Handlebars

Wider than the Clarence, with more room for accessories in the middle - 6061-T6 aluminum with 135mm straight section at the center - Forward bend from clamp area negates the need to change stems to make up for the grip area sweep

- 7050 ProTaper alloy optimizes strength while reducing weight - Cut mark graphics aid in customizing fit

- Internal routing for Shimano STEPS switch units and tested to the very demanding Zedler E-MTB Advanced Plus standard and the international DH standard (ASTM Cat. 5 Downhill) - Patented oval bar shape provides increased vertical compliance - Profile minimizes the 35mm clamping area and quickly changes to a flattened oval shape in the transition zone and then to the standard 22.2mm clamp for shifter/brakes/grips - Strong and lightweight handlebar minimizes arm pump and vibration while maximizing steering response - Third party online sales are strictly prohibited by manufacturer

- The original Chromag bar - Used from XC to DH, the OSX is Chromag's most versatile option - 31.8mm clamp Specs: - Rise: 25mm - Handlebar Width: 800mm - Stem Clamp Diameter: 31.8mm - Handlebar Material: Aluminum - Upsweep: 5 degrees - Backsweep: 8 degrees

- Double-butted 6061-T6 aluminum construction - RHM Shallow-ergonomic profile with more hand positions than traditional anatomic shapes - Black anodized - Drop/reach are measured center-to-center, width is measured outside-to-outside - 280g (42cm)

- 6061-T6 polished aluminum finish in black or silver - Grip Area Diameter: 22.2mm - The internal diameter of the ends are machined to fit some bar end shifters and reverse brake levers - Bends forward 22-degrees before bending backwards - A design collaboration with Dream Cycle Vancouver

Drop bar designed with off road use in mind. Similar to the Junebug but with a 26.0 clamp and a narrower version available. - Polished 6061 T6 aluminum - Width is measured center-to-center at the bar ends - Grip area has a slight flare - Bar end shifter compatible

Wider than Turbine but still sporting the agressive sweep design putting you in the perfect riding position, these bars come in a variety of rises to allow you to fine tune your cockpit and dial in your setup. Tried and tested 7075 aluminum gives you the confidence for agressive all-mountain riding and 35mm technology for fantastic overall weight/strength ratio. Your six inch travel bike will thank you. - Manufactured from cold drawn, 7075 Aluminium - 35 optimized triple butted design - Turned up to Rally control with 800mm width - Rise sizes to for every build and preference 10/20/35mm - Stealth black on black decals to match every frame color

- Drop + Riser="Driser"\n- Stylish 20mm rise provides a higher riding position without the need for stem spacers - Profiled top tube with semi-aero ‚ palm friendly‚ design is ergonomically comfortable - An additional 16 degree flare in the drop area adds 93mm of extra ergonomic enhanced control to the overall width - A great design for CX and Gravel racing, as well as a neat option for touring or commuting - 6061 T6 butted, heat treated aluminum alloy - Durable shot peened and anodized finish - 23.8mm tube with 31.8mm stem clamp bulge - 16 degree flare angle - 75mm reach, 125mm drop (effective drop 105mm) - Widths are measured at the lever clamp area (flare adds 93mm overall) - Control cable groove indents - Black anodized with laser logos

- Provides extra hand positions for gravel, touring and adventure riding - Bar top features an ergo profile for comfort\n- Moderate 25 degree flare angle - Lightweight 6061-T6 alloy construction - 480g (42cm)

Double butted 7075-T6 aluminum bar, designed and tested by Reverse Team Rider Lukas Knopf - Inscribed with his mantra - life is short - stunt it - Includes cutting lines and stem alignment guide marks

E-Element Riser Bar - 7050-T6 aluminum bar with special Element Butting Technology for E-Bike use - Lab tested by EFBE Pruftechnik in Germany, certified for safe use on E-Bikes under the toughest conditions - Includes cutting lines and stem alignment guide marks

- World Cup DH proven double butted 7075-T6 aluminum bar - Designed with Downhill as well as All Mountain and Enduro riding in mind - 790mm width provides confidence for even the toughest trails

