Parts

The M30 is part of our 30mm spindle line of cranks which also includes the A30, R30 and G30 models. The “M” stands for mountain and the “30” is for the 30mm spindle. The best way to describe this model is, “It’s a mountain bike crank”. Simple. Note: Spindle, crank bolts, extractors, adjusting collar, and chairing lockring included. Chainrings and bottom bracket sold separately. Features: - Black anodized - Extractor caps : black - Length: 170mm Compatible with: - White Industries chainrings: TSR 1X/singlespeed. 8/9/10/11/12 and 12 flat-top chains. Shimano 12 speed chains must use a SRAM Eagle 12-speed PowerLock connector. - TSR Boost 1X/singlespeed: 8/9/10/11/12 and 12 flat-top chains. Shimano 12 speed chains must use a SRAM Eagle 12-speed PowerLock connector - VBC 2X: 9/10/11 speed chains and derailleurs (12 speed are too narrow). Campy and SRAM derailleurs not recommended. Shimano mountain 9/10/11 speed derailleurs are best with these rings on this crank. - Also compatible with Wolf Tooth “CAMO Direct Mount Spider For White Industries” - 5 different White Industries 30mm bottom bracket options - All 30mm cranks and spindles are made from U.S. sourced 2024-T365 aluminum Specs: - Designed around a 96mm OBW (Outer Bearing Width). This is the allowable outside-to-outside measurement of your BB bearings (with seals) when they are mounted to your frame. The bearing preload collar on the crank is adjustable and can accommodate slightly wider or narrower widths (+/- 1mm) than the target number. - Designed to fit 68mm/73mm or 86mm/92mm bottom bracket shells. 2x 2.5mm cup or spindle spacers needed on 68mm or 86mm shells. Part #BB30KIT includes both types of spacers - See “MARG30 Crank and Bottom Bracket Compatibility Chart” document below for BB/spacer info - Weight: 575g (175mm length w/spindle) - Q factor: 176mm

TSR (Tall-Short-Ring) 1X chainrings are designed to work with all modern 10/11/12 speed 1X drivetrain systems. The tall/short tooth profile helps prevent the chain from falling off the ring when riding through rough terrain and is a must on 1x drivetrains but is also compatible with singlespeed drivetrains. Made in our shop from U.S. sourced 7075-T6 aluminum (48 tooth ring is 6061-T6). - Fits White Industries MR30 cranks only - Works with SRAM 10/11/12 speed and 12 speed flat-top chains - Works with Shimano 10/11/12 speed chains - Works with singlespeed 3/32 chains - Available in silver and black - From 28 teeth to 48 teeth in 2 tooth increments Boost and non-Boost versions: - Standard/non-boost rings have a 3mm offset (inward) - Boost rings are flat (so 3mm outward of our standard/non-boost rings) - Standard/non-Boost rings can be flipped to give you 3mm more outward offset than our Boost rings)

T47 BOTTOM BRACKETS Our T47 bottom brackets are made for multiple configurations. Not only is it compatible with 22/24mm, 24mm, 29mm, and 30mm spindles but also 68/86mm and 73/92mm bottom bracket shell widths. All of our bottom bracket cups are made with 6061 aluminum with angular contact stainless bearings.* *29mm/DUB bottom brackets use radial ball bearings CRANK COMPATIBILITY: 30mm spindle internal or external 29mm spindle internal or external 24mm spindle internal or external 22/24mm GXP spindle internal or external BOTTOM BRACKET SHELL WIDTH COMPATIBILITY: 68mm 73mm 86mm 92mm

Our headset spacers are specifically designed to cleanly match our headset bearing covers and top caps for a smooth and seamless look. They are available in sets and individually. Details: - White Industries spacers are compatible with other headsets but not necessarily other headset spacers due to the smaller outside diameter of our spacers (see specs below) - "Tapered" spacers are designed to go directly above the headset bearing cover Specs: - Tapered spacers are 31.6mm outside diameter on top and 34.7mm outside diameter on the bottom - All spacers designed to fit a 1-1/8" (28.6mm) fork steerer

