Forks

The Wayfinder Carbon Fork represents our vision for the ultimate lightweight and versatile adventure fork. It's the perfect upgrade for riders who want to take their cycling further. It'll fit a ton of existing bikes, works great on modern oversize head tubes, and has all the features that you need for gravel, exploration, and bike packing applications: three pack mounts, internal dynamo routing, internal brake cable routing, real deal fender mounts, and massive tire clearance. At 470g with an uncut steerer, it's among the lightest fully featured forks on the market and was designed with rider comfort and durability in mind. The fork legs were specifically engineered to soak up bumps and isolate the rider from road chatter allowing you to go longer and in greater comfort without sacrificing strength or durability. We built it to be the go-to solution for riders who need a fork that can do more, so it'll fit great on bikes that have a standard 1 1/8" head tube, EC34/44 head tube or a 44mm head tube. Will work wonderfully to add features and lightness to an older cross or gravel bike, All-City Space Horse, Surly Straggler, Surly Midnight Special, etc. Features - Three Pack Mounts - Flat Mount Brake - Thru Axle - 12x100mm - Internal Brake Routing - Internal Dynamo Routing - Fender Mounts - Fully Threaded Center Mount Specs - Fork Weight: 470g with uncut steerer - Tire Clearance: 700c X 2.1" or 27.5" X 2.3" - Axle to Crown - 398mm - Rake - 49mm - Steerer - 350mm length, 1 1/8" straight - Axle - 130mm length 12 x 1.5 Capacity - Three Pack Mount - 6 lbs per side - Rack - 20 lbs Recommended Maximum Rider Weight 240lbs

The new Waypoint Carbon Fork is a tapered version of our lightweight and versatile adventure fork. It's the perfect upgrade for riders who want to take their cycling further. It's the new companion to our Earth Ship frames and has the features that you need for gravel, exploration, and bike packing applications: three pack mounts, internal dynamo routing, internal brake cable routing, fender mounts, and massive tire clearance. At 478g with an uncut steerer, it's among the lightest fully featured forks on the market and was designed with rider comfort and durability in mind. The fork legs were specifically engineered to soak up bumps and isolate the rider from road chatter, allowing you to go longer and in greater comfort, without sacrificing strength or durability. The Waypoint was designed for bikes with an EC34/44 or 44mm headtube that take a tapered steerer. If you need a fork for a standard straight 1 1/8" steerer or EC34 headtube, the original Wayfinder is the one you want. Will work wonderfully to add features and lightness to an older cross or gravel bike, All-City Cosmic Stallion, Surly Midnight Special, etc. Features Three Pack Mounts Flat Mount Brake Thru Axle - 12x100mm Internal Brake Routing Internal Dynamo Routing Fender Mounts Fully Threaded Center Mount Specs Fork Weight: 478g with uncut steerer Tire Clearance: 700c X 2.1" or 27.5" X 2.3" Axle to Crown - 398mm Rake - 49mm Steerer - 350mm length, Taper 1.125" to 1.5" Spacing - 100mm Axle Length - 130mm 12 x 1.5 Compatible Rotor Size - 140mm and 160mm Capacity Three Pack Mount - 6 lbs per side Rack - 20 lbs Recommended Maximum Rider Weight 240lbs

The Firestarter carbon fork is made from high-modulus carbon fiber, built for all-terrain riding. Three-Pack mounts on each leg give you room for water or Anything Cages, and mid-blade mounts accommodate racks for panniers. This fork is light, tough, and ultra-versatile with the capacity to fit a wide range of tire sizes. - High modulus carbon fiber construction - Tapered 1-1/8" to 1-1/2" steerer tube - 160mm minimum rotor size; 180mm maximum rotor size - Mid-blade mounts for low rider racks - Compatible with wheel sizes: 27.5+, 29", 29+, 700c - Dual sets of Three-Pack mounts on each fork leg for Anything Cages or water bottles - BOOST 110 x 15mm thru axle included - Front Axle Size: 15 x 135L, TP=1.5, TL=10 - Internal routing for 110 BOOST dynamo hubs

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

200 Hour Service Kit for the repair and maintenance of RockShox forks. Performing yearly maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. - RockShox recommended 200hr/1 Year service kit for 200 Hours/1 Year, SID (35mm) Base / Select / Select+ / Ultimate (2021-2023) Generation-C suspension forks - Compatible with RockShox FS-SID-SEL-C1, FS-SID-ULT-C1