Atmos is our new premium offering for cross-country performance. The Atmos carbon flat bar is an updated, more modern cross-country bar with a 760mm width and a 9° backsweep. The bar can be trimmed by up to 40mm per side allowing you to customize the bar to your preferred width. This is the lightest bar in the Atmos range. - Wide to start and trimmable by 40mm each side - Specialty tuned carbon laminate to absorb noise while maintaining stiffness - 190g at full width SPECIFICATIONS - Type: Flat - Application: XC - Clamp Diameter: 31.8mm - Width: 760mm - Backsweep (degrees): 9

The Service Course SL-80 provides comfortable and efficient positions on the bar tops, brake hoods, or down in the drops. The bar allows a neutral wrist position on the drops and a flat brake-hood transition. This minimizes the need for up-rotated bars. Drops are angled outward by 4 degrees, reducing wrist strain. Named after its 80mm reach to bring the hoods and control levers back where you want them. The ergonomic 125mm drop places the angled drop position where you can easily reach it while maintaining a neutral wrist angle. The SL-80's rounded bar top is clip-on compatible. Forged from lightweight 7075 aluminum. - Distinctive Zipp cosmetics - 7050 Aluminum - 80mm reach/125mm drop designed to fit a large number of riders - Clip-on compatible - Lifetime warranty

Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it? - Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform - Requires 35mm bar clamp diameter stem - Full 800mm width that can be trimmed down to a minimum 750mm - 8 degree rearward sweep, 5 degree upward sweep

This classic touring handlebar is great for bicycle restorations or for adding a touch of traditional class to any bike - 1"(25.4mm) clamp, 2.5" rise, 23.75" wide - Handmade in Maysville, Kentucky

WCS VentureMax Drop Handlebar - Evo sweep of 6 degrees - 24 degrees of flare - Ergo Bio-bend - Compatible with all hood types

Whisky's No.9 Riser Bar features a 25mm rise and a 5-degree upsweep to offer a slightly more upright riding position that increases control and comfort. It’s wide, sleek, and tested to the highest standards to deliver a ride you can trust mile after mile. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.

World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more. - Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy - Material: MGR Super Six Alloy - Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm) - Diameter: 31.8mm - Rise: 5mm / 15mm / 30mm / 50mm - Length: 800mm (Adjustable to 740mm) - Geometry: 4° up x 8° back - Finish: Shotpeen anodized, decal logos

A purpose-built carbon drop bar specifically designed to improve the off-road drop bar ride experience. Whether it’s descending the steep and technical grades at the Crusher in the Tushar, finding more comfortable hand positions during the 200-mile slog across Kansas at the Dirty Kanza, or adventure riding in your own backyard, this full carbon handlebar provides performance-driven gravel riders with the options, comfort, and control they need to grind gravel with confidence.

- DH and Freeride, ultra-wide, 820mm wide handlebar - Big and burly 35mm barclamp with increased strength and stiffness compared to conventional 35mm alloy bars - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Shot-peening and anodizing enhances fatigue life even further - Weight optimized and adjustable to 760mm Features: - Key Technologies: Vibrocore, Dual XGT, CNC Bending, MGR, Big-Taper (105mm) design - Material: Zirconium Doped 7-Series Alloy - Weight: ±300g - Diameter: 35mm - Rise: 25mm - Length: 820mm - Geometry: 5° up x 8° back - Finish: Shot peen anodized, decal logos

An updated version of a Ritchey handlebar bend now in a timeless high-polish silver finish. The NeoClassic features the traditional round drops that many Tour de France and Classics champions prefer with a shorter reach and shallower drop. - Material: double-butted 6061 alloy - Bend style: traditional - Top style: round - Width: 400, 420, 440mm - Drop: 128mm - Reach: 73mm - Drop flare: 0° - Flare out: 0° - Backsweep: 0° - Accessory mount diameter: 31.8mm - Compatible with Shimano EW-RS910 junction box - Clip-on compatibility: yes - Other features: drilled at bar end for Shimano Di2 EW-RS910 junction box routing, C260 compatible - Weight: 300g (420mm)

Ergonomnic and elegant, the Whisky 438 Aluminum Scully Bar brings much needed relief for long hours in the saddle – without compromising reach or stem length. The 23-degree backsweep and 5-degree upsweep create an easy, natural handling position, leaving little room for tricep fatigue. The generous clamping space and clean, lightweight design means this ISO tested bar tastes all types of terrain. For a custom feel, the Scully Bar comes in two trimmable widths (820mm and 780mm) to perfect your grip length and enhance overall performance. 