Our headset spacers are specifically designed to cleanly match our headset bearing covers and top caps for a smooth and seamless look. They are available in sets and individually. Details: - White Industries spacers are compatible with other headsets but not necessarily other headset spacers due to the smaller outside diameter of our spacers (see specs below) - "Tapered" spacers are designed to go directly above the headset bearing cover - Sets include 1 each of: 2.5mm straight (S2.5), 5mm straight (S5), 10mm straight (S10), 5mm tapered (T5), 10mm tapered (T10) Specs: - Tapered spacers are 31.6mm outside diameter on top and 34.7mm outside diameter on the bottom - All spacers designed to fit a 1-1/8" (28.6mm) fork steerer

In 2002 Doug White decided the world needed a better freewheel. Until then singlespeeders seemed to be content not knowing if their freewheel would last a week or a year, or fail a mile away from home or hundreds of miles. But what was certain was failure. Overnight the ENO freewheel became the standard to measure everything else against. Starting with a driver made from heat treated 4130 steel that houses 3 heat treated S7 tool steel pawls (6 on the Trials model), we add an 8620 steel case-hardened and electroless nickel-plated outer gear turning on an Enduro chromium steel bearing. We basically designed all the weak links out of the system. And because everything wears out eventually, we designed them to be rebuildable. ENO single and DOS ENO double freewheels feature 36 points of engagement while the Trials freewheels utilize a thicker outer gear (the base, not the teeth) and 72 points of engagement. Our freewheel bearings are ABEC 3 or 5 grade depending on freewheel type, are made from chromium steel, and use a special Mobil XHP222 extra high pressure grease. Note: All freewheels can use either 3/32” or ?” chains except 16T ENO single and all DOS ENO double freewheels (see FAQ below). FAQ Can I swap my lockring for a different color? No. Each freewheel size/model uses a specific lockring which we anodize a different color to make identification easier. - Blue: 16T ENO single, 16/18 and 16/19 DOS ENO double - Red: 17T-23T ENO single, 17/19 DOS and 20/22 DOS ENO double - Green: Trials 18T, 20T, 22T Why can’t I run a 1/8" chain on the 16T freewheel? - Because of the size of the driver and the bearings inside the gear, we are limited in how small we can make the diameter of the base of the gear. On the 16T you’ll notice a groove machined on the base next to the teeth which is needed to clear even a 3/32” chain. For an ?” chain that groove would need to be a bit deeper to allow the chain to fully seat down on the teeth but we can’t make the groove deeper without sacrificing the strength of the gear. Running an ?” chain will prematurely wear out the chain and gear. Why can’t I run a 1/8" chain on DOS freewheel? - Because there’s not enough room in between the teeth for the wider ?” chains. I’m a big/burly/fast rider. Will I break the standard freewheel and should I go with a Trials instead? - The standard freewheels are really, really tough and we haven’t seen an issue with failure on big/burly/fast riders. The main reason people want the Trials version is for the increased engagement (72 points vs 36 points). Can I rebuild my White Industries freewheel? - You bet. We sell the outer gears (they come with the bearing installed), bearings, pawls, springs, drivers, seals and lockrings if needed (did we leave anything out?). Basically, we’ll sell you whatever parts you need to get your freewheel working again. Specs - Threads: 1.375” x 24TPI - ENO single and DOS ENO double freewheels have 3 pawls and 36 points of engagement - Trials freewheels have 6 pawls and 72 points of engagement - Lockring colors: Blue: 16T single, 16/18 DOS and 16/19 DOS; Red: 17T-23T single; Green: Trials 18T, 20T, 22T - Freewheel measurements for chainline calculations: All freewheels are 18.4mm wide. On ENO single freewheels (standard and Trials) center of teeth are 9mm from the inner base of the threads. On ENO DOS double freewheels inside teeth are 6.1mm from the inner base of the threads and the outside teeth are 11.8mm from the base. Teeth are 5.7mm apart center to center. Tools - White Industries part #FWTOOLE 4-prong freewheel remover tool - Needed when removing our freewheels from our ENO ECC (eccentric) hubs - Works on our freewheel on standard axle hubs - Works on other freewheels with 4-prong tool interface - Park FR-6 4-prong freewheel remover tool will work on our freewheels mounted on standard (non-eccentric) hubs - Park SPA-2 (the red one) pin spanner needed to remove the freewheel lockring

