcord opening and lid, it opens wide to quickly retrieve your gear when you need it. The three compression straps, coupled with an HDPE plastic stiffener, cinch the load so it stays in place without sagging or swaying whether it’s jammed full or completely empty. 1000 D Cordura Nylon in 16 colors White Sailcloth Interior HDPE Plastic Stiffener Hypalon Reinforced Seat Rail Strap Toughtek Gripper and Velcro Seat Post Cinch

In-bike storage and essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customizable rubber flap that can be cut to meet your handlebar inner diameter. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (included) - Magnet on bottom end of tool allows for storage on steel bike stands (or refrigerators) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops) - Chain & Tire Plug tool compatible with all bicycle chains including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five strips included; refills available - Hardened steel pin for lifetime durability - Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench - Storage sleeves made of vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Includes Drop Bar Fit Kit to customize fit for larger-diameter road handlebars