The SES AR Handlebar reveals our vision for the future of road handlebar shaping and design. Purpose-built for the modern road rider, the SES AR handlebar features compound flared drops for confident handling, aerodynamic shaping with internal/external routing options for clean airflow and aesthetics, and a carbon laminate that has been tuned for responsive handling without sacrificing comfort. - Application: Road Race, All-Road, Gravel, Cyclocross - Sizes: 38cm, 40cm, 42cm, 44cm, 46cm - Weights: 243g, 245g, 248g, 262g, 280g - Full Integrated Internal or External Routing - Lifetime Incident Protection and 5 Year Factory Warranty

The standard for which Ritchey performance is based on. Race-worthy components priced for the casual cyclist. - Double butted 6061 alloy construction - Gentle sweep for ergonomic performance - Bar Clamp Diameter: 31.8mm - Rise: 5mm - Weight: 276g

The No.9 24F carbon drop bar is designed for comfort and control in challenging situations. Specifically aimed at long-distance touring, gravel, and off-road pursuits, the 24-degree flare offers huge control from the drops. The carbon construction provides a light, stable platform that reduces vibration and adds comfort, plus a new carbon layup that better accommodates clamping forces of modern controls. This thoroughly modern drop bar is the perfect match to your off-road tourer, monster cross bike, or get-rad CX rig. The 24F’s sleek design offers a seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs.

-Show us your ear to ear Grin – 'To Smile' Bar is back -Go further. With this in mind, To Smile Bar was created for cyclists who are seekers and wish to venture off the beaten path. A long-time SimWorks staple bar has been resurrected with a new specification. -This unique handlebar has a shallow curved drop shape, mirrored from our original version- whose shape had been carefully thought out to hit a sweet spot for cyclists who frequently find themselves in the lower grip position. To Smile is designed with the modern gravel & all-terrain scene in the front of our minds. The details have been updated, with the center clamp expanding to 31.8mm, making it compatible with more modern stem standards and offering greater peace of mind while negotiating more challenging terrain. -To Smile is available in one size at 560mm wide bar center-to-center- making it a suitable choice not only for drop-bar MTBs, but also for gravel rigs, monster cross machines, or touring bikes with wider tires. We encourage you to use your creativity to assemble a memorable bike and grab the bottom handlebar. It's sure to put a smile on your face. *The SimWorks by NITTO drop bar series includes the All Star Decal Kit 2 as an accessory. Please enjoy applying it to your handlebars or elsewhere.

The No.9 35.0 Mountain Carbon Handlebar is designed and built for the most extreme trail and all-mountain riding. The oversized stem clamp adds to front-end stiffness for precise input, while the carbon construction provides vibration damping in a lightweight and durable package. - Unidirectional carbon fiber construction - 35mm stem clamp - 8 degrees of backsweep with 5 degrees of upsweep - Trimmable ends, made easy with graphic markings - Rated to ASTM Condition 4 for extreme off-road riding

Bored hands make bad rides, mix it up with some drop bars so you have positions aplenty! Duck into the drops and out of the wind if you're feeling aggro, relax and ride the tops if you're just taking a cruise or, add some hoods, and get out over the front wheel. The choice is yours. - Classic style drop bars perfect for getting a more aggressive riding posture on your fixie or road bike - Designed by us and perfect for any 25.4mm clamp, these puppies taper to 22.2mm for mounting all your lights, computers, etc... Race on. - 40cm/400mm width with a 138mm drop

Thomson MTB Aluminum Handlebar 800mm 35mm Rise 9degree back 5 degree up 35.0 clamp. - Produced from 7050 alloy then butted and tapered for optimal fatigue life - Produced with an advanced hydraulic forming press to ensure consistent wall thickness and exact tolerances - Bar Clamp Diameter: 35.0mm