RockShox Full Service Kits - Includes dust wipers - Bushings not included

Ultra-versatile, super capable, lightweight on the scales, heavy on the attitude—this is Pike. Not afraid of the rooty chutes. Unintimidated by the calf-crushing climbs. We’ve updated our trail-capable legend with the new Charger 3.1 RC2 damper. Along with vibration-killing ButterCups, this damper offers better traction, comfort, and control. With more tunable range, Charger 3.1 enables riders to set up the perfect suspension action for their preferences. A fork designed to level up your trail game. Experience the legend. FEATURES - NEW To meet the demands of the world’s best riders, Charger 3.1 is a brilliant evolution of our proven damper platform. With increased damping range and High Speed Compression, Low Speed Compression, and Low Speed Rebound adjustments, Charger 3.1 smooths out the roughest trails. - NEW Charger 3.1 RC2’s adjustment range is broader—with less compression damping in the LSC open position and additional support in the HSC closed position, you get the traction, control, and comfort you need to charge dicey lines all day. - NEW Ever on the quest to eliminate friction, a new bushing package further reduces friction with an updated process at the factory level to give riders a better feel right out of the box. - ButterCups block 20% of high-frequency “trail chatter”. Limiting these vibrations massively reduces hand and arm fatigue leaving you feeling fresh with more control. - DebonAir+ air spring is built to strike the perfect balance of what riders really want: a butter-like small bump feel, increased air volume to add support throughout the travel, and higher overall ride height for more confidence when things get steep. - Maxima Plush Dynamic Suspension Lube reduces friction, lasts longer, and enhances suspension performance ride after ride. - Bolt-in torque cap adapters now included for use with standard hub end caps. - Lightweight machined and anodized crown for premium looks and durability. - Available in the Signature colorway Gloss Silver or Ultimate High Gloss Black. - Ultra-low friction SKF wiper seals provide long lasting fork performance and improve overall suspension feel. - Short fender compatibility. (RockShox fender included)

Rebuild kits for Fox X2 rear suspension. - 2019 FLOAT X2 Spring and Damper Rebuild Kit

Fox Float NA Air Spring Rebuild Kit.

Fox Dust Wiper Kit is standard equipment on Fox Forks and gives them a smooth feel.

34 Air Shaft Assembly

34 Air Shaft Assembly

The 34 Step-Cast Performance is the choice for riders who want an all-round fork that performs in a vast range of applications: lightweight for climbs and highly capable for demanding terrain with enough travel to instill confidence when the trail gets rough. Weight savings are attributed to external lower casting steps, hollow lower section, and shortened shaft lengths. - Step-Cast chassis - Black anodized upper tubes - FIT GRIP damper and FLOAT EVOL air spring - Dedicated air spring and damper tune are specific for this travel range, with a lighter tune at mid and higher velocities - Performance Series black-on-black graphics package SPECIFICATIONS - Positive Spring: Air - Wheel Size: 29" , 27.5+ - Brake Type: Post Mount 160 - Crown Race: 40 - External Adjustments: Low Speed Compression Damping , Rebound Damping - Negative Spring: Air - Stanchion Diameter: 34 - Steerer Type: Tapered - Maximum Tire Width: 66 - Offset: 44 - Color: Matte Black - Steerer Tube Length (mm): 264 - Front Axle: 15mm Thru x 110mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Travel (mm): 120 - Axle to Crown Length: 530 - Lockout Switch: Crown

Fox Dust Wiper Kit is standard equipment on Fox Forks and give them a smooth feel.

Fox Dust Wiper Kit is standard equipment on Fox Forks and gives them a smooth feel.

Fox Dust Wiper Kit is standard equipment on Fox Forks and give them a smooth feel.

Fox Float NA Air Spring Rebuild Kit.

Fox Float NA Air Spring Rebuild Kit.

9-Piece Stainless Steel Mounting Hardware Kit for Fox rear shocks. Specifications: - Frame Mount Width: 30 - Bolt Mount Diameter: 10

Seal kits for Fox suspension repair and rebuild.

Riding rigid isn’t for everyone, but for those who value functional simplicity, the updated ENVE Mountain Fork delivers. BOOST (15X110MM) - Material: Carbon - Accessory Mounts: Yes - Weight: 719g with Fender, 676g (w/ clasps) - Travel Correction: 120mm (Compatible with frames designed around 100mm-140mm Travel Forks) - Steerer Tube Length: 300mm - Rake: Adjustable – 44mm, 52mm - Axle To Crown: 490mm – 44mm Rake Position; 492mm – 52mm Rake Position - Brake: Disc - Brake Mount: Post Mount - Axle Compatibility: 15 x 110mm - Max Rotor Size: 180mm - Max Tire Clearance: 29 x 3.0” with Fender - Crown Race Diameter: 1.5” - Torque Spec: Steerer Tube: 5.5 Nm - Torque Spec: Axle: 8 Nm

Our lugged and brazed Cross-Check fork has room for 700c x 45mm tires and fenders. It’s made from 4130 CroMoly steel and features fender eyelets at the dropouts, cantilever brake pivots, and now has through-leg mid-blade eyelets for mounting a rack. The eyelets are threaded 5 x 1mm and located 165mm up from the axle. Finish is powdercoat. - Axle-to-crown: 400mm - Offset: 44mm - Steerer: 300mm - Tire Clearance: 700c x 45mm - Weight: 2.3 lb (1.0kg) uncut

The Dinner Fork is non-suspension corrected and accommodates 26", 27.5", and 29" wheel sizes. If you want to run fenders alongside an 8 or 24-Pack style rack, this fork can do that. Hell, it relishes it. To give you even more options for carrying miscellaneous items, we put a set of 3-pack mounts on each fork blade, too. Run it on your current Surly for a thought-provoking new experience, or throw it on a different rig to unlock some off-road capabilities. A truly versatile piece of cutlery, the Dinner Fork features 100% Surly Chromoly steel construction, 51mm IS disc brake mounts, and clearance for tires up to 26 x 3.0", 27.5 x 2.8", or 29 x 2.2". Specifications: - Axle-to-crown: 420mm - Offset: 50mm - Steerer: 350mm, 1-1/8" straight - Tire Clearance: 26 x 3.0" (without fenders); 27.5 x 2.8" (with or without fenders); or 29 x 2.2" (without fenders) - Weight: 2.75 lb.