The ZS44/EC44 headset is designed to fit frames with straight 44mm head tubes and can accommodate straight and tapered fork steerers with the appropriate crown race. The “ZS” stands for “Zero Stack” as the section of the cup that houses the top bearing sits inside of the frame’s head tube while “EC” stands for “External Cup” meaning the section of the cup that houses the lower bearing sits outside of the frame’s head tube. The “44” stands for the diameter of the “skirt” that presses into the frame. Made in the USA. FEATURES - U.S. sourced 6061-T6 aluminum - Machine engraved White Industries logos - Easily replaceable Enduro bearings - “Split” crown race for tool-free installation and removal - Really sweet matching headset spacers available separately S.H.I.S.: - ZS41/28.6 | EC44/40 HEAD TUBE: - Top 44mm - Bottom 44mm STACK HEIGHT: - Top 8mm - Bottom 12mm STEERER SIZE: - Top 1 1/8” (28.6mm) - Bottom 1 1/8” (30mm)* - Bottom 1 1/4” (33mm)* - Bottom 1 1/2” (40mm) *with adapter crown race WEIGHT: - 106 grams

Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.

Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.9 Fat Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough terrain, so you experience an astoundingly plush ride with precise handling. They've accomplished this by using a delightfully stiff and compliant UD carbon fiber construction, a tapered steerer, and a 15 x 150mm thru-axle. It all results in an enhanced riding experience and adds up to performance that you can count on. - Post style brake mount - DT RWS Axle included - UD full carbon construction - Axle to Crown Length: 480mm - Brake Mount: Post Mount 160mm - Crown Race: 40 - Front Axle: 15 x 150mm - Material: Carbon - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: 1-1/8 – 1-1/2-inch tapered - Weight: 750 grams - Wheel Size: 26-inch

The No.9 35.0 Mountain Carbon Handlebar is designed and built for the most extreme trail and all-mountain riding. The oversized stem clamp adds to front-end stiffness for precise input, while the carbon construction provides vibration damping in a lightweight and durable package. - Unidirectional carbon fiber construction - 35mm stem clamp - 8 degrees of backsweep with 5 degrees of upsweep - Trimmable ends, made easy with graphic markings - Rated to ASTM Condition 4 for extreme off-road riding

Ergonomnic and elegant, the Whisky 438 Aluminum Scully Bar brings much needed relief for long hours in the saddle – without compromising reach or stem length. The 23-degree backsweep and 5-degree upsweep create an easy, natural handling position, leaving little room for tricep fatigue. The generous clamping space and clean, lightweight design means this ISO tested bar tastes all types of terrain. For a custom feel, the Scully Bar comes in two trimmable widths (820mm and 780mm) to perfect your grip length and enhance overall performance. 

For the ultimate in comfort and control over long distances, our all-carbon Scully Bar pairs a 5-degree upsweep with a 23-degree backsweep. Featuring an elegant forward bend before sweeping back again, its easy, natural hand position inspires confidence. It’s also blissfully wide, offering loads of real estate up top for mounting lights, bags, bikepacking gear, and more. ISO tested for harsh terrain, the Scully Bar is a sleek and stiff upgrade for paved commutes and whatever off-road riding you’re into — gravel, XC, singletrack, and beyond. Offered with 20mm of rise in two trimmable widths, the ideal fit is out there.

The Whisky compression plug for carbon forks is reliable and easy to use. The simple design offers excellent support and function, works great with Whisky carbon forks, and may fit other manufacturer's forks as well.

You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be. - Spacers are sold individually

Bottom bracket cup and spindle spacers. Use for adjusting chainline or eliminating bearing play in cranks with 24mm spindles

Shims for fitting 25.4mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 25.4mm - Length: 48mm - Machined Aluminum - Anodized Black

Threaded ABEC-3 BB for 386EVO frames (86.5mm shell width, 46mm shell ID). Machined cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: BB386EVO - Bottom Bracket Shell Width (mm): 86.5mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 126g - Packaged for retail display - Will accept 24mm and 24/22mm cranksets using Wheels Mfg. 386EVO BB / Crank Adapters

Grade 300 retainer bearings for headset and bottom bracket service - 5/32" ball diameter - 22 balls per retainer - Grade 300 Bearings - 10 Retainers/Bag

BB30 service kit includes 2 Enduro 6806 ABEC-3 sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems - Enduro ABEC-3 bearings

The Wheels Mfg BB30 Outboard bottom bracket will give you all of the same benefits as their other Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in BB30 frames without the need for adapters. - Bearings: Enduro Angular Contact - Color: Red - Bottom Bracket/Frame Interface: BB30, Specialized Alloy OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 42mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 127g