- 1"(25.4mm) clamp, 10.4" Rise, 23.5" Width - Handmade in Maysville, Kentucky

These 42cm alloy bull horn handlebars are a thing of beauty. Designed by Pure Fix Cycles in California. Ideal for getting yourself out over the front wheel and into a more aggressive riding position. Specs: - 17" Wide - 2.5" High - These bars have an ISO standard 25.4mm stem clamp diameter and 22.2mm brake clamp diameter

The M5 bar is designed with an offset grip position and 31.8mm clamping surface, the bar can be mounted with a positive or negative rise of 5mm. This versatile bar combines a familiar 9degree sweep with the greater width and strength that's demanded by today's more aggressive XC riders. - Includes decal sheet to color match with ENVE wheel decals

A traditional looking 4-piece bar that uses larger radius bends, thicker walled, butted tubing and a traditional 7/8" crossbar for strength and durability. - Multi-Butted, traditional 7/8" crossbar for strength - Large radius bends for greater durability - Welded end caps to reduce flex - Post-weld heat-treated for added strength

The 10-4 bar features large radius bends, thicker walled butted tubing and a traditional 7/8" crossbar. - 41-Thermal processed 4130 chromoly - Multi-butted

When designing the all-new Ridgeline aluminum trail handlebar, our goal was to create the perfect trail bar that disappears beneath you while encouraging you to chase adventure and seek out new experiences wherever possible. We precisely targeted lower rise options at 15mm and 25mm with a stable width of 800mm for a more efficient and aggressive position on the bike. To do this, we took an oversized 35mm bore platform and dispersed the load over an 800mm width. It was critical for us to keep the weight down without sacrificing strength. This is where our unique proprietary Gradient Butting Technology shines, allowing us to remove excess material in areas of less stress and fatigue that can cause the stiff feeling commonly felt with other 35mm handlebars on the market. We can then add material to areas of greater stress and fatigue to increase the long-term strength and durability. This gives you, the rider, more confidence to chase new experiences and forget about the gear beneath you. Our goal is for you to become one with the bike and never let up on chasing your new adventure! - Oversized 35mm Bore Aluminum Handlebar - Designed for Enduro / All Mountain / Trail - Incredibly detailed two-tone bead blasted and polished ano finish - Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology - 800mm wide - 9 degree bend x 5 degree upsweep - Flex and deflection characteristics designed to match the Skyline handlebar - Features measured cut marks and center alignment detail - Black ano finish with colored graphics - Weight: 303 grams

Rock-solid in the park or on the trail, the Spank Spoon 800 handlebar gets a refresh for 2020. With new, fresh graphics, the Spoon bar is now 800mm wide for ultimate control. In addition, you can dial in your fit with the ability to cut it down to 740mm for a wide variety of uses. Spank Spoon: the best-priced handlebar on the market without compromise! - Cost-effective upgrade to your 31.8mm cockpit without sacrificing quality - Freeride inspired all-mountain geometry makes the bar extremely versatile - Shot-peening and anodizing enhances fatigue life - Dial your fit—adjustable to 740mm - Recommended for: ASTM 5, All mountain, trail, free ride, DH, E-Bike

The bar offers the same compact reach and drop dimensions as the Service Course SL-70 but adds a flattened top section for a natural ergonomic grip on the bar tops and a revised ramp angle for proper fit. The SL-70 Ergo's specially tuned drop shape creates comfortable hand positions with the short reach to control levers vital for race situations. The bar's 128mm drop help puts the rider low and in control without compromising comfort. Whether it's a rider with smaller hands or a bigger rider getting aero by pairing this bar with a long stem, this bar helps put just about any cyclists into their optimal position. - Distinctive Zipp cosmetics - 7050 aluminum for light weight and durability - 70mm reach and 128mm drop for a short-low position - Flattened top shape with 3° backsweep for comfort - Clip-on Compatible (40, 42, 44cm sizes only) - Lifetime warranty