Like its QR cousin, the Disc Trucker Thru-Axle Fork is designed to mount racks and fenders and haul your worldly possessions. It's also got modern touches like dynamo routing, compatibility with flat-mount disc brakes, and three-pack mounts on both fork blades to satisfy your deepest cargo desires. Captured 12mm thru-axles make tool-free removal and installation possible. Offered in 26" and 700c wheel sizes, the Thru-Axle fork clears 26 x 2.1" or 700c x 47mm tires. With a 1-1/8" steerer, it's powder-coated and constructed using the same Chromoly steel as all our other frames and forks. Why? Because we swore a blood oath to steel and we intend to keep it. Note: The Disc Trucker TA Fork is designed to pair best with second-generation Disc Trucker models—those first released in 2020. Defy this guidance at your own peril. 26 Inch - Axle-to-crown: 376mm - Offset: 45mm - Steerer: 42–54cm frames = 300mm, 1-1/8" straight - 56–62cm frames = 400mm, 1-1/8" straight - Tire Clearance: 26 x 2.1" (with or without fenders) 700c - Axle-to-crown: 390mm - Offset: 45mm - Steerer: 56–64cm frames = 350mm, 1-1/8" straight - Tire Clearance: 700c x 47mm (with or without fenders)

The Ice Cream Truck fork is made from 4130 CroMoly steel and is designed for Surly's Ice Cream Truck frame. It's ready for trail use and features butted and tapered blades with thru-axle dropouts spaced at 150mm. It has barrel bosses at the dropouts and crown, mid-blade thru-blade eyelets and triple bottle bosses on both fork legs. That's a lot of bosses. 51mm I.S. mounts use front disc spacing. - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm, 1-1/8-inch straight - Tire Clearance: 26 x 5.25-inch

Designed for Surly's Krampus frame, this fork has quick-release dropouts spaced at 100mm and clearance for a 3-inch tire on a 50mm rim. To accommodate such big tires it's got a longer axle-to-crown measurement than the Ogre or Karate Monkey forks, making it a perfect rigid fork option for lots of 29ers out there. The Krampus fork's blades were designed and manufactured specifically to play well with the unique forces such a long fork with big tires will encounter, and the steer tube is standard 1-1/8-inch threadless. It has line guides for a disc brake line as well as thru-blade eyelets and Three-Pack bosses on both fork legs. - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm - Tire Clearance: 29 x 3" - Weight: 1133g uncut

Classic 100% chromoly construction and engineered for modern accessories, that's Surly's Long Haul Trucker Disc Fork. Its beautiful curved blades are brazed to a lovely and tough investment-cast crown and dropouts. There are disc-brake mounts and eyelets for fenders and mounts for a standard or low-rider rack. Plus, it boasts a tough powdercoat finish that's tres chic. - 100% CroMoly steel construction, curved blades, powdercoated - Extensive mounting options with threaded eyelets in four locations: double eyelet dropouts, mid-blade, and a pair drilled into the fork crown - 51mm IS disc brake mount - 26" has clearance for a 2.1" tire

Classic 100% chromoly construction and engineered for modern accessories, that's Surly's Long Haul Trucker Disc Fork. Its beautiful curved blades are brazed to a lovely and tough investment-cast crown and dropouts. There are disc-brake mounts and eyelets for fenders and mounts for a standard or low-rider rack. Plus, it boasts a tough powdercoat finish that's tres chic. - 100% CroMoly steel construction, curved blades, powdercoated - Extensive mounting options with threaded eyelets in four locations: double eyelet dropouts, mid-blade, and a pair drilled into the fork crown - 51mm IS disc brake mount - 700c has clearance for a 45mm tire

The Long Haul Trucker fork is designed to mount racks and fenders and to haul stuff. The fork’s new crown provides ample clearance for 26 x 2.1 tires and sports threaded eyelets in four locations (dual dropout, midblade and fork crown) to provide more options for mounting stuff, from racks to whatever. Options galore. Curved blades, CroMoly steel. 1-1/8-inch threadless steer tube. - Axle-to-crown: 26" = 376mm - Offset: 45mm - Steerer: 26" (42–54cm frames) = 300mm; 26" (56–62cm frames) = 400mm - Tire Clearance: 26 x 2.1" - Weight: 26" = 2.1 lb (0.97kg) uncut