Wheels Mfg BB86/92 thread together bottom bracket for use with 24mm spindle diameter cranksets. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Note: Use only bottom bracket tools compatible with 16-notch, 48.5mm outer diameter cups. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: BB86, BB92 - Bottom Bracket Shell Width (mm): 86mm, 92mm, 89.5mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 106g

Wheels Mfg BB86/92 thread together bottom bracket for use with 24mm spindle diameter cranksets. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Note: Use only bottom bracket tools compatible with 16-notch, 48.5mm outer diameter cups. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: BB86, BB92 - Bottom Bracket Shell Width (mm): 86mm, 92mm, 89.5mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 106g

Wheels Manufacturing Clear Chainstay Protector w/ Alcohol Prep Pad keeps your frame's paint looking good and helps quiet any chain slap on the chainstay.

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt Note: Same hanger as Wheels Mfg DROPOUT-6.

- Machined aluminum replacement derailleur hangers to fit a wide variety of frames - Please visit https://wheelsmfg.com/derailleur-hanger-tech-help for more updated info - Made in USA + Pivot Vault 2020+; E-Vault 2021+

Enduro 24X37 ABEC-3 Sealed Bearing. Replacement bearing for Wheels Mfg bottom brackets for 24mm (Shimano) and 22mm/24mm (SRAM GXP) spindle cranks. ABEC-3 bearings are the most economical bearing Enduro offers but are extremely tough and durable. Grade 10 chromium steel balls are within 10/1,000,000" round. These are twice as round as the industry standard. 52100 high carbon chromium alloy races go through a vacuum de-gassing process resulting in the purest chromium alloy steel, hardened to R-62. Keeping everything together are riveted steel retainers and sealed with LLB type seals. - Dimensions: OD: 37mm / ID: 24mm / Width: 7mm - ABEC-3 - Grade 10, 5/32" chromium steel balls - Enduro Part # BB MR 2437 LLB-BLK - Imported - Sold in a bag of 2

By popular demand, Wheels Mfg. added this PF30 Outboard Bearing BB for use with 29mm spindle SRAM DUB cranksets when used in PF30 frames. The two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life and simplifying maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width: 61mm – 73mm (Specialized Carbon OSBB with 61mm shell width will need additional 3.5mm cup spacers, sold separately) - Bottom Bracket Shell I.D.: 46mm - Over Bearing Width: 89mm in 68mm wide shell (dimensions include supplied silicone dust shields) - Crank Spindle Diameter: 29mm - Tool Pattern: 48.5mm x 16 notch - Weight: 156g

PF30 Threaded bottom bracket features two machined aluminum cups that thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Directly replaces all OEM PF30 bottom brackets. Note: Use only bottom bracket tools compatible with 16-notch, 48.5mm outer diameter cups. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB, BBRight™ Press Fit - Bottom Bracket Shell Width (mm): 61mm to 79mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 114g

T47 threaded BB cups for running 30mm spindle cranks in T47 frames. Cups have internal bearings and are typically used in BB shells with widths wider than 73mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, or a titanium-compatible anti-seize compound in titanium BB shells. - Bearings: Enduro Angular Contact - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width: 68mm – 132mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Over Bearing Width: 91.7mm in 86.5mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 48.5mm x 16-notch

T47 threaded BB cups for T47 frames and 24.00mm spindle diameter cranks. Cups have outboard bearings and are typically used in BB shells with widths from 68mm to 100mm. Machined aluminum cups thread together directly into a T47 BB shell. Bearings are easily serviced or replaced. Includes sleeve to fit between cups for added protection from dirt and grime, and also keeps your internal wires and hoses from rubbing on the crank spindle. T47 BB cups are similar to standard BSA threaded cups in that the drive side cup is left-hand thread and the non-drive side cup is right-hand thread. Use a quality grease when installing in steel or aluminum BB shells, and an anti-seize compound compatible with titanium BB shells. Bottom Bracket Includes: - BB Cups with bearings - 2x Silicone dust seals - 2x 0.5mm crank spindle spacers - 2x 1.0mm crank spindle spacers Specification: - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: T47 - Bottom Bracket Shell Width (mm): 68mm - 100mm - Bottom Bracket Shell I.D.: 47x1.0mm Threaded - Crank Spindle Diameter: 24.00mm - Over Bearing Width: 90.8mm in 68mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Tool Pattern: 44mm x 16-notch - Weight: 150g