Zipp's Vuka Shift AXS 90 is more than an aero extension; it's a complete shifting system. Think of it as a supremely efficient solution to house the brains of your SRAM RED or Force eTap AXS time trial or triathlon bike. The Vuka Shift AXS 90 cleanly houses your aerobar extensions, shift-control, and head unit in one neat and clean package. This approach solves an emerging problem of the age of electronic shifting. The time for system integration is now—with this seamless solution. The extensions themselves feature the pro-proven Vuka Evo shape with a 90mm rise. The Vuka Shift AXS 90 is compatible with more than 90 percent of the integrated aerobar systems currently on the market. - AXS Integrated Aerobar shifting system - Length is trimmable, 10mm at front and 90mm at rear - Integrated Garmin/Wahoo/Bryton computer mount - Ships with SRAM Clics extension-end shifters and Blips shifting buttons for brake-lever position shifting - More than an aero extension, this is an integrated shifting system for the modern triathlon/TT bike - Cleans up your aero cockpit for simplicity and optimized aero efficiency

Light weight, comfort, and strength: the new SL-70 Ergo is the ultimate handlebar for long days in the saddle. The SL-70 Ergo combines the flat bar top shape of the beloved Contour SL bar with numerous modern features sought after by riders and pro bike fitters. The SL-70 Ergo sports a 70mm reach and 128mm drop. The short 70mm reach has been a popular choice in recent years, as it allows bike fitters flexibility in achieving a comfortable position without sacrificing steering control. The drop utilizes a variable radius, allowing for multiple hand positions and deeper movement into the drop. As a result, reach to the brake lever is shorter. A 3° backsweep on the flat tops keeps the wrist in a comfortable position, essential for long days on pavement or gravel, while the 10° ramp angle provides a smooth transition to modern shifter hoods. Brake and shifter housing is elegantly hidden along the underside of the bar. - Updated distinctive Zipp cosmetics - Unidirectional carbon built for stiffness, comfort, and light weight - Flattened top shape with 3° backsweep for comfort - Variable radius drop for multiple hand positions and deeper movement into the drop. - Lifetime warranty

The SL-70 Aero is a unidirectional carbon handlebar is packed with the innovations for best-in-class fit, ergonomics, and aerodynamic performance. With its wing-shaped bar top, the SL-70 Aero features Zipp's latest bar refinements while building on the trend-setting aero legacy of the VukaSprint. The wing-shaped top was designed using Computational Fluid Dynamics (CFD). The difference of that design is real, saving 6.4 watts over a round-tube section bar top. Beyond aero performance, the SL-70 Aero features a 70mm reach to allow proper fit without compromising stem length and steering control. The revised 10° ramp angle to the brake hoods eliminates the need for up-rotated bars. The bar also provides ample wrist clearance for riding and sprinting in drops. - Updated distinctive Zipp cosmetics - 70mm reach and 128mm drop allows for a low and aero drops position - Internal cable routing is easy with Rapid Route - Lifetime warranty

Burgtec's first range of signature handlebars developed with, yes you've guessed it! Josh Bryceland. Josh loved the sweep and rise of the Ride Wide Bars but asked us to make him something a bit higher. The Rat isn't one of those guys that's 'crazy' on setup, but he knows what he wants. - 38MM RISE: Back in 2018 Josh's idea was for something more versatile that he could use on all his bikes. After testing various prototypes, he finally narrowed it down to a 38mm rise bar, the perfect sweet spot. The first material thought was Carbon but after getting to ride various Alloy prototypes he just got more comfortable on Alloy. So, the 38mm "Ride High" was born. The same unsurpassed comfort and durability as all of the Ride Wide range, but just a little Higher. - 50MM RISE: It's fair to say high rise bars have taken a back seat over the last decade much in part to the increasing wheel sizes pushing up front ends of bikes and riders trying to match their previous riding positions. After first coming to us a little over 3 years ago and deciding on the 38mm rise bar Josh wanted to quite literally raise the bar once again. We'd previously prototyped the 50mm bar alongside the 38s but at the time just felt they looked out of place. With more riders moving towards 29ers we felt the market just wasn't ready for them. Josh quickly adapted to the 38s but still felt he was running a lot of stack on his bikes. So with more frequency, he was popping in to Burgtec HQ asking if we had any of the 50mm rise bars left. In the end, we ran out of prototype bars, and Rats a very persuasive guy so we just decided to go into production with the 50s. For Josh, he loves how the higher rise allows for more maneuverability as well as getting rid of the excess stack height. Plus, being a taller rider, they keep his weight where he wants it and freely admits "It's easier on my back". The bars are a natural fit for Jump bikes but as Josh and the boys show they are equally at home on bigger travel trail bikes too. - Width: 800mm - Rise: 38mm, 50mm - Available in 35mm clamp only. - Backsweep: 9° - Upsweep: 5° - Weight: 38mm Rise = 346g, 50mm Rise = 391g

- Intended use: XC and Trail - Proven design and durability of the Race Face Next SL bar with increased stiffness and lighter weight of the 35mm platform - Manufactured from UD Carbon with matte clearcoat - Requires 35mm bar clamp diameter stem - 8 degree rearward sweep, 5 degree upward sweep

FSA's K-Force Compact Road Handlebar features a racy compact design for improved ergonomics and rider comfort. Its continuous carbon/Kevlar construction is super light and impressively stiff, making it perfect for climbing and big out-of-the-saddle efforts. It also has a 110mm center section for mounting accessories and its reinforced, textured clamping areas hold tight and secure.

Race Face's flagship carbon DH rated handlebar just got wider. With the push to 820mm the new Sixc 35 handlebar gives unprecedented control at high speed, just what you need for UCI DH races, high speed park laps, or that next challenging AM adventure. Featuring Race Face's tried and true sweep design to get you in the attack position on the bike and uses their UD carbon wrap that gives the Sixc 35 strength you can believe in at a mind numbing 235g. Save weight and gain control? You just lost an excuse… - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - Gold Standard of DH is now wider and stronger - 820mm width for maximum control

Dimension's Urban Cruiser Bar is a great way to customize your ride. Available in a variety of configurations to suit your needs and style. - Material: Aluminum - Lever Compatability: Mountain 22.2mm

- Economical 6066 aluminum alloy mountain handlebar - 800mm width - 3 rise options - Back sweep: 7° - 310-350g (Depending on rise dimension)

A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress. - Material: Carbon monocoque with forged alloy steerer clamp - Stem Angle: 84 -degree - Drop/Reach: 126/75mm(Measured center-to-center where the levers mount) - Sweep/Flare: 4.7/1-degree - Features mounting holes for computer/accessory mount - Matte UD carbon finish - Weight: 350g (42cm x 100mm)

- The second version of the Fatbar has undergone a full structural re-design. - In keeping with the demand for wider, gravity oriented handlebars, the width increased to 800mm. - Proven high grade 7050 T6 aluminium and variable gauge taperwall construction

- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.

- 12° moderately flared, medium width drop bar balances off-road performance, with on-road aerodynamics and comfort - Vibrocore foam core reduces transmission of harmful frequencies of vibration, and increases bar fatigue life and ultimate strength - Short 110mm drop and 65mm reach geometry is perfect for aggressive riding stance and long days in the saddle on mixed terrain - 31.8mm bar clamp zone, and aerodynamic ergo top section enhances hand comfort over longer rides, without limiting range of rider/hand positions - 21.6mm inner diameter barends, allow use of most barend shifters - KEY TECHNOLOGIES: Vibrocore, On-Off Road Geometry - MATERIAL: Zirconium Doped 7-Series Alloy - WIDTH HOOD TO HOOD (c-c): 420 / 440 / 460mm - WIDTH BAREND to BAREND (o-o): 498 / 518 / 538mm - WEIGHT: 355 / 360 / 365g - DROP / REACH: 10mm / 65mm (all sizes) - BAR CLAMP / TOP SECTION: 31.8mm Ergo Profile - FLARE: 12° - RAMP: 14°

The No.7 6F is our take on a modern performance drop bar. Sleek, ergonomically designed curves end in a wrist-friendly 6-degree flare at the drops. This gives just enough space to open your chest and provides forearm clearance in the drop position. This modern design offers seamless transitions between positions. The 6F features a slightly deeper drop than our 12F and 24F handlebars. Available in a complete size range so you can dial in your fit.

After years of research and development dedicated to perfecting the 35mm bore handlebar, DEITY has created the best-feeling carbon line of handlebars to date. Gone are the days of blown-out hands and varying degrees of arm pump after a day on your new 35mm bore oversized super-stiff handlebar. Our all-new Skywire Carbon Trail handlebar delivers the same level of strength and comfort you've come to expect from DEITY with a very specific focus on increased performance and time on the bike. Perfectly spec'd at 800mm wide with 15mm and 25mm rise options, this beauty promises to keep you on the bike longer with a shorter recovery between rides. - Oversized 35mm Bore Carbon Handlebar - Designed for Enduro / All Mountain / Trail - Developed and designed exclusively with our own in house DEITY molds - Unidirectional Carbon Construction - Damping properties reduce hand fatigue - 800mm Width - 9 degree bend x 5 degree upsweep - The ultimate combination of strength, weight, and ride quality - Textured non slip stem clamping surface - Textured grip ends for added bite - Covered by our Lifetime Crash Replacement Policy to the original owner - Recommended MAX Torque Spec range (4 - 4.5 Nm) - 15mm rise: 222 grams - 25mm rise: 226 grams

The handlebar of choice for the Scott / Velosolutions and Norco Factory Racing World Cup teams, the BLACKLABEL 800 is the evolution of over a decade of DEITY handlebar development. By widening the center bore area, we could increase strength while still delivering an incredibly comfortable, stable, and responsive feel that is unmatched. This premium race good is built for championships! - 800mm width - Designed for DH / Enduro / All MTN applications - Dirt Mag Top 100 Product - 4 years running for 2014, 2015, 2016, and 2018 - Incredibly detailed two-tone bead blast and polished ano finish - 9-degree bend / backsweep by 5-degree upsweep - Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology - Designed for maximum ride quality with a 31.8mm bore - World Cup DH / Redbull Rampage / Crankworx and FMB World Tour proven - The handlebar of choice for the Scott / Velosolutions and Norco Factory Racing World Cup teams - Features measured cut marks and center alignment detail - Covered by our Lifetime Crash Replacement Policy to the original owner - 15mm rise: 333g - 25mm rise: 342g - 38mm rise: 343g

Our Ibis Carbon Hi-Fi and Lo-Fi handlebars are adjustable. Using two 25mm wide aluminum inserts that thread into the ends of the bar, you can easily swap between 750mm and 800mm. Or, you can cut the inserts to any measurement in between. - 31.8mm stem clamp diameter - Maximum of 6nm recommended for stem clamp torque - 5 Degree Rise - 9 Degree Sweep - Lo Fi offers a 10mm rise - Hi Fi offers a 30mm rise - Bar comes WITH aluminum end inserts. - Weight: 256g & 236g without inserts installed.

The Salsa Cowchipper provides comfort, control, and efficiency for long days in the saddle, whether road touring, crushing mixed surfaces, or conquering the Great Divide. While the Cowchipper retains some resemblance of a traditional road bar, its radical 24° flare in the drops boosts leverage, stability, and comfort dramatically. - Lightweight and strong 7050-T6 series aluminum alloy construction - 116mm drop, 68mm reach, 24° flare angle, 12° drop angle - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - Weight: 293g (44cm)

- Unique multi-use bar with excellent ergonomics - Shot peened 6061 aluminium - 2" forward bend from clamp area negates the need to change stems to make up for the grip area sweep. - 1.5" rise for ideal positioning - Bars can be flipped for another take on moustache bars

The Sparrow is a touring/townie bar. - The 495mm version is more agile for squeezing through traffic than other townie/MTB bars. - The 520mm is still narrow, but with a grip area that fits levers and shifters. - The 560mm size is better for climbing and single-speeders. Try all the sizes on a single-speed or fixie. - Can be used flipped to be used as a riser bar or down for a less upright position. - Shotpeened Tange Aluminum - 25.4 mm clamp diameter - 50mm drop/rise - 55° backsweep - 22.2mm grip diameter, 20.0mm inside diameter at ends to allow use of pursuit levers. - Weight 245g (495mm)

- 6061-T12 aluminum with round, Compact bend and a shallow drop - easy to reach brake lever positioning - Drop: 130mm - Reach: 75mm